Hooked up RT31P2 and killed internet connection....

I spent an hour with tech support hooking up my Linksys WRT54GL wireless router with 3 computers (one of them a laptop) and have suceeded. However, I went to hook up my Vonage router and when I did I lost internet access. My hook up was as follows. CAT 5 cable from RT31P2 (Internet port) to Arris model TM402P/110 from Time Warner cable and then CAT 5 from Port number 1 on the RT31P2 to "Internet" port on the WRT54GL.
I obviously took that off to come here and ask: Did I connect wrong or is there something wrong with the RT31P2? It worked at my other place wonderfully hooked up to my old router (Linksys BEFSR41)
Can anyone tell me how I can get my vonage back up and running and have internet without problems or if there even is a way?

If your WRT54GL router is still fuctional when you connect your modem to WRT54GL router...Then the set-up should be Cable Modem connected to the Internet Port of WRT54GL router using CAT5 Cable, CAT5 Cable from Ethernet Port1 on the WRT54GL to the Internet Port on the RT31P2 router...Everything should work fine...

Similar Messages

Up and Down Internet Connection

Recently my MacBook is having up and down internet connection. I'm using the new Aiport Extreme base station which is connected to my cable modem. By up and down I mean, the connection seems to go in and out.
My Airport signal status is full bars, so it seems to see the base station. It is like the radio signal or whatever gets tangled and drops connection. I have completely reset the base station and started fresh. I've unplugged the modem and base station and gone through all the basic troubleshooting steps.
My wife has a PowerBook G4 and she can surf with no hiccups, while my machine stalls. One thing I have done to keep a solid connection is to connect iTunes to an internet radio station. It seems like the stream keeps the connection without dropping?
Any ideas on what is going on? Is my internal airport card bad or are is there something else going wrong? Any help or insight is appreciated.
Thanks.

Try…
1) Resetting PRAM…
http://docs.info.apple.com/article.html?artnum=2238
2) Setting your Airport to connect to "Preferred networks" rather than Automatic (done in System Preferences > Network > Airport > Airport)
3) Make sure your home network is at the top of your Preferred networks list
4) Failing those delete your wireless network profile, apply the change and readd your profile

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do?

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.

Your warranty includes 90 days of phone support. Contact Apple.

Why can't I log into my messages or face time and my Internet connection is great

Why can't I log into my face time or messeges and my Internet connection is fine

iOS: Troubleshooting FaceTime and iMessage activation

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

Me too!!! It says check your Downloads, but unable to find Downloads...

Why is my macbook pro running so slow and losing internet connection?

Why is my Macbook Pro downloading so slowly and losing internet connection frequently?

Write off the MS stuff as indicators for now--starting with Office 2008, they developed very long launch times. The time to launch 2008 on my old 1.25Ghz G4 and my MBP 2.2G are virtually the same. Even document opens/saves are slow compared to Office 2004 and earlier.
1) You have adequate hard drive space so that eliminates one of the usual suspects.
2) Check for runaway background processes. Quit all running user applications so the computer is at normal idle. Find Activity Monitor in Applications > Utilities and launch it. If you've not run it before, change the "Show" pulldown at the top of the AM window from its default of "User Processes" to "All Processes." There is a column for "%CPU." Click that column header to sort by CPU usage. Watch the processes "bubble" for about a minute to get a better picture of the usage.
If any process is using more than about 25 percent of the CPU cycles while the computer is idling, post the names of the processes and we can see if they can be eliminated. My MBP shows nothing using more that about 5 percent on any given test run as long as I close all my user apps.
3) If you have never done any sort of maintenance procedures, taht can slow you down. Simply restarting the computer a few times a week clear a lot of temporary files. You also may wish to review this article on the Mac OSX periodic maintenance scripts, which, if run, also do a lot of cleanup:
http://thexlab.com/faqs/maintscripts.html
There are other useful articles on file maintenance associated with the one. Here's the index:
http://thexlab.com/faqs/faqs.html
Check out articles with "Maintain" and "Tuning" in the titles.
4) Use Disk Utility to check the SMART Status of your hard drive. A failing drive can make things slow before it makes things stop.

HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

How do i restore phone back to factory settings if there is no sim card and no internet connection

There is no sim card in my phone and no internet connection. How do i restore the phone back to the factory settings?

That is about all a user can do
One last thing ,try this thread
how to put iOS 7 into DFU mode
and try that although not an Apple supported process and read the posts carefully
but it does look as if it now is a hardware issue .....sorry
Did you not clear it before sending to the online Co
just a thought was it carrier locked ?if so I would guess the online Selling Co may have hacked it to remove the lock to sell it as a not carrier locked device

After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

please try this.
airplane mode on + wifi
You will get very good Internet connection.
This is bug of iOS 8. I already reported this to Apple to solve this problem ASAP.

Just purchased Airport Extreme ac and lost internet connection 3X. Reset to factory settings and worked for 2 days then lost connection and remedied by unplugging power supply. Anyone else having problems?

Just purchased Airport Extreme ac and lost internet connection 3X in less than one week. Fisrt time, reset to factory settings and fixed problem. Has occurred 2 additional times and connection re-established by unplugging AP extreme. Anyone else having these problems? Do I have a bad router? Thanks.

I definitely think this is a Mavericks issue. My iMac running Mavericks is the ONLY system in the house that drops the network randomly while all other systems never lose the network. No idea how to resolve this, but here is the workaround I'm posting:
I've had the 'network drop' issue with my Airport Extreme for the last 2 months. It reconnects when I pull the ethernet cable and plug it back in. I've tried downgrading the AE firmware, resetting to factory, etc. Nothing worked. I finally threw in the towel and created a script that monitors my network connectivity and restarts my interface if it senses it has dropped:
#!/bin/ksh
while true
do
yup=`ping -c1 -t2 www.google.com|grep from`
if [[ -n $yup ]]
     then echo "Internet is connected!"
else
        ifconfig en0 down; ifconfig en0 up
        echo "Down at `date +%m%d%Y%H%M%S`">>./dropped.out
fi
sleep 5
clear
done
I know its a workaround, but its saving me the headache of constantly pulling my cable and putting it back in!
Good luck!
-Mike Gray

My computer is running sluggish and the internet connection runs very slow. what can I do?

My mac air is running slugiish and my internet connection takes forever to change windows...what can I do?

If the computer is brand new, it may be reviewing (indexing) all you files for search. This will take a few hours to complete. Otherwise you likely have a program that is running poorly and slowing your system down.
Open the Fibder
Click the Go menu at the top of the screen
Click on utilities menu item under go
Open the Activity Monitor
When Activity monitor opens, there will be a lot of data in the window, to make better sense of it click on the column labeled CPU. This will sort entries by how much of your computer's CPU they use. The lower the number the better.
Locate any programs using 80% or more of your CPU. They are the likely culprits of your speed issue.
If the speed issue is only related to surfing the internet, then you more than likely have an issue with WiFi instead. Try moving closer to your wireless router to see if it speeds up.

OS 10.4.9 Combined Update Killing Internet Connection

Hey All,
So here is my situation - last night I ran TechTools as my ibook has been acting somewhat erratically as of late (shutting down completely without warning when the battery gets to about 1/4 strength). Techtools found errors and I asked for them to repair it...and it wiped my drive clean.
So, I erased and restored using the provided discs. Once this was done, I was able to connect to my wireless network no problem. I ran the software update which of course found a number of downloads. After completing most of them, my internet connection was suddenly lost. I noticed that this happened while the 10.4.9 Combined update was being installed, and it was marked as not being completed.
Network Diagnostics shows that I was able to connect to my Airport, but could no longer reach my ISP. I tried to connect via ethernet directly to my cable modem, and could still not connect.
I decided to erase and reinstall again, and the same thing happened. My internet connection was fine until the OS 10.4.9 combined update started to download. This is killing me...help?

Thanks for the advice - I do have a strong suspicion that the logic board needs to be replaced based on the other behavior that brought me to use TechTools which caused this whole mess to begin with, however AHT showed that everything passed. I do find it quite strange that it works fine until it starts to download the 10.4.9 combined update though.
I will download the combined update and burn it to a disc and try to run it on the machine tonight and see if that makes any difference. Has anyone else experienced anything like this?

Upgrade to 10.6.8 Killed Internet Connection

So I have been trying to upgrade our server, and I did the software update to 10.6.8, and whenever I do that it kills my internet connection. No matter what I do, it won't let me con

If your MacBook Pro is 10.5.8 as you say it is, the 10.6.8 Combo Pack will not work until after you have purchased the Snow Leopard install disc and run the software to upgrade your system. Once you get your Mac to 10.6.x, you can download the 10.6.8 combo pack, though I'd just recommend doing it through Software Updates as you normally would do updates.
Going from 10.5 to 10.6 or 10.6 to 10.7 is an upgrade and cost money.
Going from 10.6.7 to 10.6.8 or 10.7 to 10.7.1 is an update and is free.
The combo pack is made to go from 10.6.0 to 10.6.8 in one large update. You cannot go from 10.5.8 with it.

New to networking . . . AEBS and slow internet connection

Here's my set up:
2 white 17" iMacs running MacOS 10.4.10. 1 15" Titanium Powerbook (2002) on 10.4.10 as well.
I have Verizon Wireless which originally was getting speeds of well over 10mbps. Verizon had us update software (bad move) and it dropped to b/t 750kbps and 1mbps. The router they gave us is a Westell 327W.
I got the AEBS (n version) yesterday and connected it to the router using the WAN port as directed. I also connected a printer to the USB slot. One iMac is connected to the AEBS using an ethernet cable. After the installation i found the internet connection to be painfully slow. Tests show a speed at no more than 256kbps! I am extremely upset and disappointed. I have not tried to file share yet and I don't believe I am having any interference problems. Are there any other possible solutions? Do I need a new router? I think I'm only paying for 1mbps so I'd be happy to get that speed. But as of now, downloads are not an option for me.
Please, anybody with some sage advice, it would be greatly appreciated if you could pass it along to a network newbie. Thanks in advance.

Well, I think I figured it out. I turned off my Westell router and unplugged it and left it overnight. Then plugged it in and turned it on in the Am. Came home form work and tested the speed . . . 1.5 - 3mbps! Wow! It really jumped over night. It's always the simplest things isn't it? Let's hope that's all!

Setting up a new TC. Everything went fine. I was able to connect a macbook air, 2 ipads, an Iphone 6, and even a windows 7 PC. All devices showed a complete and functioning internet connection, but none of the devices could access the internet.

I am trying to set up internet connection to my home using a 3gig Airport time capsule as a router. I unplugged the cable from the existing router, and plugged it into the ethernet port of the TC. The TC fired up found tttttttthe internet connection, and glowed green. I set up the password, and all, and was then able to connect a Windows 7 PC, 2 ipads, and iphone 6, and a macbbook air, all running the most current os. All devices connect with the internet via the Airport device. they all say that there is a fully functioning internet connection, but none of them can actually connect to the internet. When I run a speed test via OKLA I am told that the test failed to innatiate.When I try to do a search I get an error message that the page cannot open because safari cannot make a secure connection to the server.
Any suggestions?

Inside the house I have what looks like a phone cable that is plugged into a power supply, and into a router.
What is this router?? Is it the TC or a router supplied by the ISP?
It will depend on how the system works.. but the instructions from skybeam are fairly simple.. you just setup a router with dhcp set on the WAN port for connection.
On the airport utility open your TC by clicking it then clicking edit.
Make sure the WAN is set correctly and the ISP ethernet cable is plugged into it.
And make sure Network is set to DHCP and NAT.
Please give me the screenshots of the same things from your setup.

Hooked up RT31P2 and killed internet connection....

Similar Messages

Maybe you are looking for