Hooking up a SBC Cable Modem

Have tried several times to configure my MAC PB"17" to a SBC / Motorola Cable Modem. SBC and Moto can not assist...
Can anyone assist with setting that will work with my Airport Extreme.
Much Thanks,
Mike

bacchen wrote:
@Inutel-
Sadly I do not have a TV Tuner Card. I run Windows Vista Home Premium (x64). It is also a custom computer I built. But based on the replies it's suggesting I need one? That a simple USB connection between the two will not be sufficient?
I dont think that your cable box can stream contents thru its USB ports, that wont work. Also check your video card s-video plug, most likely it's video out only (for TV monitor). You need some kind of input device for your pc to be able to connect it to your cable box, either a TV tuner card, a capture card (usb or pci card) etc.

Similar Messages

Have an Airport hooked up to a Cable modem, gives wireless access to 1 laptop but on to anything else

I have an Airport hooked up to a Cable modem. Give wireless access to my MAC Book Pro, connects to my Ipad but will not have internet access, tried a different Airport with the same results. Please help.

Thanks for the info. We will try a shortcut first and hopefully it will work.
On the Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express, then click Manual Setup
Click the Internet icon at the top of the AirPort Utility window
Click the Internet Connection tab just below the Internet icon
Make sure that the setting for Connection Sharing is set to Share a public IP address
Click Update at the lower right and wait a minute for the AirPort to restart
Now power off both the cable modem and the AirPort Express
Wait 10 minutes. Longer will not hurt at all
Power up the modem first, and let it run for 5 minutes by itself
Then power up the AirPort Express
Check to see if multiple devices can now connect

Trying to hook up to Cable modem etghernet issues

I have a G3 with a 10.4 OS. I am trying to hook it up for my daughter. I am trying to wire it into my families computer network. I plug in the ethernet cable into router, and I get no response on the computer. I hook it directly into the cable modem, and I still get no response. None of the numbers that should be coming through from the modem to the computer are available.
The cable company could not figure out why, especially since all my other computers are still on-line. Is my ethernet the problem?
Any thoughts would be appreciated. I am not terribly tech savy.
Thanks

Hi Mark
Not sure that I'm fully understanding your post "numbers coming through?".
Anyway. look at the router, does the router show another green light when you plug in the mac? if not, then the 2 are not talking to each other.
Check your TCP/IP settings the DHCP number should start with a 10.x or a 192.x
If is starts with a 169.x then the ethernet is not talking to the router. Make sure that the connection is ethernet using DHCP and NOT PPP (in system preferences - network).
I've had one or two machines that have been reluctant to change from 169. but have done so after several restarts.

HT200112 Can I hook up my AppleTV directly from Cable Modem to the Ethernet port on the AppleTV without setting up any kind of network?

I want to directly hook my AppleTV to my cable modem via ethernet port. I am doing this to avoid a slow router. Is this possible?
Thanks,
Brian

Sorry, I tried selecting both "This helped me" on your first response then "This solved my question" on your last response, but it wouldn't let me. Next time!
Thanks again,
Brian

Trying to hook up my time capsule. Plugged in the eithnet from the extreme over to the time capsule--then plugged in the time capsule--still in amber blinking light--went back to extreme and works fine--reset the cable modem in between but that did not f

Hoping someone can help with setting up my new time capsule. I am just switching from my extreme to the time capsule. I can not get the time capsule to go anywhere but to amber blinkiing. I can go back to the extreme and interenet works fine.
Here is what I did:
plugged in the ethernet cable from the cable modem
plugged in the time capsule power
Just cycles to amber blinking -- no internet connection
Tried pulling up the airport utility but it just shows my old extreme configuration and says that it is not supported anymore. Do not see how to display info on the flashing light.
I have gone back to the extreme three times and it seems to work fine.
I also repowered the modem in between trying to get the time capsule to work

Is this a cable modem? It has to be off for at least 20min and sometimes much longer before it will give up the old settings. You might even need to power down the cable modem overnight.
Tell us exactly what broadband you have with what ISP and exact model of modem..
The new TC cannot be setup without using the latest airport utility 6.3.1 or 6.3.2 and you need Lion - Mavericks to use it.
The computer also needs to have ipv6 setup to local link on whatever you are connecting with, wireless or ethernet.

Can a G4 Desktop OS 8.6 be hooked up to cable modem high speed?

Can anyone help me set up my apple G4 desktop os 8.6 to work with a high speed cable modem to get internet access?

Hi Gepicou
In a word yes, your G4 will definitely support a high speed DSL connection - I'm writing to you on a 7300 powerPC mac I've just dusted off, sent to a repair shop where they set her up for my 512Ko line. I'm deep in the countryside so I don't get a powerful signal, but all is fine. The modem is a Thompson 510 (ethernet).
Normally I use my present Powerbook running on Panther, and since I'm going to England for work reasons, I'm leaving my partner with my old (and dear) Mac to use.
You could try the forum "Mac OS 10.3" > getting online - loads of folk there have used OS9 before, and have experience in newer connections that weren't really around when OS8 or 9 were still mainly in use.
Otherwise, if you get your running orders from that forum, take your G4 to a technician - mine configured the modem in 20 minutes, it cost me 20 euros...
Good luck!
Kathy

HT1331 I just bought a airport wireless router I have a time warner cable modem. I have hook up the modem correctly to my new apple airport router and my modem is not working with the apple airport router. what do i need to do?

I just bought a airport wireless route and I have a time warner modem. My problem is my modem is not connecting to my apple airport router. What do I need to do?

Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE>

WRT54GS with Mac OS 10.6.8 and RCN cable modem not working

Hello,
I have a Linksys WRT54GS, version 6 with Mac OS X (version 10.6.8) hooked up to a Scientific Atlantic cable modem, with RCN as the ISP.
Recently, RCN had some network issues, and so I had to power down and reset my modem. The modem is working fine now -- no problems at all when the Mac is connected direclty to the modem.
The router's network is OK in that I can connect the Mac wirelessly to the network, but I can't connect to the internet through the router (through neither the wireless or wired connection).
I have downloaded the latest firmware update for the router, following the Linksys site instructions, but this has not helped me solve the problem.
Does anyone have any advice as to what I should do? I did call Linksys tech support on the advice of RCN, and they said that the router does appear to be working (power, WLAN, and Internet lights are on), but they would be charging me nearly the cost of a new router to fix the problem.
Any advice would be appreciated!

Since you upgraded the Router WRT54GS with the latest firmware so once reset the Router and power cycle the whole network… Then connect the Modem with Linksys Router on the Internet Port and then connect any one computer to any one of the Ethernet port on the Router [Numbered – 1, 2, 3 and 4]… Let me know the RCN connection is a DSL connection or cable connection…
So if you have a DSL connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4020&userrole=Linksy...
So if you have a Cable Internet Connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
As far as the wireless is concern:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page…
# Then Click on wireless Tab create the Wireless Network Name SSID and select the channel to 6, 9, and 11… Click Save Settings...
# Then Click on Wireless Security sub tab and select the security mode and provide the password as per the requirement… Click Save Settings...
After doing the settings try to connect the preferred network on the wireless devices and check the connectivity….

How do I configure my AirPort Extreme as a wireless access point? My cable modem goes to a router, and one of those ports goes to my AirPortExtreme.

I am about to hook up my airport extreme. My cable modem goes into a router, and one of those ports will supply my airport extreme. I was told by the Apple Store that I would need to configure my airport extreme as a wirreless access point. How do I do this?

With sbcgobal I got a Gateway 2wire modem. What I would like to know is how do I set up my APE as remote?
Unfortunately, you won't be able to do this as few non-AirPort routers will work with AirPorts in a Wireless Distribution System (WDS).

Connecting my airport extreme to comcast cable modem-- AGHHH

I've had three Comcast techies to my house since switching over to their triple play offer. Today, I finally got connected to the Internet, through their cable wired into my house, and connecting their modem to my Mac mini (which does not have wireless card). I want to hook up two other laptops in the house, but can't figure out how I do that? The Comcast guy today said with an ethernet cord. So I've plugged the cord into the back of my Extreme, but the other end doesn't fit into the only slot remaining on the back of the cable modem -- which is labeled "phone"... Does anyone know how I do this?
Thanks,
Jill

You need either a router or an ethernet hub/switch between the modem and the computers to give you the needed ethernet ports. Hubs/switches are cheaper but, depending on the Comcast policy on multiple computers on one modem, may not all work at the same time.
A router, on the other hand, allows up to something like 255 devices to be connected. Instead of the Comcast server passing out IP addresses as would happen with a hub, the router issues the addresses to each device. This is useful when the ISP limits how many IP addresses can be assigned to one account (we had this with our ISP--limit of three--and is why we now use a router).
Basically, the arrangement is:
cable from wall >>> cable modem >>> router or hub >>> multiple ethernet lines out to individual computers
See if this video helps:
http://videos.howstuffworks.com/labratstv/829-episode-6-home-network-primer-vide o.htm

Vonage between cable modem and Airport Express is a problem

I have my Comcast cable modem connected via Ethernet to the Vonage box which is connected via Ethernet cable to my Airport Express. When I try to connect wirelessly via my Powerbook it's a crapshoot whether or not I can connect to the internet. Mostly the quality is very poor if you can connect at all. If I cut the Vonage out of the equation hooking the cable modem to the Airport Express it works perfect. So Vonage is my problem and I need to change some settings either with my computer or my Airport Express, but which ones? I've been given several different ideas from the information I've sifted through (i.e. change the DNS, change the sharing prefs, get a hard wired router). Oddly enough an old HP computer I have in the basement connected to the internet via another Airport Express has no problems with connection at all. If someone could let me know which of these fixes I am preparing to try would work the best I would appreciate it.

Interesting. So you have two Airport Express devices configured into a WDS, with the one upstairs functioning as the main base station and the one downstairs functioning as a remote base station. And your PC downstairs connected to the remote base station has no problems connecting to the internet. Is that PC cabled to the Airport Express, or does it connect wirelessly to the remote Airport Express?
What happens if you bring the Powerbook downstairs to where the PC now resides. Does the Powerbook then get the same great internet connection as the PC?

My internet works fine with my wired cable modem, but when i connect to my extreme base station and setup my wireless network the internet no longer works and my apple tv by default

my cable modem works fine, but when I hook it up to my extreme base station and run through the prompts and set up my wireless network it doesnt work and neither does my apple tv by default. I am unsure how to correct this problem. It will come up saying that I dont have an IP address when I have it set to DCHP so I dont know what the problem is.

Push the reset button on the modem and power the modem off
Power off everything else....all devices....order is not important
Wait 15-20 minutes or longer
Connect the Ethernet cable from the modem to the WAN port (circle of dots icon) on the AirPort Extreme
Power up the modem and let it run for 5 minutes by itself
Power up the AirPort Extreme and let it run for 5 minutes
Power up each other device one at a time a few minutes apart
Check the network

HT2497 Using Time Machine for home wifi just fine. Switched to cable modem from DSL. Now having trouble connecting laptops to wifi. ISP says it is not their fault. Mac books won't connect on their own.

Changed from DSL to cable modem. Now Mac book pro won't connect to wifi - Time Machine?
One Mac ok, other not. Help?

Thanks. We have been using an existing Time Machine for wifi. Cable modem replaced DSL router and was hooked up to Time Machine. What's odd is that 3 computers and iPad2 are connecting to home wifi just fine, using exact same network and password as before. My Mac book pro and an older iPad are not. IPhones are also connecting to home wifi just fine. I managed to get my Mac book pro hooked one time by copying ip address from a Mac that was working (entered manually) then turning that one off. That's not what I need.
The error message is "no ip address".

Mac Mini not working with AOL Cable modem

All,
I just bought a brand new Mac Mini but it not working with AOL. My windows XP PC working well with AOL but not with mac mini. Any suggestions? thanks
Hung

I just found an interesting thing that i brought my mac mini to Apple store where i bought it. Hook up with store cable, it can go thru to internet with out sign on AOL. ALso I can connect to AOL very easy. Brought it back home, I tried to open browser w/o sign on AOL like i did at Apple store, it did not work. I also tried to sign on AOL alone, still not work either. The weird thing is, my other Windows XP computer is working well with AOL. I called customer service of AOL for help, who takes care the Mac computer, asked me to follow the simple procedure that I already did before i called them like unplug cable modem, restart computer...etc. Nothing new, and then they transfered me back and forth between Mac and Windows specilist with no help. I was on phone with them for 2 hours yesterday. I'm very disappoint with AOL customer service with the way they serve the customer. I'm thinking to cancel membership with AOL where i stay with them more than 10 years, and look for another cable or DSL ISP. Now I'm packing the Mac Mini back to box and bring it to Apple store to return it. Next thing, is search around which ISP, who supports the Apple comp. I'm living at Los Angeles area where's very easy to find a local ISP Verizon, Earthlink, Road Runner... I'll be back to buy a new Mac when i get the internet ready. I love Apple computer, and i want to have it.

Wireless bridge be setup - cable modem (downstairs) to a EA4200v1 to a EA6500 (upstairs)?

Hello, I have a question on how to improve my home network. I have Comcast digital cable TV and High speed internet that is very spotty in the coverage in our split-level home. Currently my home network setup has the cable modem located near the main box in the basement family room and a Cisco Linksys EA6500 centrally located upstairs. This does not give adequate WiFi coverage to the downstairs basement family and bedroom for Netflix, xBox and laptop computing.
I have a Cisco Linksys EA4200v1 router that I replaced the Cisco Linksys EA6500 with. Is it possible to hook the EA4200v1 router up straight from the cable modem downstairs and then run the network cable out to the EA6500 upstairs and have them all on the same network? Would this give me good coverage on both levels of the house?
Thank you so much for any assistance you may be able to provide.

The router on bridge mode would lose all router capabilities. However the wireless capabilities would remain. The USB functionality of the router would also not work when in bridge mode.
Since the router connected to the modem is the EA6500, I suggest you setup the E4200 to bridge mode. Make sure you have the latest firmware installed on the E4200 since the old firmware doesn’t include bridge mode capability.
Setting up your Linksys wireless-N router to Bridge Mode

Hooking up a SBC Cable Modem

Similar Messages

Maybe you are looking for