Hook printer to airport

I would like help connecting a HP Deskjet 3054 printer to my Airport via USB so I can print from my MacBook Air.

What portion of this exactly do you need help with?
It's a fairly straightforward process, so long as the printer has drivers/software compatible with the OS that you are running.
Follow these steps and then let me know if there is anything else you need help with:
- Go to the HP support/download page and download/install the drivers/software for the specific printer/OS
- Plug the printer in to the USB port on the Airport
- Open the Airport Utility from your Apps/Utilities folder or from the Launchpad on Lion
- Select and Open the Airport that you are using from the column on the left
- Go to the Printers tab and select the printer that you wish to use
- Last step is to add the printer to your Mac from the Print & Scan portion of System Preferences
Cheers!

Similar Messages

Printer hooked up to Airport

I've had this problem ever since I loaded Leopard, but not sure it's related.
I have a Canon MP800 printer hooked up to Airport and never have had a problem, but all of a sudden, I can't print to the printer unless I unhook it from the base station and plug it directly into my laptop.
When I try to print, it tells me to check and see if I have the printer properly plugged in etc and it won't show up in my Printer & Faxes window when I try to add a printer; yet when I plug it in directly to the laptop, no problems finding it or using it. Any suggestions?

problem resolved by resetting settings somehow.

Canon MX920 not responding when hooked up over wifi as WPS printer on Airport Extreme, any ideas?

Canon MX920 not responding when hooked up over wifi as WPS printer on Airport Extreme, any ideas?

Ping the IP address of the printer.
If you are doing this from windows, have you installed the airport utility for windows?

HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

Product Name and Number: HP Deskjet 3550 Inkjet Printer
Operating System installed: Windows 7 Home Premium 64 bits
Error message: None
Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
https://discussions.apple.com/community/wireless/airport
Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

UPDATE!
Problem solved! So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well. So, we can call off the technoid hounds. Everything running perfectly.
I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper. And just to recap those important Windows printer settings, they are:
* [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
* [Configure Port] IP Address "10.0.1.1" and Port "9100"
Best of luck!
Bilgey

Leopard incapable of printing via airport?

What the heck did apple do to screw up wireless printing?
I could print on Panther os to my printer when it was hooked up to airport. It meant hooking it up to airport and adding the printer a second time (then labelling it as wireless so I know which is which). How do you do that in leopard?
Leopard says the printer is there but lies when it comes time to print and says it can't connect unless i plug into usb port. why can't it print when the printer is hooked to airport?
How do you get this wireless printing to work on Leopard?
The normal printer utility doesn't exist and I have no idea on how to tell leopard to print via airport to the printer (leopard is too stupid to figure it out) and apple won't let me ask anymore.
HELP HELP HELP! HOW DO I GET THIS STUPID LEOPARD OS TO PRINT TO IT?

OK. Here's the answer to my own question. And here is what apple did to confuse the issue.
First, you have to go to the airport utility to fix leopard so it finds the usb printer plugged into the airport usb port because it has to configure the wan port as a printer.
In utilities, click on airport utility.
(this is when airport utility suddenly realized it had to update itself). Why the update was never found using software update I'll never know....
Complete the update. Exit airport utility and relaunch so that it detects the previous airport setup.
IT SHOULD LIST WHAT IT FOUND. AT THE BOTTOM OF THE WINDOW IS A CLICK BUTTON LABELLED MANUAL SETUP. CLICK ON MANUAL SETUP. Why apple thought to hide the printer setup in airport manual setup is anyone's guess....
IN THE MENU THERE IS A PRINTER ICON AT THE TOP OF THE SCREEN. CLICK THAT AND THE REST IS EASY. IT SHOULD FIND THE PRINTER SO ADD IT AND RENAME IT BY ADDING BONJOUR OR SOMETHING TO THE NAME SO THAT YOU KNOW THAT YOU ARE SELECTING THE PRINTER WHEN IT IS PLUGGED INTO THE AIRPORT BASE STATION. Set sharing if you want to share the printer in system preferences sharing icon. RENAME THE NEW PRINTER OTHERWISE, YOU'LL HAVE TWO PRINTERS, ONE THE COMPUTER LOOKS FOR ON THE USB PORT AND ONE IT LOOKS FOR THE ON AIRPORT BASE STATION.
SET THE DEFAULT PRINTER TO THIS NEW PRINTER SO YOU DON'T HAVE TO WORRY IT WILL PRINT VIA AIRPORT TO THE PRINTER.
Panther was so much easier and logical in setting up the printer to run off airport.

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

Wireless printing with airport extreme and uverse modem

Hi,
I'm trying to hook up an airport express so that my PC Windows 7 and Mac Mini mid 2011 can print to both of my laser printers.
The dell is network attached and the oki is network attached as well as usb attached directly to the express.
Both systems see the printers but when i send a print job from the MAC it just errors out. If i send it from the pc like normal then it still works ok.
I also can't see either printer from my iPad 2 running iOS 5.0.1
Right now I'm running a UVerse 3800 router/modem and i have the airport express ethernet connected to one of the lan ports of the uverse router.
All printer drivers are current as well as the MAC software.
Help

The dell is network attached and the oki is network attached as well as usb attached directly to the express.
If both printers are Network-Ready, then there is no need to connect either to the AirPort Express Base Station (AX) by USB. Being Network-Ready, these printers have their own built-in print servers which should be controllable by their front-panel interface and/or via a web-based interface.
I also can't see either printer from my iPad 2 running iOS 5.0.1
Unless both printers are AirPrint-enabled, no iOS device will be able to print to them directly.

Appletalk laserwriter won't print over airport wireless. please help.

i have an old apple personal laserwriter 320 which prints plug and play to my G5 (10.4.4) connecting ethernet (appletalk on) with asantetalk adapter. no problems at all.
i like to share this printer wirelessly by connecting it an airport express base station.
i cannot get my network of powerbook and G5 (all 10.4.4) to print to it, they cannot see it.
1. can it be used wirelessly with the airport express base station?
2. what about airport extreme base station?
3.i turned on appletalk in airport under network settings. how about under airport admin utilities?
i must be setting the network configurations wrong, or is it appletalk or the asantetalk ethernet adapter?
can someone please help me through this setup?

Well, I use an HP-6MP with an AsanteTalk hooked to an Airport Extreme Base Station and I use Tiger 10.4.4 and everything works fine. My wife's dual USB iBook, circa 2001, with an internal airport card, uses the HP printer with no problems. The same setup works with OS 9 too.
I also have an Airport Express hooked up to my livingroom stereo that I use with both iTunes and AirFoil. I've never tried using the Airport Express with the AsanteTalk, but I can't imagine that it wouldn't work since it works with the AEBS.
The startup routine is touchy, the printer has to be allowed to fully complete its warmup cycle before powering up the AsanteTalk. Try disconnecting the power to the AsanteTalk for about 10 seconds while everything else is hooked and powered up, then reconnect the power, the lights should flash on the AsanteTalk, then open the Printer Setup Utility, wait about 10 seconds and the printer should then appear, if it isn't there already. When we have power outages from say thunderstorms, I often have to recycle the AsanteTalk's power because when the power comes back on, it completes it startup cycle before the HP does and printer setting disappears.
It's not a matter of adding AppleTalk to the AEBS or Airport Express. There are no options for that. The settings are only in the computer network/airport settings. Both of your computers need to be configured to have AppleTalk active under the Airport network settings.
And as mentioned before, don't use the yellow ethernet cord.

How to connect my iPad, Brother printer, and AirPort Extreme?

How to connect my iPad, Brother printer, and AirPort Extreme?

I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

USB printer on Airport Express via Bonjour: print queue no longer works

This is a variation of similar postings on this forum, but hopefully provides more information to allow others to pinpoint the problem.
Have been using Intel iMac 10.4.8 now upgraded to 10.4.10. Two printers attached: 1 via USB and a 2nd via USB/Bonjour on Airport Express. Both working flawlessly. 2 days ago, an ADSL Internet outage occurred. When this was reestablished an hour or so later, everything was back to normal, EXCEPT that the USB/Bonjour/Airport printer no longer works. When jobs are sent to it, the printer queue stops and a red "!" appears in the dock on the queue. Restarting the queue just brings back the red "!" again.
Have done all the usual things:
1. Checked cables, restarted iMac, restarted printer, reset Airport.
2. Have confirmed the printer works find if moved to a direct USB port. So the problem is not the printer.
3. Have upgraded the Airport firmware to 6.3. Works just fine as a network access point. So the problem is not the Airport itself.
4. Have deleted, added the printer, renamed the printer - none of these things helped (this was suggested by some postings on the forum)
5. Have tried every combination of which item is powered up first (this was suggested by some postings on this forum)
Have confirmed (by checking CUPS Error Log, as well as by Internet Connection Diagnostics) that the problem is that the iMac can no longer connect to the printer when printing on the local host if it is connected via USB/Bonjour/Airport. However, it can find the printer for adding a printer during setup. So Bonjour is working, but the printing is not.
There are lots of similar postings of people having problems with printers previously working, but then stopping working on an Airport Expresss/Extreme. I hope the above scenario, which is a very simple network topology, and the fact that the iMac and printer and Airport all work correctly on their own, is of help. It does look as if the problem is in the Airport Extreme, and was triggered by the WAN outage, and not fixed by printer reinstallation or firmware upgrade.
Looking forward to someone with a clever suggestion...
LeslieB

What did you use to discover the printers on both Mac and PC. Did you use Bonjour for both?

Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

How can i hook up my airport to my play station 3?

how can i hook up my airport to my play station 3?

Sorry, there are two versions of the 802.11n AirPort Express. The older version has a single Ethernet port; the newer one has two. Which do you have? Is your goal to connect the PS3 to the Express by wire or wireless?
Regardless of model, if you plan on connecting the PS3 by wireless, then please check out the following PS3 Support article for details on how to do so.

Tiger on iNtel iMac "Printing" over Airport to HP 2100M

Nice new iNtel iMac 2GHz running Airport Extreme can't print via Airport to a networked HP 2100M. The HP has an EIO card and it's connected to the LAN by that cable.
I have an old iMac that's hardwired to an ethernet hub that's being driven by the AEB and the HP 2100M is also connected to that hub.
The old iMac sees the printer and prints just fine.
The new Intel iMac doesn't see the HP over Appletalk and I'm not able to figure out how to setup the new iMac to print via Airport using the IP address of the HP printer.
Any help would be appreciated.
Here's a 30,000 ft level view of my LAN:
Internet Cloud =>Comcast Cable ISP =>Cable Router
AEB =>Linksys Ethernet Hub
•iMac 350MHz (don't laugh. She's still a beauty) OSX 10.2.8
•HP 2100M with Network EIO card
iNtel iMac (sees the Internet just fine via AEB, but can't see the printer for patootie!)
iNtel iMac 2GHz Mac OS X (10.4.5) HP 2100M with EIO network card, AEB LAN,

Unfortunately, that didn't work. I power cycled the cable modem, AEB, router hub, and the printer and the iMac still can't "see" the printer.
I've looked at the Airport discussions and this problem is a larger issue than the iNtel iMacs. It sounds like it's probably an AEB issue.
I'm running the latest firmware to no avail. It almost sounds to me in the Apple literature that they only support USB printing through Airport. This would be a serious blunder as the business world relies more on networked server based laserwriters than USB dot matrix printers.

Hook printer to airport

Similar Messages

Maybe you are looking for