Hook up 2 w2007 to laptop

I have a new laptop and want to hook up 2 HP w2007 monitors.  My laptop has 1 VGA connector.

Hello TomMash,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are looking to connect two monitors to your notebook, and I would be happy to assist you in this matter! 
In order to configure your two monitors to your computer, I recommend following this document on Using Two or More Monitors with One Computer (Windows 8). This resource will demonstrate how to connect and configure your displays to your computer.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • I had a iPod befor it was on my moms laptop and know I got a iPhone and my own laptop how do I get my iTunes account on my laptop so I can hook my phone to my laptop on the same account as my iPod

    I had a iPod befor it was on my moms laptop and know I got a iPhone and my own laptop how do I get my iTunes account on my laptop so I can hook my phone to my laptop on the same account as my iPod

    Welcome to the Apple Community.
    You first need to sign into the account in iTunes on your laptop, then you need to transfer the content from your moms laptop and import it into iTunes on yours. You can do this in a number of ways, either over a network, with an external drive, or even a USB stick.
    If you go to iTunes preferences > advanced on your moms laptop, it will tell you where the original files can be found.

  • My screen is frozen after I hooked it up on my laptop for synching and this window appeared asking to have the ipod updated. Now it won't do anything.

    My screen is frozen after I hooked it up to my laptop for synching and this window appeard asking for update. Now it won't do anything.

    Have you tried a hard reset yet to see if that makes a difference?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.  This may take a couple of tries.
    B-rock

  • My ipod is about 6 years old. I recently hooked it uo to my laptop and can sync my music but not my playlists

    My ipod is about 6 years old. I recently hooked it up to my laptop and downloaded ITunes. I can sync my music but not my playlists in ITunes. My ipod is a classic 30GB ipod

    One common cause of this is interference...try searching for other WiFi networks near you, see what channels they are using. Most folks just turn on their routers & the default channel is usually channel 1. You can try changing channels, with 1, 6 or 11 being the best, but find a channel that no network near you is using. See if that fixes things.

  • I just bought my ipod and hooked it up to my laptop, and i clicked restore files, but my ipod wont turn on or off

    i just bought my ipod and hooked it up to my laptop, and i clicked restore files, but my ipod wont turn on or off

    Try here:
    iOS: Not responding or does not turn on
    Is the iPod on or off?
    Did it work before you tried a restore?

  • Regarding hooking up a printer to laptop

    I just purchased a compaq laptop model # co61-42ous  and i want to hook it up to my older all in one printer office jet t-45 how do i do this

    Hi,
    Click the ePrint button (the button (between the Wireless and the Question Mark button on the right) and follow the steps to enable Web Services.
    Within several minutes the information sheet should be printed along with the Claim Code.
    If the Web Services were already enabled, click on Print Information Sheet to get the report.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Hooked Photosmart 2575 wifi for laptop with windows 7. downloaded the drivers for it.

    I am trying to" hook"  my laptop to my printer via netgear.,  I have a desktop that is hard wired to it and I have the printer wired to the netgear as well.  I have down loaded the drivers for the printer from the HP site.  My laptop recognizes it (I think) but can't get anything to print. My old desktop is Windows XP and my laptop is Windows 7.  Thanks for any help. 

    Is the desktop working with this printer?
    Do you receive any error messages?  If so, what are they?
    Is there any third party firewalls installed?
    Did the installation complete successfully?
    Go to Devices and Printers int he Windows 7 system.  Does the printer show as greyed out or solid color with a check mark?
    Try using the print and scan doctor.  Did it show any errors?  If so, it should either correct them or provide more information about the issue.  The web page for the tool lists how to use it and what it should do.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Wife just got a iPod Nano...I already have my iPod Classic set up to iTunes on my laptop..Can I hook hers up to my laptop without anything happening?

    Wife just got an iPod Nano...I already have my iPod Classic set to my iTunes account on my laptop... Can I connect her Nano to my laptop without anything happening?

    You should be able to, I mean I have a iPod Touch 5th Genertion, and a iPod Nano 5th generation. Works perfectly fine for me for the both of them, it should for you.

  • On my Ipod front screen it has itunes on top and the white cord on bottom and when i hook it up to my laptop it says on itunes that it is locked???? i think it frozen i dont no

    plzz help me

    You are in a recovery mode follow this article http://support.apple.com/kb/HT1808
    If you have a backup you can restore your contents by following this article
    http://support.apple.com/kb/HT1414
    Is it asking for the 4 digit passcode for the ipod or the passcode for encrytion? If you can get to summary on itunes see if the encryption box is checked.

  • Products available to hook-up an my HP laptop to a recently purchased printer?

    I recently bought a [HP Officejet 5610 All-in-One (product #= SDGOB-0505)] from a friend & was having trouble connecting it to my Notebook PC [HP G62-435DX/Turion II] due to the fact, I have never seen the type USB in-let on the back of the printer. Also my PC was only customized with ethernet, 3 USB and HDMI ports. I am trying to locate a 2 ended USB cord to accommodate the printer and the PC but am having no luck. Any help would be appreciated...

    http://www.ebay.com/itm/3-10FT-3M-PRINTER-CABLE-B-​USB-HP-DELL-BROTHER-/200640876589?pt=LH_DefaultDom​...
    Something like is is probably what you need.
    Dave
    Did someone help you? Pay it forward. Help someone else.
    NC4400, TC4400 Win 7 Ultimate, xp pro, both dual boot
    a bunch of thinkpads

  • How to hook my camera to my laptop?

    I got Sony HDV 1080i and i tried to feed the 'easy setup' on my fcp but it wont show the picture. I struggled with it for an hour! please help me!

    Hello,
    You might want to give a brief report as to how you did finally accomplished the fix. It might
    help one of the other new comers in the future.
    Also award the points and marked solved to the people that tried to help you.
    This site has many generous pros that offer good help to those of us less experienced.
    Tom

  • Can't hook up kobo to my laptop

    Bought a kobo arc so my Mother-in-law can read books.  Plug it into my MacBook Pro and the computer doesn't recognize the device. Tried downloading Caliber and the android transfer program but neither of them see the device either.

    Which product? CS5 what? CS4 what?
    m.v.fiz wrote:
    I have an upgraded version of CS5 on my iMac desktop. Used the CS5 disk to install on my new Mac Book Pro but got a message saying it couldn't be installed because it's an upgrade and there is no CS 4 on the computer.
    In that case, all you need to do is enter your CS4 serial no when prompted (to show you're eligible to install the CS5 upgrade on a computer with no prior versions installed) and the CS5 installer will continue.

  • HT4527 I transfered my Itunes information using a thumb drive to my new computer and downloaded the newest version of itunes to my new laptop. My songs are all there on the new computer but it won't recognize my ipod and sync.

    I transfered my I tunes library to my new laptop using a thumb drive. I downloaded the newest version of Itunes to my new computer. My old ITUNES library of songs and books came across just fine. I can play them on the new laptop but they won't sync with my Ipod. The Itunes shows no devices when I hook it up to the laptop. Windows recognizes that the IPOD is hooked up. But no connection with ITUNES. Did I make a mistake in trying to sync my Itunes purchases to the new laptop before transfering the old library into the new ITUNES. If so how do I undo the problem.  Please help.  I use a PC with Windows XP.

    Hi Rob,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best Regards,
    Jeremy

  • My Second Generation iPod Nano isn't recognized by my Toshiba Laptop

    Hello,
    I have a problem and I was hoping someone on here would be able to help me.
    A couple of weeks ago I have bought a new Second Generation silver coloured 2GB iPod Nano. I have tried to hook it up with my Toshiba Sattelite A100 PSAA9 laptop without having iTunes installed, but while having Quicktime installed. My laptop gave the message 'new hardware detected, iPod', but then started the wizard 'New hardware detected' and searched for a driver, which it couldn't find. I disconnected the iPod and installed iTunes and tried to connect again.. Same result.
    I have tried hooking up the iPod with a different computer that has iTunes installed and it works perfectly on there. I have also tried hooking it up with another laptop without having iTunes installed and that laptop recognizes the iPod immediately and requests to download iTunes.
    I have tried uninstalling and reinstalling all Apple software multiple times, using a register cleaner to make sure all Apple software is indeed gone. Next to that I have tried all the suggestions on the Apple problem shooting pages, such as resetting my iPod or even putting it in storage mode, but it won't be recognised by my laptop. I have also tried the special tips for Toshiba users, but that wouldn't help either. I have no idea what to do any more. I could really use some help.
    Thanks in advance,
    Sanne

    Hi MartyP680, 
    Thank you for visiting Apple Support Communities. 
    It appears that you're receiving a message that your iPod nano can't be identified properly, and you've already tried removing and reinstalling iTunes. You've also isolated this behavior to only one of your PCs. 
    If the issue persists, there are some additional tips in this article that may help, including verifying that the Apple Mobile Device Support service installed properly and is running:
    iPod nano: Error message saying that iPod could not be identified properly - Apple Support
    The "Learn More" section also mentions some other potentially conflicting software to look for on your PC. 
    Best Regards,
    Jeremy 

  • Laptop up to tv using dmi cables, why is there no picture or sound?

    I bought an HDMI to DVI video adapter, cause I alreay had the DMI cable, and I hooked it up to my laptop and all that shows up on my tv screen is my laptops wallpaper. No icons, nothing. I wanted to watch something using VLC (or any other video player) but nothing is happening.
    What do I do to make it work? Like specific steps please.
    Thanks for the help!

    Hi: Glad that it made sense. You are correct the HDMI cable will normally carry an audio signal, unfortunately the DVI cable doesn't. You'll need a separate cable from the Line-Out/Headphone jack on your MacBook Pro to the appropriate jack on your TV.
    Enjoy
    Stedman

Maybe you are looking for

  • Select query join problem

    hey guys, i've used a select query to get details from KNA1, KNVV, ADRC, KNVP, pa0002. tables by joining. but i'm getting only about 170 records. there are more than 3000 records in the database. for each tables. here is my select query SELECT KNA1KU

  • Writing to socket with setinterval not working in windows

    Hello Everyone, I'm trying to stream a big file to my server, and was using 'setInterval' just fine to slowly upload it from OS X, but when I moved my AIR application to a Windows Vista computer, it no longer worked. I started doing some investigatio

  • SAP Management Console : Error : MMC cannot open the file

    We are installing the xmii system on a server, it was not installed completely. Now we have deleted the xMII folders from Add and Remove in Control Panel. After deleting these folders, when we are opening SAP Management Console, it is giving one <b>E

  • JDeveloper was unable to determine the HTTP port number

    Hi, I am trying to deploy my application from Jdeveloper(9.03) to Oracle Application server(9i). Both the servers are running on the same machine.[oc4j is running] When I deploy my applicaion (web war), I am getting the following error: "http://Anil:

  • Basic Programming Problem

     Hi Guys, I need some help. I want to increase and then decrease a number continuously. for example: 0,1,2,3,4.....179,180, 179, 178,...3,2,1,0,1,2,3....179,180, etc.. Any ideas?? Regards! Sam Solved! Go to Solution.