Hook up my Epsom printer

I'm having trouble with hooking up my. New printer its a Epsom and it suppose to be capable but I'm not sure how to hook it up

What model Epson printer is it, what type of WiFi router do you have and what problems are you having in hooking it up?

Similar Messages

  • When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

    When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem?  My printer does not have on-board Wi-Fi but, otherwise, works fine.  I shouldn't have to buy a new one.  Is there a OS patch out there that would open the printer port for my PC computers?

    I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected?  That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
    How is your network configured?  Bonjour as a protocol will NOT cross a router boundary.  If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
    You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router.  If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation.  The additional routers must be put into bridge mode, which is done differently depending on the router.  But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
    Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

  • HT1515 can i hook up a ethernet printer and a usb printer to the same airport express

    I want to hook up an ethernet printer and a usb printer to an airport express? Is this possible and how should I set up the airport express?

    I have an Airport Extreme, 5th generation, that is hooked to the internet and is the source of my home network. I am replacing an old AXs 801.11g with an 801.11n unit. The need to run a printer on the USB port is because it is an old HP 7400 all in one with a wireless g card. I want to set the network up for all wireless N and 5 Ghz for hopefully faster network speed. It is my understanding that if the network is set that way, the wireless g printer will not be recognized on the network. Since I currently am running a ethernet only Xerox Laser on the ethernet port, I would need to hook the HP using USB inorder to keep it on the network for scanning and such. Thanks to you and your information, I think I have the bases covered. If there is a best way to set up the AXs, or if I am missing something more, I thank you in advance and look forward to your assistance.
    Thanks

  • Downloaded Epsom printer app need help to set printer up on iPad 3

    Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

    It's Epson, not epsom.  Epsom refers to epsom salt (magnesium sulfate).
    ... Anyway, iPads don't have printers directly set up.  You might interface with a printer over a WiFi.  That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
    If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

  • I have an I pad 2and have an Epsom printer I have printed things off before but since changing my room around and turning off my printer I have trouble connecting to wi fi again my printer cannot recognise the printer again help please

    I have an I pad2 and an Epsom printer I have printed off things before on my printer but since moving it and having to switching it off my printer will not recognise my I pad I have tried putting in my security key but half way through doing this the message comes on to the error message saying printer recognised but I cannot get it to print help please

    I have done this but it still didnt work but thanks

  • My Epsom Printer/Scanner not working since upgrading to Maverick,??

    We have an fairly recent Epsom SX959WD scanner/printer, which was working fine until I upgraded our MAC Mini. OS to Maverick.
    I did all the further software updates that popped up after installing Maverick, so I'm at a loss as to how to fix it & we really need to use it
    Can anyone help please ???

    Try resetting the printing system:

  • Hooking up to a printer...

    Hey guys. I'm trying to hook up my ne Black Macbook to an HP printer connected to my dad's old Gateway computer. How do i connect to his network or to the printer?
    I've tried it several ways and I just haven't gotten it to work yet...
    Please help...

    Ok. So I did all of that and i tried to print something...
    the first page of the print job just said this at the top...
    %!PS-Adobe-3.0
    %RBINumCopies: 1
    %%Pages: (atend)
    %APLDSCEncoding: UTF8
    %%Title: (n
    Did i inadvertantly skip a step or what? after it prints that at the top of the page it just shoots out blank pages...

  • Hooking up a Lexmark printer through a 'windows' network

    I am trying to print from my eMac which is hooked up to a network, which is set through a windows computer. The printer is hooked up to the windows computer as well and I am lost, any help out there?
    emac   Mac OS X (10.4.7)  

    Thank you so much for your help, I followed the steps and had NO problems. What a huge relief and time saver that will be for me. Thanks again!!
    Matt Froese

  • Hooking up to Brother printer wirelessly

    I just purchased a Brother All-in-One printer that is supposed to be able to be hooked up to wirelessly.  I've input the IP address and followed the instructions on the set-up CD but it still isn't connecting wirelessly.  Can anyone give me any suggestions???

    By the way - follow the CD instructions exactly. A lot of problems occur because people assume they can install wireless printers the say way they have installed normal printers for years - which is completely untrue. Because of the newness of the technology, they are especially sensetive - and the 'overly cautious' approch is advised.
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

  • Where does the cord hook up to a printer?

    I  HAVE  AN  HP  LAPTOP  AND I HAVE BROUGHT A CORD TO HOOK  UP  TO  THE  HP  LAPTOP  AND I AM WANTING TO KNOW WHICH OUTLET ON THE SIDE OF THE LAPTOP DO THE CORD GO AND ALSO TO THE PRINTER.

    Hi,
    What is the cord/cable, does it look like the following one ?
    Please use USB 2.0 port on your laptop.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Epsom Printer won't print / driver problems / rastertoescpII issues

    Basically, I can no longer print from my iMac to my Epsom Stylus Photo RX640, even though the scanner on the same all-in-one printer works fine.
    I know there have been a few posts on this print problem issue (an error message reading " /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS / rastertoescpII failed ") but my attempts at multiple fixes have all failed.  I believe this problem was triggered by Apple's last software update.  (Epson have been helpful but they swear this an Apple problem).
    I have tried various combinations of:
    - removing and re-adding the printer from my printer list,
    - resetting the printer system,
    - downloading a new driver from the Epson site,
    - deleting the Epsom file (HD/Library/Printers/EPSON) and then doing Apple's Software Update to bring it back,
    None have worked so far, and I've been through so many of the similar threads on Apple's Support that my head is spinning!
    Can anyone recommend the right order to do these fixes in as much detail as possible?  Or maybe there's something I'm overlooking?
    Many, many thanks if you can help me!

    Hi,
    try this link pls and write back:
    http://esupport.epson-europe.com/ViewArticle.aspx?lng=de-DE&kbid=324688&data=vRa xNXeC8zg6nFcPT30w8SkIq82DTxLMRmeWCbPfW1oU003D&cl=1
    and this one:
    http://esupport.epson-europe.com/ProductHome.aspx?lng=en-GB&data=vRaxNXeC8zg6nFc PT30w8fwRrI0jE0S6q1rSIZkIlwYU003D
    Greets

  • I can't hook my ENVY 5530 printer to my Chromebook? Can you help me?

    I cannot hook up my ENVY 5530 all-in-one printer to my HP Chromebook.  Can anyone help me?  I can't even download the installation software onto my Chromebook.  Thanks.

    Hi Volksmarch,
    Welcome to the HP Support Forums. I understand that you have a Chromebook and an Envy 5530 printer and would like to get them setup and running.
    Let's start by getting the printer onto your home wireless network. That can be done from the front panel of the printer using the Wireless Setup Wizard. If you are unsure how to do this the steps can be found on page 55 of your User Guide.
    Now that the printer is connected to your wireless network we need to setup the ePrint feature of the printer. I have included the Getting the Printer Claim Code. Once you have the web services information sheet with your printer claim code, please follow the steps in Setting Up a Custom Email Address for ePrint.
    Now that we have customized ePrint email address we need to set up Google Cloud Print. Please follow the instructions in Using Google Cloud Print with your HP Printer. Please follow the steps for an ePrint-enabled printer. You should now be able to print.
    If you run into any issues with the above, please let me know at what step things went awry and the contents of any error messages.
    Have a good weekend.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Help to hook up hp envy4500 printer to my g4

    how can I get help to hook up my HP envy 4500 printer to my zg4zzzpower zzzbook

    Hello ramirorcarlos,
    Can you please let me know which operating system you are currently running? Have you had any others printers previously installed on you g4? Are you planning on going USB or wireless?  I will watch for your reply, so we can begin troubleshooting.
    Thanks,
    **HevnLghHelP**
    I work on behalf of HP

  • Epsom Printer Update Problem

    Hi
    I did a software update yesterday which installed a new driver for my Epsom RX560 all in one printer. Ever since then I have been unable to print, each time I try it tells me that my ink levels are low and they need replacing although this isn't the case, they are almost new and the level indicator reflects this.
    How can I remove the update and go back to the previous setting ? I have loads of printing to do and i'm totally stuck
    Thanks for any help

    It's Epson, not Epsom.
    I had a similar problem a while ago after installing the last but one batch of Apple Epson driver updates. After a lot of calling Support at Epson UK, I finally came across one honest guy who told me to re-install the old drivers because the new ones were no good, and told me where to find them. Or gave me a special link- I can't clearly remember now exactly how it went.
    Since then I've seen 2 Epson Printer Driver updates from Apple and have not installed them, including the recent ones released yesterday, and am still printing and scanning with no trouble. Interestingly, after that the head honcho at Epson started emailing me, trying to get me to snitch on the Epson UK techie guy who told me about the dud drivers. I refused to give his name.
    I suggest you explore the Epson UK support site and look for the earlier version of the Apple drivers.Or you could even try calling them and pretend you installed the new ones "by mistake". Good luck and in future never install new Epson drivers if your current ones are working.

  • How do i hook up my wireless printer to my mac? it has no cd that came with it, i have no drive either, but i can't find any apps or figure out how to scan for it

    need help again, thank you much.

    That information should be included in the printer's documentation.
    The following Apple Support document may also be helpful: OS X Mavericks: Set up a printer

Maybe you are looking for

  • NME-CUE stuck in waiting after upgrade from 8.5 to 8.6

    Hi, I have been trying to upgrade our CUE from 8.5.4 to 8.6.4, but after the upgrade it is stuck in the below stage. Any help would be much appreciated.         Welcome to Cisco Service Engine Power button monitor started Setting the system time from

  • SDK for creating PDFs, that can be emailed to end user?

    Apologies if this is in the wrong section I have been searching for a while but haven't found anything yet that I can see that covers my question, so please redirect me if this is a common/easy question! This is not a matter of the user clicking on s

  • Help with Choosing f4v Video Bitrates

    Hello, I don't know if this is the correct forum but the topic is relevant to Flash. I have a video business and my website has a lot of video examples.  I wanted to show some image quality as well as a decent frame size for viewing. The video files

  • Can only see desktop background & windows are blank

    My computer (a G4 MDD) is not starting up properly. It will start up but icons, the dock, and text in the menu bar will not appear. It appears the computer works. I had an alert pop up which only appeared as a white window box. I couldn't read it. I

  • BUG: foreign key not altered when on delete is changed

    JDeveloper 10.1.2.0.0 Problem: create a master/detail relation in the database diagram. Set the foreign key to restrict references. Generate DDL directly in the database to create the tables and FK. Alter the FK to cascade on delete and regenerate th