Honestly I'm sure...

..I can find the solution to this, but I am running out of time this week AND i'm a Arch Linux newbee too.
The problem is I'm not beeing able to access my digital camera thru the USB device.
This is the error message F-Spot shows me
An unhandled exception was thrown: F-Spot cannot find the Dbus session bus. Make sure dbus is configured properly or start a new session for f-spot using "dbus-launch f-spot"
at FSpot.Driver.Main (System.String[] args) [0x00000]
.NET Version: 2.0.50727.42
Assembly Version Information:
gdk-sharp (2.10.0.0)
gnome-vfs-sharp (2.16.0.0)
Mono.Addins (0.2.0.0)
NDesk.DBus.GLib (0.3.0.0)
NDesk.DBus (1.0.0.0)
System (2.0.0.0)
Mono.Posix (2.0.0.0)
atk-sharp (2.10.0.0)
gtk-sharp (2.10.0.0)
Mono.Addins.Setup (0.2.0.0)
glib-sharp (2.10.0.0)
gnome-sharp (2.16.0.0)
f-spot (0.4.0.0)
Mono.GetOptions (2.0.0.0)
mscorlib (2.0.0.0)
Platform Information: Linux 2.6.22-ARCH i686 GenuineIntel GNU/Linux
Distribution Information:
[/etc/arch-release]
I would be thankful if anyone could help me with this!!
Thanks anyway,
Maurício

An unhandled exception was thrown: F-Spot cannot find the Dbus session bus. Make sure dbus is configured properly or start a new session for f-spot using "dbus-launch f-spot
Make sure dbus is installed and added to the DAEMONS array in /etc/rc.conf. If it's not installed, make sure you start it after you install it with sudo /etc/rc.d/dbus start
If that still doesn't help try the dbus-launch method indicated in the error message

Similar Messages

Can I connect my new touch on my MacOS to the iTunes apple id same as other touch I'm still using and not lose everything, and how?

Hi,
I have a Ipod Touch that I have an apple ID for and have set up on my MAC OS with Itunes and all that jazz.
I however fully admit I know very little about properly using Itunes especially when I get new Ipods. Case and Point = I have 6 different Ipod versions and have never known how to transfer the music from any on of them to a new one or add it to one library because one time when plugging in a Ipod nano I lost everything off my other ipod nano and my library and it all just didn't work out well.
Now I have another Ipod Touch. I learned that you should use the same apple id for a new Ipod-thats something new I didn't know. The others are under Id's and emails I don't even remember honestly. Not sure how I'll ever fix that.
I've read about 2 user accounts. Get stuck with something about a key on my mac wanting authorization when I had two accounts, so thats just out.
I've read about 2 libraries, but do not really understand the process & have not gotten anywhere with the pressing option while opening ITunes-Do I have to have my second touch plugged in first? That doesn't seem right.
My Main question, well, one of em: I set up the second touch with same Apple ID but I have not attached to my Mac Because I am afraid of whatever may happen. So: Will my Mac say "Hey, what's this Second ipod and what's your purpose kinda deal?" or Will it replace my other ipod and wipe it blank, my Mac then saying some other choice words to me about the attempt of two ipods. . .?
So-My Goal here: When I open ITunes or it opens when connected to one of the touches (at this point I've lost hope on the other ipods for now) how do I make it so that under devices it shows the names of Two Different Ipods-I did name them differently if that matters. And How then do I make the Mac know which touch I connect or will it just Know by the powers that be? And How Can I Split some of the data from my 1st touch to my 2nd touch? And Add new data to one or the other or both.
My No Logic behind it Easy idea I wonder of: Can I just connect the new Blank touch in to my mac that already has a touch with Data on it, both under the same email and apple id, and have nothing go wrong? Will my Mac set it up like a new ipod and list it as a new one under devices ? ? Then Ask another question on how to transfer some of my data from one to the other in another Incredibly Long post, such as this?
Sharing between the two (and maybe the others later one): I only have 1 MAC so the whole home share doesn't seem to help me here. But I've read of familys-whole families!-having multiple ipod users, I'm guessing under the same apple ID? ? ? I don't really know, anyway, and they can sync the data from one area, or different libraries for each. HOW? And what's best for me to do, or rather, since you see how little I understand of this entire process, which method do you think I can actually complete without messing something or everything up?:)
Any help here would be great. I sincerely apologize if this is a repeat and I just don't get the other questions or answers. I'd just really like to figure this out so that my 6 other Ipods from past years with complete music libraries and forever unseen photos -once they had a camera-yeah, it goes back that far . . . It'd be nice to actually have all that back, or at least accessible without fear that it'll all disappear. What would happen if I connnected an Ipod nano that I think has another apple ID to my MAC? Would Itunes like fizz out and banish my touch or something? Yeah, I need help. I can use em. . .does not mean you have to be smarter than the device apparently. Well, its Itunes that really just doesn't get along with me or my devices I think. . .Thank you for any ideas on simplifying this all for me.

Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Bluetooth on a nokia

I am trying to develop an app that uses bluetooth for my nokia 6102i phone, but I am having trouble figuring out whether or not that is even possible.
The reason I doubt the possibility of this is that my phone is not on the list of devices that have Jsr - 82 embedded in them. (http://www.javabluetooth.com/jsr82devices.html) I realize that this may not be required for bluetooth apps, but I honestly have no idea one way or the other.
Also, on the nokia developer website, they talk about Series numbers like S80 or S60 and the like, but my phone is only an S40. I'm honestly not exactly sure what that means, but here are the phone specs: http://forum.nokia.com/devices/6102i
In the section titled java technology in the above specs, it lists the following:
MIDP 2.0
CLDC 1.1
JSR 120 Wireless Messaging API
JSR 135 Mobile Media API
JSR 185 JTWI
JSR 75 FileConnection and PIM API
Nokia UI API
My guess would be that the JSR 120 provides bluetooth connectivity, but again, I'm not sure.
So, basically what I'm asking is whether or not it is possible to program an app for my phone that utilizes bluetooth connectivity, and if so, where a good place to start is.
Thanks

No, there's no way to program bluetooth on this device. There's also no other possibility to program in any other language than Java.
If you consider buying an older, cheap device, I'd recommend the 6230i. You can program bluetooth applications for this device and due to the fact that it's quite outdated, it should be easily available for few money. All in all it's a quite nice device which doesn't make any trouble while programming (in comparison for motorola devices, e.g.).

My Time Machine won't back up and files won't open when double clicked.

I'm not sure if these are related, but recently my MacBook Pro has been acting much more sluggish than usual.
To start, I have a 13in MacBook Pro Mid 2012 model with a 2.5 GHz Intel Core i5 processor and 4 GB 1600 MHz DDR3 memory. I've got it new in the summer of 2012, and haven't had any real problems until now. I have a 1TB Hitachi external hard drive with over 600GB left of storage. I'm running Yosemite.
Lately, as in the past few weeks but more noticeably the past few days, I can't open files if I just double click on them from my desktop or from searching them outside of the application. For instance, if I click on a word document on my desktop, it will cause the work icon to bounce for a while, pretending to open, but it never does. If the application is already running, the file just won't open. If I search from the "open" selection within the application, it works fine. This is true for all of my Microsoft Office apps, Photoshop, Preview, iTunes, and everything in between, all of which I had never had a problem with before.
Next, anytime I try to backup my system using Time Machine, it simply shows the "Preparing Backup" status and never starts. I've had the hard drive and used it as a Time Machine since I got the computer, and have had zero problems at all.
I've tried CleanMyMac2, Memory Clean, and I've always kept my Mac very clean and organized, as in no duplicate files, moving my biggest files onto my hard drive, and deleting any of my unnecessary files. I know I don't have a ton of RAM left, but I'm honestly not completely sure what to do about that, as this model apparently doesn't have RAM updates available.
Think you all can help?
Thanks so much.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I've received a gmail email from Microsoft account team saying We detected something unusual about a recent sign-in to the Microsoft account ******* To help keep you safe, we required an extra security challenge. I then asks to follow link and sign in

Please help because since I've received an email from Microsoft warning they have detected suspicious activity on our Microsoft email account (wasn't even aware my gmail account had anything to do with Microsoft) I have been receiving other odd emails which consist of one or two huge lines of text in bright blue, usually to do with debt or one the Grand National and betting. These emails do no appear to be addressed to me but I'm still receiving them. I have put them all into the Junk Folder (by the way is that the same as reporting them as spam on and iPhone or iPad?)
I'm still concerned about this Microsoft email though. It advises that we need to give some extra security information for them to be able to protect us in future (which initially looked to me as if it may be a phishing email). If I follow the link it takes me to a page that looks fairly official and could well be Microsoft, I then asks me to sign in using username and password.
To be honest Im not sure I even have a Microsoft username or password and I'm concerned even if I did know it, whether I should be filling in that information or not? Also what's likely to happen once I've signed in? I'm concerned that once I had entered their site they would just be phishing for more information?
Just in case there is any relevance around about the time of receiving this email I and performed two fairly unusual actions.
1. I contacted an American company to ask if they would sell something to the UK.
2. I started using Keychain on my iPhone and iPad and signed in to all the shops and sites I use with my usual password and changed them all the keychain suggested passwords.
Typical trying to make myself safer and yet I'm now concerned I could be in danger.
Please can someone advise me on what I should do about this email, i,e, is it a phishing mail and should I Junk it or should I answer it and try and sign in and if I should answer it how do I know what my Microsoft sign in and password is?
Also can someone tell me how I report spam on my iPhone and iPad in a gmail account?
Sorry I've rattled on so much and I'm asking so many questions but they are all connected.

Shelady wrote:
... (wasn't even aware my gmail account had anything to do with Microsoft) ...
It doesn't. Gmail is owned by Google.
Shelady wrote:
Also can someone tell me how I report spam on my iPhone and iPad in a gmail account?
Report it to Google:

Need help migrating 2006 Macbook Pro to 2012 Macbook Pro

Hi -- The screen on my 2006 Macbook Pro (running 10.9.2) completely stopped working last weekend. It doesn't light up at all. I've tried everything under the sun to get it functioning again but I believe it is just totally dead. I tried plugging an external monitor, mouse and keyboard into it and cannot get it to show up on the screen, which is driving me crazy! The monitor works just fine with my 2011 Mac Mini (running 10.6.8). I have been able to access the hard drive via target disk mode using the Mini and copy all of the files onto an external drive, which brings me relief that not everything is lost. I tried to boot the drive in startup manager on the Mini to do a Time Machine backup and the Mini didn't even enter startup manager. It just completely ignored the fact that I was pressing the Alt key at startup and proceeded to login normally! I have tried it several times and no dice. I'm feeling frustrated! Argh! Am I doing something wrong? Am I crazy? Anyways...
I bought a refurbished 2012 Macbook Pro and I would like to transfer all of my applications from the 2006 using migration assistant but I've read that some of them might not transfer correctly, such as Adobe CS6 suite and Final Cut Pro X. Unfortunately, I don't have the disks for these applications. Am I totally out of luck or is there a way to do this that I haven't seen yet? I'm willing to try anything at this point. Another question I have is will a Thunderbolt to Firewire adapter work with my 2006 MacBook Pro?
If you have any insights on how to transfer all of my stuff over, I would very much appreciate it. Thank you!

Yep, it was in target disk mode. I don't have a thunderbolt-firewire adapter, but I'm going to get one and try that -- I honestly wasn't sure if it would even work with my older Mac. I ran migration assistant with the Macbook Pro 2006 in target disk mode connected to the 2012 with an ethernet cable and it didn't find the drive.
So there's really no way for me to gather all of the various folders for FCP and put them on the new Mac?

Dvd not playing back on dvd player

hiya,just done a dvd for training at work,it plays fine on computer ,but will not load on dvd player,have used these dual layer discs before so know they are fine.put just a few minutes of data on the disc. thanks in advance for any help

hiya,to be honest im not sure what brand they are,ive used them before and my dvd player works fine with them,i used idvd to burn them like i always do.one point to make,ive put a very little amount of data on the disc ,idvd asked if i still wanted to go ahead and i clicked yes,second point on idvd,in the menu screen,i dragged some content into the section where it will automatically play when disc is inserted,i hope you understand what i mean by that,ive never done that before. third point,the disc plays straight away on my mac and its played on a pc after some kind of formatting by the pc.thanks for your reply earlier,as keen as i am on my mac i dont understand the ins and outs of it,hoping you can help.
cheers phil

Images appear faded when exporting to pdf

Hello, I have .png images in my document; and regardless of the blend space I choose, or pdf export settings, the images appear faded when I export to pdf. I noticed that when I print the file as a pdf, the colors don't change, it only happens when I export, so I'm assuming it's related to pdf export settings? any help would be appreciated. another thing that might be relevant; in the document, when it's just a single image on the page, it doesn't appear faded in the exported pdf. but when there are several images together, overlapping on the page, fading occurs. also, if I select compatibility as acrobat 4, images are not faded in the pdf, although they do appear lower quality. but i can't set compatibility at 4 because i have several movie files and hyperlinks embedded, which 4 doesn't allow. hope i've made sense, i'm new to indesign, using CS3.

Hi Peter, I changed the colorspace in acrobat to the same as indesign, sRGB... + US web coated v2.. then I exported again, but still have faded text in text boxes as well as faded images (.png files). I notice when i zoom in and out quickly, the images flicker a bit and look how they should but when I stop they stay faded. I'm just curious if anyone were to place a .png image in their indesign + export to pdf, whether they'd get the same result.
as far as the monitor goes, to be honest, im not sure if it's calibrated. and i feel bad asking what that means

Regular Expressions Problem!!!!!!!!! Please help!

HI,
I need to extract the lines of a aperticular file without the comments.
I have a code to catch the comments, But don't know how to how to get the lines without the matching comment lines
This is the RegEx to catch the line comments.
((?:/\\*(?:[^*]|(?:\\*+[^*/]))*\\*+/)|(?:--.*))
Eg:
String s = "Something /*rarely*/ usefull";
As an example, I need to extract the "Something usefull" from the above string.
Please Help!!!!!!

UI-ZEIKVK wrote:
Thanks for the quick reply,
The above RegExp matches the comments of multiple lines.
Buth the problem is i need to get the String without that comments.Well see if it was me I wouldn't be looking do this all in one go. Why not strip all the comments first and then get the lines you want? Wouldn't that be easier?
Because to be honest I'm sure one of the regex gods may be able to help you, although I have a feeling it's not possible (he said, casually throwing down the gauntlet) but even if it is. Is it a good idea? Methinks not. I think there are two pieces of business logic you are applying here. 1) removing comments. 2) extracting content you want. Seems to me to be a better idea to keep that as two steps. Then later if, for example, you wanted to get all the numbers you don't have to repeat the hackery of removing all the comments because that piece is encapsulated already by itself quite nicely.

Equium M40X - slow internet dropped packets

I'm using wi-fi and my pc keeps dropping packets every so often (and also does when connected via LAN) making my internet connection a bit slow.
I have had my wifi router changed and it's still doing it.
Thought about upgrading BIOS and wireless driver here but it's too risky, long winded and may not cure it anyway.
My gut feeling is some process is kicking in every so often and slowing things down (my mouse movements sometimes freeze for a few secs).
I have AVG antivirus installed, have run scan and no viruses found.
I've defragged and run registry cleaner.
Any ideas I can try to find what's causing it. cheers

Hi
I dont know if its really a problem!
I use WiFi very often and I have noticed similar issue.
But it depends really from the website and from server which I connect.
However, the WLan driver update should be done at first to check if this could sort the WiFi issue but to be honest Im not sure if this is a WLan problem due to the fact that this also happens while using the LAN.
I think you should check if a Windows updates are possible and available.
If the new BIOS versionis available check if the BIOS update helps.
Using a firewall could have a bad influence on the transmission too!

Using Century Optics 16:9

Hi,
im using a Century Optics 16:9 adaptor. My question is would i edit it using a 16:9 preset or should i use a 16:9 preset in FCE. I started using a 16:9 preset vor importing and exporting but one of the problems i get is that when i adjust a sequence by changing the angle cause by lets say 1, the letter box is no longer even in thé end. As well im not sure if its preferable qualitiywise to use the footage as 16:9 during teh edit process. i intend to put the material afterwards on a DVD so possibly its better to set the material afterwards to 16:9, so simply unsure how to use it during edit and how to export is from FCE (perhaps different codes as well) Using a standard Mini DV, so no HD Camcorder. After the export to tape will be encoded to mpeg2 with a DVD Recorder. Thanks for your help.

yes this is what i did, but to be honest im not sure if its the best way to do it as im getting a crooked picture when i adjust the setting for it, and so the letter box bars are crooked as wel, am i missing something? i also see that in my opinion the picture quality is not perfect, meaning that some horizonatl lines flicker here and there, checked the settings for picture quality (importand export) but they say high, thx

Start / stop recording from other software?

I have a setup where three cameras are supposed to start/stop recording based on user interaction in another software. So, is it possible to trigger a recording to start and stop from another software? If so, how can this be done?

To be honest Im not sure but I dont think so.
If this is a securitycam setup one way to do it without having to have acces to "endles" storage space is to use one of the free services for webcasting like jtv, ustream, veetle, or livestream. I believe all of them have a privace option so you can enter a securitycode so only you can acces the videos. Its not optimal but it gets the job done. I believe some of them will erase videos after a while though if you dont highlight them for saving.

How do I get the groups in my address book to my contact lists in Mail

The groups in my address book are displayed in my contacts list in Mail

Hi. I honestly am not sure how I transferred it (I am dealing with several issues in getting the new iMac set up right now) . . . I think I exported from one and imported to the other. Maybe that is why the notes did not come over even though the contacts did. But I tried your method and it seemed to work so thatnk you very much!

Calculating text fields

Hi folks! I am having a problem with my application which i hope you can help me to solve. Basically my application has 6 textfields were the user enters details about costs. I want to have another textfield (total) below these 6 which will show the total sum of these fields. i.e display the total cost...
This (total) textfield will have to be refreshed after the user enters a value into any of the 6 fields. I would prefer not to have the total value stored in my DB, and for it just to be displayed dynamically within the page.. Is this possible?? I would imagine it will require Triggers and mabey some Javascript??.. to be honest im not sure how to approach this. Has anyone got an example they can post me?
any help very much appreciated,
Roddy

<script language = "JavaScript1.1" type = "text/javascript">
calculateTotal() {
var total = 0;
total = html_GetElement('P6_CAP0708').value + html_GetElement('P6_OP0708').value;
html_GetElement('P6_TOTALAWARDED').value = total;
</script>First of all the function should be defined as function calculateTotal.
Try using the following:
<script language = "JavaScript1.1" type = "text/javascript">
function calculateTotal() {
var total = 0;
total = html_GetElement('P6_CAP0708').value + html_GetElement('P6_OP0708').value;
html_GetElement('P6_TOTALAWARDED').value = total;
</script>
Also call the Javascript function by putting the following in the items HTML Form Element Attrinutes entry :
onBlur="javascript:f_calculateTotal()";
NOTE: You will have to use parseFloat function to convert the strings ino numbers before adding otherwise it will concatenate the 2 values. For eg. Instead of giving 1+2 =2 it will give 1+1 = 11.
Hope this helps
Ameya.

Need some info about getting started with the GE70 2PC Apache

Hi guys!
I'm about to getting the new GE70 2PC Apache gaming notebook from MSI and since I'm really putting alot of money in this I really wanna handle it gently :p So I got some questions about this, since It'll be the first time I'd but a gaming notebook.
1) 1st of all, what do I do when I've first started the laptop? Do I place in the CD and install all the newest drivers from that CD? Afterwards install an anti virus and then I should be good to go?
2) I heard the Haswell i7 processors from Intel produce a hell of a lot heat. When I turn on turbo fan and turbo boost and I reach temperatures of around 90°C, would it harm the hardware of my laptop? Could any damage take place? Or would my processor/graphic card have a shorter life expectancy?
3) The graphic card would be the GTX 850m. Now I'm wondering, is on this particular laptop -> (MSI-ge70-2pc-019be-apache-azerty), is the graphic card the DDR3 version or the GDDR5 version? Because I heard even the GTX 765m can outperform the 850m DDR3. But I also heard that the GDDR5 version of this graphic card is noticeably better than the 765M graphic card.
4)Is it wise to keep the processor going on turbo boost (3,4 Ghz) forever?
5) Will I have internet problems? I heard alot of people having internet problems with the killer lan drivers lately..
6) What laptop do you think I should pick in overall? The 2PC Apache version or the GE70 2OE version (the one without SSD) ?
8) My Brother has the GE70 2OE which has the 765m graphics card, but he only has around 60 fps when he's playing League Of Legends, and LoL isn't the most demanding game right.. The FPS sometimes even drops to 40 (even when he's ALONE with no one around him). It feels like his FPS is capped at 60? Because most of the time it's just 60. But when I look at the settings I saw the FPS is uncapped.. I believe with this graphics card he must atleast achieve a constant 70-80 fps on this game right? Might something be wrong in the settings of the graphics card?
7) Is there anything I should know before I start gaming on this laptop? (something I should do to have best performance or something..?)
Grtz

Well...
1. When you get the laptop, use MSI Burn Recovery and make the backup disks (I prefer DVD's myself...). This way if something happens, you can reinstall all the software like you just bought it.
2. Haswell does produce quite a bit of heat. As long as you don't get much higher than 90C you should be ok. If you're getting into the high 90's or even 100C range, you probably need to replace the heatsink compound. MSI has had a number of issues with that aspect on notebooks. It is easily done though.
3. The only way to really answer that question is probably to contact MSI about it. >>How to contact MSI.<<
4. Turbo boost isn't really user controlled. I wouldn't worry about it.
5. You might have issues. I'm honestly not too sure. I know most people haven't had issues recently, but that's all relative. The drivers seem to be working rather well right now to be honest.
6. Depends what you want and what is available. Maybe the GE70 20E + buy an SSD will be cheaper than just buying the Apache version. I don't really know, but you could always look into it.
8. The 765M is a decent card....but remember, it's NOT the same as a 760 on a desktop. It's roughly equivalent to a 750 in the desktop world. That's not a bad card by any means, but you aren't going to be able to get 60+ FPS at 1920x1080 in many games. LOL is rather demanding as a game though to be perfectly honest. (throwing my personal opinion in on this, I always buy the highest end item I can in this case, because you won't be able to get any better really in the end until the next laptop comes out).
7. I would setup all your games in the NVidia control panel to use the NVidia high performance graphics processor. That way there is no confusion and it will use the right video card.
You don't really need to update drivers UNLESS you're having an issue (like BSoD's or game freezes or something similar).
The MSI customer service in the EU really seems to be hit or miss. Some people seem to get good service, some people get really crappy service. I'm honestly not sure what the problem is over there. =/

Honestly I'm sure...

Similar Messages

Maybe you are looking for