Hoods on LCD monitors?

I'm considering the purchase of an Eizo CE210W LCD Monitor for my G5. They offer a hood for it to block out stray ambient light. Has anyone used one of these hoods and do you find them useful? Any comments about this monitor would be welcome as well.

speedlab,
It is called Ghosting. What happens is the pixels cannot de-energize fast enough when there is fast moving action on the screen. The response times on the pixels is getting better and there are some high end LCDs sutable for gaming but for now, the CRT is King when it comes to gaming.
Take Care,
Richard

Similar Messages

LCD monitor profiling: getting started

I have a cheap LCD monitor (Gem brand) I bought a year or so ago. It works okay for me but i've never calibrated and profiled it. I'd like to finally invest in a calibrator. I'm a click away from ordering the X-Rite EODIS2 Eye-One Display 2 as my quick research (thanks to this forum) says that's a fine choice.
Once I receive it I will take a serious look at my ambient light conditions and try to become comfortable living with less natural light in my workspace. I will also consider constructing a monitor hood.
Meanwhile I'll keep reading Real World Color Management.
Does it sound like i'm on the right track? Any advice / caveats at this stage welcome. Otherwise I'm sure you'll be hearing from me. :) Many thanks.

The saga continues...
I've been watching Chris Murphy's lynda.com 'Color Management Essential Training' videos, which are very good but i'm still not sure I'm doing this properly. Here's the story:
He outlines a test to determine whether your LCD display's backlight is controlled via the Brightness or Contrast on-screen control: fill a new Photoshop file with black, and adjust each control independently to determine which shows a visible change in the solid black. After resetting my monitor to defaults, and trying this, it was obvious that the Contrast control was linked to the backlight.
Murphy then demonstrates profiling, using the same Eye-One Match software. He skips the 'Set the Contrast' portion in the software, as that relies on adjusting the Contrast control to adjust backlight. I did do it, because my monitor backlight does appear to be controlled by Contrast.
Next is the 'Set the White Point' portion, which involves adjusting RGB values separately. Chris says it's not a good idea for non-high-end LCDs -- that it's better for white point adjustment to occur in the video card LUT. So he skips that portion, and -- although my monitor does allow such independent adjustment -- i skip it as well.
Then it's 'Set the Luminance', where we use the Brightness control. In Chris' case he's adjusting the backlight. In my case, uh, I dunno what I'm adjusting exactly. Anyway, I can't get the current marker all the way down to the target value. With Brightness at 0, it's slightly above my target 90. (I wonder if this means my monitor is burning out, or it's an indicator I should have done the RBG adjustment stage?) But Chris encourages staying slightly above the target so there's a little room to come down later. I settle at 92.6.
Then calibration, correction curve, RGB->XYZ, and a display profile is born!
I learned from Chris that Eye-One Match includes a Monitor Validator feature. I do it and find my DE2000 is 2.56! Seems quite high. (Chris' was 0.78.) Does it mean my monitor just sucks, or is it an acceptable value, or is there something I need to adjust?
In other news, blinds are more closed (except for one window -- this room has lots of 'em), room is darker, I shall start wearing black. :)
Thanks for any perspective on any of this.

Connecting 2 LCD monitors to my Macbook?

Hello Everyone.
Ok, before I go poking around and stuff something up, can someone please answer my following questions. I am wanting to connect two LCD 22inch monitors to my Macbook Pro.
1. How do I do this?
2. Instead of buying Apple screens, are there any other good LCD monitors that will do just a good a job?
Please help.
Thanks....I love my MAC

1. http://www.matrox.com/graphics/en/corpo/products/home.php
check graphic expansion modules
2. for serious work I would strongly recommend eizo monitors. current apple displays simply cant compete with them. They are very outdated and therefore overpriced. they have poor adjusting possibilities..in both picture and stands.
tutmir

I just bought a recertified Mac Mini, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.

I just bought a recertified Mac Mini core duo - it's not the newer model-, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it and using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.
The company I bought it from is not Apple, and I may regret that. It was in my price range, though.
This is the first time I've used this community, and I've been a Mac owner since 2000. Thanks in advance!

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

LCD Monitor with B&W G3 Tower

Hello, I am looking to replace my 17" Apple Studio Display CRT on my G3 B&W Tower with an LCD monitor. My questions are: 1) Will my computer (VGA port) accept any current LCD screens on the market, or do I have to stay with Apple's LCD monitors? 2) There are several Apple Studio LCD Displays offered on eBay. They mention DVI and ADC connections. How do I know which models will work with my B&W G3? Forgot to mention that I have upgraded the processor with a Sonnet G4 500Mhz. Thanks.

Hi,
your B&W (like mine) should be equipped with a standard VGA output on your video card, which should accept any monitor with a VGA connection.
I tried a couple of LCD (a Samsung and a Hewlett Packard) which worked flawlessly and did not give me any problems.
I am not sure whether you can connect any of the current generation Apple flat screens due to the different interface, but you surely can take advantage of any VGA equipped LCD.
cheers

Two 24" LCD Monitors with FCP / Motion

I have a Mac Pro (early 2009) with the new ATI Radeon 4890 dual DVI video card and one Apple 24" LCD monitor. I'm using this setup for primarily FCP/Motion work. Question:
- Can the ATI Radeon 4890 handle two 24" LCD monitors, or do I need to purchase a second video card?
- Can FCP / Motion handle two video cards?
Thanks!
lance

Can the ATI Radeon 4890 handle two 24" LCD monitors
ABSOLUTELY. There are two monitor connections on the card. One DVI, the other the Apple connector.
Can FCP / Motion handle two video cards?
Yup. Most FCP workstations I have been on, and personally own, are two monitor setups. That is a fairly typical setup.
Shane

External 1920 x 900 LCD Monitor on MBP

I am wondering if I connect an LCD monitor that has a 1920x900 native resolution, if I can get that resolution when it is connected to my MBP?

Yes. The MacBook's video card can drive an external monitor up to 2560x1600.

Hyundai LCD monitor won't work with OS9

New Hyundai LCD monitor -dual input. Works fine with Windows XP, & with OS 10 but when I boot into OS9 the screen goes black, & the screen's menu button won't work. Have started os9 in safe mode but cannot find how to change the display/resolution/refresh settings. Where do I look to change these settings? And what settings should I try?

Have posted more on this in thread in "older hardware".
http://discussions.apple.com/thread.jspa?messageID=6115403#6115403. I hope this is the right link, thought I shouldn't duplicate postings.
Would very much welcome any more suggestions you might have
It's ATY rage 128 pro, VRAM 16MB
1024x768@60HZ, 32 bit colour

32" LCD Monitor - Best Resolution???

Hello all -
I just bought an Olevia LT32HVE LCD monitor to use with my G5. I'm wanting to find the best resolution setting so that it won't be horizontally whacky, yet still a good amount of real estate on the screen. At the recommendation of a friend who has a 42" monitor, I downloaded Display ConfigX so that I could change the default settings. After registering and installing, I changed the resolution from 1280x1024 to 1280x720 as my friend suggested. The resolution now LOOKs OK, but it's a bit large for my taste. I'd like to get a bit more real estate on the screen by making the overall image more condensed. The LCD manual says that it's highest resolution is 1366x768, but when I tried that, the monitor blanks out (to blue) and says the rate is not supported. Probably has something to do with the refresh rate as well? I then have to hook up a second monitor just to get the large one to come back (viewing-wise).
Any suggestions on some resolutions that this LCD monitor will be able to use? Or am I missing a key factor?
Thanks -
G5 Dual 2.0Gig Mac OS X (10.3.9)

I was able to get the monitor to work at 1360x768 @ 60hz, but it looked a little rough around edges. Looks better at 1280x720 in terms of clarity and sharpness. But it's still the exact same size (at least, viewing-wise) as 1280x720.
Is there any way to get more real estate happening? Even though it's not horizontally crazy now, it's overall still very large.
Thanks -

DVI.I to VGA LCD monitor

Hi Everyone
Is there anything to gain by using the DVI connection on my MSI FX5900XT graphics card
to the VGA port on a DELL 19" LCD Monitor ?
I was just wondering as the card came with an adaptor DVI/VGA so I can use either output on the card.
At the moment I am connected VGA to VGA
cheers
riggie

Apple didn't ship a 2.4GHz MacBook until February of 2008. If that's the model you have, or an earlier model, it has a mini-DVI port which would take the mini-DVI to VGA adapter. To confirm, run System Profiler, click on the Hardware heading at the very top of the left-side list, and tell us what the Model Identifier reports.
Regards.

External LCD Monitor Connection - Unacceptable Quality

Hello,
I have recently purchased a Mac, hoping that I would be able to connect to my external LCD monitor (19" Samsung SyncMaster 920NW - only VGA connection).
I have easily hooked up my monitor to my Mac. However, what I see is of unacceptable quality. When compared to Macbook display, the display on the external monitor is darker and the text looks horrible. I have played with few settings but nothing good.
I have read other threads where people complain about similar things. But, I thought Samsung's monitors would be of higher quality. Mine is a relatively cheap LCD but not this cheap
I am just willing to confirm that I am not missing anything. I simply can't believe that the display quality could be this bad. In the worst case, I will have to buy a new LCD.
Many thanks in advance.

Hello stedman1,
Thank you for your quick reply.
Unfortunately, it is not running in the Mirror mode. The display with the mirror mode was even worse! But after reading the posts in the forum, I have learned how to change it to the extended display. It is better than the mirror mode, but still not good enough.
Maybe I am making a mistake comparing the external monitor with the MacBook's monitor?? There is a huge gap between the two. It is a lot darker, and the text quality is way worse.
Someone with a similar monitor having solved this issues?
Thanks,
Guven.

What connects do I need to hook up a 2nd LCD monitor to my p7-1380t HP computer?

My current monitor is a Samsung Starlight LCD monitor hooked up to my p7--1380t (approx 23 inches). I want to set up a 2nd monitor which is a DELL LCD (unable to find monitor model #).
Can you advise me which ports to use on the back of my computer and which cable type I should get for the Dell monitor?

Okrafarmboy, welcome to the forum.
We don't have information on Dell monitors. However, I believe that it will be either VGA or DVI (D or I). It depends on the age of the monitor.
Here is a guide to help you connect the two monitors to the computer.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

New LCD Monitor Blinks On and Off

I just purchased a new 22" Visionmaster LCD monitor, connected via digital cable to my ATI Radeon 128Mb video card.
However, it tends to switch OFF to a black screen, and after about 5 seconds it comes back on. The screen displays the word DIGITAL in the upper right hand corner.
Why is this happening, and what can I do to avoid it?
It doesn't seem to like using the digital cable. It works fine using the standard VGA cable, however.
Can anyone comment on this? Is this particular card not compatible?
Thanks!

Hello! Look in your system prefs under the screen saver and see if a "hot corner" is set. It sounds like the mouse is trying to trigger a screen saver or the "display slep" is set to only a few seconds. I've seen this type of behavior with my Dell screen and it's something I'm triggering with the mouse. Tom

A1081 Cinema Display LCD Monitor compatibility

I am about to buy a reconditioned A1081 Cinema Display LCD Monitor 20"? But i need to know if it will work with my MacBook Pro 10.5.8 and my ipad 2? As i am buying it to use at an exhibition. iIf so what adaptor will i need to hook both of these up? Thank you in advance.

Are you sure the monitor is set to receive input over the VGA input? Have you tried the DVI input on the monitor? You may have better luck with DVI.

Sharing a DVI LCD monitor between a MDD & AGP Macs, recommendations?

Hi all,
In the not so near future, I'm looking to share a large(42) LCD monitor with DVI ports between my MDD and AGP Macs. My AGP Mac has the Geforce nividia 4600,64MB video card and the MDD has the ATI 9000PRO, 64mb video card via a dvi switch box.
Any recommendations on a LCD monitor that will give excellent quality? Also, will I see a big difference if I were to upgrade my video cards to 128MB or higher?
thanks, web dude

I have the slightly larger VX2235wm which is 22 inches, and the same video card as you on my MDD. I am satisfied with its performance.
The monitor has separate VGA and DVI input ports. The max widescreen res on my MDD is 1680x1050. I usually run at 1440x900 because my eyes aren't what they once were.
I've gotten higher resolution on the same monitor by connecting it to my MacBook Pro via DVI. Can't remember what the numbers are exactly but I know it's larger than the 1680x1050 on my MDD. The notebook has a newer graphics chipset and 128MB VRAM, so that's not a surprise.
As an aside, I played with both the VGA and the DVI sides of the monitor. I found I have more options for smaller resolutions if I use the DVI-to-VGA adaptor that came with the MDD and connect to the VGA side of the Viewsonic.. I keep the DVI cable attached but tangling over the back of the desk so I don't have to rummage so much when I need to connect the MacBook Pro. It works fine on the DVI cable. As long as I turn off the MDD before connecting the cable, leaving both lines running to the monitor has caused no problems.

Hoods on LCD monitors?

Similar Messages

Maybe you are looking for