Homogeneous System copy of ABAP+JAVA stack ( PI )

Hi everyone,
I am planing to do Homogeneous system copy of our existing NW 7.0 SR3 PI System ( ABAP + JAVA).
Can anyone help me with step by step details to do in source system and target system?
Thanks..

Hi,
You should follow the system copy guide for the different option while doing the system copy
- database dependent
- R3load based (export/import)
The following document you can use as a reference, (note -this has been done on database dependent method)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f055cbd0-97f1-2a10-c09a-907b811de000
Regards,
Debasis

Similar Messages

Error during Homogenous System copy of ABAP+JAVA stack

Hi All,
I'm trying to do a homogeneous system copy of an XI system NW04s on Windows 2k3 and Oracle database to another windows 2k3 machine. SCS and Database went on fine but during CI installation on the target system I'm stuck at "Run ABAP Reports" phase.
I'm getting an error:
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
runRADDBDIF was executed with status ERROR
The ABAP stack is however up and when I login to 000 client using DDIC user and try to execute the report RADDBDIF, I get a runtime error RAISE_EXCEPTION with Exception condition "WRITE_FAILED" raised.
A RAISE statement in the program "SAPLSUGI" raised the exception condition "WRITE_FAILED".
If anyone has encountered similar problem, kindly help me.
Regards,
Sameer

Hi Juan,
I've already checked dev_disp and dev_ms but didn't find any errors. However, I got some errors in dev_w0. I'm pasting the same for your reference.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Jan 07 18:45:15 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 04
M sid COP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2148
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2148) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Jan 07 18:45:16 2008
M DpShMCreate: sizeof(wp_adm) 10056 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05EC0040, size: 4883696)
M DpShMCreate: allocated sys_adm at 05EC0040
M DpShMCreate: allocated wp_adm at 05EC2090
M DpShMCreate: allocated tm_adm_list at 05EC47D8
M DpShMCreate: allocated tm_adm at 05EC4808
M DpShMCreate: allocated wp_ca_adm at 062CDC48
M DpShMCreate: allocated appc_ca_adm at 062D3A08
M DpShMCreate: allocated comm_adm at 062D5948
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06356808
M DpShMCreate: allocated gw_adm at 06356848
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06356878
M DpShMCreate: allocated wall_adm at 06356880
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host hydhtc24738
M calling db_connect ...
C Prepending F:\usr\sap\COP\DVEBMGS04\exe to Path.
C
C Mon Jan 07 18:45:18 2008
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Attaching to DB Server COP (con_hdl=0,svchp=064A2338,srvhp=064B3F34)
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now '/@COP' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=064A2338,usrhp=064FFA98)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now 'SAPSR3/<pwd>@COP' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance COP is running on HYDHTC24738 with ORACLE version 10.2.0.1.0 since JAN 07, 2008, 15:34:24
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080107 184516 HYDHTC24738
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Jan 07 18:45:22 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0AB50040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AF90040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CEE0040, size: 615040)
M SHM_PAGING_ADM (addr: 0CF80040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0D010040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0D0A0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 7, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10CD00C8, size: 30000000, end: 1296C448)
B dbtbxbuf: Buffer TABLP (addr: 129700C8, size: 10240000, end: 133340C8)
B dbexpbuf: Buffer EIBUF (addr: 133400D0, size: 4194304, end: 137400D0)
B dbexpbuf: Buffer ESM (addr: 137500D0, size: 4194304, end: 13B500D0)
B dbexpbuf: Buffer CUA (addr: 13B600D0, size: 3072000, end: 13E4E0D0)
B dbexpbuf: Buffer OTR (addr: 13E500D0, size: 4194304, end: 142500D0)
M
M Mon Jan 07 18:45:23 2008
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Mon Jan 07 18:45:26 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1965E820
S
S Mon Jan 07 18:45:27 2008
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D8C00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D8C02B0
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2236 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 4888kb, dir_size: 4856kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
A >> Shm MMADM area (addr=57E91D98 leng=126176 end=57EB0A78)
A >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
A RFC Destination> destination hydhtc24738_COP_04 host hydhtc24738 system COP systnr 4 (hydhtc24738_COP_04)
A RFC Options> H=hydhtc24738,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 7406 bytes at 0FFB0040
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\COP\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\COP\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Mon Jan 07 18:45:28 2008
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.111.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [14]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume hydhtc24738_COP_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >hydhtc24738_COP_04 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 07.01.2008 18:45:27 1199711727 / 1692
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <hydhtc24738_COP_04 >
L BtcSysStartRaise: End
S
S Mon Jan 07 18:45:36 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05E90040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05E907A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05E907E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05E907EC
S
S Mon Jan 07 18:45:44 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
B
B Mon Jan 07 18:47:27 2008
B dbmyclu : info : my major identification is 3244494858, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is DCBD22E36FC346F1BF890002E339BE1E.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
A
A Mon Jan 07 18:47:55 2008
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Mon Jan 07 18:48:02 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Mon Jan 07 18:48:03 2008
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Mon Jan 07 18:48:04 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Jan 07 18:48:04 2008
A
A ABAP Program SAPLSUGI .
A Source LSUGIU08 Line 77.
A Error Code RAISE_EXCEPTION.
A Module $Id: //bas/700_REL/src/krn/runt/abfunc.c#10 $ SAP.
A Function ab_jfune Line 2561.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Exception condition "WRITE_FAILED" raised..
A
S
S Mon Jan 07 18:53:35 2008
S found spool memory service RSPO-ACTIONS at 1D8C9978
B
B Mon Jan 07 20:31:35 2008
B table logging switched off for all clients
Regards,
Sameer

Homogeneous System Copy of ABAP+JAVA Sy - sapinst does not restart after re

Hi everybody!
Someone can help me?
I am doing system copy CRM 2007 (NW 7) from DEV to Sandbox system. after database recovery sap is unable to make connection to database (DB is up and running). R3trans -d finished with 0012.
My question is how to change database schema after system copy. this might be the reason sap is not coming up.
Please advise.

Hi Andy,
Did you change the tnsnames.ora file to point to your new sid?
What does the trans.log output say?
(Just a curious question, but did you apply your sap license for the copied system)
Rocco

Steps for System Refresh for ABAP + JAVA stack

Hi friends,
I am newbie to SAP BASIS adminstration. There is a system refresh activity planned shortly.
Can someome pls let me know the steps for system refresh of ABAP + JAVA stack??
regards,
Ambarish.

Please check [systemcopy@SDN|System Copy and Migration] and [guides|http://service.sap.com/instguidesnw] according to your release.

System copy for ABAP+JAVA system using SAPINST method

Dear support,
We have recently upgraded to ECC 6.0 system and we have been still doing system copy by using backup and restore method. I know its wrong.
which involves below steps , this old methos works fine for ABAP engine and evreything looks ok.But java engine will not work.
So we need to use SAPINST method as described in note 785848 and system copy guide available on OSS. But i am really not able to understand sequence
for tasks to be carried out in this SAPINST method.
Can anybody list few sequence along with step by step procedure as i mentioned below for old system copy procedure.
Is it really difficult to make that for SAPINST as everybody says refer to standard guide and note ?
Anybody if possible can make the same way as i did below , i think it would rather be small as far as my understanding after reading those docs.
Simple old system copy procedure works for ABAP is as:
Run the following command on source system.
a. Login as <sid>adm
b. svrmgrl
c. connect internal
d. alter database backup controlfile to trace;
e. exit;
f. Above command will generate a .trc file in /oracle/P01/saptrance/usertrace directory.
g. Copy the text from CREATE CONTROLFILE until the ( and paste it in to any new .sql or controlfile.sql file.
h. Copy the controlfile.sql to target system.
i. Edit the file and replace the entire source SID to target SID.
j. Edit the reuse database command with the set database command
Copy the aft generated during the backup file from the source system to target system. (/oracle/<SID>/sapbackup)
a. Change all the source <SID> to target <SID>.
b. Only don't change the backup volume name it must be target system <SID>.
c. Copy the above aft file name line from the source back<SID>.log to target<SID>.log file.
5. Shutdown the target server instance.
6. From this onwards all the command on the target system only.
a. Login as <SID>adm
b. run the SAPDBA
c. select J (Restore/Recovery)
d. select B (Full restore and recovery)
e. select A (Select backup of type)
f. Select the offline backup which you want to restore.
g. It will take some time to restore.
h. Once the database is restored login as <SID>adm and run the
i. svrmgrl
j. connect internal;
k. startup nomount (if the database is already mounted shutdown it using the shutdown command)
l. run the following command
m. @controlfile.sql (file name of the control file contains the CREATE CONTROLFILE statement)
n. After the run the above command it should give the "Statement Processed)
o. alter database open resetlogs.
I am really looking forward to see anybody take some time out to prepare this kind of step by step procedure.
It would be of greate help for all of us for performing system copy with sapinst method.
Looking forward for your support.
Best Regards,
AjitR

Hi,
As per the guide you need to do source system Technical Preparations, in that running the export preparation is also one. You need to run this first before you start the export, if and only if export will successful if preparation is successful.
Yes you need to create the export directory to take the export copy of source system, it may be any where in your server. It should be having 6 to 8 GB free space.No need to create the export directory in target system, after export is completed in the source system you copy the export directory to the target system.
Target system
Yes you need to take the back up file system and delete all the contents of the directory.
Yes it can be considered as fresh system installation but copy of source system.
Yes the process follows after you giving the export directory path .
Next screen you will get the database drop and recreate screen chouse the drop and recreate method
Next J2EE user name and password
Next DDIC password
Next you have to give kernel and oracle client dvd path
Next Parameter checking screen here if you are selected database drop and recreate you have to revise the oracle database system option
If you are selecting review next screen is database advance option you have to select the advanced option
Next you have to select following option to recreate
1 Sapdata directory mapping
2 Database instance file system
3 Create database parameter
4 Create tablespace
Next screen sapdata directory creating
Next screen you can just click next no need to change any setting
Next table creation
Next screen specify oracle instance directories
Next again parameter checking and last this is last screen
Next will be the execution screen
Reward points if usefull

System copy NW04S ABAP+Java same host

Hi All
I have this dev system ECC 6.0 (SAP_SID and DB_SID: D01) ABAPJava system and enterprise portal 7.0 (SAP_SID and DB_SID: P01) on the same host (hostname: host1). Now I need to do a system copy of the D01 ABAPJava system to build new system D02 on the same host - host1. Its Oracle 10g/Solaris 10.
My understanding is, after all preparations, to run sapinst with the 'database-independent procedure' to export ABAP+Java at the same time, which creates the Migration Export CD image. Does anyone know of any issues with system copies on the same host? I think I dont need to install Oracle software as its already there, right? I need to get the oracle and sap directories created for the new system D02, please correct me.
Thanks
Ali

Hi,
My understand was have the same installation of ABAP+JAVA ( UR CASE) which will install oracle and everything else auto...and lauch sapinst >> system copy >> then export to anyfolder, move that folder to target system. In target system, launch sapinst >> system copy>> and import.
Thanks,
Feel free to revert back.

System Copy from ABAP Stack to ABAP+Java Stack

Hi,
Is it possible to system copy (homogeneous or heterogeneous) from a system based on ABAP Stack to a system based on ABAP+Java Stack? Is it the normal system copy procedure or something aditional is required to do. Pl. advise. Thanks
regards
Edited by: Abdus Samad on Oct 24, 2008 8:13 AM

It depends on what you want to copy, a system copy will always wipe out the existing target. But if you want to only copy data, you might be able to do a client copy. You can start with this SAP note: [552711 - FAQ: Client copy|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=552711]
Regards Michael

Help in ABAP+JAVA Homogeneous System copy

Dear BASIS Gurus,
We have SRM 4.0, Portal 6.0, BW 3.5 and XI 3.0 based on WAS 640, all with
ABAP+JAVA stacks in HP-UX B.11/Oracle 9.2.x.
We are planning Homogeneous System copies to refresh our Development
environment.
After reading the instguides, I'm a litle confused about the best
strategy to use.
Using SAPINST in the source System to export the Database, I have the
dump files with Database data.
Do I must run SAPINST again to get the JAVA data (both database and
filesystem data)?
In the target system do I must do two runs of SAPINST ? One for ABAP
and other for JAVA?
Yhanks in adavnce.
Best regards.
Arnaldo Calçada.

Hi Arnaldo,
There are basically two method of performing system copy.
1. Using database tool (you can use backup/restore procedure)
2. Using SAPINST tool (export/import)
This is applicable for both ABAP and JAVA.
Do I must run SAPINST again to get the JAVA data (both database and
filesystem data)?
It depends which method you are using.
In the target system do I must do two runs of SAPINST ? One for ABAP
and other for JAVA?
Yes if you are using 2nd method.
Hope this will help.
-Pinkle

Homogeneous System copy for Netweaver 2004S SR1 ABAP+JAVA- Oracle/windows

Hi All,
I am planning to do Homogeneous System copy of our production system to New Test system which SID is different from production system. I don't want to do system copy through SAPinst(R3load) because I cannot down our production server. I want to create the New test system from the offline back.
I have already installed our new system. I want to do system copy through Oracle-Specific Procedure as mentioned in the system copy documents.
Could you please tell me how to do sytem copy step by step and how to change the SID.
Thanks in advance.
Harish

Hi Rohit,
When I am trying to create the control files then I am getting following errors :
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'%ORACLE_HOME%\DATABASE\DBS1%ORACLE_SID%.ORA'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified
As per the oracle procedure I have deleted all three control files from the target system. after copied the sapdata files,origlogA,mirorlogB. I have also copied the control.sql and init<target_SID>.ora file which I created on the source system with the compand ora_br_copy.
I have copied control.sql. in the install_dir of the and init<target_SID>.ora in \oracle\SID\102\database directory.
could you please let me know why this error is coming or you could send me document if you have.
Thanks in advance.
Harish

Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA

Hi
I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
After, during the import in the target system I get the following error message:
vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66 finish processing of package SAP0000
You can see below the detail of the 5 packages in error:
SAPAPPL0_1_5
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
SAPZPSA
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
SAPDODS
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB
SAPDFACT
DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
(DB) ERROR: DDL statement failed
( ALTER TABLE "/BI0/F0TCT_C01"    ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131 )    TABLESPACE "" )
DbSlExecute: rc = 99
(SQL error 1741)
error message returned by DbSl:
ORA-01741: illegal zero-length identifier
(DB) INFO: disconnected from DB
SAPZOSO
DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
(DB) ERROR: DDL statement failed
(CREATE TABLE "/BIC/B0000989000"    ("REQUEST" VARCHAR2 (000090)      DEFAULT ' ' NOT NULL,    "DATAPAKID" VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "PART
NO" NUMBER (000010)      DEFAULT 0 NOT NULL,    "RECORD" NUMBER (000010)      DEFAULT 0 NOT NULL,    "PLANT" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "MATERIA
L" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "RPA_CURUOM" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RPA_MVF" NUMBER (000017, 000002)      DEFAULT 0 NOT N
ULL,    "PRICE_UNIT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RPA_QTYUOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_SSMFGR" VARCHAR2 (000024)
    DEFAULT '00000000' NOT NULL,    "BASE_UOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "FRE_PLNPUR" VARCHAR2 (000036)      DEFAULT ' ' NOT NULL,    "FRE_MINS
TK" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SERLEV" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SELCLS" VARCHAR2 (000003)      DEFAULT '
0' NOT NULL,    "FRE_REPLST" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "ABCKEY" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RECORDMODE" VARCHAR2 (000003)
    DEFAULT ' ' NOT NULL,    "RT_SERVLEV" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RT_SUPS" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "VAL_TYPE" VARCH
AR2 (000030)      DEFAULT ' ' NOT NULL,    "PUR_GROUP" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VPNEU" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,
"CURRENCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VRKPE" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "DISMM" VARCHAR2 (000006)      DEFAULT ' '
NOT NULL,    "SALES_UNIT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VP_BT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_BT" NUMBER (000017,
000003)      DEFAULT 0 NOT NULL,    "RT_VP_NT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_NT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "R
T_VWAERBT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VWAERNT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VPMEIBT" VARCHAR2 (000009)      DEFAULT '
' NOT NULL,    "RT_VPMEINT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "LOC_CURRCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "UNIT" VARCHAR2 (000009)
DEFAULT ' ' NOT NULL,    "CM_MCATDIV" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT1" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT2" VARCHAR2
(000054)      DEFAULT ' ' NOT NULL,    "CM_CDT3" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT4" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_HIEID"
VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "CPSTLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "CPSVLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL
,    "STOCK_VAL" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "STOCK_QTY" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RT_SEASON" VARCHAR2 (000012)
DEFAULT ' ' NOT NULL,    "RT_SEASYR" VARCHAR2 (000012)      DEFAULT '0000' NOT NULL,    "CALDAY" VARCHAR2 (000024)      DEFAULT '00000000' NOT NULL,    "CALWEEK"
VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "RF_BNDID" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "/BIC/ZCATTR3" VARCHAR2 (000006)      DEFAULT ' ' NOT
NULL,    "/BIC/ZCSTYLE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCIMAGE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCBRNDTYP" VARCHAR2 (000
003)      DEFAULT ' ' NOT NULL,    "/BIC/ZCGROUPE" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL)    PCTFREE 10    PCTUSED 00    INITRANS 001    TABLESPACE    STORAGE (
INITIAL    0000000016 K            NEXT        0000001024 K            MINEXTENTS 0000000001            MAXEXTENTS 2147483645            PCTINCREASE 0000
    FREELISTS 001            FREELIST GROUPS 01)      PARTITION BY RANGE ("PARTNO")      (      PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN      (00000
00002)      NOCOMPRESS      ) )
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB

hello,
Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
let me know how it goes.
Regards,
Michael

Homogeneous system copy ECC 6.0 EHP4 dual stack system

Hello ,
I have a requirement of homogeneous system for the below Source system
Source system :
ECC6.0 EHP1 ABAP+java dual stack system with DB2 AIX
Required Target system:
ECC 6.0 EHP1 (same as target system except single stack java not required)
1 .I was trying to use db specific homogeneous system copy method wiht redirected restore script
2. Not possible to get downtime on source system hense it's a production system , then i used target system installaion with homogeneous system copy database specific mehthod
Problem is - it's asking migration export while creating the target system , but i don't have any migration export since i have not exported from source system .
please help us to proceed further.
Thanks in Advance.

2. Not possible to get downtime on source system hense it's a production system , then i used target system installaion with homogeneous system copy database specific mehthod
What did you choose to do in database specific method - DB2 backup/restore ?
//Backup Restore
Homegeneous system copy(database specific method)
Target -
As I understand, you have started IMPORT using SAPinst for target system installation. During IMPORT, what target system installation (only ABAP or what ?) you chose ?
//I took ABAP+JAVA
'Problem is - it's asking migration export while creating the target system , but i don't have any migration export since i have not exported from source system .'
This is because the source system is ABAP+Java, and now during target system installation, then IMPORT procedure is asking for Java Export dump.
Thanks

Solman 7.1 dual stack homogenous System copy

Hi all,
I need to perform a solman 7.1 dual stack system copy from QA to sandbox system.
Can anybody let me know the steps involved in solman 7.1 dual stack system copy Procedure.
Thanks
Vimal

Hi Vimal,
Please check:
"System Copy for SAP Systems Based on SAP NetWeaver 7.1 Including Enhancement Package 1 Java (PI/XI)
SAP NetWeaver Process Integration 7.1 including Enhancement Package 1 - 2010/12/02" or 011000358700001317792010E.pdf
The best way to perform a system copy of a dual stack is to use sapinst with the backup/restore options. Install a plaine system an restore the db would not work. Sapinst exports also a lot of stuff from the filesystem repository.
1. Export actual SAP system using sapinst with option export ABAP+JAVA
2. Uninstall SAP+DB from actual server
3. Install SAP using option System Copy (Target system)
Thanks
Vikram

Link for JAVA homogenous system copy for oracle

hi
I am unable to find the document for JAVA homogenous system copy for Oracle for NW04 & NW04s
kindly find me the link
thx
regards
Shoeb

Hi
Here you go...-
[JAVA Sytem Copy for ORACLE |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cd76e07d-0c01-0010-298d-f699863f2ce4]
Regards
Jhony

Needs link for JAVA homogenous system copy NW04 & NW04s

hi
I am unable to find the document for JAVA homogenous system copy for NW04 and NW04s.
kindly plz provide the link for it
its urgent
thanks
regards
Shoeb

Hi,
try [http://service.sap.com|http://service.sap.com] -> Relase & Upgrade-Info -> Installation and Upgrade ...-> SAP NetWeaver -> SAP NetWeaver 7.0 -> Installation -> Installation - SAP NetWeaver Systems
Kind Regards
David Heidbrink

Homogeneous system copy using export/import on WIn/Ora

Dear experts,
i need to know the homogeneous system copy procedure using export/import method for following scenario as we are in the process of Data center migration of SAP systemsfrom location to another location.
Source system:
ECC6/BI7/APO(ABAP stack)
OS:WIndows 2003
D:B:Oracle 10g
Target System: New hardware installed on Virtual environment(VMware)
No change of SID
ECC6/BI//APO
OS:WINDOWS2008
D:B: Oracle 11g
It would be great if anyone can share the documentu2019s/links (Not SAP homogeneous system copy guide) which you have prepared for the homog. system copy using export/import on Windows/oracle as i have done the system copy using backup/restore for ABAP stack and export/import for Java stack so far.
Therefore i am not sure about this procedure/prerequisites/checklist needs to prepare as i have gone through the SAP guide but it is not step by step document.
Cheers

There are two approacahes for your project
1) First wether to use Oracle11g on target database
2) Continue with Database Oracle 10.2 on traget database
If you want to use Oracle11.2 on your target database you have to search the installers which are supported for 11.2 database. If the installers are available then only you can install your target database using Oracle11.2.Other wise t use Oracle10.2.0.4 is supported on Win2008r2. You can use this version of Oracle database to build ur target database.It works fine . Absolutely no problem.
Later on you can upgrade the Oracle10.2 to 11.2 Onwards.
If installers are avialble you can use Oracle11.2 also. There is absolutely no problem.
As per my knowledge installers are available and supported with Oracle11.2.Also check the PAM before arriving on any deciscion.

Homogeneous System copy of ABAP+JAVA stack ( PI )

Similar Messages

Maybe you are looking for