Honda Hands Free link causes phone to reboot

I have my phone paired with my Honda hands free link however when I receive phone calls my phone will reboot. I have set the Bluetooth options to always trust this device and still am having the issue. Any recommendations?

Honda has an entire troubleshooting site for HandsFreeLink. It's available to technicians and the public alike. I wonder if your technician even bothered to look at the HFL site. Many techs seem to be unaware of Honda's own online help.
Go here:
http://handsfreelink.com/
Choose your vehicle and cell carrier. There is very extensive information available.
Despite the site not having "Honda" in its URL, it is operated by American Honda.
You did not say what model or year of Honda you have, otherwise I'd look things up for you.

Similar Messages

  • Ii Phone 5 Not Discoverible Acura Hands Free Link

    Has anyone else had issues with Acura's/Honda's Hands Free Link not discovering the iphone 5 therefore, unable to use the Hands free Link. It work great all all of a sudden it doesn't. I have done everything, spoke with Acura, they testing my Hands Free Link System and it's working fine. Any help would be greatly appreciated!

    InnaB, this is an issue with iPhone. This is just MY speculation, hope Apple will release a fix soon. You can also leave a feedback here http://www.apple.com/feedback/iphone.html and PLEASE enter specific information of vehicle like Model, year and type of radio or Audio System your vehicle is equipped with when you fill out that feedback. I have encountered similar issues with other makes of cars too as I do a lot of testing of cars.There are some vehicles that work fine and then there are some that exhibit concerns like yours.
    On a side note have you tried to RESET NETWORK settings and tried? Also unpair ALL BT sets, re-pair the iPhone to your vehicle and try it. Some instances I have encountered where the IiPhone was STILL paired to a HEADSET, it would NOT release it to work with another BT device. Some car audio systems have what's called an "Auto Pairing" which works awesome with iPhone, where you DONOT have to worry at all, start the vehicle, turn on audio system, iPhone auto pairs to that system. I donot know IF your vehicle is equipped with that design, check in the user manual of that system please.

  • Hand-free link in Accura MDX cannot connect to phone after update IOS 7.1.2

    After I updated the IOS 7.1.2 on both my iPhone 5s, the hand-free link in my MDX 2005  cannot connect/recognize to both my phones anymore.  What should I do? Please HELP!

    Apparently there are no supported carriers in Pakistan. So the carrier update was for a non-Pakistani carrier. If it worked in the past your phone was probably hacked to add local carrier support.

  • Iphone 4   Pairing   2010 Honda Civic with hands free link.

    I purchased this vehicle several months ago and paired my iphone with the hands free link with no problem.  All the sudden last week I started my car and noticed that the hands free did not connect.  I haver since tried numerous things, such as deleting the phone from history from the car system and try to pair again with no success.
    The iphone picks up the hands free link system. The hands free link gives the pair code (0000).  I enter the code, but then a message on the iphone states the code is correct but the pair was unsuccessful.  How can I correct this?  Thanks.

    Remove the phone from the device list in the vehicle. Remove the vehicle from the device list on the phone. Do a reset on the phone, holding the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, turn Bluetooth on for the phone. Then go into the vehicle and follow the manufacturer's instructions for putting the vehicle into pairing mode. See if you can pair the two devices.
    On occasion, devices will not always connect automatically. If after the devices pair this happens, just go into the Bluetooth setting on the phone, locate the listing for the car and tap on it. It should connect then. This will prevent the need to try and pair the two devices again.
    You can also see if this support document helps you any. http://support.apple.com/kb/TS3581

  • Bluetooth: Volume Issue (Palm Pixi, Hands Free Link Bluetooth)

    Make/Model: Acura TL
    Year: 2008
    Carkit Model info (Manufacturer, firmware version, etc):
    Details of problem: Call volume is so quiet you can't hear anything on bluetooth HFL (Hands Free Link)
    webOS version:.4.5
    Included in compatibility list:
    Yesterday morning the built-in bluetooth on my car was working fine, then at lunch when I tried to use it it was impossible to hear the call.  I checked the phone and the volume is turned up all the way, and the bluetooth HFL is working fine with my husband's phone, so the issue has to be with my Palm Pixi.  I can hear the HFL commands and prompts without issue at a normal volume level (8-10) but to hear even a whisper of a conversation or even a ringtone I have to turn the volume up to about 40.
    I've tried to search on my Pixi to see if there are any settings I can adjust or update, but haven't been able to find anything.
    Anyone have suggestions about how to correct/address this issue?
    Post relates to: Pixi p120eww (Sprint)

    You have to go through the entire pairing process or can you just turn off Bluetooth and then turn it back on again, or go into the phone and select the car and they connect? If you are having to go through the pairing process again, it could be a problem with the vehicle. The iPhone uses the latest Bluetooth stack and it may be a problem with pairing with the vehicle system. Try contacting Honda/Acura and see if there are any firmware updates for the systems in the vehicle.

  • HT204387 pair iPhone 5s running iOs7 with Hands free link in Acura TL

    I cannot get my iPhone 5s running iOs 7.0.4 paired with my 2005 Acura TL blutooth, HFL (hand free link). My old 3G paired with no problem. I have tried to reboot iPhone, changed the name of my phone, tried 000, 1234, 1010 for code, etc. Any help would be appreciated.

    Hi Judel762,
    If you are having issues pairing your new iPhone to your car's Bluetooth, you may find the following article helpful:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    Regards,
    - Brenden

  • Hand Free Link when in Maps

    When I get in my Honda accord and my iphone 6 links up via bluetooth, then use maps, it always defaults to giving map directions via the hands free link (honda speaker system).  Each time I start a map I can click on microphone and tell it to use iphone rather than hands free link.  Is there a way that I can set things up so that it always defaults to iphone?  Also when I use google maps, I would also like it to use iphone for audio.  Can't find out how to change this in google maps.
    Also, is google maps more reliable than the iphone maps?

    Just as a side question:
    Have you ever loaded a tracklog containing different tracks belonging to more than 1 month?
    This is what a tracklog with tracks from 10/14/2011 to 11/07/2011 looks like here:
    Dropdown for the first November 2011 row:
    Dropdown for the second November 2011 row:
    Not a big problem, but also not nice.
    Beat
    Message was edited by: b_gossweiler: cosmetics

  • I can hear caller but he can't hear me except on hands free and speaker phone

    I can hear caller but he can't hear me except on hands free and speaker phone, hoew to fix this problem

    Hi Shirley,
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • Pair phone to Acura hands free link not working

    I've deleted all paired phones and other Bluetooth devices. I still am unabl

     Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    In all honesty this sounds like a compatibility issues, I suggest contacting the Manufacturer of the BT device and asking if this device is compatible or not, they may even be able to supply firmware update instructions.
    You could also try resetting the in car BT as well, this would remove all previous BT profiles for other devices, which may be causing an issue.
    I apologize for any inconvenience this may cause.
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Syncing with Link causes phone to get warm?

    Hello, I have a STL-3 BB Z10 on ATT and I was syncing a lot of pictures using BB Link.
    My phone warmed up quite a bit.
    One temp app said 95, another said 100F???
    This wasn't for a horribly long time.
    Is this normal?
    Is there any damage to my phone?
    My laptop hibernated and I ended up turning my device off and removing the battery for safe measure.
    Thoughts?
    Edit:  It was noticably warm where the phone was plugged in to the USB port (and around the battery).  The rest of the phone wasn't warm at all.

    Honda has an entire troubleshooting site for HandsFreeLink. It's available to technicians and the public alike. I wonder if your technician even bothered to look at the HFL site. Many techs seem to be unaware of Honda's own online help.
    Go here:
    http://handsfreelink.com/
    Choose your vehicle and cell carrier. There is very extensive information available.
    Despite the site not having "Honda" in its URL, it is operated by American Honda.
    You did not say what model or year of Honda you have, otherwise I'd look things up for you.

  • Upgraded to iOS5 on my Verizon iPhone4-Incoming calls causes phone to reboot?

    It took a few attempts before the upgrade was successful and everything appeared to be great until I started receiving phone calls today. Each time the call would come in I would go to slide to answer the call and screen goes blank then the white apple appears and the phone reboots and comes back to life with no indication the call came in?
    George Marsh
    Williamsburg, VA

    ok js_stephens I did some searching and found an answer for this that worked for me. I plugged my iphone into my computer, then clicked on the ringtone tab under my iphone in itunes, unchecked the sync ringtones, did a sync, then rechecked the sync ringtones and they magically appeared back on my phone! hope it works for ya!

  • Why can I only hear calls on my hands-free or speaker phone?

    Hello
    I have an issue. All alarms, ring tones and text alerts are heard perfectly yet I cannot receive calls or play my iPod through the speakers of my iPhone 4.
    If anyone could help it would be much appreciated. I have tried the 'jiggle headphones in and out of headphone jack' trick as well as restoring the phone. I have no idea what to try next and it would be ace if someone could come and save me.
    Cheers,
    Georgia

    This may sound stupid, but it happened to me. Are you sure you peeled the plastic covering the screen off? It comes with the plastic covering the speaker.

  • Hands Free Link (HFL) on Acura TL does not work with iPhone 3G

    I pair iPhone successfully, and can pick up the incoming calls. However, when I make an outgoing call on iPhone, and tell it to use HFL, the call is not transferred to HFL.
    HFL works fine with my Treo 650, including picking the outgoing calls.
    Is there a software update or setting for either iPhone or Acura?
    Thanks,
    Inna

    InnaB, this is an issue with iPhone. This is just MY speculation, hope Apple will release a fix soon. You can also leave a feedback here http://www.apple.com/feedback/iphone.html and PLEASE enter specific information of vehicle like Model, year and type of radio or Audio System your vehicle is equipped with when you fill out that feedback. I have encountered similar issues with other makes of cars too as I do a lot of testing of cars.There are some vehicles that work fine and then there are some that exhibit concerns like yours.
    On a side note have you tried to RESET NETWORK settings and tried? Also unpair ALL BT sets, re-pair the iPhone to your vehicle and try it. Some instances I have encountered where the IiPhone was STILL paired to a HEADSET, it would NOT release it to work with another BT device. Some car audio systems have what's called an "Auto Pairing" which works awesome with iPhone, where you DONOT have to worry at all, start the vehicle, turn on audio system, iPhone auto pairs to that system. I donot know IF your vehicle is equipped with that design, check in the user manual of that system please.

  • Hands free in a Honda

    My old motorola V547 worked perfectly with my Honda hands free but I see that, like me, others have had problems getting their 6230i to stay linked up permanently. I can pair and connect and even make a hands free call ! BUT if the car or the phone is switched off the only way I can get the system to work again is to remove the pairing and start again. I only bought the phone this week but I will have to take it back for a refund unless someone can put me out of my misery by telling me what I need to do to sort this out. Their have been suggestions before but without confirmation of any success.

    Hi
    Your "work around" is the only solution I've been able to come up with as well - as you say - hardly hands free, but the only way you can get it to make a call that isn't in the cars 50x misely voice tag memory.
    Have you noticed also that when you first start the car, it hardly ever understands your first voice comand ? It's as if the car has to load the software before it can work. It's the same with voice commands for the audio, climate control & sat nav - I think the woman behind the dash board falls asleep & has to be woke up every time you set off !!! Once you've used it once she is back up to speed till you switch off & re-start the engine.
    With regard to the noise levels in the car & people not hearing you above 40 mph I have exactly the same problem, my garage have changed the mic on my car kit & it made no difference at all !!! I also had a modification made to the wing mirrors to cut down the wind noise (have you had this done ?) but every day someone tells me I sound as if I'm speaking from the bottom of a pit !!!
    Other car kits I've had over the years have worked fine with good clarity both ways & cost a lot less.
    It could be such a good system with just a few tweeks !!

  • IPhone 4 can’t connect with BMW Bluetooth hand free

    Dear all,
    Afterupdate to 4.3.3 my iPhone 4 isn’t recognize by my BMW hand free Bluetoothsystem, why??
    Is sodangerous to not have my hand free… my other phone HTC is still working verywell…
    Thanks inadvance
    PS 1 I have reset and try to reconnect my IPhone… no way!
    PS 2 Why the IOS4.3.3 doesn’t exist as possible choice in the community?

    I am also having this problem.  I can make calls right after deleting and repairing my phone and my bmw but it doesn't work awhile later.  was working fine prior to 4.3.3.  I have passcode key lock on that caused problems in the past but was working again in recent versions.  2006 e90 no idrive.

Maybe you are looking for

  • JSR 168 and Web Services For Remote Portlets

    Hi,    I have recently joined SAP.In my previous work experience I have worked extensively on the Sun Java Portal Server and was curious about the following 1.Does SAP Enterprise Portal Server support JSR 168 compliant Portlets. 2.If yes the Question

  • Formatting Double value.

    Hai all, Please help me in this........ I have to set Double value in JTable with two fraction digit (example: 111.00) I tried fromatters but all formatters returning a String. I f set as a string it shows me as 111.00 If i set as a Double It shows m

  • SCCM 2012 Client Communication

    Hellooo,  Migrated my clients to SCCM 2012 but still reporting to SCCM 2007 Server only .  Why so ? Note : MY SCCM 2007 Server still active mode only . Am sure  Best Regard's Krishna

  • Filters for Blown out camera and color shots for CS5

    What are some good filters to fix blown out camer and color shots in CS5? Thanks,

  • Using a 2nd computer for ipod temporarily

    hey guys my main computer that my ipod/itunes is synced to is broken atm, i want to use my laptop to remove a few gig worth of files..how do i go about this? i have a 160gig ipod full, so dont want to transfer it all to laptop is there anyway of gett