Homogeneous System Copy process: PRD to QAS on MSSQL
We have a need to refresh our QAS system with a copy of PRD - the method I have been researching is a homogeneous database copy. I am having difficulty finding step-by-step documentation to carry this out for release R/3 4.6C.
The only client refreshes I have performed are through SCC9 or SCCL and the R/3 installation was done by a consultants - hence the need for good step-by-step documentation!
I should also note that our QAS system shares the same physical server as the DEV system.
Any assistance is greatly appreciated.
> I am assuming that I would be restoring the PRD database over the QAS database - this is where I am looking for additional documentation.
Use
http://service.sap.com/systemcopy
all necessary steps (+ the mentioned notes) are described there.
Markus
Similar Messages
-
System copy from PRD to QAS based ABAP system EHP4.
Hi guys,
I have to perform homogenous system copy from PRD to QAS.
My PRD is ECC6.0 EHP4 release 701 sp 103( SAP_basis) with oracle ver 10.2.0.4.0.
Is there any specific procedure for EHP4 or i can follow the below mentioned guide.
https://websmp204.sap-ag.de/~sapidb/011000358700000514722009E.pdf.
What pre-requisite i need to take care before doing the system copy?
Regards
AbhishekHi,
All pre-requisite is there in system copy guide.Apart from that take user master backup of quality system and after system copy, import the user master data back so that you have same users in quality system.
Also, take RFC's backup also.
Thanks
Sunny -
Logical system on QAS after remote client copy from PRD to QAS
I wander after remote client copy from PRD to QAS do I have to change Logical system on QAS. Do I have to run some postprocessing program?
Thank you in advanceHi Branko,
After the system copy, go to transaction SALE -> Sending and receiving Systems -> Logical systems -> Define Logical System , click New Entries and create a new logical system for your QAS; then go to SALE -> Sending and receiving Systems -> Logical systems -> Assign Client to Logical System, click on the client, click change and assign the new Logical system.
Other activities, check Jobs, RFC's, etc...
Regards
Juan
Please reward with points if helpful -
When creating system copy of PRD sistem to QAS system how to create transpo
when creating system copy of PRD sistem to QAS system how to create transport request queue on QAS with:
everything transported to QAS previously but
not transported to PRD.
We have an approval procedure with delete form queue on QAS after import.
Basically all tr.req from import queue(there I do not have delete from import queue) should be entered in same sequence to QAS.
I know how to add technically one transport request to queue but how to do that for many(all)Jan
Check the import history of both QAS and PRD from a date which is just after your previous system copy.
Use the V-lookup function of MS Excel. You can determine those request which were there in QAS but have not been moved to PRD yet.
Now, if you want to add multiple request in the import queue , I would recommend to do it from OS level but writing a script.
You will find multiple threads in SDN for how to add request in import queue from OS level. Below one might be helpful
Link: [Re: need TP command for Add Transport Request to import Queue all at a time;
Regards
Anindya
Edited by: Anindya Bose on Feb 22, 2010 10:02 AM -
Authority issues after homogeneous system copy - as/400 v5r1 - R/3 4.6C
Hello,
I am trying to complete a homogeneous system copy of an R/3 system.
The source system is PRD - the target system is TST. The hardware platforms are different (both iSeries) but the kernel/pdf/OS patch levels are all identical.
The process I have follow so far is this:
1. Preprocessing of the R3PRDDATA library.
2. SAVLIB of R3PRDDATA.
3. Delete old R3TSTDATA lib on target system using QSECOFR
4. Create new R3TSTDATA using SQLUTIL as TSTOFR (TSTOFR is my user for the target system)
5. CHGOBJOWN OBJ(R3TSTDATA) OBJTYPE(*LIB) NEWOWN(TSTOFR)
6. GRTOBJAUT OBJ(R3TSTDATA) OBJTYPE(LIB) USER(SAP02) AUT(CHANGE)
7. Detach existing Journal, create new journal receiver, create new journal ...
DLTJRN JRN(R3TSTDATA/QSQJRN)
DLTJRNRCV JRNRCV(R3TSTJRN/QSQJRN0001)
CRTJRNRCV JRNRCV(R3TSTJRN/QSQJRN0001) THRESHOLD(500000)
CHGOBJOWN OBJ(R3TSTJRN/QSQJRN0001) OBJTYPE(*JRNRCV) NEWOWN(R3OWNER)
CRTJRN JRN(R3TSTDATA/QSQJRN) JRNRCV(R3TSTJRN/QSQJRN0001) MNGRCV(SYSTEM) DLTRCV(NO)
CHGOBJOWN OBJ(R3TSTDATA/QSQJRN) OBJTYPE(*JRN) NEWOWN(R3OWNER)
8. RSTLIB from tape.
9. AS4FIXFILE on R3TSTDATA with
DBLIB R3TSTDATA
CHGOWN *NO
ENDJRN *YES
STRJRN *YES
CHGFILE *NO
10. install license key
So from this point the system will start without a problem. However whenever I try and write something to the database I get this type of error (via SM21 or ABAP dump) message:
Database error -551 at SEL access to table BTCOPTIONS
Not authorized to object BTCOPTIONS in R3TSTDATA type *file
Job=378721/TST02/WP02
Database error text........: "Not authorized to object SCPRACTR in R3TSTDATA
type *FILE. Job=379089/TST02/WP00"
I have also run GRTOBJAUT for the - TST02 user on the R3TSTDATA lib but still the same problem.
I'm certain the issue is related to the user on the 400 that is actually used by the work processes, and that user does not have the relevant rights to R3TSTDATA.
Any suggestions on how to resolve this problem will be humbly received.
Many thanks, ColinHi,
step 9 is wrong ;-(((
old:
9. AS4FIXFILE on R3TSTDATA with
DBLIB R3TSTDATA
CHGOWN *NO
ENDJRN *YES
STRJRN *YES
CHGFILE *NO
correct:
9. AS4FIXFILE on R3TSTDATA with
DBLIB R3TSTDATA
CHGOWN *YES <<<<<
ENDJRN *YES
STRJRN *YES
CHGFILE *NO
it NEEDS to run with QSECOFR !!!
=> it will work !
GRTOBJAUT on all objects is rubbish only !!! no real solution!!!
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de -
Homogeneous System Copy - Help me
Hi,
I need to refresh the Training environment with the QAS environment data then I did the client copy from QRP(QAS environment) to TRN (training environment). This copy was made successfully, but with some data inconsistences.
And then a decided to do a Homogeneous System Copy.
I did the HSC selecting the option "Standard System Copy/Migration (R3Load-Based) " but exist the another option "System Copy / Oracle Backup/Restore".
And my doubt is: the process that I need to do is the Standard System Copy / Migration (R3Load-Based) or System Copy / Oracle Backup/Restore?
And the inverse process (import), can I to install just a Database Instance, once that a Central Instance already exists?!
Thanks and Regards,
Dany AndersonHii the process you need to do is system copy . In system copy there are two ways one by using R3load tool and other is backup method. Generally the backup method is faster where all your database will be backedup and copied to the target system. R3load and oracle backup are just two methods of doing system copy.
homogeneous system copy if your target system is on the same operating system and database system as your source system. The database contents are copied from the source system to the target system.
You perform a heterogeneous system copy if you want to change the operating system or database system. Migration is another term for a heterogeneous system copy.
Please reward points if useful -
Homogenous System Copy WAS 6.20 DB2 8
Hi all.
I am planning to do a Homogenous system copy of our PRD system to the QAS system. Both have SAP R3 4.70 Core with WebAS 620 and DB2 version 8.
I am reading both guides 6.20 and 6.30 and it is not clear if with WebAs 620 and version 8 if I can use the database relocation method or the backup method. It says that u need DB2 8 but not sure if 620 o 630. Could someone clear this doubt.
I know that the R3Load method is possible but if the backup method or the relocation method is possible I would like to use this since this backups the whole DB and the r3load doesn't.Here is the link to the thread
Homogenous System Copy WAS 6.20 DB2 8
Bye. -
Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA
Hi
I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
After, during the import in the target system I get the following error message:
vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66 finish processing of package SAP0000
You can see below the detail of the 5 packages in error:
SAPAPPL0_1_5
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
SAPZPSA
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
SAPDODS
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB
SAPDFACT
DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
(DB) ERROR: DDL statement failed
( ALTER TABLE "/BI0/F0TCT_C01" ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131 ) TABLESPACE "" )
DbSlExecute: rc = 99
(SQL error 1741)
error message returned by DbSl:
ORA-01741: illegal zero-length identifier
(DB) INFO: disconnected from DB
SAPZOSO
DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
(DB) ERROR: DDL statement failed
(CREATE TABLE "/BIC/B0000989000" ("REQUEST" VARCHAR2 (000090) DEFAULT ' ' NOT NULL, "DATAPAKID" VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "PART
NO" NUMBER (000010) DEFAULT 0 NOT NULL, "RECORD" NUMBER (000010) DEFAULT 0 NOT NULL, "PLANT" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "MATERIA
L" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "RPA_CURUOM" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RPA_MVF" NUMBER (000017, 000002) DEFAULT 0 NOT N
ULL, "PRICE_UNIT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RPA_QTYUOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_SSMFGR" VARCHAR2 (000024)
DEFAULT '00000000' NOT NULL, "BASE_UOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "FRE_PLNPUR" VARCHAR2 (000036) DEFAULT ' ' NOT NULL, "FRE_MINS
TK" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SERLEV" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SELCLS" VARCHAR2 (000003) DEFAULT '
0' NOT NULL, "FRE_REPLST" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "ABCKEY" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RECORDMODE" VARCHAR2 (000003)
DEFAULT ' ' NOT NULL, "RT_SERVLEV" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RT_SUPS" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "VAL_TYPE" VARCH
AR2 (000030) DEFAULT ' ' NOT NULL, "PUR_GROUP" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VPNEU" NUMBER (000017, 000002) DEFAULT 0 NOT NULL,
"CURRENCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VRKPE" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "DISMM" VARCHAR2 (000006) DEFAULT ' '
NOT NULL, "SALES_UNIT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VP_BT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_BT" NUMBER (000017,
000003) DEFAULT 0 NOT NULL, "RT_VP_NT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_NT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "R
T_VWAERBT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VWAERNT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VPMEIBT" VARCHAR2 (000009) DEFAULT '
' NOT NULL, "RT_VPMEINT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "LOC_CURRCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "UNIT" VARCHAR2 (000009)
DEFAULT ' ' NOT NULL, "CM_MCATDIV" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT1" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT2" VARCHAR2
(000054) DEFAULT ' ' NOT NULL, "CM_CDT3" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT4" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_HIEID"
VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "CPSTLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "CPSVLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL
, "STOCK_VAL" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "STOCK_QTY" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RT_SEASON" VARCHAR2 (000012)
DEFAULT ' ' NOT NULL, "RT_SEASYR" VARCHAR2 (000012) DEFAULT '0000' NOT NULL, "CALDAY" VARCHAR2 (000024) DEFAULT '00000000' NOT NULL, "CALWEEK"
VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "RF_BNDID" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "/BIC/ZCATTR3" VARCHAR2 (000006) DEFAULT ' ' NOT
NULL, "/BIC/ZCSTYLE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCIMAGE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCBRNDTYP" VARCHAR2 (000
003) DEFAULT ' ' NOT NULL, "/BIC/ZCGROUPE" VARCHAR2 (000054) DEFAULT ' ' NOT NULL) PCTFREE 10 PCTUSED 00 INITRANS 001 TABLESPACE STORAGE (
INITIAL 0000000016 K NEXT 0000001024 K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0000
FREELISTS 001 FREELIST GROUPS 01) PARTITION BY RANGE ("PARTNO") ( PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN (00000
00002) NOCOMPRESS ) )
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DBhello,
Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
let me know how it goes.
Regards,
Michael -
Error during Homogenous System copy of ABAP+JAVA stack
Hi All,
I'm trying to do a homogeneous system copy of an XI system NW04s on Windows 2k3 and Oracle database to another windows 2k3 machine. SCS and Database went on fine but during CI installation on the target system I'm stuck at "Run ABAP Reports" phase.
I'm getting an error:
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
runRADDBDIF was executed with status ERROR
The ABAP stack is however up and when I login to 000 client using DDIC user and try to execute the report RADDBDIF, I get a runtime error RAISE_EXCEPTION with Exception condition "WRITE_FAILED" raised.
A RAISE statement in the program "SAPLSUGI" raised the exception condition "WRITE_FAILED".
If anyone has encountered similar problem, kindly help me.
Regards,
SameerHi Juan,
I've already checked dev_disp and dev_ms but didn't find any errors. However, I got some errors in dev_w0. I'm pasting the same for your reference.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Jan 07 18:45:15 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 04
M sid COP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2148
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2148) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Jan 07 18:45:16 2008
M DpShMCreate: sizeof(wp_adm) 10056 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05EC0040, size: 4883696)
M DpShMCreate: allocated sys_adm at 05EC0040
M DpShMCreate: allocated wp_adm at 05EC2090
M DpShMCreate: allocated tm_adm_list at 05EC47D8
M DpShMCreate: allocated tm_adm at 05EC4808
M DpShMCreate: allocated wp_ca_adm at 062CDC48
M DpShMCreate: allocated appc_ca_adm at 062D3A08
M DpShMCreate: allocated comm_adm at 062D5948
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06356808
M DpShMCreate: allocated gw_adm at 06356848
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06356878
M DpShMCreate: allocated wall_adm at 06356880
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host hydhtc24738
M calling db_connect ...
C Prepending F:\usr\sap\COP\DVEBMGS04\exe to Path.
C
C Mon Jan 07 18:45:18 2008
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Attaching to DB Server COP (con_hdl=0,svchp=064A2338,srvhp=064B3F34)
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now '/@COP' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=064A2338,usrhp=064FFA98)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now 'SAPSR3/<pwd>@COP' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance COP is running on HYDHTC24738 with ORACLE version 10.2.0.1.0 since JAN 07, 2008, 15:34:24
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080107 184516 HYDHTC24738
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Jan 07 18:45:22 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0AB50040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AF90040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CEE0040, size: 615040)
M SHM_PAGING_ADM (addr: 0CF80040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0D010040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0D0A0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 7, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10CD00C8, size: 30000000, end: 1296C448)
B dbtbxbuf: Buffer TABLP (addr: 129700C8, size: 10240000, end: 133340C8)
B dbexpbuf: Buffer EIBUF (addr: 133400D0, size: 4194304, end: 137400D0)
B dbexpbuf: Buffer ESM (addr: 137500D0, size: 4194304, end: 13B500D0)
B dbexpbuf: Buffer CUA (addr: 13B600D0, size: 3072000, end: 13E4E0D0)
B dbexpbuf: Buffer OTR (addr: 13E500D0, size: 4194304, end: 142500D0)
M
M Mon Jan 07 18:45:23 2008
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Mon Jan 07 18:45:26 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1965E820
S
S Mon Jan 07 18:45:27 2008
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D8C00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D8C02B0
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2236 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 4888kb, dir_size: 4856kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
A >> Shm MMADM area (addr=57E91D98 leng=126176 end=57EB0A78)
A >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
A RFC Destination> destination hydhtc24738_COP_04 host hydhtc24738 system COP systnr 4 (hydhtc24738_COP_04)
A RFC Options> H=hydhtc24738,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 7406 bytes at 0FFB0040
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\COP\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\COP\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Mon Jan 07 18:45:28 2008
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.111.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [14]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume hydhtc24738_COP_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >hydhtc24738_COP_04 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 07.01.2008 18:45:27 1199711727 / 1692
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <hydhtc24738_COP_04 >
L BtcSysStartRaise: End
S
S Mon Jan 07 18:45:36 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05E90040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05E907A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05E907E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05E907EC
S
S Mon Jan 07 18:45:44 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
B
B Mon Jan 07 18:47:27 2008
B dbmyclu : info : my major identification is 3244494858, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is DCBD22E36FC346F1BF890002E339BE1E.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
A
A Mon Jan 07 18:47:55 2008
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Mon Jan 07 18:48:02 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Mon Jan 07 18:48:03 2008
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Mon Jan 07 18:48:04 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Jan 07 18:48:04 2008
A
A ABAP Program SAPLSUGI .
A Source LSUGIU08 Line 77.
A Error Code RAISE_EXCEPTION.
A Module $Id: //bas/700_REL/src/krn/runt/abfunc.c#10 $ SAP.
A Function ab_jfune Line 2561.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Exception condition "WRITE_FAILED" raised..
A
S
S Mon Jan 07 18:53:35 2008
S found spool memory service RSPO-ACTIONS at 1D8C9978
B
B Mon Jan 07 20:31:35 2008
B table logging switched off for all clients
Regards,
Sameer -
How to configure a test sever with the system copy with prd data
Dear All ,
I need to configure a test sever with the system copy with prd data.
Please any one can suggest the step by step process to do the same configure and system copy.
Regards
kumarDear All,
I am facing problem in system copy. I want to knoe the way after restore i can move all the data and server data in one drive .
Now the error is resolve by changing the initTAT.sap the value tape to disk but now stuck in the drive for restore it is asking which is not there at os level.
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD33' at location
BrDirCreate-1
BR0253E errno 2: No such file or directory
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD32' at location
TO solve the above problem i have created ad network drive for this but once all the restore will be completed than how i can i move the data form network drive to on drvie.
Please suggest
Regards,
Kumar
Edited by: kumarmoh on Jul 21, 2009 1:43 PM -
Homogeneous System Copy on Windows/Oracle.
Hi!
I have to start a project on Homogeneous System Copy on Windows/Oracle.
I have gone through the System Copy documents by SAP and also verious SAP note (spl. 659509 ). But still I am not really clear about the whole process.
As per my understanding, as follows :
1. Export the Database from Source Host. <b>But HOW? Wheather I have to use any System Tool from SAP ? </b>
<b>Copy that to Target Host.</b>
2. <b>Install the CI in Target Host. As I am working on SAP 4.7 1.10 (SR1) with Kernel 6.20 (NU).</b>
3. At the time of installation of DI in Target Host give the path of Exoprt fileset.
My question :
<b>1. Wheather my plan is right or needs change?</b>
2. What type of copy it will be :
a) Homogeneous System Copy using Online / Offline Database Backup.
b) Homogeneous System Copy using R3LOAD Procedure.
c) Homogeneous System Copy using R3COPY Procedure.
<b>3. Do I really need to download/order any system copy tool from SAP?</b>
My Source :
SAP 4.7 on Windows 2000 with Oracle 8.1.7 with noarchivelog mode.
Terget :
SAP 4.7 on Windows 2003 with Oracle9.2.0.8
All Kernel : 620 (NU)
Looking for an urgent solution.
With Kind Regards,
Pratip BhattacharyyaHi! Umesh,
I have found 2 errore .
1) ORA-01652: unable to extend temp segment by 2560 in tablespace PSAPTEMP
2) DbSl Trace: ORA-1403 when accessing table SAPUSER
Two things I want to mention here.
1. I donot know the passwd of datadase users of Source . I have used different passwd for Target DB userd.
2. Used defferent SAP SID. Source : ID4 and Target : IDN
Is that cause any harm?
Here is the detail logs of those two files.
<b><i>SAPSSEXC.log</i></b>
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222010532
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -ctf I G:\Export/DATA/SAPSSEXC.STR C:\SAPinst ORACLE SAPINST_di/DDLORA.TPL C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.TSK ORA -l C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.log
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222010532
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222010539
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.cmd -l C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\idn\928 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPIDN's password
DbSl Trace: Connecting as /@IDN on connection 0 ...
DbSl Trace: Attaching to DB Server IDN (con_hdl=0,svchp=0146C57C,svrhp=0146E82C)
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPIDN/<pwd>@IDN on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance idn is running on DLWSDV10 with ORACLE version 9.2.0.8.0 since 20061222
Fri Dec 22 01:05:39 2006
***LOG BZA=> table SVERS does not exist on database [dblink#1 @ 1292] [dblink 1292 ]
(DB) INFO: connected to DB
(GSI) INFO: dbname = "IDN20061222121231 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "DLWSDV10 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "DLWSDV10"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) INFO: BCACT created
(IMP) INFO: import of BCACT completed (0 rows)
(DB) INFO: BCACT~0 created
(DB) INFO: BCCOM created
(IMP) INFO: import of BCCOM completed (0 rows)
(DB) INFO: BCCOM~0 created
(DB) INFO: BCEXC created
(IMP) INFO: import of BCEXC completed (0 rows)
(DB) INFO: BCEXC~0 created
(DB) INFO: BCRES created
(IMP) INFO: import of BCRES completed (0 rows)
(DB) INFO: BCRES~0 created
(DB) INFO: BCSPO created
(IMP) INFO: import of BCSPO completed (0 rows)
(DB) INFO: BCSPO~0 created
(DB) INFO: BCTOU created
(IMP) INFO: import of BCTOU completed (0 rows)
(DB) INFO: BCTOU~0 created
(DB) INFO: BRATEXT created
(IMP) INFO: import of BRATEXT completed (914265 rows)
(DB) INFO: BRATEXT~0 created
(DB) INFO: BTCSED created
(IMP) INFO: import of BTCSED completed (623 rows)
(DB) INFO: BTCSED~0 created
(DB) INFO: CD0T000 created
(IMP) INFO: import of CD0T000 completed (0 rows)
(DB) INFO: CD0T000~0 created
(DB) INFO: CD0T120TAB created
(IMP) INFO: import of CD0T120TAB completed (0 rows)
(DB) INFO: CD0T120TAB~0 created
(DB) INFO: CD0T130TAB created
(IMP) INFO: import of CD0T130TAB completed (0 rows)
(DB) INFO: CD0T130TAB~0 created
(DB) INFO: CD0T140TAB created
(IMP) INFO: import of CD0T140TAB completed (0 rows)
(DB) INFO: CD0T140TAB~0 created
(DB) INFO: CD0T500TAB created
(IMP) INFO: import of CD0T500TAB completed (0 rows)
(DB) INFO: CD0T500TAB~0 created
(DB) INFO: CD2APP0 created
(IMP) INFO: import of CD2APP0 completed (0 rows)
(DB) INFO: CD2APP0~0 created
(DB) INFO: CD2HV1PTAB created
(IMP) INFO: import of CD2HV1PTAB completed (0 rows)
(DB) INFO: CD2HV1PTAB~0 created
(DB) INFO: CD2HV2FTAB created
(IMP) INFO: import of CD2HV2FTAB completed (0 rows)
(DB) INFO: CD2HV2FTAB~0 created
(DB) INFO: CNTLWARN created
(IMP) INFO: import of CNTLWARN completed (0 rows)
(DB) INFO: CNTLWARN~0 created
(DB) INFO: D010INC created
(IMP) INFO: import of D010INC completed (3599971 rows)
(DB) INFO: D010INC~0 created
(DB) INFO: D010INC~1 created
(DB) INFO: D010TAB created
(IMP) INFO: import of D010TAB completed (11017270 rows)
DbSl Trace: ORA-1652 occured when executing SQL statement (parse error offset = 35)
DbSl Trace: sc_p=013ED590,no=20,idc_p=00000000,con=0,act=0,slen=187,smax=256,#vars=0,stmt=01E1A0C8,table=
DbSl Trace: CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (\
DbSl Trace: INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) ;
<b>(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1652)
error message returned by DbSl:
ORA-01652: unable to extend temp segment by 2560 in tablespace PSAPTEMP
DbSl Trace: Disconnecting from connection 0 ...</b>
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=0146C57C,srvhp=0146E82C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222011210
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222023556
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.cmd -l C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\idn\928 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPIDN's password
DbSl Trace: Connecting as /@IDN on connection 0 ...
DbSl Trace: Attaching to DB Server IDN (con_hdl=0,svchp=0146C57C,svrhp=0146E82C)
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPIDN/<pwd>@IDN on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance idn is running on DLWSDV10 with ORACLE version 9.2.0.8.0 since 20061222
(DB) INFO: connected to DB
(GSI) INFO: dbname = "IDN20061222121231 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "DLWSDV10 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "DLWSDV10"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) ERROR: DDL statement failed
(DROP INDEX "D010TAB~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-1652 occured when executing SQL statement (parse error offset = 35)
DbSl Trace: sc_p=013ECFEC,no=1,idc_p=00000000,con=0,act=0,slen=187,smax=256,#vars=0,stmt=01E06DA8,table=
DbSl Trace: CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (\
DbSl Trace: INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) ;
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1652)
error message returned by DbSl:
ORA-01652: unable to extend temp segment by 2560 in tablespace PSAPTEMP
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=0146C57C,srvhp=0146E82C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222023612
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222031914
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.cmd -l C:\SAPinst ORACLE SAPINST_di/SAPSSEXC.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\idn\928 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPIDN's password
DbSl Trace: Connecting as /@IDN on connection 0 ...
DbSl Trace: Attaching to DB Server IDN (con_hdl=0,svchp=0146C57C,svrhp=0146E82C)
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPIDN/<pwd>@IDN on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance idn is running on DLWSDV10 with ORACLE version 9.2.0.8.0 since 20061222
(DB) INFO: connected to DB
(GSI) INFO: dbname = "IDN20061222121231 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "DLWSDV10 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "DLWSDV10"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) ERROR: DDL statement failed
(DROP INDEX "D010TAB~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-1652 occured when executing SQL statement (parse error offset = 35)
DbSl Trace: sc_p=013ECFEC,no=1,idc_p=00000000,con=0,act=0,slen=187,smax=256,#vars=0,stmt=01E06DA8,table=
DbSl Trace: CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (\
DbSl Trace: INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) ;
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPIDN620 STORAGE (INITIAL 0 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1652)
error message returned by DbSl:
ORA-01652: unable to extend temp segment by 2560 in tablespace PSAPTEMP
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=0146C57C,srvhp=0146E82C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222031938
<b><u>SAPAPPL0.log</u></b>
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222010528
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -ctf I G:\Export/DATA/SAPAPPL0.STR C:\SAPinst ORACLE SAPINST_di/DDLORA.TPL C:\SAPinst ORACLE SAPINST_di/SAPAPPL0.TSK ORA -l C:\SAPinst ORACLE SAPINST_di/SAPAPPL0.log
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: END OF LOG: 20061222010530
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: START OF LOG: 20061222010539
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\IDN\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\IDN\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE SAPINST_di/SAPAPPL0.cmd -l C:\SAPinst ORACLE SAPINST_di/SAPAPPL0.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\idn\928 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPIDN's password
DbSl Trace: Connecting as /@IDN on connection 0 ...
DbSl Trace: Attaching to DB Server IDN (con_hdl=0,svchp=0146C57C,svrhp=0146E82C)
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0146C57C,usrhp=01477414)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPIDN/<pwd>@IDN on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0146C57C,srvhp=0146E82C,usrhp=01477414)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance idn is running on DLWSDV10 with ORACLE version 9.2.0.8.0 since 20061222
Fri Dec 22 01:05:39 2006
***LOG BZA=> table SVERS does not exist on database [dblink#1 @ 1292] [dblink 1292 ]
(DB) INFO: connected to DB
(GSI) INFO: dbname = "IDN20061222121231 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "DLWSDV10 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "DLWSDV10"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) INFO: /1SAP1/FC_TFG200 created
(IMP) INFO: import of /1SAP1/FC_TFG200 completed (3 rows)
(DB) INFO: /1SAP1/FC_TFG200~0 created
(DB) INFO: /1SAP1/FC_TFG201 created
(IMP) INFO: import of /1SAP1/FC_TFG201 completed (2 rows)
(DB) INFO: /1SAP1/FC_TFG201~0 created
(DB) INFO: /1SAP1/FC_TFG300 created
(IMP) INFO: import of /1SAP1/FC_TFG300 completed (3 rows)
(DB) INFO: /1SAP1/FC_TFG300~0 created
(DB) INFO: /1SAP1/FC_TFG301 created
(IMP) INFO: import of /1SAP1/FC_TFG301 completed (4 rows)
(DB) INFO: /1SAP1/FC_TFG301~0 created
(DB) INFO: /SAPDMC/LSCDOCU created
(IMP) INFO: import of /SAPDMC/LSCDOCU completed (25 rows)
(DB) INFO: /SAPDMC/LSCDOCU~0 created
(DB) INFO: /SAPDMC/LSCDOCUT created
(IMP) INFO: import of /SAPDMC/LSCDOCUT completed (200 rows)
(DB) INFO: /SAPDMC/LSCDOCUT~0 created
(DB) INFO: /SAPDMC/LSCRULE created
(IMP) INFO: import of /SAPDMC/LSCRULE completed (15 rows)
(DB) INFO: /SAPDMC/LSCRULE~0 created
(DB) INFO: /SAPDMC/LSCRULET created
(IMP) INFO: import of /SAPDMC/LSCRULET completed (119 rows)
(DB) INFO: /SAPDMC/LSCRULET~0 created
(DB) INFO: /SAPDMC/LSCSTEPS created
(IMP) INFO: import of /SAPDMC/LSCSTEPS completed (62 rows)
(DB) INFO: /SAPDMC/LSCSTEPS~0 created
(DB) INFO: /SAPDMC/LSCSTEPT created
(IMP) INFO: import of /SAPDMC/LSCSTEPT completed (495 rows)
(DB) INFO: /SAPDMC/LSCSTEPT~0 created
(DB) INFO: /SAPDMC/LSCVERSN created
(IMP) INFO: import of /SAPDMC/LSCVERSN completed (19 rows)
(DB) INFO: /SAPDMC/LSCVERSN~0 created
(DB) INFO: /SAPDMC/LSGBDCA created
(IMP) INFO: import of /SAPDMC/LSGBDCA completed (74 rows)
(DB) INFO: /SAPDMC/LSGBDCA~0 created
(DB) INFO: /SAPDMC/LSGBDCS created
(IMP) INFO: import of /SAPDMC/LSGBDCS completed (74 rows)
(DB) INFO: /SAPDMC/LSGBDCS~0 created
(DB) INFO: /SAPDMC/LSGBDCT created
(IMP) INFO: import of /SAPDMC/LSGBDCT completed (74 rows)
(DB) INFO: /SAPDMC/LSGBDCT~0 created
(DB) INFO: /SAPDMC/LSGCUST created
(IMP) INFO: import of /SAPDMC/LSGCUST completed (0 rows)
(DB) INFO: /SAPDMC/LSGCUST~0 created
(DB) INFO: /SAPDMC/LSGSUB created
(IMP) INFO: import of /SAPDMC/LSGSUB completed (166 rows)
(DB) INFO: /SAPDMC/LSGSUB~0 created
(DB) INFO: /SAPDMC/LSGUSDFI created
(IMP) INFO: import of /SAPDMC/LSGUSDFI completed (16 rows)
(DB) INFO: /SAPDMC/LSGUSDFI~0 created
(DB) INFO: /SAPDMC/LSMCUST created
(IMP) INFO: import of /SAPDMC/LSMCUST completed (0 rows)
(DB) INFO: /SAPDMC/LSMCUST~0 created
(DB) INFO: /SAPDMC/LSOALG created
(IMP) INFO: import of /SAPDMC/LSOALG completed (1250 rows)
(DB) INFO: /SAPDMC/LSOALG~0 created
(DB) INFO: /SAPDMC/LSOATT created
(IMP) INFO: import of /SAPDMC/LSOATT completed (269 rows)
(DB) INFO: /SAPDMC/LSOATT~0 created
(DB) INFO: /SAPDMC/LSOLOG created
(IMP) INFO: import of /SAPDMC/LSOLOG completed (461 rows)
(DB) INFO: /SAPDMC/LSOLOG~0 created
(DB) INFO: /SAPDMC/LSOPAR created
(IMP) INFO: import of /SAPDMC/LSOPAR completed (1421 rows)
(DB) INFO: /SAPDMC/LSOPAR~0 created
(DB) INFO: /SAPDMC/LSOREC created
(IMP) INFO: import of /SAPDMC/LSOREC completed (56 rows)
(DB) INFO: /SAPDMC/LSOREC~0 created
(DB) INFO: /SAPDMC/LSOTXT created
(IMP) INFO: import of /SAPDMC/LSOTXT completed (455 rows)
(DB) INFO: /SAPDMC/LSOTXT~0 created
(DB) INFO: /SAPDMC/LSRATT created
(IMP) INFO: import of /SAPDMC/LSRATT completed (304 rows)
(DB) INFO: /SAPDMC/LSRATT~0 created
(DB) INFO: /SAPDMC/LSRTXT created
(IMP) INFO: import of /SAPDMC/LSRTXT completed (308 rows)
(DB) INFO: /SAPDMC/LSRTXT~0 created
(DB) INFO: /SAPDMC/LSUCUST created
(IMP) INFO: import of /SAPDMC/LSUCUST completed (22 rows)
(DB) INFO: /SAPDMC/LSUCUST~0 created
(DB) INFO: /SAPDMC/LSUMENU created
(IMP) INFO: import of /SAPDMC/LSUMENU completed (0 rows)
(DB) INFO: /SAPDMC/LSUMENU~0 created
(DB) INFO: /SAPDMC/LSUPROF created
(IMP) INFO: import of /SAPDMC/LSUPROF completed (19 rows)
(DB) INFO: /SAPDMC/LSUPROF~0 created
(DB) INFO: /SAPNEA/MR3_SODT created
(IMP) INFO: import of /SAPNEA/MR3_SODT completed (0 rows)
(DB) INFO: /SAPNEA/MR3_SODT~0 created
(DB) INFO: /SAPSLL/ECPPA created
(IMP) INFO: import of /SAPSLL/ECPPA completed (0 rows)
(DB) INFO: /SAPSLL/ECPPA~0 created
(DB) INFO: /SAPSMOSS/STAT created
(IMP) INFO: import of /SAPSMOSS/STAT completed (9 rows)
(DB) INFO: /SAPSMOSS/STAT~0 created
(DB) INFO: /SAPSMOSS/STATT created
(IMP) INFO: import of /SAPSMOSS/STATT completed (171 rows)
(DB) INFO: /SAPSMOSS/STATT~0 created
(DB) INFO: /SAPSMOSS/TURL created
(IMP) INFO: import of /SAPSMOSS/TURL completed (4 rows)
(DB) INFO: /SAPSMOSS/TURL~0 created
(DB) INFO: /SAPTRX/APARPRF created
(IMP) INFO: import of /SAPTRX/APARPRF completed (0 rows)
(DB) INFO: /SAPTRX/APARPRF~0 created
(DB) INFO: /SAPTRX/APARPRFT created
(IMP) INFO: import of /SAPTRX/APARPRFT completed (0 rows)
(DB) INFO: /SAPTRX/APARPRFT~0 created
(DB) INFO: /SAPTRX/ASFCTEV created
(IMP) INFO: import of /SAPTRX/ASFCTEV completed (40 rows)
(DB) INFO: /SAPTRX/ASFCTEV~0 created
(DB) INFO: /SAPTRX/ASFCTEVT created
(IMP) INFO: import of /SAPTRX/ASFCTEVT completed (88 rows)
(DB) INFO: /SAPTRX/ASFCTEVT~0 created
(DB) INFO: /SAPTRX/ASFCTPAR created
(IMP) INFO: import of /SAPTRX/ASFCTPAR completed (305 rows)
(DB) INFO: /SAPTRX/ASFCTPAR~0 created
(DB) INFO: /SAPTRX/ASFCTPAT created
(IMP) INFO: import of /SAPTRX/ASFCTPAT completed (671 rows)
(DB) INFO: /SAPTRX/ASFCTPAT~0 created
(DB) INFO: /SAPTRX/ASPARDC created
(IMP) INFO: import of /SAPTRX/ASPARDC completed (0 rows)
(DB) INFO: /SAPTRX/ASPARDC~0 created
(DB) INFO: /SAPTRX/ASPARDCT created
(IMP) INFO: import of /SAPTRX/ASPARDCT completed (0 rows)
(DB) INFO: /SAPTRX/ASPARDCT~0 created
(DB) INFO: /SAPTRX/SCSOMAP created
(IMP) INFO: import of /SAPTRX/SCSOMAP completed (0 rows)
(DB) INFO: /SAPTRX/SCSOMAP~0 created
(DB) INFO: /SAPTRX/SOLUTN created
(IMP) INFO: import of /SAPTRX/SOLUTN completed (0 rows)
(DB) INFO: /SAPTRX/SOLUTN~0 created
(DB) INFO: /SAPTRX/SOLUTNT created
(IMP) INFO: import of /SAPTRX/SOLUTNT completed (0 rows)
(DB) INFO: /SAPTRX/SOLUTNT~0 created
(DB) INFO: /SDF/STGLTRAN created
(IMP) INFO: import of /SDF/STGLTRAN completed (0 rows)
(DB) INFO: /SDF/STGLTRAN~0 created
(DB) INFO: /SOMO/INPUTTAB created
(IMP) INFO: import of /SOMO/INPUTTAB completed (12 rows)
(DB) INFO: /SOMO/INPUTTAB~0 created
(DB) INFO: A000 created
(IMP) INFO: import of A000 completed (0 rows)
(DB) INFO: A000~0 created
(DB) INFO: A002 created
(IMP) INFO: import of A002 completed (68 rows)
(DB) INFO: A002~0 created
(DB) INFO: A008 created
(IMP) INFO: import of A008 completed (0 rows)
(DB) INFO: A008~0 created
(DB) INFO: A011 created
(IMP) INFO: import of A011 completed (28 rows)
(DB) INFO: A011~0 created
(DB) INFO: A013 created
(IMP) INFO: import of A013 completed (68 rows)
(DB) INFO: A013~0 created
(DB) INFO: A014 created
(IMP) INFO: import of A014 completed (62 rows)
(DB) INFO: A014~0 created
(DB) INFO: A020 created
(IMP) INFO: import of A020 completed (2 rows)
(DB) INFO: A020~0 created
(DB) INFO: A027 created
(IMP) INFO: import of A027 completed (16 rows)
(DB) INFO: A027~0 created
(DB) INFO: A029 created
(IMP) INFO: import of A029 completed (0 rows)
(DB) INFO: A029~0 created
(DB) INFO: A031 created
(IMP) INFO: import of A031 completed (0 rows)
(DB) INFO: A031~0 created
(DB) INFO: A033 created
(IMP) INFO: import of A033 completed (8 rows)
(DB) INFO: A033~0 created
(DB) INFO: A034 created
(IMP) INFO: import of A034 completed (0 rows)
(DB) INFO: A034~0 created
(DB) INFO: A035 created
(IMP) INFO: import of A035 completed (56 rows)
(DB) INFO: A035~0 created
(DB) INFO: A036 created
(IMP) INFO: import of A036 completed (56 rows)
(DB) INFO: A036~0 created
(DB) INFO: A037 created
(IMP) INFO: import of A037 completed (56 rows)
(DB) INFO: A037~0 created
(DB) INFO: A038 created
(IMP) INFO: import of A038 completed (56 rows)
(DB) INFO: A038~0 created
(DB) INFO: A039 created
(IMP) INFO: import of A039 completed (56 rows)
(DB) INFO: A039~0 created
(DB) INFO: A040 created
(IMP) INFO: import of A040 completed (454 rows)
(DB) INFO: A040~0 created
(DB) INFO: A041 created
(IMP) INFO: import of A041 completed (0 rows)
(DB) INFO: A041~0 created
(DB) INFO: A042 created
(IMP) INFO: import of A042 completed (0 rows)
(DB) INFO: A042~0 created
(DB) INFO: A043 created
(IMP) INFO: import of A043 completed (0 rows)
(DB) INFO: A043~0 created
(DB) INFO: A048 created
(IMP) INFO: import of A048 completed (0 rows)
(DB) INFO: A048~0 created
(DB) INFO: A050 created
(IMP) INFO: import of A050 completed (2 rows)
(DB) INFO: A050~0 created
(DB) INFO: A057 created
(IMP) INFO: import of A057 completed (1364 rows)
(DB) INFO: A057~0 created
(DB) INFO: A066 created
(IMP) INFO: import of A066 completed (4 rows)
(DB) INFO: A066~0 created
(DB) INFO: A067 created
(IMP) INFO: import of A067 completed (1 rows)
(DB) INFO: A067~0 created
(DB) INFO: A068 created
(IMP) INFO: import of A068 completed (0 rows)
(DB) INFO: A068~0 created
(DB) INFO: A069 created
(IMP) INFO: import of A069 completed (0 rows)
(DB) INFO: A069~0 created
(DB) INFO: A070 created
(IMP) INFO: import of A070 completed (0 rows)
(DB) INFO: A070~0 created
(DB) INFO: A071 created
(IMP) INFO: import of A071 completed (70 rows)
(DB) INFO: A071~0 created
(DB) INFO: A072 created
(IMP) INFO: import of A072 completed (0 rows)
(DB) INFO: A072~0 created
(DB) INFO: A073 created
(IMP) INFO: import of A073 completed (159 rows)
(DB) INFO: A073~0 created
(DB) INFO: A074 created
(IMP) INFO: import of A074 completed (0 rows)
(DB) INFO: A074~0 created
(DB) INFO: A075 created
(IMP) INFO: import of A075 completed (0 rows)
(DB) INFO: A075~0 created
(DB) INFO: A076 created
(IMP) INFO: import of A076 completed (0 rows)
(DB) INFO: A076~0 created
(DB) INFO: A077 created
(IMP) INFO: import of A077 completed (0 rows)
(DB) INFO: A077~0 created
(DB) INFO: A078 created
(IMP) INFO: import of A078 completed (10 rows)
(DB) INFO: A078~0 created
(DB) INFO: A079 created
(IMP) INFO: import of A079 completed (84 rows)
(DB) INFO: A079~0 created
(DB) INFO: A080 created
(IMP) INFO: import of A080 completed (0 rows)
(DB) INFO: A080~0 created
(DB) INFO: A081 created
(IMP) INFO: import of A081 completed (1128 rows)
(DB) INFO: A081~0 created
(DB) INFO: A082 created
(IMP) INFO: import of A082 completed (0 rows)
(DB) INFO: A082~0 created
(DB) INFO: A083 created
(IMP) INFO: import of A083 completed (0 rows)
(DB) INFO: A083~0 created
(DB) INFO: A084 created
(IMP) INFO: import of A084 completed (0 rows)
(DB) INFO: A084~0 created
(DB) INFO: A085 created
(IMP) INFO: import of A085 completed (0 rows)
(DB) INFO: A085~0 created
(DB) INFO: A086 created
(IMP) INFO: import of A086 completed (0 rows)
(DB) INFO: A086~0 created
(DB) INFO: A087 created
(IMP) INFO: import of A087 completed (10 rows)
(DB) INFO: A087~0 created
(DB) INFO: A088 created
(IMP) INFO: import of A088 completed (0 rows)
(DB) INFO: A088~0 created
(DB) INFO: A089 created
(IMP) INFO: import of A089 completed (0 rows)
(DB) INFO: A089~0 created
(DB) INFO: A090 created
(IMP) INFO: import of A090 completed (42 rows)
(DB) INFO: A090~0 created
(DB) INFO: A091 created
(IMP) INFO: import of A091 completed (0 rows)
(DB) INFO: A091~0 created
(DB) INFO: A092 created
(IMP) INFO: import of A092 completed (0 rows)
(DB) INFO: A092~0 created
(DB) INFO: A093 created
(IMP) INFO: import of A093 completed (0 rows)
(DB) INFO: A093~0 created
(DB) INFO: A094 created
(IMP) INFO: import of A094 completed (0 rows)
(DB) INFO: A094~0 created
(DB) INFO: A095 created
(IMP) INFO: import of A095 completed (0 rows)
(DB) INFO: A095~0 created
(DB) INFO: A096 created
(IMP) INFO: import of A096 completed (41 rows)
(DB) INFO: A096~0 created
(DB) INFO: A097 created
(IMP) INFO: import of A097 completed (56 rows)
(DB) INFO: A097~0 created
(DB) INFO: A098 created
(IMP) INFO: import of A098 completed (2 rows)
(DB) INFO: A098~0 created
(DB) INFO: A099 created
(IMP) INFO: import of A099 completed (2 rows)
(DB) INFO: A099~0 created
(DB) INFO: A100 created
(IMP) INFO: import of A100 completed (0 rows)
(DB) INFO: A100~0 created
(DB) INFO: A101 created
(IMP) INFO: import of A101 completed (0 rows)
(DB) INFO: A101~0 created
(DB) INFO: A102 created
(IMP) INFO: import of A102 completed (0 rows)
(DB) INFO: A102~0 created
(DB) INFO: A103 created
(IMP) INFO: import of A103 completed (0 rows)
(DB) INFO: A103~0 created
(DB) INFO: A104 created
(IMP) INFO: import of A104 completed (150 rows)
(DB) INFO: A104~0 created
(DB) INFO: A105 created
(IMP) INFO: import of A105 completed (192 rows)
(DB) INFO: A105~0 created
(DB) INFO: A106 created
(IMP) INFO: import of A106 completed (0 rows)
(DB) INFO: A106~0 created
(DB) INFO: A107 created
(IMP) INFO: import of A107 completed (0 rows)
(DB) INFO: A107~0 created
(DB) INFO: A108 created
(IMP) INFO: import of A108 completed (0 rows)
(DB) INFO: A108~0 created
(DB) INFO: A109 created
(IMP) INFO: import of A109 completed (0 rows)
(DB) INFO: A109~0 created
(DB) INFO: A110 created
(IMP) INFO: import of A110 completed (0 rows)
(DB) INFO: A110~0 created
(DB) INFO: A112 created
(IMP) INFO: import of A112 completed (15 rows)
(DB) INFO: A112~0 created
(DB) INFO: A113 created
(IMP) INFO: import of A113 completed (0 rows)
(DB) INFO: A113~0 created
(DB) INFO: A114 created
(IMP) INFO: import of A114 completed (0 rows)
(DB) INFO: A114~0 created
(DB) INFO: A115 created
(IMP) INFO: import of A115 completed (0 rows)
(DB) INFO: A115~0 created
(DB) INFO: A116 created
(IMP) INFO: import of A116 completed (0 rows)
(DB) INFO: A116~0 created
(DB) INFO: A117 created
(IMP) INFO: import of A117 completed (0 rows)
(DB) INFO: A117~0 created
(DB) INFO: A118 created
(IMP) INFO: import of A118 completed (12 rows)
(DB) INFO: A118~0 created
(DB) INFO: A119 created
(IMP) INFO: import of A119 completed (0 rows)
(DB) INFO: A119~0 created
(DB) INFO: A120 created
(IMP) INFO: import of A120 completed (0 rows)
(DB) INFO: A120~0 created
(DB) INFO: A121 created
(IMP) INFO: import of A121 completed (0 rows)
(DB) INFO: A121~0 created
(DB) INFO: A122 created
(IMP) INFO: import of A122 completed (0 rows)
(DB) INFO: A122~0 created
(DB) INFO: A123 created
(IMP) INFO: import of A123 completed (0 rows)
(DB) INFO: A123~0 created
(DB) INFO: A124 created
(IMP) INFO: import of A124 completed (0 rows)
(DB) INFO: A124~0 created
(DB) INFO: A125 created
(IMP) INFO: import of A125 completed (73 rows)
(DB) INFO: A125~0 created
(DB) INFO: A126 created
(IMP) INFO: import of A126 completed (0 rows)
(DB) INFO: A126~0 created
(DB) INFO: A127 created
(IMP) INFO: import of A127 completed (0 rows)
(DB) INFO: A127~0 created
(DB) INFO: A128 created
(IMP) INFO: import of A128 completed (0 rows)
(DB) INFO: A128~0 created
(DB) INFO: A129 created
(IMP) INFO: import of A129 completed (0 rows)
(DB) INFO: A129~0 created
(DB) INFO: A130 created
(IMP) INFO: import of A130 completed (0 rows)
(DB) INFO: A130~0 created
(DB) INFO: A131 created
(IMP) INFO: import of A131 completed (0 rows)
(DB) INFO: A131~0 created
(DB) INFO: A132 created
(IMP) INFO: import of A132 completed (0 rows)
(DB) INFO: A132~0 created
(DB) INFO: A133 created
(IMP) INFO: import of A133 completed (0 rows)
(DB) INFO: A133~0 created
(DB) INFO: A134 created
(IMP) INFO: import of A134 completed (0 rows)
(DB) INFO: A134~0 created
(DB) INFO: A135 created
(IMP) INFO: import of A135 completed (0 rows)
(DB) INFO: A135~0 created
(DB) INFO: A136 created
(IMP) INFO: import of A136 completed (8 rows)
(DB) INFO: A136~0 created
(DB) INFO: A137 created
(IMP) INFO: import of A137 completed (0 rows)
(DB) INFO: A137~0 created
(DB) INFO: A138 created
(IMP) INFO: import of A138 completed (0 rows)
(DB) INFO: A138~0 created
(DB) INFO: A139 created
(IMP) INFO: import of A139 completed (0 rows)
(DB) INFO: A139~0 created
(DB) INFO: A140 created
(IMP) INFO: import of A140 completed (2 rows)
(DB) INFO: A140~0 created
(DB) INFO: A141 created
(IMP) INFO: import of A141 completed (0 rows)
(DB) INFO: A141~0 created
(DB) INFO: A142 created
(IMP) INFO: import of A142 completed (0 rows)
(DB) INFO: A142~0 created
(DB) INFO: A143 created
(IMP) INFO: import of A143 completed (0 rows)
(DB) INFO: A143~0 created
(DB) INFO: A144 created
(IMP) INFO: import of A144 completed (0 rows)
(DB) INFO: A144~0 created
(DB) INFO: A145 created
(IMP) INFO: import of A145 completed (0 rows)
(DB) INFO: A145~0 created
(DB) INFO: A146 created
(IMP) INFO: import of A146 completed (0 rows)
(DB) INFO: A146~0 created
(DB) INFO: A147 created
(IMP) INFO: import of A147 completed (0 rows)
(DB) INFO: A147~0 created
(DB) INFO: A148 created
(IMP) INFO: import of A148 completed (0 rows)
(DB) INFO: A148~0 created
(DB) INFO: A149 created
(IMP) INFO: import of A149 completed (0 rows)
(DB) INFO: A149~0 created
(DB) INFO: A152 created
(IMP) INFO: import of A152 completed (0 rows)
(DB) INFO: A152~0 created
(DB) INFO: A153 created
(IMP) INFO: import of A153 completed (0 rows)
(DB) INFO: A153~0 created
(DB) INFO: A154 created
(IMP) INFO: import of A154 completed (0 rows)
(DB) INFO: A154~0 created
(DB) INFO: A155 created
(IMP) INFO: import of A155 completed (0 rows)
(DB) INFO: A155~0 created
(DB) INFO: A156 created
(IMP) INFO: import of A156 completed (0 rows)
(DB) INFO: A156~0 created
(DB) INFO: A160 created
(IMP) INFO: import of A160 completed (7 rows)
(DB) INFO: A160~0 created
(DB) INFO: A161 created
(IMP) INFO: import of A161 completed (0 rows)
(DB) INFO: A161~0 created
(DB) INFO: A162 created
(IMP) INFO: import of A162 completed (0 rows)
(DB) INFO: A162~0 created
(DB) INFO: A173 created
(IMP) INFO: import of A173 completed (0 rows)
(DB) INFO: A173~0 created
(DB) INFO: A174 created
(IMP) INFO: import of A174 completed (0 rows)
(DB) INFO: A174~0 created
(DB) INFO: A175 created
(IMP) INFO: import of A175 completed (0 rows)
(DB) INFO: A175~0 created
(DB) INFO: A176 created
(IMP) INFO: import of A176 completed (0 rows)
(DB) INFO: A176~0 created
(DB) INFO: A177 created
(IMP) INFO: import of A177 completed (0 rows)
(DB) INFO: A177~0 created
(DB) INFO: A178 created
(IMP) INFO: import of A178 completed (0 rows)
(DB) INFO: A178~0 created
(DB) INFO: A179 created
(IMP) INFO: import of A179 completed (0 rows)
(DB) INFO: A179~0 created
(DB) INFO: A180 created
(IMP) INFO: import of A180 completed (0 rows)
(DB) INFO: A180~0 created
(DB) INFO: A185 created
(IMP) INFO: import of A185 completed (0 rows)
(DB) INFO: A185~0 created
(DB) INFO: A190 created
(IMP) INFO: import of A190 completed (0 rows)
(DB) INFO: A190~0 created
(DB) INFO: A191 created
(IMP) INFO: import of A191 completed (0 rows)
(DB) INFO: A191~0 created
(DB) INFO: A192 created
(IMP) INFO: import of A192 completed (0 rows)
(DB) INFO: A192~0 created
(DB) INFO: A193 created
(IMP) INFO: import of A193 completed (0 rows)
(DB) INFO: A193~0 created
(DB) INFO: A194 created
(IMP) INFO: import of A194 completed (0 rows)
(DB) INFO: A194~0 created
(DB) INFO: A195 created
(IMP) INFO: import of A195 completed (13 rows)
(DB) INFO: A195~0 created
(DB) INFO: A196 created
(IMP) INFO: import of A196 completed (0 rows)
(DB) INFO: A196~0 created
(DB) INFO: A197 created
(IMP) INFO: import of A197 completed (5 rows)
(DB) INFO: A197~0 created
(DB) INFO: A198 created
(IMP) INFO: import of A198 completed (0 rows)
(DB) INFO: A198~0 created
(DB) INFO: A215 created
(IMP) INFO: import of A215 completed (0 rows)
(DB) INFO: A215~0 created
(DB) INFO: A291 created
(IMP) INFO: import of A291 completed (0 rows)
(DB) INFO: A291~0 created
(DB) INFO: A292 created
(IMP) INFO: import of A292 completed (0 rows)
(DB) INFO: A292~0 created
(DB) INFO: A293 created
(IMP) INFO: import of A293 completed (0 rows)
(DB) INFO: A293~0 created
(DB) INFO: A300 created
(IMP) INFO: import of A300 completed (0 rows)
(DB) INFO: A300~0 created
(DB) INFO: A301 created
(IMP) INFO: import of A301 completed (0 rows)
(DB) INFO: A301~0 created
(DB) INFO: A304 created
(IMP) INFO: import of A304 completed (3414 rows)
(DB) INFO: A304~0 created
(DB) INFO: A305 created
(IMP) INFO: import of A305 completed (54 rows)
(DB) INFO: A305~0 created
(DB) INFO: A306 created
(IMP) INFO: import of A306 completed (0 rows)
(DB) INFO: A306~0 created
(DB) INFO: A307 created
(IMP) INFO: import of A307 completed (0 rows)
(DB) INFO: A307~0 created
(DB) INFO: A310 created
(IMP) INFO: import of A310 completed (0 rows)
(DB) INFO: A310~0 created
(DB) INFO: A311 created
(IMP) INFO: import of A311 completed (0 rows)
(DB) INFO: A311~0 created
(DB) INFO: A312 created
(IMP) INFO: import of A312 completed (0 rows)
(DB) INFO: A312~0 created
(DB) INFO: A315 created
(IMP) INFO: import of A315 completed (0 rows)
(DB) INFO: A315~0 created
(DB) INFO: A316 created
(IMP) INFO: import of A316 completed (0 rows)
(DB) INFO: A316~0 created
(DB) INFO: A317 created
(IMP) INFO: import of A317 completed (0 rows)
(DB) INFO: A317~0 created
(DB) INFO: A320 created
(IMP) INFO: import of A320 completed (0 rows)
(DB) INFO: A320~0 created
(DB) INFO: A321 created
(IMP) INFO: import of A321 completed (0 rows)
(DB) INFO: A321~0 created
(DB) INFO: A325 created
(IMP) INFO: import of A325 completed (0 rows)
(DB) INFO: A325~0 created
(DB) INFO: A326 created
(IMP) INFO: import of A326 completed (0 rows)
(DB) INFO: A326~0 created
(DB) INFO: A330 created
(IMP) INFO: import of A330 completed (0 rows)
(DB) INFO: A330~0 created
(DB) INFO: A331 created
(IMP) INFO: import of A331 completed (0 rows)
(DB) INFO: A331~0 created
(DB) INFO: A335 created
(IMP) INFO: import of A335 completed (0 rows)
(DB) INFO: A335~0 created
(DB) INFO: A336 created
(IMP) INFO: import of A336 completed (0 rows)
(DB) INFO: A336~0 created
(DB) INFO: A340 created
(IMP) INFO: import of A340 completed (0 rows)
(DB) INFO: A340~0 created
(DB) INFO: A341 created
(IMP) INFO: import of A341 completed (0 rows)
(DB) INFO: A341~0 created
(DB) INFO: A342 created
(IMP) INFO: import of A342 completed (0 rows)
(DB) INFO: A342~0 created
(DB) INFO: A343 created
(IMP) INFO: import of A343 completed (0 rows)
(DB) INFO: A343~0 created
(DB) INFO: A344 created
(IMP) INFO: import of A344 completed (0 rows)
(DB) INFO: A344~0 created
(DB) INFO: A345 created
(IMP) INFO: import of A345 completed (0 rows)
(DB) INFO: A345~0 created
(DB) INFO: A346 created
(IMP) INFO: import of A346 completed (0 rows)
(DB) INFO: A346~0 created
(DB) INFO: A347 created
(IMP) INFO: import of A347 completed (0 rows)
(DB) INFO: A347~0 created
(DB) INFO: A348 created
(IMP) INFO: import of A348 completed (0 rows)
(DB) INFO: A348~0 created
(DB) INFO: A349 created
(IMP) INFO: import of A349 completed (0 rows)
(DB) INFO: A349~0 created
(DB) INFO: A350 created
(IMP) INFO: import of A350 completed (0 rows)
(DB) INFO: A350~0 created
(DB) INFO: A352 created
(IMP) INFO: import of A352 completed (0 rows)
(DB) INFO: A352~0 created
(DB) INFO: A353 created
(IMP) INFO: import of A353 completed (0 rows)
(DB) INFO: A353~0 created
(DB) INFO: A354 created
(IMP) INFO: import of A354 completed (0 rows)
(DB) INFO: A354~0 created
(DB) INFO: A355 created
(IMP) INFO: import of A355 completed (0 rows)
(DB) INFO: A355~0 created
(DB) INFO: A356 created
(IMP) INFO: import of A356 completed (0 rows)
(DB) INFO: A356~0 created
(DB) INFO: A357 created
(IMP) INFO: import of A357 completed (0 rows)
(DB) INFO: A357~0 created
(DB) INFO: A358 created
(IMP) INFO: import of A358 completed (0 rows)
(DB) INFO: A358~0 created
(DB) INFO: A359 created
(IMP) INFO: import of A359 completed (0 rows)
(DB) INFO: A359~0 created
(DB) INFO: A362 created
(IMP) INFO: import of A362 completed (0 rows)
(DB) INFO: A362~0 created
(DB) INFO: A363 created
(IMP) INFO: import of A363 completed (0 rows)
(DB) INFO: A363~0 created
(DB) INFO: A364 created
(IMP) INFO: import of A364 completed (0 rows)
(DB) INFO: A364~0 created
(DB) INFO: A365 created
(IMP) INFO: import of A365 completed (0 rows)
(DB) INFO: A365~0 created
(DB) INFO: A366 created
(IMP) INFO: import of A366 completed (0 rows)
(DB) INFO: A366~0 created
(DB) INFO: A367 created
(IMP) INFO: import of A367 completed (0 rows)
(DB) INFO: A367~0 created
(DB) INFO: A368 created
(IMP) INFO: import of A368 completed (0 rows)
(DB) INFO: A368~0 created
(DB) INFO: A369 created
(IMP) INFO: import of A369 completed (0 rows)
(DB) INFO: A369~0 created
(DB) INFO: A371 created
(IMP) INFO: import of A371 completed (0 rows)
(DB) INFO: A371~0 created
(DB) INFO: A372 created
(IMP) INFO: import of A372 completed (0 rows)
(DB) INFO: A372~0 created
(DB) INFO: A373 created
(IMP) INFO: import of A373 completed (0 rows)
(DB) INFO: A373~0 created
(DB) INFO: A374 created
(IMP) INFO: import of A374 completed (0 rows)
(DB) INFO: A374~0 created
(DB) INFO: A375 created
(IMP) INFO: import of A375 completed (0 rows)
(DB) INFO: A375~0 created
(DB) INFO: A376 created
(IMP) INFO: import of A376 completed (0 rows)
(DB) INFO: A376~0 created
(DB) INFO: A382 created
(IMP) INFO: import of A382 completed (0 rows)
(DB) INFO: A382~0 created
(DB) INFO: A390 created
(IMP) INFO: import of A390 completed (4 rows)
(DB) INFO: A390~0 created
(DB) INFO: A392 created
(IMP) INFO: import of A392 completed (0 rows)
(DB) INFO: A392~0 created
(DB) INFO: A393 created
(IMP) INFO: import of A393 completed (0 rows)
(DB) INFO: A393~0 created
(DB) INFO: A394 created
(IMP) INFO: import of A394 completed (0 rows)
(DB) INFO: A394~0 created
(DB) INFO: A395 created
(IMP) INFO: import of A395 completed (5 rows)
(DB) INFO: A395~0 created
(DB) INFO: A396 created
(IMP) INFO: import of A396 completed (0 rows)
(DB) INFO: A396~0 created
(DB) INFO: A397 created
(IMP) INFO: import of A397 completed (0 rows)
(DB) INFO: A397~0 created
(DB) INFO: A399 created
(IMP) INFO: import of A399 completed (0 rows)
(DB) INFO: A399~0 created
(DB) INFO: A441 created
(IMP) INFO: import of A441 completed (0 rows)
(DB) INFO: A441~0 created
(DB) INFO: A502 created
(IMP) INFO: import of A502 completed (58 rows)
(DB) INFO: A502~0 created
(DB) INFO: A503 created
(IMP) INFO: import of A503 completed (7 rows)
(DB) INFO: A503~0 created
(DB) INFO: A504 created
(IMP) INFO: import of A504 completed (4 rows)
(DB) INFO: A504~0 created
(DB) INFO: A506 created
(IMP) INFO: import of A506 completed (10 rows)
(DB) INFO: A506~0 created
(DB) INFO: A507 created
(IMP) INFO: import of A507 completed (0 rows)
(DB) INFO: A507~0 created
(DB) INFO: A510 created
(IMP) INFO: import of A510 completed (0 rows)
(DB) INFO: A510~0 created
(DB) INFO: A511 created
(IMP) INFO: import of A511 completed (0 rows)
(DB) INFO: A511~0 created
(DB) INFO: A518 created
(IMP) INFO: import of A518 completed (0 rows)
(DB) INFO: A518~0 created
(DB) INFO: A599 created
(IMP) INFO: import of A599 completed (0 rows)
(DB) INFO: A599~0 created
(DB) INFO: A601 created
(IMP) INFO: import of A601 completed (3 rows)
(DB) INFO: A601~0 created
(DB) INFO: A755 created
(IMP) INFO: import of A755 completed (0 rows)
(DB) INFO: A755~0 created
(DB) INFO: A800 created
(IMP) INFO: import of A800 completed (1 rows)
(DB) INFO: A800~0 created
(DB) INFO: A801 created
(IMP) INFO: import of A801 completed (0 rows)
(DB) INFO: A801~0 created
(DB) INFO: A805 created
(IMP) INFO: import of A805 completed (0 rows)
(DB) INFO: A805~0 created
(DB) INFO: A810 created
(IMP) INFO: import of A810 completed (0 rows)
(DB) INFO: A810~0 created
(DB) INFO: A815 created
(IMP) INFO: import of A815 completed (0 rows)
(DB) INFO: A815~0 created
(DB) INFO: A816 created
(IMP) INFO: import of A816 completed (1 rows)
(DB) INFO: A816~0 created
(DB) INFO: A817 created
(IMP) INFO: import of A817 completed (0 rows)
(DB) INFO: A817~0 created
(DB) INFO: A818 created
(IMP) INFO: import of A818 completed (6 rows)
(DB) INFO: A818~0 created
(DB) INFO: A819 created
(IMP) INFO: import of A819 completed (0 rows)
(DB) INFO: A819~0 created
(DB) INFO: A900 created
(IMP) INFO: import of A900 completed (250 rows)
(DB) INFO: A900~0 created
(DB) INFO: A902 created
(IMP) INFO: import of A902 completed (0 rows)
(DB) INFO: A902~0 created
(DB) INFO: A903 created
(IMP) INFO: import of A903 completed (11 rows)
(DB) INFO: A903~0 created
(DB) INFO: A933 created
(IMP) INFO: import of A933 completed (0 rows)
(DB) INFO: A933~0 created
(DB) INFO: A940 created
(IMP) INFO: import of A940 completed (0 rows)
(DB) INFO: A940~0 created
(DB) INFO: A941 created
(IMP) INFO: import of A941 completed (0 rows)
(DB) INFO: A941~0 created
(DB) INFO: A942 created
(IMP) INFO: import of A942 completed (0 rows)
(DB) INFO: A942~0 created
(DB) INFO: A972 created
(IMP) INFO: import of A972 completed (0 rows)
(DB) INFO: A972~0 created
(DB) INFO: A973 created
(IMP) INFO: import of A973 completed (0 rows)
(DB) INFO: A973~0 created
(DB) INFO: A974 created
(IMP) INFO: import of A974 completed (0 rows)
(DB) INFO: A974~0 created
(DB) INFO: A976 created
(IMP) INFO: import of A976 completed (0 rows)
(DB) INFO: A976~0 created
(DB) INFO: A977 created
(IMP) INFO: import of A977 completed (0 rows)
(DB) INFO: A977~0 created
(DB) INFO: A994 created
(IMP) INFO: import of A994 completed (0 rows)
(DB) INFO: A994~0 created
(DB) INFO: A997 created
(IMP) INFO: import of A997 completed (0 rows)
(DB) INFO: A997~0 created
(DB) INFO: A998 created
(IMP) INFO: import of A998 completed (1 rows)
(DB) INFO: A998~0 created
(DB) INFO: A999 created
(IMP) INFO: import of A999 completed (0 rows)
(DB) INFO: A999~0 created
(DB) INFO: AAA_KEYS created
(IMP) INFO: import of AAA_KEYS completed (0 rows)
(DB) INFO: AAA_KEYS~0 created
(DB) INFO: AAA_ROLES created
(IMP) INFO: import of AAA_ROLES completed (0 rows)
(DB) INFO: AAA_ROLES~0 created
(DB) INFO: AAA_ROLES2 created
(IMP) INFO: import of AAA_ROLES2 completed (0 rows)
(DB) INFO: AAA_ROLES2~0 created
(DB) INFO: AAA_USERS created
(IMP) INFO: import of AAA_USERS completed (0 rows)
(DB) INFO: AAA_USERS~0 created
(DB) INFO: AAA_VALUES created
(IMP) INFO: import of AAA_VALUES completed (0 rows)
(DB) INFO: AAA_VALUES~0 created
(DB) INFO: AAB_ID_ACT created
(IMP) INFO: import of AAB_ID_ACT completed (0 rows)
(DB) INFO: AAB_ID_ACT~0 created
(DB) INFO: AAB_VAR_ID created
(IMP) INFO: import of AAB_VAR_ID completed (6 rows)
(DB) INFO: AAB_VAR_ID~0 created
(DB) INFO: AAB_VAR_ID~ID1 created
(DB) INFO: AAB_VAR_PROP created
(IMP) INFO: import of AAB_VAR_PROP completed (9 rows)
(DB) INFO: AAB_VAR_PROP~0 created
(DB) INFO: AAB_VAR_PROPT created
(IMP) INFO: import of AAB_VAR_PROPT completed (18 rows)
(DB) INFO: AAB_VAR_PROPT~0 created
(DB) INFO: AAF_ROLES created
(IMP) INFO: import of AAF_ROLES completed (0 rows)
(DB) INFO: AAF_ROLES~0 created
(DB) INFO: AAT_ROLES created
(IMP) INFO: import of AAT_ROLES completed (0 rows)
(DB) INFO: AAT_ROLES~0 created
(DB) INFO: AAT_USERS created
(IMP) INFO: import of AAT_USERS completed (0 rows)
(DB) INFO: AAT_USERS~0 created
(DB) INFO: AAT_VALUES created
(IMP) INFO: import of AAT_VALUES completed (0 rows)
(DB) INFO: AAT_VALUES~0 created
(DB) INFO: AAUSVAR created
(IMP) INFO: import of AAUSVAR completed (0 rows)
(DB) INFO: AAUSVAR~0 created
(DB) INFO: ABAPHTML created
(IMP) INFO: import of ABAPHTML completed (859 rows)
(DB) INFO: ABAPHTML~0 created
(DB) INFO: ABAPTREE created
(IMP) INFO: import of ABAPTREE completed (487 rows)
(DB) INFO: ABAPTREE~0 created
(DB) INFO: ABAPTREET created
(IMP) INFO: import of ABAPTREET completed (7814 rows)
(DB) INFO: ABAPTREET~0 created
(DB) INFO: ABDOCMODE created
(IMP) INFO: import of ABDOCMODE completed (78 rows)
(DB) INFO: ABDOCMODE~0 created
(DB) INFO: ACAC_OBJECTS created
(IMP) INFO: import of ACAC_OBJECTS completed (0 rows)
(DB) INFO: ACAC_OBJECTS~0 created
(DB) INFO: ACAC_OBJECTS~1 created
(DB) INFO: ACCRBD created
(IMP) INFO: import of ACCRBD completed (0 rows)
(DB) INFO: ACCRBD~0 created
(DB) INFO: ACCRBD~1 created
(DB) INFO: ACCRFI created
(IMP) INFO: import of ACCRFI completed (0 rows)
(DB) INFO: ACCRFI~0 created
(DB) INFO: ACEDSASSGMT created
(IMP) INFO: import of ACEDSASSGMT completed (0 rows)
(DB) INFO: ACEDSASSGMT~0 created
(DB) INFO: ACEDSOH created
(IMP) INFO: import of ACEDSOH completed (0 rows)
(DB) INFO: ACEDSOH~0 created
(DB) INFO: ACEDSOI created
(IMP) INFO: import of ACEDSOI completed (0 rows)
(DB) INFO: ACEDSOI~0 created
(DB) INFO: ACEDSOP created
(IMP) INFO: import of ACEDSOP completed (0 rows)
(DB) INFO: ACEDSOP~0 created
(DB) INFO: ACEOBJ created
(IMP) INFO: import of ACEOBJ completed (0 rows)
(DB) INFO: ACEOBJ~0 created
(DB) INFO: ACEOBJ~001 created
(DB) INFO: ACE_SOP_DESTINTN created
(IMP) INFO: import of ACE_SOP_DESTINTN completed (0 rows)
(DB) INFO: ACE_SOP_DESTINTN~0 created
(DB) INFO: ACE_SOP_FFVERSNS created
(IMP) INFO: import of ACE_SOP_FFVERSNS completed (1 rows)
(DB) INFO: ACE_SOP_FFVERSNS~0 created
(DB) INFO: ACE_SOP_FFVRSTXT created
(IMP) INFO: import of ACE_SOP_FFVRSTXT completed (18 rows)
(DB) INFO: ACE_SOP_FFVRSTXT~0 created
(DB) INFO: ACE_SOP_INVERSNS created
(IMP) INFO: import of ACE_SOP_INVERSNS completed (0 rows)
(DB) INFO: ACE_SOP_INVERSNS~0 created
(DB) INFO: ACE_SOP_INVRSTXT created
(IMP) INFO: import of ACE_SOP_INVRSTXT completed (0 rows)
(DB) INFO: ACE_SOP_INVRSTXT~0 created
(DB) INFO: ACE_SOP_REFKEY created
(IMP) INFO: import of ACE_SOP_REFKEY completed (0 -
Homogeneous System Copy using DB6 specific procedure
Hello all,
I'd like to do homogeneous system copy from source system(hostname: host01) to target system(hostname: host02) using DB2 backup/restore procedure.
Because SAP database has some tables related their hostname, I think it cause some conflicts between target system's hostname(host02) and the records in the new database on target system(it still remains "host01").
Can I avoid this conflicts if I use DB6 redirected restore method?
Or do I have to do R3load export/import like hetero system copy?
I know I can start SAP system when I set SAPLOCALHOST=host01 in instance profile on host02, but is there any other good workaround?
I wonder how you will do if you face this situation.
Any comments would be appreciated.
Regards, IkueHi dirk,
Thank you for your reply.
As you mentioned, System copy often brings changing hostname, so the post processing in the SAP's Guide should cover all of influences.
I had thought SAP database does not contain hostname entries anymore, but, I found one table which contains DBHOST name in ECC database: SAP<SID>.DB6NAVSYST
ex) SID=ST8, hostname=athens
athens:db2st8 66> db2 "select DBHOST from SAPST8.DB6NAVSYST"
DBHOST
athens
1 record(s) selected.
Can I believe these entries will be adjusted during System Copy operation along SAP's Guide(both DB2 backup/restore and R3load)?
If Yes, when does adjusting occur? (at post processing or during SAPinst?)
I have very negative impression of changing hostname of SAP system since I read Note 8307...
Does SAP support change hostname if I do System Copy?
Best regards,
Ikue -
Homogeneous system copy on iseries
Hello All,
We are planning to refresh our R/3 development system (SID: R3D) by doing homogeneous system copy using production data (SID: R3P).
There are couple of open transports in development system and I donu2019t want to overwrite those in the process of system copy.
also I donu2019t want to over write users idu2019s and passwords.
When i goggled, I found a procedure to execute a User Master Export SCC8 (client export) for profile: SAP_USER.
After creating a transport with users master datau2026 should I copy the transport co and data files to some other location, so that it doesn't get over written?
Should i save all CO and data files of transports from u201CR3Du201D into a separate folder and reimport into one by one after reconfiguring TMS?
Is there any procedure to save all variants in the system and apply the same after system copy?
Thanks a lot in advance.Hello rk_007,
but I do not see a real solution for your issues except the users ... SAP_USERS is ok and can be used at any time. All the rest will delete ALL tables and replace it with the copy.
So, when you do a system refresh from R3P to R3D and then replace with SAP_UCSV ALL application data will be deleted ;-((
You cannot conserve open transports as well. You have to close them, and reimport later on again and open new ones for the missing functionality,
So, the process is a bit more complicated in a 2-system landscape as you might think.
Would be a client export of R3P perhaps sufficient ?
The versions of ABAPs are lost as well ... you should backup them before deleting R3D.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de -
Homogeneous system copy ( sapinst or db specific method )
I want to make homogeneous system copy ( NW7 ) of ECC6 from PRD to make a QA system on HPUX/Oracle environment. I am wondering which of the following method is better way to go
System copy with the help of sapinst
or
Database specific method
What are the steps of each method?
Please help, your help will be highly appreciated.
Best Regards,
-AlHi Al,
Using sapinst is the supported method by SAP but it takes much longer as you'll need to export/import the data and doing this affects availability of your PRD system. Most companies perform DB backup/restore as it is much quicker and does not require an outage of your PRD system (if you have online backups). Different databases have different tools for this operations. Since it only a QA system, I would suggest you do a DB backup/restore.
Regards,
Thomas Pham -
Homogeneous System Copy failing on Phase Running J2EE Migration
Hi All,
I am running a Homogeneous System Copy according to the System Copy manual. (SAPinst not SV/RST) It is failing on Phase Running J2EE Migration which tells me to look at my RUNJMT.log (below), but it doesn't seem to give me much direction. As anyone run into this before?:
An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > IBM DB2 for i5/OS > Target System Installation > Central System > Based on AS ABAP and AS Java > Central System( Last error reported by the step :Error when running the Java Migration Toolkit. SOLUTION: See output of logfile Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS//runJmt.log: ' com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server, at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108) at com.sap.engine.core.configuration.impl.cache.CachedConfiguration. (CachedConfiguration.java:62) at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848) at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882) at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748) at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734) at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693) at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54) at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108) at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174) at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129) at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403) at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)'.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/.
runjmt.log:
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)Here is version '9' fo the SAPinst.log
INFO 2010-06-15 09:20:24.952
Creating file Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS\x.
INFO 2010-06-15 09:20:24.952
Removing file Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS\x.
INFO 2010-06-15 09:21:12.656
Creating file C:\Program Files (x86)\SAPinst\x.
INFO 2010-06-15 09:21:12.656
Removing file C:\Program Files (x86)\SAPinst\x.
INFO 2010-06-15 09:21:28.313
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.24.xml'.
INFO 2010-06-15 09:21:39.798
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.25.xml'.
WARNING 2010-06-15 09:22:11.095
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
INFO 2010-06-15 09:22:18.595
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/inifile.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/inifile.9.xml'.
INFO 2010-06-15 09:22:23.798
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/keydb.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/keydb.9.xml'.
INFO 2010-06-15 09:22:38.814
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.26.xml'.
INFO 2010-06-15 09:22:45.908
Execute step RunMigrationController of component |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0
INFO 2010-06-15 09:23:25.675
Creating file Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS\runJmt.log.
INFO 2010-06-15 09:23:32.175
Working directory changed to Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/jmt.
INFO 2010-06-15 09:23:39.800
Working directory changed to Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS.
INFO 2010-06-15 09:23:39.956
Removed environment variable JANITOR_400 from current process environment.
INFO 2010-06-15 09:23:44.878
Output of \qopensys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath /usr/sap/BID/SYS/global/sltools/sharedlib/launcher.jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/BID/SYS/global/sltools/jmt:/usr/sap/BID/SYS/global/sltools/sharedlib import.switch resume downtime mti.properties is written to the logfile Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/runJmt.log.
WARNING 2010-06-15 09:23:45.456
Execution of the command "\qopensys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath /usr/sap/BID/SYS/global/sltools/sharedlib/launcher.jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/BID/SYS/global/sltools/jmt:/usr/sap/BID/SYS/global/sltools/sharedlib import.switch resume downtime mti.properties" finished with return code 2. Output:
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
ERROR 2010-06-15 09:23:45.534
CJS-20068 Error when running the Java Migration Toolkit. SOLUTION: See output of logfile Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS//runJmt.log: '
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)'.
ERROR 2010-06-15 09:23:45.534
CJS-20068 Error when running the Java Migration Toolkit. SOLUTION: See output of logfile Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS//runJmt.log: '
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)'.
ERROR 2010-06-15 09:23:46.644
FCO-00011 The step RunMigrationController with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|RunMigrationController was executed with status ERROR ( Last error reported by the step :Error when running the Java Migration Toolkit. SOLUTION: See output of logfile Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS//runJmt.log: '
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)'.).
INFO 2010-06-15 09:26:38.491
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|RunMigrationController".
INFO 2010-06-15 09:29:23.322
Creating file C:\Program Files (x86)\SAPinst\.lastInstallationLocation.
INFO 2010-06-15 09:29:29.510
Creating file Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS\__instana_tmp.xml.
Maybe you are looking for
-
Can not view all apps from app world on my playbook
I just got my playbook for Christmas. My brothers and my sister got one as well. They are seeing and downloading apps that I can not. They are all the same. I am trying see and down load Jetpack Joyride. Please help. Solved! Go to Solution.
-
IPod Classic won't copy playlists to iTunes 12.1
I have a first gen iPod Classic 160gb. It has numerous playlists on it. I recently had to wipe the computer I use for iTunes and lost all the playlists I had. I thought, no matter, they are on the iPod and I can transfer them back over (because I act
-
Importing Nikon NEF Raw files into iPhoto
Recently I purchased a Nikon D810 camera and have been trying out various settings to determine the quality of picture I can get. As a way to run through the test, I took pictures with different RAW (NEF) settings. I also took pictures in JPG format
-
Turn photo black and white and leave one paert color
turn photo black and white with one object color
-
Is it possible to deploy Websites/Cloud services using Releasemanagement
Hi, I am trying to implement continuous integration and delivery using VSO and RM for my web sites with Sql azure. But I didn't find the way to deploy the Azure PaaS Services. Please guide me how can I achieve this. I can deploy the website