Homogeneous System Copy - Installation of Database Instance not possible...
I try to create a SAP NetWeaver 7.0 SR3 Portal based on a homogeneous SAP System Copy. Therefore I already installed in a first step (first option within SAPINST for installing a target system of a system copy) the Central Services Instance successfully on a machine. In the next step I'd like to create the Database Instance with SAPINST but I cannot choose the DB instance that I already created based on a restore within the new DB server (MS SQL 2008 Cluster installation). I can only choose the local machine for using a DB instance but there is no MS SQL Server installed!
Do I have to start SAPINST on the DB server itself which is not possible/allowed (due to operating/organization reasons)?
Is there any SAPINST parameter which I have to use for telling SAPINST that the DB is located on a different server?!?
The documentation just says:
The target system is installed using the exports from the source system.
Choose the installation services exactly in the order they appear. For more information, see the MS SQL Server installation guide for your SAP system at http://service.sap.com/installnw70.
On the SAPinst screen SAP SystemDatabase make sure to select Homogeneous System Copy (MS SQL Server-specific: Detach/Attach or Backup).
Thanks for supporting and Regards,
Claudio Schmidt
OK, SAP Note 1076022 says:
SAP installation packages on SAP Service Marketplace
On March 27, 2008, SAP released the Netweaver installation package SR3, which supports SQL Server 2008 (R2). Note 1152240 discusses the details and lists some restrictions. Make sure you carefully read Note 1152240 and use a recent enough installation master DVD.
SAP Note 1152240 says:
If you want to perform a system copy of an SAP system that is based on SAP NetWeaver 7.0 SR3 on SQL Server 2008 (R2), you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace (SMP). Instead, you have to do the following:
- Patch your runtime libraries as described in SAP note 684106
- Use a modified Installation Master DVD. For more information, see section "IV Creating a modified Installation Master DVD".
- Use a modified Kernel DVD. For more information about how to create a modified kernel DVD, see SAP note 1480785.
What problem is fixed by using the modified Installation Master DVD? Is it possible to install the DB part on a server apart of the local machine where SAPINST is run (my initial question/problem I want do resolve)?
Regards,
Claudio
Similar Messages
-
Some errors after doing the system copy for DB2 database instance
HI,
Recently we have transferred the DB2 database instance from old host( db 9.1.7 under windows 2003 R2) to new host( DB2 9.7.9 under windows 2008 R2) using the system copy database depending methods.
Currently system is:
* ECC 6.0 under NW 7.0 SR3
* Kernel : 7.20
* Basis: 7.0 with support package level 17
*application instance connecting db instance via DB2 CLI
1) a) After log in system using the T-code: SM21 to read the system log, it will record the bellow error:
b) From the log taken from log fie: dev_w*, i also found the below error:
A ABAP Program SAPMSSY2 .
A Source RSBTCTRC Line 60.
A Error Code DBIF_RSQL_SQL_ERROR.
A Module $Id: //bas/720_REL/src/krn/runt/absapsql.c#28 $ SAP.
A Function ab_HandleRsqlErrors Line 716.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A SQL error in the database when accessing a table..
c) any background job will be cancelled when it is running. I think the error is related to above mentioned issue.
2) If i go to T-code: DB13---Diagnostics----db2 logs, it will come out the below error:
Thanks.HI Manas,
Yes, this problem is with particular this table.
Refer to below error coming from db2diag.log when i access the table:BTCCTL:
2014-08-12-17.52.08.866000+480 I35784932F1196 LEVEL: Severe
PID : 3380 TID : 2676 PROC : db2syscs.exe
INSTANCE: DB2DV1 NODE : 000 DB : DV1
APPHDL : 0-127 APPID: *LOCAL.DB2DV1.140812095207
AUTHID : DB2DV1
EDUID : 2676 EDUNAME: db2agent (DV1) 0
FUNCTION: DB2 UDB, data management, sqldSetupIndexScan, probe:1873
MESSAGE : ZRC=0x82040001=-2113667071=SQLD_NONSEVERE_PRGERR
"non-severe dms programming error"
DIA8532C An internal processing error has occurred.
DATA #1 : String, 39 bytes
Specified index not found for scan open
DATA #2 : String, 12 bytes
sqldScanOpen
CALLSTCK:
[0] 0x000000018010E989 pdLog + 0x353
[1] 0x0000000003ABE3C2 sqlzSetAndLog901 + 0x192
[2] 0x0000000001E61F01 sqldSetupIndexScan + 0xF37
[3] 0x0000000001E5F5CC sqldScanOpen + 0xBEE
[4] 0x000000000334F460 sqlriopn + 0x316
[5] 0x00000000034AE788 sqlritaSimplePerm + 0x252
[6] 0x000000000336AC8B sqlriSectInvoke + 0x139
[7] 0x00000000030A6F0C sqlrr_process_fetch_request + 0x1A8
[8] 0x00000000030A2902 sqlrr_open + 0x534
[9] 0x000000000223FCCB sqljs_ddm_opnqry + 0x447
2014-08-12-17.52.08.866000+480 I35786130F533 LEVEL: Error
PID : 3380 TID : 2676 PROC : db2syscs.exe
INSTANCE: DB2DV1 NODE : 000 DB : DV1
APPHDL : 0-127 APPID: *LOCAL.DB2DV1.140812095207
AUTHID : DB2DV1
EDUID : 2676 EDUNAME: db2agent (DV1) 0
FUNCTION: DB2 UDB, data management, sqldSetupIndexScan, probe:1873
DATA #1 : unsigned integer, 4 bytes
10
DATA #2 : unsigned integer, 4 bytes
1704
DATA #3 : unsigned integer, 2 bytes -
SAP Netweaver 7.02 installation problem, "Start Instance" not possible??
Hello,
i need help with my "new" Problem during installation of SAP Netweaver, everything is ok until "Phase 21 of 24'" is reached,
here should the instance started, i receive this error:
"An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :ABAP processes of instance NSP/DVEBMGS00 [ABAP: STARTING] did not start after 10:10 minutes. Giving up.)."
I can see in the SAPmmc that msg_server.exe ist started and is green, but disp+work.exe is yellow and have a status:
"Running but dialog queue stand still."
That all make me confuse, why is there a such big difference in 32 and 64bit installtion?
I have this problem only on windows 7 64bit. on 32bit windows i nave never problems with installation.
Can anyone help me here please?
If need more information i can put here some logfiles?
Thanks for any help
MirsoHere is the next file dew_w0:
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 6896
M
M
M Thu Aug 07 20:23:20 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 6896) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 00000000029A0050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M
M Thu Aug 07 20:23:21 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:23:23 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:23:24 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C
C Thu Aug 07 20:23:25 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202325, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 202324 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014830050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014C70050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CC80050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000002E30050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000002F70050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002B00050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208D0160, size: 30000000, end: 000000002256C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022570160, size: 10240000, end: 0000000022F34160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F40170, size: 4194304, end: 0000000023340170)
B dbexpbuf: Buffer ESM (addr: 0000000023350170, size: 4194304, end: 0000000023750170)
B dbexpbuf: Buffer CUA (addr: 0000000023760170, size: 3072000, end: 0000000023A4E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A50170, size: 4194304, end: 0000000023E50170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000133FFCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1500D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D150530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002B20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N
N Thu Aug 07 20:23:26 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:23:27 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 6896
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 6896) [dpnttool.c 339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 7620
M
M
M Thu Aug 07 20:28:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7620) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DE60050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DE60060
M DpShMCreate: allocated wp_adm_list at 000000000DE63030
M DpShMCreate: allocated wp_adm at 000000000DE63220
M DpShMCreate: allocated tm_adm_list at 000000000DE6AE00
M DpShMCreate: allocated tm_adm at 000000000DE6AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E3ADD60
M DpShMCreate: allocated appc_ca_adm at 000000000E3BD770
M DpShMCreate: allocated comm_adm at 000000000E3CD180
M DpShMCreate: allocated slock_adm at 000000000E45BB20
M DpShMCreate: allocated file_adm at 000000000E481CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E4C3730
M DpShMCreate: allocated vmc_adm at 000000000E4C37E0
M DpShMCreate: allocated gw_adm at 000000000E4CADA0
M DpShMCreate: allocated j2ee_adm at 000000000E4CADE0
M DpShMCreate: allocated ca_info at 000000000E4CBD50
M DpShMCreate: allocated wall_adm at 000000000E4CBD70
M DpCommAttachTable: attached comm table (header=000000000E3CD180/ft=000000000E3CD190)
M DpSesCreateTable: attached session table at 0000000002C50050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:28:45 2014
M ThInit: running on host BIG
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C
C Thu Aug 07 20:28:46 2014
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202845, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 202845 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014780050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014BC0050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CBD0050, size: 2767448)
M SHM_PAGING_ADM (addr: 00000000124B0050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000012540050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002EF0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208B0160, size: 30000000, end: 000000002254C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022550160, size: 10240000, end: 0000000022F14160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F20170, size: 4194304, end: 0000000023320170)
B dbexpbuf: Buffer ESM (addr: 0000000023330170, size: 4194304, end: 0000000023730170)
B dbexpbuf: Buffer CUA (addr: 0000000023740170, size: 3072000, end: 0000000023A2E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A30170, size: 4194304, end: 0000000023E30170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001334FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D1B0530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002F20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W PpioRecoverLocks, table: 000007FFE04EDB30
W PpioRecoverLocks, number of file locks 256
W PpioRecoverLocks: file lock set to: 0000000000000000
W PpioRecoverLocks: directory lock set to: 0000000000000000
W PpioRecoverLocks: global lock set to: 0000000000000000
W PpioRecoverLocks() done
W PprcRecoverLocks, table: 000007FFE04EE020
W PprcRecoverLocks: directory lock set to: 0000000000000000
W PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:28:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 7620
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7620) [dpnttool.c 339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 7828
M
M
M Thu Aug 07 20:33:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7828) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 0000000002990050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:33:44 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:33:45 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807203345, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 203345 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014760050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014BA0050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CBB0050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000005930050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000005A60050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002BC0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000020890160, size: 30000000, end: 000000002252C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022530160, size: 10240000, end: 0000000022EF4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F00170, size: 4194304, end: 0000000023300170)
B dbexpbuf: Buffer ESM (addr: 0000000023310170, size: 4194304, end: 0000000023710170)
B dbexpbuf: Buffer CUA (addr: 0000000023720170, size: 3072000, end: 0000000023A0E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A10170, size: 4194304, end: 0000000023E10170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M
M Thu Aug 07 20:33:46 2014
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001322FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1900D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D190530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002BE0050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W PpioRecoverLocks, table: 000007FFE04EDB30
W PpioRecoverLocks, number of file locks 256
W PpioRecoverLocks: file lock set to: 0000000000000000
W PpioRecoverLocks: directory lock set to: 0000000000000000
W PpioRecoverLocks: global lock set to: 0000000000000000
W PpioRecoverLocks() done
W PprcRecoverLocks, table: 000007FFE04EE020
W PprcRecoverLocks: directory lock set to: 0000000000000000
W PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:33:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 7828
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7828) [dpnttool.c 339]
// END OF FILE
i hope that we can bring my sap to runing?
best regards
mirso -
Help !!! Homogeneous system copy hold on step: Create Database
Group,
we use homogeneous system copy to install PRD system. The system hold on step : create databse.
When we check the server and found the data library has been restored from tape. The installation just hold on the step and can't going on. And there is not additional information on install directory except to see the file keydb.xml were updated.
Could we adjust the file keydb.xml to continue the installation ? If we could, how ? Thanks in advance.
Regards.
JennyHi Jenny,
The first question would be:
Is the database restored properly ?
How many objects are in there ?
First stop the SAPinst program so that no "duplicate updates" happen on the log/xml files.
Most likely you are doing this on another server and therefore the old users are not available which creates an error during restore. This causes often/always an abnormal end of the SAPinst.
If this is the case, you might want to check the keydb.xml after that you copied that and search for "ERROR" in uppercase and the finally try to set this to OK. If you then rerun SAPinst, this problem is hopefully solved. Unfortunately this is more or less an "standard-error" in this procedure - at least up to 1 year ago I don't know on any generic solution. That's why I do not use this procedure if not really necessary.
Regards
Volker Güldenpfennig
P.S.: Do not forget to distribute forum points as in the last questions - otherwise, you will receive less and less answers ... -
MSSQL Homogeneous System Copy : SAPINST cannot connect to default database
Hello.
We want to perform a homogeneous system copy, following Note 151603.
We have attached the source DB (RP1) to the destination DB (RD4) following the above mentioned Note.
Now, logged to the server as DOMAIN\rd4adm , we want to execute the SAPINST, as indicated in the Note 683447, but when giving the password for user rd4adm we get a pop up
Cannot connect to R3SVIL\RD4 [SQL Server]Cannot open user default database. Login failed.
R3SVIL is the server. Login is done with windows authentication (connected as domain\rd4adm)
We cannot find a Note descibing this issue and how to fix it, must be something with user : does anybody have suggestion or solution?
Thanks a lot,
DinoHi,
did you apply SAP note 551915 - R/3 won't start after database restore or database copy
also check Note 806925 - SQL Error 4064: Cannot open user default database
regards,
kaushal -
Error during Homogenous System copy of ABAP+JAVA stack
Hi All,
I'm trying to do a homogeneous system copy of an XI system NW04s on Windows 2k3 and Oracle database to another windows 2k3 machine. SCS and Database went on fine but during CI installation on the target system I'm stuck at "Run ABAP Reports" phase.
I'm getting an error:
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
runRADDBDIF was executed with status ERROR
The ABAP stack is however up and when I login to 000 client using DDIC user and try to execute the report RADDBDIF, I get a runtime error RAISE_EXCEPTION with Exception condition "WRITE_FAILED" raised.
A RAISE statement in the program "SAPLSUGI" raised the exception condition "WRITE_FAILED".
If anyone has encountered similar problem, kindly help me.
Regards,
SameerHi Juan,
I've already checked dev_disp and dev_ms but didn't find any errors. However, I got some errors in dev_w0. I'm pasting the same for your reference.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Jan 07 18:45:15 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 04
M sid COP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2148
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2148) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Jan 07 18:45:16 2008
M DpShMCreate: sizeof(wp_adm) 10056 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05EC0040, size: 4883696)
M DpShMCreate: allocated sys_adm at 05EC0040
M DpShMCreate: allocated wp_adm at 05EC2090
M DpShMCreate: allocated tm_adm_list at 05EC47D8
M DpShMCreate: allocated tm_adm at 05EC4808
M DpShMCreate: allocated wp_ca_adm at 062CDC48
M DpShMCreate: allocated appc_ca_adm at 062D3A08
M DpShMCreate: allocated comm_adm at 062D5948
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06356808
M DpShMCreate: allocated gw_adm at 06356848
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06356878
M DpShMCreate: allocated wall_adm at 06356880
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host hydhtc24738
M calling db_connect ...
C Prepending F:\usr\sap\COP\DVEBMGS04\exe to Path.
C
C Mon Jan 07 18:45:18 2008
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Attaching to DB Server COP (con_hdl=0,svchp=064A2338,srvhp=064B3F34)
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now '/@COP' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=064A2338,usrhp=064FFA98)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now 'SAPSR3/<pwd>@COP' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance COP is running on HYDHTC24738 with ORACLE version 10.2.0.1.0 since JAN 07, 2008, 15:34:24
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080107 184516 HYDHTC24738
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Jan 07 18:45:22 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0AB50040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AF90040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CEE0040, size: 615040)
M SHM_PAGING_ADM (addr: 0CF80040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0D010040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0D0A0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 7, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10CD00C8, size: 30000000, end: 1296C448)
B dbtbxbuf: Buffer TABLP (addr: 129700C8, size: 10240000, end: 133340C8)
B dbexpbuf: Buffer EIBUF (addr: 133400D0, size: 4194304, end: 137400D0)
B dbexpbuf: Buffer ESM (addr: 137500D0, size: 4194304, end: 13B500D0)
B dbexpbuf: Buffer CUA (addr: 13B600D0, size: 3072000, end: 13E4E0D0)
B dbexpbuf: Buffer OTR (addr: 13E500D0, size: 4194304, end: 142500D0)
M
M Mon Jan 07 18:45:23 2008
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Mon Jan 07 18:45:26 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1965E820
S
S Mon Jan 07 18:45:27 2008
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D8C00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D8C02B0
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2236 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 4888kb, dir_size: 4856kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
A >> Shm MMADM area (addr=57E91D98 leng=126176 end=57EB0A78)
A >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
A RFC Destination> destination hydhtc24738_COP_04 host hydhtc24738 system COP systnr 4 (hydhtc24738_COP_04)
A RFC Options> H=hydhtc24738,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 7406 bytes at 0FFB0040
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\COP\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\COP\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Mon Jan 07 18:45:28 2008
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.111.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [14]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume hydhtc24738_COP_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >hydhtc24738_COP_04 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 07.01.2008 18:45:27 1199711727 / 1692
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <hydhtc24738_COP_04 >
L BtcSysStartRaise: End
S
S Mon Jan 07 18:45:36 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05E90040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05E907A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05E907E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05E907EC
S
S Mon Jan 07 18:45:44 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
B
B Mon Jan 07 18:47:27 2008
B dbmyclu : info : my major identification is 3244494858, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is DCBD22E36FC346F1BF890002E339BE1E.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
A
A Mon Jan 07 18:47:55 2008
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Mon Jan 07 18:48:02 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Mon Jan 07 18:48:03 2008
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Mon Jan 07 18:48:04 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Jan 07 18:48:04 2008
A
A ABAP Program SAPLSUGI .
A Source LSUGIU08 Line 77.
A Error Code RAISE_EXCEPTION.
A Module $Id: //bas/700_REL/src/krn/runt/abfunc.c#10 $ SAP.
A Function ab_jfune Line 2561.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Exception condition "WRITE_FAILED" raised..
A
S
S Mon Jan 07 18:53:35 2008
S found spool memory service RSPO-ACTIONS at 1D8C9978
B
B Mon Jan 07 20:31:35 2008
B table logging switched off for all clients
Regards,
Sameer -
Homogeneous System Copy on Windows/Oracle.
Hi!
I have to start a project on Homogeneous System Copy on Windows/Oracle.
I have gone through the System Copy documents by SAP and also verious SAP note (spl. 659509 ). But still I am not really clear about the whole process.
As per my understanding, as follows :
1. Export the Database from Source Host. <b>But HOW? Wheather I have to use any System Tool from SAP ? </b>
<b>Copy that to Target Host.</b>
2. <b>Install the CI in Target Host. As I am working on SAP 4.7 1.10 (SR1) with Kernel 6.20 (NU).</b>
3. At the time of installation of DI in Target Host give the path of Exoprt fileset.
My question :
<b>1. Wheather my plan is right or needs change?</b>
2. What type of copy it will be :
a) Homogeneous System Copy using Online / Offline Database Backup.
b) Homogeneous System Copy using R3LOAD Procedure.
c) Homogeneous System Copy using R3COPY Procedure.
<b>3. Do I really need to download/order any system copy tool from SAP?</b>
My Source :
SAP 4.7 on Windows 2000 with Oracle 8.1.7 with noarchivelog mode.
Terget :
SAP 4.7 on Windows 2003 with Oracle9.2.0.8
All Kernel : 620 (NU)
Looking for an urgent solution.
With Kind Regards,
Pratip BhattacharyyaHi! Umesh,
I have found 2 errore .
1) ORA-01652: unable to extend temp segment by 2560 in tablespace PSAPTEMP
2) DbSl Trace: ORA-1403 when accessing table SAPUSER
Two things I want to mention here.
1. I donot know the passwd of datadase users of Source . I have used different passwd for Target DB userd.
2. Used defferent SAP SID. Source : ID4 and Target : IDN
Is that cause any harm?
Here is the detail logs of those two files.
<b><i>SAPSSEXC.log</i></b>
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222010532
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -ctf I G:\Export/DATA/SAPSSEXC.STR C:\SAPinst ORACLE SAPINST_di/DDLORA.TPL C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.TSK ORA -l C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.log
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222010532
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222010539
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.cmd -l C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\idn\928 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPIDN's password
DbSl Trace: Connecting as /@IDN on connection 0 ...
DbSl Trace: Attaching to DB Server IDN (con_hdl=0,svchp=0146C57C,svrhp=0146E82C)
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPIDN/<pwd>@IDN on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance idn is running on DLWSDV10 with ORACLE version 9.2.0.8.0 since 20061222
Fri Dec 22 01:05:39 2006
***LOG BZA=> table SVERS does not exist on database [dblink#1 @ 1292] [dblink 1292 ]
(DB) INFO: connected to DB
(GSI) INFO: dbname = "IDN20061222121231 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "DLWSDV10 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "DLWSDV10"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) INFO: BCACT created
(IMP) INFO: import of BCACT completed (0 rows)
(DB) INFO: BCACT~0 created
(DB) INFO: BCCOM created
(IMP) INFO: import of BCCOM completed (0 rows)
(DB) INFO: BCCOM~0 created
(DB) INFO: BCEXC created
(IMP) INFO: import of BCEXC completed (0 rows)
(DB) INFO: BCEXC~0 created
(DB) INFO: BCRES created
(IMP) INFO: import of BCRES completed (0 rows)
(DB) INFO: BCRES~0 created
(DB) INFO: BCSPO created
(IMP) INFO: import of BCSPO completed (0 rows)
(DB) INFO: BCSPO~0 created
(DB) INFO: BCTOU created
(IMP) INFO: import of BCTOU completed (0 rows)
(DB) INFO: BCTOU~0 created
(DB) INFO: BRATEXT created
(IMP) INFO: import of BRATEXT completed (914265 rows)
(DB) INFO: BRATEXT~0 created
(DB) INFO: BTCSED created
(IMP) INFO: import of BTCSED completed (623 rows)
(DB) INFO: BTCSED~0 created
(DB) INFO: CD0T000 created
(IMP) INFO: import of CD0T000 completed (0 rows)
(DB) INFO: CD0T000~0 created
(DB) INFO: CD0T120TAB created
(IMP) INFO: import of CD0T120TAB completed (0 rows)
(DB) INFO: CD0T120TAB~0 created
(DB) INFO: CD0T130TAB created
(IMP) INFO: import of CD0T130TAB completed (0 rows)
(DB) INFO: CD0T130TAB~0 created
(DB) INFO: CD0T140TAB created
(IMP) INFO: import of CD0T140TAB completed (0 rows)
(DB) INFO: CD0T140TAB~0 created
(DB) INFO: CD0T500TAB created
(IMP) INFO: import of CD0T500TAB completed (0 rows)
(DB) INFO: CD0T500TAB~0 created
(DB) INFO: CD2APP0 created
(IMP) INFO: import of CD2APP0 completed (0 rows)
(DB) INFO: CD2APP0~0 created
(DB) INFO: CD2HV1PTAB created
(IMP) INFO: import of CD2HV1PTAB completed (0 rows)
(DB) INFO: CD2HV1PTAB~0 created
(DB) INFO: CD2HV2FTAB created
(IMP) INFO: import of CD2HV2FTAB completed (0 rows)
(DB) INFO: CD2HV2FTAB~0 created
(DB) INFO: CNTLWARN created
(IMP) INFO: import of CNTLWARN completed (0 rows)
(DB) INFO: CNTLWARN~0 created
(DB) INFO: D010INC created
(IMP) INFO: import of D010INC completed (3599971 rows)
(DB) INFO: D010INC~0 created
(DB) INFO: D010INC~1 created
(DB) INFO: D010TAB created
(IMP) INFO: import of D010TAB completed (11017270 rows)
DbSl Trace: ORA-1652 occured when executing SQL statement (parse error offset = 35)
DbSl Trace: sc_p=013ED590,no=20,idc_p=00000000,con=0,act=0,slen=187,smax=256,#vars=0,stmt=01E1A0C8,table=
DbSl Trace: CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (\
DbSl Trace: INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) ;
<b>(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1652)
error message returned by DbSl:
ORA-01652: unable to extend temp segment by 2560 in tablespace PSAPTEMP
DbSl Trace: Disconnecting from connection 0 ...</b>
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=0146C57C,srvhp=0146E82C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222011210
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222023556
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.cmd -l C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\idn\928 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPIDN's password
DbSl Trace: Connecting as /@IDN on connection 0 ...
DbSl Trace: Attaching to DB Server IDN (con_hdl=0,svchp=0146C57C,svrhp=0146E82C)
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPIDN/<pwd>@IDN on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance idn is running on DLWSDV10 with ORACLE version 9.2.0.8.0 since 20061222
(DB) INFO: connected to DB
(GSI) INFO: dbname = "IDN20061222121231 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "DLWSDV10 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "DLWSDV10"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) ERROR: DDL statement failed
(DROP INDEX "D010TAB~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-1652 occured when executing SQL statement (parse error offset = 35)
DbSl Trace: sc_p=013ECFEC,no=1,idc_p=00000000,con=0,act=0,slen=187,smax=256,#vars=0,stmt=01E06DA8,table=
DbSl Trace: CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (\
DbSl Trace: INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) ;
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1652)
error message returned by DbSl:
ORA-01652: unable to extend temp segment by 2560 in tablespace PSAPTEMP
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=0146C57C,srvhp=0146E82C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222023612
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222031914
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.cmd -l C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\idn\928 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPIDN's password
DbSl Trace: Connecting as /@IDN on connection 0 ...
DbSl Trace: Attaching to DB Server IDN (con_hdl=0,svchp=0146C57C,svrhp=0146E82C)
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPIDN/<pwd>@IDN on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance idn is running on DLWSDV10 with ORACLE version 9.2.0.8.0 since 20061222
(DB) INFO: connected to DB
(GSI) INFO: dbname = "IDN20061222121231 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "DLWSDV10 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "DLWSDV10"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) ERROR: DDL statement failed
(DROP INDEX "D010TAB~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-1652 occured when executing SQL statement (parse error offset = 35)
DbSl Trace: sc_p=013ECFEC,no=1,idc_p=00000000,con=0,act=0,slen=187,smax=256,#vars=0,stmt=01E06DA8,table=
DbSl Trace: CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (\
DbSl Trace: INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) ;
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1652)
error message returned by DbSl:
ORA-01652: unable to extend temp segment by 2560 in tablespace PSAPTEMP
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=0146C57C,srvhp=0146E82C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222031938
<b><u>SAPAPPL0.log</u></b>
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222010528
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -ctf I G:\Export/DATA/SAPAPPL0.STR C:\SAPinst ORACLE SAPINST_di/DDLORA.TPL C:\SAPinst ORACLE SAPINST_di/SAPAPPL0.TSK ORA -l C:\SAPinst ORACLE SAPINST_di/SAPAPPL0.log
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222010530
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222010539
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE SAPINST_di/SAPAPPL0.cmd -l C:\SAPinst ORACLE SAPINST_di/SAPAPPL0.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\idn\928 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPIDN's password
DbSl Trace: Connecting as /@IDN on connection 0 ...
DbSl Trace: Attaching to DB Server IDN (con_hdl=0,svchp=0146C57C,svrhp=0146E82C)
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPIDN/<pwd>@IDN on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance idn is running on DLWSDV10 with ORACLE version 9.2.0.8.0 since 20061222
Fri Dec 22 01:05:39 2006
***LOG BZA=> table SVERS does not exist on database [dblink#1 @ 1292] [dblink 1292 ]
(DB) INFO: connected to DB
(GSI) INFO: dbname = "IDN20061222121231 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "DLWSDV10 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "DLWSDV10"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) INFO: /1SAP1/FC_TFG200 created
(IMP) INFO: import of /1SAP1/FC_TFG200 completed (3 rows)
(DB) INFO: /1SAP1/FC_TFG200~0 created
(DB) INFO: /1SAP1/FC_TFG201 created
(IMP) INFO: import of /1SAP1/FC_TFG201 completed (2 rows)
(DB) INFO: /1SAP1/FC_TFG201~0 created
(DB) INFO: /1SAP1/FC_TFG300 created
(IMP) INFO: import of /1SAP1/FC_TFG300 completed (3 rows)
(DB) INFO: /1SAP1/FC_TFG300~0 created
(DB) INFO: /1SAP1/FC_TFG301 created
(IMP) INFO: import of /1SAP1/FC_TFG301 completed (4 rows)
(DB) INFO: /1SAP1/FC_TFG301~0 created
(DB) INFO: /SAPDMC/LSCDOCU created
(IMP) INFO: import of /SAPDMC/LSCDOCU completed (25 rows)
(DB) INFO: /SAPDMC/LSCDOCU~0 created
(DB) INFO: /SAPDMC/LSCDOCUT created
(IMP) INFO: import of /SAPDMC/LSCDOCUT completed (200 rows)
(DB) INFO: /SAPDMC/LSCDOCUT~0 created
(DB) INFO: /SAPDMC/LSCRULE created
(IMP) INFO: import of /SAPDMC/LSCRULE completed (15 rows)
(DB) INFO: /SAPDMC/LSCRULE~0 created
(DB) INFO: /SAPDMC/LSCRULET created
(IMP) INFO: import of /SAPDMC/LSCRULET completed (119 rows)
(DB) INFO: /SAPDMC/LSCRULET~0 created
(DB) INFO: /SAPDMC/LSCSTEPS created
(IMP) INFO: import of /SAPDMC/LSCSTEPS completed (62 rows)
(DB) INFO: /SAPDMC/LSCSTEPS~0 created
(DB) INFO: /SAPDMC/LSCSTEPT created
(IMP) INFO: import of /SAPDMC/LSCSTEPT completed (495 rows)
(DB) INFO: /SAPDMC/LSCSTEPT~0 created
(DB) INFO: /SAPDMC/LSCVERSN created
(IMP) INFO: import of /SAPDMC/LSCVERSN completed (19 rows)
(DB) INFO: /SAPDMC/LSCVERSN~0 created
(DB) INFO: /SAPDMC/LSGBDCA created
(IMP) INFO: import of /SAPDMC/LSGBDCA completed (74 rows)
(DB) INFO: /SAPDMC/LSGBDCA~0 created
(DB) INFO: /SAPDMC/LSGBDCS created
(IMP) INFO: import of /SAPDMC/LSGBDCS completed (74 rows)
(DB) INFO: /SAPDMC/LSGBDCS~0 created
(DB) INFO: /SAPDMC/LSGBDCT created
(IMP) INFO: import of /SAPDMC/LSGBDCT completed (74 rows)
(DB) INFO: /SAPDMC/LSGBDCT~0 created
(DB) INFO: /SAPDMC/LSGCUST created
(IMP) INFO: import of /SAPDMC/LSGCUST completed (0 rows)
(DB) INFO: /SAPDMC/LSGCUST~0 created
(DB) INFO: /SAPDMC/LSGSUB created
(IMP) INFO: import of /SAPDMC/LSGSUB completed (166 rows)
(DB) INFO: /SAPDMC/LSGSUB~0 created
(DB) INFO: /SAPDMC/LSGUSDFI created
(IMP) INFO: import of /SAPDMC/LSGUSDFI completed (16 rows)
(DB) INFO: /SAPDMC/LSGUSDFI~0 created
(DB) INFO: /SAPDMC/LSMCUST created
(IMP) INFO: import of /SAPDMC/LSMCUST completed (0 rows)
(DB) INFO: /SAPDMC/LSMCUST~0 created
(DB) INFO: /SAPDMC/LSOALG created
(IMP) INFO: import of /SAPDMC/LSOALG completed (1250 rows)
(DB) INFO: /SAPDMC/LSOALG~0 created
(DB) INFO: /SAPDMC/LSOATT created
(IMP) INFO: import of /SAPDMC/LSOATT completed (269 rows)
(DB) INFO: /SAPDMC/LSOATT~0 created
(DB) INFO: /SAPDMC/LSOLOG created
(IMP) INFO: import of /SAPDMC/LSOLOG completed (461 rows)
(DB) INFO: /SAPDMC/LSOLOG~0 created
(DB) INFO: /SAPDMC/LSOPAR created
(IMP) INFO: import of /SAPDMC/LSOPAR completed (1421 rows)
(DB) INFO: /SAPDMC/LSOPAR~0 created
(DB) INFO: /SAPDMC/LSOREC created
(IMP) INFO: import of /SAPDMC/LSOREC completed (56 rows)
(DB) INFO: /SAPDMC/LSOREC~0 created
(DB) INFO: /SAPDMC/LSOTXT created
(IMP) INFO: import of /SAPDMC/LSOTXT completed (455 rows)
(DB) INFO: /SAPDMC/LSOTXT~0 created
(DB) INFO: /SAPDMC/LSRATT created
(IMP) INFO: import of /SAPDMC/LSRATT completed (304 rows)
(DB) INFO: /SAPDMC/LSRATT~0 created
(DB) INFO: /SAPDMC/LSRTXT created
(IMP) INFO: import of /SAPDMC/LSRTXT completed (308 rows)
(DB) INFO: /SAPDMC/LSRTXT~0 created
(DB) INFO: /SAPDMC/LSUCUST created
(IMP) INFO: import of /SAPDMC/LSUCUST completed (22 rows)
(DB) INFO: /SAPDMC/LSUCUST~0 created
(DB) INFO: /SAPDMC/LSUMENU created
(IMP) INFO: import of /SAPDMC/LSUMENU completed (0 rows)
(DB) INFO: /SAPDMC/LSUMENU~0 created
(DB) INFO: /SAPDMC/LSUPROF created
(IMP) INFO: import of /SAPDMC/LSUPROF completed (19 rows)
(DB) INFO: /SAPDMC/LSUPROF~0 created
(DB) INFO: /SAPNEA/MR3_SODT created
(IMP) INFO: import of /SAPNEA/MR3_SODT completed (0 rows)
(DB) INFO: /SAPNEA/MR3_SODT~0 created
(DB) INFO: /SAPSLL/ECPPA created
(IMP) INFO: import of /SAPSLL/ECPPA completed (0 rows)
(DB) INFO: /SAPSLL/ECPPA~0 created
(DB) INFO: /SAPSMOSS/STAT created
(IMP) INFO: import of /SAPSMOSS/STAT completed (9 rows)
(DB) INFO: /SAPSMOSS/STAT~0 created
(DB) INFO: /SAPSMOSS/STATT created
(IMP) INFO: import of /SAPSMOSS/STATT completed (171 rows)
(DB) INFO: /SAPSMOSS/STATT~0 created
(DB) INFO: /SAPSMOSS/TURL created
(IMP) INFO: import of /SAPSMOSS/TURL completed (4 rows)
(DB) INFO: /SAPSMOSS/TURL~0 created
(DB) INFO: /SAPTRX/APARPRF created
(IMP) INFO: import of /SAPTRX/APARPRF completed (0 rows)
(DB) INFO: /SAPTRX/APARPRF~0 created
(DB) INFO: /SAPTRX/APARPRFT created
(IMP) INFO: import of /SAPTRX/APARPRFT completed (0 rows)
(DB) INFO: /SAPTRX/APARPRFT~0 created
(DB) INFO: /SAPTRX/ASFCTEV created
(IMP) INFO: import of /SAPTRX/ASFCTEV completed (40 rows)
(DB) INFO: /SAPTRX/ASFCTEV~0 created
(DB) INFO: /SAPTRX/ASFCTEVT created
(IMP) INFO: import of /SAPTRX/ASFCTEVT completed (88 rows)
(DB) INFO: /SAPTRX/ASFCTEVT~0 created
(DB) INFO: /SAPTRX/ASFCTPAR created
(IMP) INFO: import of /SAPTRX/ASFCTPAR completed (305 rows)
(DB) INFO: /SAPTRX/ASFCTPAR~0 created
(DB) INFO: /SAPTRX/ASFCTPAT created
(IMP) INFO: import of /SAPTRX/ASFCTPAT completed (671 rows)
(DB) INFO: /SAPTRX/ASFCTPAT~0 created
(DB) INFO: /SAPTRX/ASPARDC created
(IMP) INFO: import of /SAPTRX/ASPARDC completed (0 rows)
(DB) INFO: /SAPTRX/ASPARDC~0 created
(DB) INFO: /SAPTRX/ASPARDCT created
(IMP) INFO: import of /SAPTRX/ASPARDCT completed (0 rows)
(DB) INFO: /SAPTRX/ASPARDCT~0 created
(DB) INFO: /SAPTRX/SCSOMAP created
(IMP) INFO: import of /SAPTRX/SCSOMAP completed (0 rows)
(DB) INFO: /SAPTRX/SCSOMAP~0 created
(DB) INFO: /SAPTRX/SOLUTN created
(IMP) INFO: import of /SAPTRX/SOLUTN completed (0 rows)
(DB) INFO: /SAPTRX/SOLUTN~0 created
(DB) INFO: /SAPTRX/SOLUTNT created
(IMP) INFO: import of /SAPTRX/SOLUTNT completed (0 rows)
(DB) INFO: /SAPTRX/SOLUTNT~0 created
(DB) INFO: /SDF/STGLTRAN created
(IMP) INFO: import of /SDF/STGLTRAN completed (0 rows)
(DB) INFO: /SDF/STGLTRAN~0 created
(DB) INFO: /SOMO/INPUTTAB created
(IMP) INFO: import of /SOMO/INPUTTAB completed (12 rows)
(DB) INFO: /SOMO/INPUTTAB~0 created
(DB) INFO: A000 created
(IMP) INFO: import of A000 completed (0 rows)
(DB) INFO: A000~0 created
(DB) INFO: A002 created
(IMP) INFO: import of A002 completed (68 rows)
(DB) INFO: A002~0 created
(DB) INFO: A008 created
(IMP) INFO: import of A008 completed (0 rows)
(DB) INFO: A008~0 created
(DB) INFO: A011 created
(IMP) INFO: import of A011 completed (28 rows)
(DB) INFO: A011~0 created
(DB) INFO: A013 created
(IMP) INFO: import of A013 completed (68 rows)
(DB) INFO: A013~0 created
(DB) INFO: A014 created
(IMP) INFO: import of A014 completed (62 rows)
(DB) INFO: A014~0 created
(DB) INFO: A020 created
(IMP) INFO: import of A020 completed (2 rows)
(DB) INFO: A020~0 created
(DB) INFO: A027 created
(IMP) INFO: import of A027 completed (16 rows)
(DB) INFO: A027~0 created
(DB) INFO: A029 created
(IMP) INFO: import of A029 completed (0 rows)
(DB) INFO: A029~0 created
(DB) INFO: A031 created
(IMP) INFO: import of A031 completed (0 rows)
(DB) INFO: A031~0 created
(DB) INFO: A033 created
(IMP) INFO: import of A033 completed (8 rows)
(DB) INFO: A033~0 created
(DB) INFO: A034 created
(IMP) INFO: import of A034 completed (0 rows)
(DB) INFO: A034~0 created
(DB) INFO: A035 created
(IMP) INFO: import of A035 completed (56 rows)
(DB) INFO: A035~0 created
(DB) INFO: A036 created
(IMP) INFO: import of A036 completed (56 rows)
(DB) INFO: A036~0 created
(DB) INFO: A037 created
(IMP) INFO: import of A037 completed (56 rows)
(DB) INFO: A037~0 created
(DB) INFO: A038 created
(IMP) INFO: import of A038 completed (56 rows)
(DB) INFO: A038~0 created
(DB) INFO: A039 created
(IMP) INFO: import of A039 completed (56 rows)
(DB) INFO: A039~0 created
(DB) INFO: A040 created
(IMP) INFO: import of A040 completed (454 rows)
(DB) INFO: A040~0 created
(DB) INFO: A041 created
(IMP) INFO: import of A041 completed (0 rows)
(DB) INFO: A041~0 created
(DB) INFO: A042 created
(IMP) INFO: import of A042 completed (0 rows)
(DB) INFO: A042~0 created
(DB) INFO: A043 created
(IMP) INFO: import of A043 completed (0 rows)
(DB) INFO: A043~0 created
(DB) INFO: A048 created
(IMP) INFO: import of A048 completed (0 rows)
(DB) INFO: A048~0 created
(DB) INFO: A050 created
(IMP) INFO: import of A050 completed (2 rows)
(DB) INFO: A050~0 created
(DB) INFO: A057 created
(IMP) INFO: import of A057 completed (1364 rows)
(DB) INFO: A057~0 created
(DB) INFO: A066 created
(IMP) INFO: import of A066 completed (4 rows)
(DB) INFO: A066~0 created
(DB) INFO: A067 created
(IMP) INFO: import of A067 completed (1 rows)
(DB) INFO: A067~0 created
(DB) INFO: A068 created
(IMP) INFO: import of A068 completed (0 rows)
(DB) INFO: A068~0 created
(DB) INFO: A069 created
(IMP) INFO: import of A069 completed (0 rows)
(DB) INFO: A069~0 created
(DB) INFO: A070 created
(IMP) INFO: import of A070 completed (0 rows)
(DB) INFO: A070~0 created
(DB) INFO: A071 created
(IMP) INFO: import of A071 completed (70 rows)
(DB) INFO: A071~0 created
(DB) INFO: A072 created
(IMP) INFO: import of A072 completed (0 rows)
(DB) INFO: A072~0 created
(DB) INFO: A073 created
(IMP) INFO: import of A073 completed (159 rows)
(DB) INFO: A073~0 created
(DB) INFO: A074 created
(IMP) INFO: import of A074 completed (0 rows)
(DB) INFO: A074~0 created
(DB) INFO: A075 created
(IMP) INFO: import of A075 completed (0 rows)
(DB) INFO: A075~0 created
(DB) INFO: A076 created
(IMP) INFO: import of A076 completed (0 rows)
(DB) INFO: A076~0 created
(DB) INFO: A077 created
(IMP) INFO: import of A077 completed (0 rows)
(DB) INFO: A077~0 created
(DB) INFO: A078 created
(IMP) INFO: import of A078 completed (10 rows)
(DB) INFO: A078~0 created
(DB) INFO: A079 created
(IMP) INFO: import of A079 completed (84 rows)
(DB) INFO: A079~0 created
(DB) INFO: A080 created
(IMP) INFO: import of A080 completed (0 rows)
(DB) INFO: A080~0 created
(DB) INFO: A081 created
(IMP) INFO: import of A081 completed (1128 rows)
(DB) INFO: A081~0 created
(DB) INFO: A082 created
(IMP) INFO: import of A082 completed (0 rows)
(DB) INFO: A082~0 created
(DB) INFO: A083 created
(IMP) INFO: import of A083 completed (0 rows)
(DB) INFO: A083~0 created
(DB) INFO: A084 created
(IMP) INFO: import of A084 completed (0 rows)
(DB) INFO: A084~0 created
(DB) INFO: A085 created
(IMP) INFO: import of A085 completed (0 rows)
(DB) INFO: A085~0 created
(DB) INFO: A086 created
(IMP) INFO: import of A086 completed (0 rows)
(DB) INFO: A086~0 created
(DB) INFO: A087 created
(IMP) INFO: import of A087 completed (10 rows)
(DB) INFO: A087~0 created
(DB) INFO: A088 created
(IMP) INFO: import of A088 completed (0 rows)
(DB) INFO: A088~0 created
(DB) INFO: A089 created
(IMP) INFO: import of A089 completed (0 rows)
(DB) INFO: A089~0 created
(DB) INFO: A090 created
(IMP) INFO: import of A090 completed (42 rows)
(DB) INFO: A090~0 created
(DB) INFO: A091 created
(IMP) INFO: import of A091 completed (0 rows)
(DB) INFO: A091~0 created
(DB) INFO: A092 created
(IMP) INFO: import of A092 completed (0 rows)
(DB) INFO: A092~0 created
(DB) INFO: A093 created
(IMP) INFO: import of A093 completed (0 rows)
(DB) INFO: A093~0 created
(DB) INFO: A094 created
(IMP) INFO: import of A094 completed (0 rows)
(DB) INFO: A094~0 created
(DB) INFO: A095 created
(IMP) INFO: import of A095 completed (0 rows)
(DB) INFO: A095~0 created
(DB) INFO: A096 created
(IMP) INFO: import of A096 completed (41 rows)
(DB) INFO: A096~0 created
(DB) INFO: A097 created
(IMP) INFO: import of A097 completed (56 rows)
(DB) INFO: A097~0 created
(DB) INFO: A098 created
(IMP) INFO: import of A098 completed (2 rows)
(DB) INFO: A098~0 created
(DB) INFO: A099 created
(IMP) INFO: import of A099 completed (2 rows)
(DB) INFO: A099~0 created
(DB) INFO: A100 created
(IMP) INFO: import of A100 completed (0 rows)
(DB) INFO: A100~0 created
(DB) INFO: A101 created
(IMP) INFO: import of A101 completed (0 rows)
(DB) INFO: A101~0 created
(DB) INFO: A102 created
(IMP) INFO: import of A102 completed (0 rows)
(DB) INFO: A102~0 created
(DB) INFO: A103 created
(IMP) INFO: import of A103 completed (0 rows)
(DB) INFO: A103~0 created
(DB) INFO: A104 created
(IMP) INFO: import of A104 completed (150 rows)
(DB) INFO: A104~0 created
(DB) INFO: A105 created
(IMP) INFO: import of A105 completed (192 rows)
(DB) INFO: A105~0 created
(DB) INFO: A106 created
(IMP) INFO: import of A106 completed (0 rows)
(DB) INFO: A106~0 created
(DB) INFO: A107 created
(IMP) INFO: import of A107 completed (0 rows)
(DB) INFO: A107~0 created
(DB) INFO: A108 created
(IMP) INFO: import of A108 completed (0 rows)
(DB) INFO: A108~0 created
(DB) INFO: A109 created
(IMP) INFO: import of A109 completed (0 rows)
(DB) INFO: A109~0 created
(DB) INFO: A110 created
(IMP) INFO: import of A110 completed (0 rows)
(DB) INFO: A110~0 created
(DB) INFO: A112 created
(IMP) INFO: import of A112 completed (15 rows)
(DB) INFO: A112~0 created
(DB) INFO: A113 created
(IMP) INFO: import of A113 completed (0 rows)
(DB) INFO: A113~0 created
(DB) INFO: A114 created
(IMP) INFO: import of A114 completed (0 rows)
(DB) INFO: A114~0 created
(DB) INFO: A115 created
(IMP) INFO: import of A115 completed (0 rows)
(DB) INFO: A115~0 created
(DB) INFO: A116 created
(IMP) INFO: import of A116 completed (0 rows)
(DB) INFO: A116~0 created
(DB) INFO: A117 created
(IMP) INFO: import of A117 completed (0 rows)
(DB) INFO: A117~0 created
(DB) INFO: A118 created
(IMP) INFO: import of A118 completed (12 rows)
(DB) INFO: A118~0 created
(DB) INFO: A119 created
(IMP) INFO: import of A119 completed (0 rows)
(DB) INFO: A119~0 created
(DB) INFO: A120 created
(IMP) INFO: import of A120 completed (0 rows)
(DB) INFO: A120~0 created
(DB) INFO: A121 created
(IMP) INFO: import of A121 completed (0 rows)
(DB) INFO: A121~0 created
(DB) INFO: A122 created
(IMP) INFO: import of A122 completed (0 rows)
(DB) INFO: A122~0 created
(DB) INFO: A123 created
(IMP) INFO: import of A123 completed (0 rows)
(DB) INFO: A123~0 created
(DB) INFO: A124 created
(IMP) INFO: import of A124 completed (0 rows)
(DB) INFO: A124~0 created
(DB) INFO: A125 created
(IMP) INFO: import of A125 completed (73 rows)
(DB) INFO: A125~0 created
(DB) INFO: A126 created
(IMP) INFO: import of A126 completed (0 rows)
(DB) INFO: A126~0 created
(DB) INFO: A127 created
(IMP) INFO: import of A127 completed (0 rows)
(DB) INFO: A127~0 created
(DB) INFO: A128 created
(IMP) INFO: import of A128 completed (0 rows)
(DB) INFO: A128~0 created
(DB) INFO: A129 created
(IMP) INFO: import of A129 completed (0 rows)
(DB) INFO: A129~0 created
(DB) INFO: A130 created
(IMP) INFO: import of A130 completed (0 rows)
(DB) INFO: A130~0 created
(DB) INFO: A131 created
(IMP) INFO: import of A131 completed (0 rows)
(DB) INFO: A131~0 created
(DB) INFO: A132 created
(IMP) INFO: import of A132 completed (0 rows)
(DB) INFO: A132~0 created
(DB) INFO: A133 created
(IMP) INFO: import of A133 completed (0 rows)
(DB) INFO: A133~0 created
(DB) INFO: A134 created
(IMP) INFO: import of A134 completed (0 rows)
(DB) INFO: A134~0 created
(DB) INFO: A135 created
(IMP) INFO: import of A135 completed (0 rows)
(DB) INFO: A135~0 created
(DB) INFO: A136 created
(IMP) INFO: import of A136 completed (8 rows)
(DB) INFO: A136~0 created
(DB) INFO: A137 created
(IMP) INFO: import of A137 completed (0 rows)
(DB) INFO: A137~0 created
(DB) INFO: A138 created
(IMP) INFO: import of A138 completed (0 rows)
(DB) INFO: A138~0 created
(DB) INFO: A139 created
(IMP) INFO: import of A139 completed (0 rows)
(DB) INFO: A139~0 created
(DB) INFO: A140 created
(IMP) INFO: import of A140 completed (2 rows)
(DB) INFO: A140~0 created
(DB) INFO: A141 created
(IMP) INFO: import of A141 completed (0 rows)
(DB) INFO: A141~0 created
(DB) INFO: A142 created
(IMP) INFO: import of A142 completed (0 rows)
(DB) INFO: A142~0 created
(DB) INFO: A143 created
(IMP) INFO: import of A143 completed (0 rows)
(DB) INFO: A143~0 created
(DB) INFO: A144 created
(IMP) INFO: import of A144 completed (0 rows)
(DB) INFO: A144~0 created
(DB) INFO: A145 created
(IMP) INFO: import of A145 completed (0 rows)
(DB) INFO: A145~0 created
(DB) INFO: A146 created
(IMP) INFO: import of A146 completed (0 rows)
(DB) INFO: A146~0 created
(DB) INFO: A147 created
(IMP) INFO: import of A147 completed (0 rows)
(DB) INFO: A147~0 created
(DB) INFO: A148 created
(IMP) INFO: import of A148 completed (0 rows)
(DB) INFO: A148~0 created
(DB) INFO: A149 created
(IMP) INFO: import of A149 completed (0 rows)
(DB) INFO: A149~0 created
(DB) INFO: A152 created
(IMP) INFO: import of A152 completed (0 rows)
(DB) INFO: A152~0 created
(DB) INFO: A153 created
(IMP) INFO: import of A153 completed (0 rows)
(DB) INFO: A153~0 created
(DB) INFO: A154 created
(IMP) INFO: import of A154 completed (0 rows)
(DB) INFO: A154~0 created
(DB) INFO: A155 created
(IMP) INFO: import of A155 completed (0 rows)
(DB) INFO: A155~0 created
(DB) INFO: A156 created
(IMP) INFO: import of A156 completed (0 rows)
(DB) INFO: A156~0 created
(DB) INFO: A160 created
(IMP) INFO: import of A160 completed (7 rows)
(DB) INFO: A160~0 created
(DB) INFO: A161 created
(IMP) INFO: import of A161 completed (0 rows)
(DB) INFO: A161~0 created
(DB) INFO: A162 created
(IMP) INFO: import of A162 completed (0 rows)
(DB) INFO: A162~0 created
(DB) INFO: A173 created
(IMP) INFO: import of A173 completed (0 rows)
(DB) INFO: A173~0 created
(DB) INFO: A174 created
(IMP) INFO: import of A174 completed (0 rows)
(DB) INFO: A174~0 created
(DB) INFO: A175 created
(IMP) INFO: import of A175 completed (0 rows)
(DB) INFO: A175~0 created
(DB) INFO: A176 created
(IMP) INFO: import of A176 completed (0 rows)
(DB) INFO: A176~0 created
(DB) INFO: A177 created
(IMP) INFO: import of A177 completed (0 rows)
(DB) INFO: A177~0 created
(DB) INFO: A178 created
(IMP) INFO: import of A178 completed (0 rows)
(DB) INFO: A178~0 created
(DB) INFO: A179 created
(IMP) INFO: import of A179 completed (0 rows)
(DB) INFO: A179~0 created
(DB) INFO: A180 created
(IMP) INFO: import of A180 completed (0 rows)
(DB) INFO: A180~0 created
(DB) INFO: A185 created
(IMP) INFO: import of A185 completed (0 rows)
(DB) INFO: A185~0 created
(DB) INFO: A190 created
(IMP) INFO: import of A190 completed (0 rows)
(DB) INFO: A190~0 created
(DB) INFO: A191 created
(IMP) INFO: import of A191 completed (0 rows)
(DB) INFO: A191~0 created
(DB) INFO: A192 created
(IMP) INFO: import of A192 completed (0 rows)
(DB) INFO: A192~0 created
(DB) INFO: A193 created
(IMP) INFO: import of A193 completed (0 rows)
(DB) INFO: A193~0 created
(DB) INFO: A194 created
(IMP) INFO: import of A194 completed (0 rows)
(DB) INFO: A194~0 created
(DB) INFO: A195 created
(IMP) INFO: import of A195 completed (13 rows)
(DB) INFO: A195~0 created
(DB) INFO: A196 created
(IMP) INFO: import of A196 completed (0 rows)
(DB) INFO: A196~0 created
(DB) INFO: A197 created
(IMP) INFO: import of A197 completed (5 rows)
(DB) INFO: A197~0 created
(DB) INFO: A198 created
(IMP) INFO: import of A198 completed (0 rows)
(DB) INFO: A198~0 created
(DB) INFO: A215 created
(IMP) INFO: import of A215 completed (0 rows)
(DB) INFO: A215~0 created
(DB) INFO: A291 created
(IMP) INFO: import of A291 completed (0 rows)
(DB) INFO: A291~0 created
(DB) INFO: A292 created
(IMP) INFO: import of A292 completed (0 rows)
(DB) INFO: A292~0 created
(DB) INFO: A293 created
(IMP) INFO: import of A293 completed (0 rows)
(DB) INFO: A293~0 created
(DB) INFO: A300 created
(IMP) INFO: import of A300 completed (0 rows)
(DB) INFO: A300~0 created
(DB) INFO: A301 created
(IMP) INFO: import of A301 completed (0 rows)
(DB) INFO: A301~0 created
(DB) INFO: A304 created
(IMP) INFO: import of A304 completed (3414 rows)
(DB) INFO: A304~0 created
(DB) INFO: A305 created
(IMP) INFO: import of A305 completed (54 rows)
(DB) INFO: A305~0 created
(DB) INFO: A306 created
(IMP) INFO: import of A306 completed (0 rows)
(DB) INFO: A306~0 created
(DB) INFO: A307 created
(IMP) INFO: import of A307 completed (0 rows)
(DB) INFO: A307~0 created
(DB) INFO: A310 created
(IMP) INFO: import of A310 completed (0 rows)
(DB) INFO: A310~0 created
(DB) INFO: A311 created
(IMP) INFO: import of A311 completed (0 rows)
(DB) INFO: A311~0 created
(DB) INFO: A312 created
(IMP) INFO: import of A312 completed (0 rows)
(DB) INFO: A312~0 created
(DB) INFO: A315 created
(IMP) INFO: import of A315 completed (0 rows)
(DB) INFO: A315~0 created
(DB) INFO: A316 created
(IMP) INFO: import of A316 completed (0 rows)
(DB) INFO: A316~0 created
(DB) INFO: A317 created
(IMP) INFO: import of A317 completed (0 rows)
(DB) INFO: A317~0 created
(DB) INFO: A320 created
(IMP) INFO: import of A320 completed (0 rows)
(DB) INFO: A320~0 created
(DB) INFO: A321 created
(IMP) INFO: import of A321 completed (0 rows)
(DB) INFO: A321~0 created
(DB) INFO: A325 created
(IMP) INFO: import of A325 completed (0 rows)
(DB) INFO: A325~0 created
(DB) INFO: A326 created
(IMP) INFO: import of A326 completed (0 rows)
(DB) INFO: A326~0 created
(DB) INFO: A330 created
(IMP) INFO: import of A330 completed (0 rows)
(DB) INFO: A330~0 created
(DB) INFO: A331 created
(IMP) INFO: import of A331 completed (0 rows)
(DB) INFO: A331~0 created
(DB) INFO: A335 created
(IMP) INFO: import of A335 completed (0 rows)
(DB) INFO: A335~0 created
(DB) INFO: A336 created
(IMP) INFO: import of A336 completed (0 rows)
(DB) INFO: A336~0 created
(DB) INFO: A340 created
(IMP) INFO: import of A340 completed (0 rows)
(DB) INFO: A340~0 created
(DB) INFO: A341 created
(IMP) INFO: import of A341 completed (0 rows)
(DB) INFO: A341~0 created
(DB) INFO: A342 created
(IMP) INFO: import of A342 completed (0 rows)
(DB) INFO: A342~0 created
(DB) INFO: A343 created
(IMP) INFO: import of A343 completed (0 rows)
(DB) INFO: A343~0 created
(DB) INFO: A344 created
(IMP) INFO: import of A344 completed (0 rows)
(DB) INFO: A344~0 created
(DB) INFO: A345 created
(IMP) INFO: import of A345 completed (0 rows)
(DB) INFO: A345~0 created
(DB) INFO: A346 created
(IMP) INFO: import of A346 completed (0 rows)
(DB) INFO: A346~0 created
(DB) INFO: A347 created
(IMP) INFO: import of A347 completed (0 rows)
(DB) INFO: A347~0 created
(DB) INFO: A348 created
(IMP) INFO: import of A348 completed (0 rows)
(DB) INFO: A348~0 created
(DB) INFO: A349 created
(IMP) INFO: import of A349 completed (0 rows)
(DB) INFO: A349~0 created
(DB) INFO: A350 created
(IMP) INFO: import of A350 completed (0 rows)
(DB) INFO: A350~0 created
(DB) INFO: A352 created
(IMP) INFO: import of A352 completed (0 rows)
(DB) INFO: A352~0 created
(DB) INFO: A353 created
(IMP) INFO: import of A353 completed (0 rows)
(DB) INFO: A353~0 created
(DB) INFO: A354 created
(IMP) INFO: import of A354 completed (0 rows)
(DB) INFO: A354~0 created
(DB) INFO: A355 created
(IMP) INFO: import of A355 completed (0 rows)
(DB) INFO: A355~0 created
(DB) INFO: A356 created
(IMP) INFO: import of A356 completed (0 rows)
(DB) INFO: A356~0 created
(DB) INFO: A357 created
(IMP) INFO: import of A357 completed (0 rows)
(DB) INFO: A357~0 created
(DB) INFO: A358 created
(IMP) INFO: import of A358 completed (0 rows)
(DB) INFO: A358~0 created
(DB) INFO: A359 created
(IMP) INFO: import of A359 completed (0 rows)
(DB) INFO: A359~0 created
(DB) INFO: A362 created
(IMP) INFO: import of A362 completed (0 rows)
(DB) INFO: A362~0 created
(DB) INFO: A363 created
(IMP) INFO: import of A363 completed (0 rows)
(DB) INFO: A363~0 created
(DB) INFO: A364 created
(IMP) INFO: import of A364 completed (0 rows)
(DB) INFO: A364~0 created
(DB) INFO: A365 created
(IMP) INFO: import of A365 completed (0 rows)
(DB) INFO: A365~0 created
(DB) INFO: A366 created
(IMP) INFO: import of A366 completed (0 rows)
(DB) INFO: A366~0 created
(DB) INFO: A367 created
(IMP) INFO: import of A367 completed (0 rows)
(DB) INFO: A367~0 created
(DB) INFO: A368 created
(IMP) INFO: import of A368 completed (0 rows)
(DB) INFO: A368~0 created
(DB) INFO: A369 created
(IMP) INFO: import of A369 completed (0 rows)
(DB) INFO: A369~0 created
(DB) INFO: A371 created
(IMP) INFO: import of A371 completed (0 rows)
(DB) INFO: A371~0 created
(DB) INFO: A372 created
(IMP) INFO: import of A372 completed (0 rows)
(DB) INFO: A372~0 created
(DB) INFO: A373 created
(IMP) INFO: import of A373 completed (0 rows)
(DB) INFO: A373~0 created
(DB) INFO: A374 created
(IMP) INFO: import of A374 completed (0 rows)
(DB) INFO: A374~0 created
(DB) INFO: A375 created
(IMP) INFO: import of A375 completed (0 rows)
(DB) INFO: A375~0 created
(DB) INFO: A376 created
(IMP) INFO: import of A376 completed (0 rows)
(DB) INFO: A376~0 created
(DB) INFO: A382 created
(IMP) INFO: import of A382 completed (0 rows)
(DB) INFO: A382~0 created
(DB) INFO: A390 created
(IMP) INFO: import of A390 completed (4 rows)
(DB) INFO: A390~0 created
(DB) INFO: A392 created
(IMP) INFO: import of A392 completed (0 rows)
(DB) INFO: A392~0 created
(DB) INFO: A393 created
(IMP) INFO: import of A393 completed (0 rows)
(DB) INFO: A393~0 created
(DB) INFO: A394 created
(IMP) INFO: import of A394 completed (0 rows)
(DB) INFO: A394~0 created
(DB) INFO: A395 created
(IMP) INFO: import of A395 completed (5 rows)
(DB) INFO: A395~0 created
(DB) INFO: A396 created
(IMP) INFO: import of A396 completed (0 rows)
(DB) INFO: A396~0 created
(DB) INFO: A397 created
(IMP) INFO: import of A397 completed (0 rows)
(DB) INFO: A397~0 created
(DB) INFO: A399 created
(IMP) INFO: import of A399 completed (0 rows)
(DB) INFO: A399~0 created
(DB) INFO: A441 created
(IMP) INFO: import of A441 completed (0 rows)
(DB) INFO: A441~0 created
(DB) INFO: A502 created
(IMP) INFO: import of A502 completed (58 rows)
(DB) INFO: A502~0 created
(DB) INFO: A503 created
(IMP) INFO: import of A503 completed (7 rows)
(DB) INFO: A503~0 created
(DB) INFO: A504 created
(IMP) INFO: import of A504 completed (4 rows)
(DB) INFO: A504~0 created
(DB) INFO: A506 created
(IMP) INFO: import of A506 completed (10 rows)
(DB) INFO: A506~0 created
(DB) INFO: A507 created
(IMP) INFO: import of A507 completed (0 rows)
(DB) INFO: A507~0 created
(DB) INFO: A510 created
(IMP) INFO: import of A510 completed (0 rows)
(DB) INFO: A510~0 created
(DB) INFO: A511 created
(IMP) INFO: import of A511 completed (0 rows)
(DB) INFO: A511~0 created
(DB) INFO: A518 created
(IMP) INFO: import of A518 completed (0 rows)
(DB) INFO: A518~0 created
(DB) INFO: A599 created
(IMP) INFO: import of A599 completed (0 rows)
(DB) INFO: A599~0 created
(DB) INFO: A601 created
(IMP) INFO: import of A601 completed (3 rows)
(DB) INFO: A601~0 created
(DB) INFO: A755 created
(IMP) INFO: import of A755 completed (0 rows)
(DB) INFO: A755~0 created
(DB) INFO: A800 created
(IMP) INFO: import of A800 completed (1 rows)
(DB) INFO: A800~0 created
(DB) INFO: A801 created
(IMP) INFO: import of A801 completed (0 rows)
(DB) INFO: A801~0 created
(DB) INFO: A805 created
(IMP) INFO: import of A805 completed (0 rows)
(DB) INFO: A805~0 created
(DB) INFO: A810 created
(IMP) INFO: import of A810 completed (0 rows)
(DB) INFO: A810~0 created
(DB) INFO: A815 created
(IMP) INFO: import of A815 completed (0 rows)
(DB) INFO: A815~0 created
(DB) INFO: A816 created
(IMP) INFO: import of A816 completed (1 rows)
(DB) INFO: A816~0 created
(DB) INFO: A817 created
(IMP) INFO: import of A817 completed (0 rows)
(DB) INFO: A817~0 created
(DB) INFO: A818 created
(IMP) INFO: import of A818 completed (6 rows)
(DB) INFO: A818~0 created
(DB) INFO: A819 created
(IMP) INFO: import of A819 completed (0 rows)
(DB) INFO: A819~0 created
(DB) INFO: A900 created
(IMP) INFO: import of A900 completed (250 rows)
(DB) INFO: A900~0 created
(DB) INFO: A902 created
(IMP) INFO: import of A902 completed (0 rows)
(DB) INFO: A902~0 created
(DB) INFO: A903 created
(IMP) INFO: import of A903 completed (11 rows)
(DB) INFO: A903~0 created
(DB) INFO: A933 created
(IMP) INFO: import of A933 completed (0 rows)
(DB) INFO: A933~0 created
(DB) INFO: A940 created
(IMP) INFO: import of A940 completed (0 rows)
(DB) INFO: A940~0 created
(DB) INFO: A941 created
(IMP) INFO: import of A941 completed (0 rows)
(DB) INFO: A941~0 created
(DB) INFO: A942 created
(IMP) INFO: import of A942 completed (0 rows)
(DB) INFO: A942~0 created
(DB) INFO: A972 created
(IMP) INFO: import of A972 completed (0 rows)
(DB) INFO: A972~0 created
(DB) INFO: A973 created
(IMP) INFO: import of A973 completed (0 rows)
(DB) INFO: A973~0 created
(DB) INFO: A974 created
(IMP) INFO: import of A974 completed (0 rows)
(DB) INFO: A974~0 created
(DB) INFO: A976 created
(IMP) INFO: import of A976 completed (0 rows)
(DB) INFO: A976~0 created
(DB) INFO: A977 created
(IMP) INFO: import of A977 completed (0 rows)
(DB) INFO: A977~0 created
(DB) INFO: A994 created
(IMP) INFO: import of A994 completed (0 rows)
(DB) INFO: A994~0 created
(DB) INFO: A997 created
(IMP) INFO: import of A997 completed (0 rows)
(DB) INFO: A997~0 created
(DB) INFO: A998 created
(IMP) INFO: import of A998 completed (1 rows)
(DB) INFO: A998~0 created
(DB) INFO: A999 created
(IMP) INFO: import of A999 completed (0 rows)
(DB) INFO: A999~0 created
(DB) INFO: AAA_KEYS created
(IMP) INFO: import of AAA_KEYS completed (0 rows)
(DB) INFO: AAA_KEYS~0 created
(DB) INFO: AAA_ROLES created
(IMP) INFO: import of AAA_ROLES completed (0 rows)
(DB) INFO: AAA_ROLES~0 created
(DB) INFO: AAA_ROLES2 created
(IMP) INFO: import of AAA_ROLES2 completed (0 rows)
(DB) INFO: AAA_ROLES2~0 created
(DB) INFO: AAA_USERS created
(IMP) INFO: import of AAA_USERS completed (0 rows)
(DB) INFO: AAA_USERS~0 created
(DB) INFO: AAA_VALUES created
(IMP) INFO: import of AAA_VALUES completed (0 rows)
(DB) INFO: AAA_VALUES~0 created
(DB) INFO: AAB_ID_ACT created
(IMP) INFO: import of AAB_ID_ACT completed (0 rows)
(DB) INFO: AAB_ID_ACT~0 created
(DB) INFO: AAB_VAR_ID created
(IMP) INFO: import of AAB_VAR_ID completed (6 rows)
(DB) INFO: AAB_VAR_ID~0 created
(DB) INFO: AAB_VAR_ID~ID1 created
(DB) INFO: AAB_VAR_PROP created
(IMP) INFO: import of AAB_VAR_PROP completed (9 rows)
(DB) INFO: AAB_VAR_PROP~0 created
(DB) INFO: AAB_VAR_PROPT created
(IMP) INFO: import of AAB_VAR_PROPT completed (18 rows)
(DB) INFO: AAB_VAR_PROPT~0 created
(DB) INFO: AAF_ROLES created
(IMP) INFO: import of AAF_ROLES completed (0 rows)
(DB) INFO: AAF_ROLES~0 created
(DB) INFO: AAT_ROLES created
(IMP) INFO: import of AAT_ROLES completed (0 rows)
(DB) INFO: AAT_ROLES~0 created
(DB) INFO: AAT_USERS created
(IMP) INFO: import of AAT_USERS completed (0 rows)
(DB) INFO: AAT_USERS~0 created
(DB) INFO: AAT_VALUES created
(IMP) INFO: import of AAT_VALUES completed (0 rows)
(DB) INFO: AAT_VALUES~0 created
(DB) INFO: AAUSVAR created
(IMP) INFO: import of AAUSVAR completed (0 rows)
(DB) INFO: AAUSVAR~0 created
(DB) INFO: ABAPHTML created
(IMP) INFO: import of ABAPHTML completed (859 rows)
(DB) INFO: ABAPHTML~0 created
(DB) INFO: ABAPTREE created
(IMP) INFO: import of ABAPTREE completed (487 rows)
(DB) INFO: ABAPTREE~0 created
(DB) INFO: ABAPTREET created
(IMP) INFO: import of ABAPTREET completed (7814 rows)
(DB) INFO: ABAPTREET~0 created
(DB) INFO: ABDOCMODE created
(IMP) INFO: import of ABDOCMODE completed (78 rows)
(DB) INFO: ABDOCMODE~0 created
(DB) INFO: ACAC_OBJECTS created
(IMP) INFO: import of ACAC_OBJECTS completed (0 rows)
(DB) INFO: ACAC_OBJECTS~0 created
(DB) INFO: ACAC_OBJECTS~1 created
(DB) INFO: ACCRBD created
(IMP) INFO: import of ACCRBD completed (0 rows)
(DB) INFO: ACCRBD~0 created
(DB) INFO: ACCRBD~1 created
(DB) INFO: ACCRFI created
(IMP) INFO: import of ACCRFI completed (0 rows)
(DB) INFO: ACCRFI~0 created
(DB) INFO: ACEDSASSGMT created
(IMP) INFO: import of ACEDSASSGMT completed (0 rows)
(DB) INFO: ACEDSASSGMT~0 created
(DB) INFO: ACEDSOH created
(IMP) INFO: import of ACEDSOH completed (0 rows)
(DB) INFO: ACEDSOH~0 created
(DB) INFO: ACEDSOI created
(IMP) INFO: import of ACEDSOI completed (0 rows)
(DB) INFO: ACEDSOI~0 created
(DB) INFO: ACEDSOP created
(IMP) INFO: import of ACEDSOP completed (0 rows)
(DB) INFO: ACEDSOP~0 created
(DB) INFO: ACEOBJ created
(IMP) INFO: import of ACEOBJ completed (0 rows)
(DB) INFO: ACEOBJ~0 created
(DB) INFO: ACEOBJ~001 created
(DB) INFO: ACE_SOP_DESTINTN created
(IMP) INFO: import of ACE_SOP_DESTINTN completed (0 rows)
(DB) INFO: ACE_SOP_DESTINTN~0 created
(DB) INFO: ACE_SOP_FFVERSNS created
(IMP) INFO: import of ACE_SOP_FFVERSNS completed (1 rows)
(DB) INFO: ACE_SOP_FFVERSNS~0 created
(DB) INFO: ACE_SOP_FFVRSTXT created
(IMP) INFO: import of ACE_SOP_FFVRSTXT completed (18 rows)
(DB) INFO: ACE_SOP_FFVRSTXT~0 created
(DB) INFO: ACE_SOP_INVERSNS created
(IMP) INFO: import of ACE_SOP_INVERSNS completed (0 rows)
(DB) INFO: ACE_SOP_INVERSNS~0 created
(DB) INFO: ACE_SOP_INVRSTXT created
(IMP) INFO: import of ACE_SOP_INVRSTXT completed (0 rows)
(DB) INFO: ACE_SOP_INVRSTXT~0 created
(DB) INFO: ACE_SOP_REFKEY created
(IMP) INFO: import of ACE_SOP_REFKEY completed (0 -
Homogeneous System Copy to Upgrade Propouse
Hi all,
We're pretending to do a Homogeneous System Copy from a SAP ECC 5.0 that runs on Windows_X64 Server with DB2 8.1 . The target DB release is DB2 9.5 ( Windows_X64 Server).
We've read from IBM Help Page that DB2 8.2 it can be upgraded directlly to 9.x.
What is the right roadmap?
OPTION 1:
Backup offline of old DB2 8.1 enviroment.
- Run sapinst install centrall instance
- Run sapinst to install Database instance with 9.5 RDBMS full installation.
- Restore backup from 8.1 ?
or it will be:
OPTION 2:
Backup offline of old DB2 8.1 enviroment.
- Run sapinst install centrall instance
- Run sapinst to install Database instance with DB2/UDB RDBMS V8 FP18 Windows_X64 Server - Full Install .
- Restore backup from 8.1
- Upgrade to 9.5 ?
Thanks a lot !Hi,
are you really using DB2 V8.1 ( DB2 V8 with fixpack level < 7 ) ?
not sure if OPTION 1 works since your DB2 V8 version is so old. Is it an option to upgrade your fixpack level on your source database first and apply OPTION 1 afterwards.
Regards
Frank -
Homogeneous system copy for 4.7.x.1.1 windows/oracle 9.2.0.3.0
I plan Homogeneous system copy for 4.7.x.1.1 windows/oracle at a
customer
downloaded tools(do I have to put extracted files on the sorce machine
in kernel directory?):
MIGMON_2-20001410
MIGMON_2-20001410.SAR
MIGTIME_2-20001410
MIGTIME_2-20001410.SAR
ORABRCOPY_2-20001410
ORABRCOPY_2-20001410.SAR
SAPCAR_5-10002026
SAPCAR_5-10002026.EXE
SPLIT_2-20001410
SPLIT_2-20001410.SAR
I would have additional questions.
1. In note 516246(System copy for SAP Systems based on SAP Web AS 6.20)
it is mentioned to download the latest version of R3LDCTL and apply it
to the system. I have following questions:
under service.sap.com/patches
i found only
R3LDCTL
Support Package SAP KERNEL 4.5B 32-BIT Windows Server on IA32 32bit
ORACLE
Is this file ok?(I will perform a homogeneous system copy of an 4.7x1.1
system)
If the file is ok what is meant as apply?(put it in kernel directory?)
2. Very similar question applies to file R3szchk
under service.sap.com/patches I found only
R3szchk
Support Package SAP KERNEL 4.6C 32-BIT Windows Server on IA32 32bit
ORACLE
Is this file ok?(I will perform a homogeneous system copy of an 4.7x1.1
system)
3.In same note(516246) the SAPinst CD is mentioned. How could I get it?
4.On the Source system I have kernel 640. I guess I have to copy the
content of this directory to the target system also. But in which phase?hi,
first my question GGG
-> by which means do you plan to copy? brbackup/brrestore? r3copy? r3load?
ad 1.
SAPNet -> Patches -> Add. Components -> SAP Kernel -> 32 BIT (uni oder non-uni depending on your environment) -> SAP Kernel 6.40 32-bit -> Windows Srv -> Oracle -> R3ldctl_6-20000185.SAR (13.07.2006) is the right file (your kernel is 6.40!!!)
ad 2.
SAPNet -> Patches -> Add. Components -> SAP Kernel -> 32 BIT (uni oder non-uni depending on your environment) -> SAP Kernel 6.40 32-bit -> Windows Srv -> Oracle -> R3szchk_12-20000185.SAR is the right file (your kernel is 6.40!!!)
ad 3.
SAPNet -> SWDC (= Downloads) -> Download -> Inst. and Upgrades -> Entry by applic. group -> SAP Applic. Components -> SAP R/3 Enterprise -> Ent. 47X110 -> Installation -> Windows Server -> Oracle -> CD SAP R3E 4.7x1.10 SR1 SAPINST ORACLE (CD N° 51019679)
ad 4.
not really....it depends on the strategy (see my question above)...you first install the database software (oracle), then the central instance using sapinst, afterwards you will install the database instance using sapinst as well; while installing the db instance you have to chose db copy (or homogeneous copy, system copy) as the "database installation method" if you choose to copy the database files or did a backup if you choose to use the export/import method (using standard r3load) you will use the SystemCopy method as well but you will point (later on) to the directory where you (source) db export lies.
brrestore or copy method:
=========================
sapinst will popup at the appropriate point that the db load has to be done and depending on your strategy you have either to restore or copy files...
by the way: did you already export/backup/copy your source system?
if any further questions arise feel free to post
GreetZ, AH -
Homogeneous System Copy on VMWare
We are executing a Homegeneous System Copy of (based on the+ Homogeneous and Heterogeneous system Copy for SAP Systems Based on SAP Web Application Server Java 6.40 Patch Collection+ Installation Guide) on windows 2003 server, following the Oracle 9.1 patch 4 especific procedure.
Tha SAPints export in the source system and import in the target system finisihes successfully. But the J2EE instance doesn´t work, apparently there is no dispatcher.
At first, we thought that we miss a step on the system copy installation, but after 5 unsuccessfully installations we are looking around ...and this question arises; we are working in a virtualized environment with VMWare ¿does it affects? ¿does it has something to do?
help woul be great and awardedHi,
I did not have success with backup and restore, so I used java dump.
Maybe you got a wrong password somewhere, but I doubt because you install is sucessful.
Important steps I had to do :
Update jdbc drivers for oracle. Changed database settings for autostart with os.
Copied FSDB folders, shared them. Modified autorisations on oracle and fsdb folders.
Verify ume connection (active directory) : No ume, j2ee crash.
Brad -
Solaris Cluster Server Homogeneous System Copy
Hi,
We have SAP ECC 6.0 on Solaris Sparc server. Our database is Oracle 10.2.0.2. We will buy 2 new solaris server and we want to use these server as cluster. We want to make homogeneous system copy from current server to new cluster server. How can we make homogeneous copy from current server to new cluster server? Firts of all do we have to install new ECC 6.0 on cluster server and then will we make homogeneous system copy?
Also how can we install ECC 6.0 on Solaris Cluster server? Will we have install ECC 6.0 seperatly for each server of cluster unit? I have SAP installation document but it is not clear. Do you have another document for SAP installation on cluster server? Please help us about these issues.
Best regards.First to move your ECC system from your current server to the new server, yes you do need to homogenous copy. There are other methods like storage sub-system level copy, but it is not supported. Since your system is ABAP, you can setup standby database on the new server and use dataguard to replicate database. You can manual move profiles, binaries and other application file systems manually since they are on external storage. You should change your profiles to use logical hostname instead of the physical hostname though Solaris 10 gives you the ability to move zone/containers with same hostname.
I am assuming you have distributed system, ie database and SAP separate. You can setup RAC for database HA. For SAP, you can use sun cluster or veritas cluster to move SAP central instance with the logical hostname to the 2nd standby server.
You can also separate ASCS from SAP central instance and setup failover for the CS instance with the cluster software. Check notes 821904, 870652. You can take another step in HA with ENQ replication (see http://help.sap.com/saphelp_nw70/helpdata/EN/36/67973c3f5aff39e10000000a114084/content.htm)
-Regards -
Urgent Help Homogenous System copy
Hello!
We have SAP Portal 6.0 ABAP+JAVA WAS640, in Windows 2003 and Oracle
9.2.x.
We are updating our devellopment environment, doing a Homogeneous
System copy using the R3load copy method.
Creating the ABAP Database Instance in the target system, in step
Database Load, SAPINST ask a Migration Key...
Any suggestion ?
Thanks in advance.
Arnaldo Calaçda.About migration key go to http://service.sap.com/migrationkey and also take it.
But usually it is required at heterogeneous system copy,you do not need to enter any migration key (for a homogeneous system copy). Describe your system more full and read the migration log, for exemple can be such as Note 747773
Award if helpful. Regards. -
Installation of Database instance on server where database is already exist
Hi All,
We have a separate oracle database team who have copied one of the database using oracel backup restore procedure. This database is in 10g and it is working fine from oracle perspective.
Now as a basis admin i need to install database instance using the existing database. I should not overwrite this existing database but i should attach this existing database while installation of database instace.
I have done normal installation using sapinst and installation export but not done this type of installation as yet.
I am not aware about which option of sapinst i should use for installation of database instance so that it can use the existing database without overwriting it OR if i go with normal way will it able to catch the existing database and give me the option to attah it instead of overwriting it?
Request you all to let me know how to go about it.
Thanks & RegardsAll, Thanks for replying
Please find below answer to some of your quries.
1) Yes, This is ABAP only installation.
2) The database is oracle and the file systems on database server are as per SAP standard.
So as per Sunny,
Only way forward is to install the database instance using system copy method of back restore.
I have a mail from my senior, saying
"Normally, sapinst should sense database, SAPERP schema owner and you should be all set.
If that does not happen, as soon as sapinst pauses - so you may continue with Oracle Universal Installer in a different window
,you should STOP (abandon) the Database Instance install phase."
Here is the query.
1) "you should STOP (abandon) the Database Instance install phase."
I am not sure how to stop OR abandon the database instnace install phase. Do anyone knows this?
Thanks fore your reply
Regards -
Homogeneous System Copy using DB6 specific procedure
Hello all,
I'd like to do homogeneous system copy from source system(hostname: host01) to target system(hostname: host02) using DB2 backup/restore procedure.
Because SAP database has some tables related their hostname, I think it cause some conflicts between target system's hostname(host02) and the records in the new database on target system(it still remains "host01").
Can I avoid this conflicts if I use DB6 redirected restore method?
Or do I have to do R3load export/import like hetero system copy?
I know I can start SAP system when I set SAPLOCALHOST=host01 in instance profile on host02, but is there any other good workaround?
I wonder how you will do if you face this situation.
Any comments would be appreciated.
Regards, IkueHi dirk,
Thank you for your reply.
As you mentioned, System copy often brings changing hostname, so the post processing in the SAP's Guide should cover all of influences.
I had thought SAP database does not contain hostname entries anymore, but, I found one table which contains DBHOST name in ECC database: SAP<SID>.DB6NAVSYST
ex) SID=ST8, hostname=athens
athens:db2st8 66> db2 "select DBHOST from SAPST8.DB6NAVSYST"
DBHOST
athens
1 record(s) selected.
Can I believe these entries will be adjusted during System Copy operation along SAP's Guide(both DB2 backup/restore and R3load)?
If Yes, when does adjusting occur? (at post processing or during SAPinst?)
I have very negative impression of changing hostname of SAP system since I read Note 8307...
Does SAP support change hostname if I do System Copy?
Best regards,
Ikue -
Homogeneous System Copy asking Migration key
Hi All,
I am doing homogeneous system copy but in middle system show pop of asking migration key. As per sap doc system not ask migration key for homogeneous system copy.my scenario is
Source System : OS - Windows 2003 Server Standard Edition
Database - IBM DB2 for Linux, Unix,and Windows
SAP - ECC IDES IS Health Care SR2
Target System : OS - Windows 2003 Server Standard Edition
Database - IBM DB2 for Linux, Unix,and Windows
SAP - ECC IDES IS Health Care Sr2
Please help me / guide me.
Regards,
KumarIf you are performing an Homogeneous System Copy, no migration key is
needed. The migration key is needed ONLY if you are changing your operating
system or your database version, that is, you are doing an Heterogeneous
System Copy.
Please read the installation guide carefully, if you do any pre-steps wrongly..i.e enter wrong parameters...
Vincent
Maybe you are looking for
-
My t430 is running a little sluggish although no major problems except chronic failure to update windows and real audio driver failure to launch. This is my first laptop and I've really been enjoying it so I don't want to make any mistake when I refo
-
Unable to stream SMIL files unless the html page, swf file and the smil ffile are on the FMS server.
When I place the .swf, smil and http files on the FMS server the SMIL stream test sample works fine But When I move the files to my web server I get Connection error. This is the same issue discussed in http://forums.adobe.com/thread/554107 I added a
-
Help , sound blaster audigy ga
I have format my computer and lost my cd's and i have problem to find my true drivers I connect the sound blaster with coxial cable to my souround syster 5. and even in dvd and in the surround mixer on test only the front speakrs are working... pleas
-
it continues to say it is backign up, even though their is nothing to back up! I even downloaded and updated my ipod and itunes, and even restored my ipod, it wont let me add any music since it wont allow me to sync it. PLEASE! I NEED HELP!
-
APP - Currency problem while printing
Hi, The company code currency is EUR. when I raise a payment with EUR while running the APP program then I am not able to take a print out of the cheque but when i raise a payment with USD I am able to take a print out of the cheque in APP Inshort I