Hooking up my Panasonic Home Theater System

I need help! I wanna hook my Theater System up with my HDTV, HD Cable box, and with my PS3. My goal is to watch tv and watch my blu-rays with my surround sound system. My tv only has one hdmi input and that is currently hooked up to the ps3. So I am wondering what audio/video cables I need to purchase and where to run them. Any help would be greatly appreciated.

Peep this...http://www.forums.bestbuy.com/bb/board/message?board.id=TV_Home_Theater&thread.id=1153
Disclosure: Former BBY employee.

Similar Messages

Desktop/Finder keeps rebooting after upgraded to Maverick (mac mini hooked up to a home theater system)

My desktop keeps rebooting ever since I upgraded to Mavericks.
Current setup, Mac Mini hooked up to home theater (Panasonic SC-HTB20) that is then hooked up to my Panasonic Plasma TV.
I usually leave my Mac Mini on running and at least once a day when I turn on the TV I can see that my desktop was rebooted. Firefox and Chrome will say that it wasn't shut down properly and if I want to restore my previous session. Also some times when I switched the input to watch TV and switch back, all my windows will be scattered out of place. For example Chrome will be in the top left hand corner to the point that it's almost minimized and I wouldn't be able to move it as well. Only thing I can do is close out these applications and relaunch them. It doesn't appear that the OS actually crashed, but more like the desktop/finder itself crashed. Cause once in a while I will switch back or turn on the TV and the screen will stay black for a few minutes then I'll see the cursor in the top right hand corner. After that I will start to see the desktop and my application start loading. It doesn't go through the regular process of rebooting where you see the Apple logo so I don't think the OS actually crashed but I could be wrong.
For some reason it seems like Maverick doesn't like the home theater system. An almost guarantee way to reproduce the issue is to wait for the home theater to turn off after it's been inactive for a while. If I turn it on the home theater to have the audio coming from it I will see the desktop goes black immediately then the whole desktop reboot process I mentioned above will kick in.
Never had any of these issues on 10.7 before I upgraded to Maverick.
Anybody have any suggestion? I really don't want to format and downgrade back to 10.7.
Thanks

Sounds like a kernel panic.
If you post the report we could have a go at deciphering it.
It would be in /Library/Logs/Diagnostic Reports.

Trouble w/ the connection from my Panasonic Home Theater System

So I recently purchased
Panasonic - 5.1-Ch. 3D Blu-ray Home Theater System
Panasonic - 50" Class / 720p / 600Hz / Plasma HDTV
and I already have a Att u-verse Box at my house
now I have the home theatre system and the ATT uverse connected to the TV with their own HDMI cables. The Att is connected to the 1st HDMI port and the home theatre is connected to the 2nd HDMI port.
The guy at the store said I could get surround sound when I'm watching cable if I got a Rocketfish Digital Optical Audio Cable and plugged it in to my uverse box,
but now I'm confused because I tried plugging it in from the uverse box to the TV and that didn't work, then i tried connecting it from the uverse box to the theatre system and that didn't work,
but the loop hole we found is that if we unplug the HDMI cable that is connecting the theatre system to the TV (only unplugged from the TV), we can hear the cable on surround sound, but if it's plugged in we can't hear it, so now we have to unplug and plug in to watch movies or cable, but that's way too frustrating to deal with, does anyone know how to fix this so my surround sound works with everything w/o having to unplug?

bhsmariana wrote:
So I recently purchased
Panasonic - 5.1-Ch. 3D Blu-ray Home Theater System
Panasonic - 50" Class / 720p / 600Hz / Plasma HDTV
and I already have a Att u-verse Box at my house
now I have the home theatre system and the ATT uverse connected to the TV with their own HDMI cables. The Att is connected to the 1st HDMI port and the home theatre is connected to the 2nd HDMI port.
The guy at the store said I could get surround sound when I'm watching cable if I got a Rocketfish Digital Optical Audio Cable and plugged it in to my uverse box,
but now I'm confused because I tried plugging it in from the uverse box to the TV and that didn't work, then i tried connecting it from the uverse box to the theatre system and that didn't work,
but the loop hole we found is that if we unplug the HDMI cable that is connecting the theatre system to the TV (only unplugged from the TV), we can hear the cable on surround sound, but if it's plugged in we can't hear it, so now we have to unplug and plug in to watch movies or cable, but that's way too frustrating to deal with, does anyone know how to fix this so my surround sound works with everything w/o having to unplug?
Do this:
Check your manuals for the exact ports and menu settings for the following, the TV should have come with a poster that shows the connections as well.
Take the Rocketfish cable back to BB You can only get 5.1 surround over optical from your Panasonic TV when using the internal tuner, and other source, like HDMI will be limited to 2.1 audio.
then
1 - HDMI from your cable box to HDMI 2 on your Panny TV.
2 - HDMI port 1 which should be labeled ARC from your Panny TV to the HDMI OUT port on your Panny reciever. It should also be labeled ARC.
3 - Turn on Viera Link on both the TV and the reciever.

Hooking up DVD Player/Home Theater System to my Powerbook???

I was wondering if I could connect my one piece dvd player that is also a home theater amplifier to my powerbook. The player has the usual connectors, RCA, S-Video, and Component outs. Is there a way to hook it up so the video is displayed on my tiny 12 inch powerbook?
BTW, it's an one year old powerbook.

Anyone???

How do I connect the ipod nono 7th gen. to Panasonic home theater sound system

I ordered an ipod nano for my daughter for christmas as her old original ipod died. She has a Panasonic home theater sound system (SA-PT950) that came with a little dedicated ipod station to connect her ipod to and get surround sound music. Now I see the 7th gen. nano has a different interface and won't work in this station. Is there an adapter available or does anyone know another way to connect it? Thanks

http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=72

Could the Panasonic 5.1 3D Home Theater System Blu-ray Disc Player be used as speakers on a windows

Could a
Panasonic - 5.1 3D Home Theater System - 600 W RMS - Blu-ray Disc Player be used as only speakers on a windows 8.1 desktop? And if so would it use bluetooth?

Hello coltyn-
Based on the product description, it certainly looks like it may be able to be used as the speakers for your desktop set up. Most likely you will need to buy some additional materials. Unfortunately, I’m not an expert on this, so I would either recommend waiting to see if one of our community members comments on this or you can check with the experts at your local Best Buy store.
Thanks for posting!
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Help on purchasing a Home Theater System...

Hi everyone,
I just bought a new HDTV and I am now looking into getting a good Home Theater System, since as I'm sure you all know, the speakers on my TV are pretty pathetic.
But in all honestly, I really don't know much at all about speakers and home theater systems, so that's why I'm here.
I hear that most home theater systems come with DVD and Bluray players, but I don't need either of those, since my ps3 and 360 give me 2 DVD players and a Bluray player already.
I am really looking to spend less than 400 bucks, or around that area if possible.
I also have one question: My HDTV only has 2 HDMI ports and one Component port and since I am using both of those (HDMI is being used for the cable and ps3 and component is used for my 360) I am wondering if there is some other way of connecting the Home Theater System?
Thanks in advance for all your help.
Solved!
Go to Solution.

paulmohr wrote:
Ok after looking at the manual for that reciever this is what I come up with.
One HDMI cable running from your PS3 to the reciever (BD in would be my choice)
One HDMI cable running from your Cable box to the receiver (dvd in would by my choice)
Now for you Xbox 360 you said you have the component cables for it, from what I can tell you can also get an HDMI connector as well. What you choose is up to you but this is how it would work.
Xbox with component cables:
Since the receiver doesn't have component swtiching you would have to hook the xbox up to your tv with the component cables ( the way it is now).
Then run an optical audio cable from the xbox to the receiver SAT optical in.
If you get the HDMI cable most likely you would just run the HDMI cable from the Xbox to the receiver like the other components. If you went this route I would hook the xbox to the dvd hdmi in and the cable box to the SAT hdmi in though. Honestly it doesn't matter but it just might be less confusing that way.
Then you would need on optical cable running from the TV out to the TV in on the reciever. If you never watch regular tv you don't need this since the sound will come from your cable box anyway. But if you also have the tv hooked up to an antenna or something this will send the sound to the receiver.
And one HDMI cable running from the Receiver out to on the HDMI inputs on the tv. This is what will carry all of the signals going into your receiver to your tv.
And then the speakers connections which should be described in the instructions for the receiver. Just make sure the polarity is right when you connect them.
This configuration will let you control most or all of the components through the receiver since it switches most of them. Just choose the correct input and the tv will display it.
Okay, so according to that, I would need 4 HDMI cables to my HDTV, which would be impossible.... Unfortunately, my new HDTV only has 2 HDMI porsts, so is there a way to get around that issue? If I use HDMI for the ps3 and HD cable box, then is there a way to hook everything else up (including the reciever) without HDMI?
Thanks in advance.

Can I connect my iMac's iTunes library via wi-fi to my Blu-Ray player so I can listen to the music on my computer with my home theater system?

My music library is on my iMac, located in a different room of the house than my home theater system with a decent Denon receiver and good Infinity towers. I have an iPod connector to the Denon which I can use, but the iPod has a limited library of songs, so I would like to somehow access my iMac music library and be able to play it through the home theater system. Hard wiring the components is out of the question due to length of run through several rooms of the house, no basement and cathedral ceilings. I already have my iMac and my Panasonic Blu-Ray player both connected to my wi-fi, and it seems there should be a way to connect both of them using the wi-fi. The blu-ray player is DLNA, but the Mac isn't, so that is out of the question. Is there any other way to get these components to talk to each other over wi-fi?

There is a DLNA media server called MediaLink that is designed for use with the Play Station 3. It is not advertised as working with other DLNA clients but it usually will. I use it to stream audio, video and pictures to a WDTV media player in my bedroom. Works great, even supports iTunes playlists. I believe it still has a free trial period so you can see if it works with your player.

Playing iPod Mini through Home Theater system

Hi all,
I have a Sony Home Theater system. It plays CDs, DVDs, AM/FM, and video from the TV. I bought a Monster cable to hook up my iPod Mini to the player (it has 2 jacks, a red and a blue one that goes to the player), hooked it up per the instructions (put the same color plug in the same color jack on the player), but no sound comes out. The menu options on the player are DVD, Video (which comes from the TV), FM and AM. I don't know how to program the player to make it play from the iPod, and as you can probably tell, I'm a girl and extremely technically challenged. I don't even know where to begin. Can someone offer some guidance, please? Thanks in advance!

There should be an auxiliary input on the Sony.
You need to select this input on the Sony.

Choosing a Budget Home Theater System

I'm looking to add theater sound to my family room, but my budget is pretty tight. I currently have a Panasonic Plasma Screen that is connected to my cable box via HDMI, a Panasonic Blue Ray Player that connects to the tv via HDMI, and an XBox 360 that connects to the tv via component cables.
To be honest, I don't know much about theater systems, and I just want something that is decent sounding with the connections I need. Can someone offer a few suggestions? I see that Best Buy offers a couple systems for around $200, but I'm not sure that'll get me what I need to connect all of my devices.
Thanks.

The first step to building a good home theater system(at any budget), is to decide where you will put speakers, and how you will handle wiring.
If your budget is $200, you're almost certainly looking at a modest satellite(small) speaker system. These are typically sold with a built-in DVD. The sound won't be anything speacial, but it will certainly outdo the TV alone.
I suggest investing in an actual surround receiver. Sony isn't known for the greastet sound quality, but there receiver usually pack alot a features for cheap. Yamaha has a some good offerings as well.
The most important part of any home theater system is the speakers. You you're gonna cut corners, do it on receiver, not the speakers. Assuming we spend about $100-$150 on the receiver, you'll need to pony up at least $400 for a decent speaker/powered subwoofer package. Best Buy has a pretty aggressive deal on the Quintet package from Klipsch for the day after Thanksgiving.
Sure you'll spend more money on a setup like this, but the sound and overall usefullness of a real receiver are worth the extra investment.
Disclosure: Former BBY employee.

How to interface SC-HT800v Panasonic Home Theater with New Samsung LED/LCD 6500 series TV

I don't see how the 14 pin cable coming out of the subwoofer will connect to the new TV or our new Blue Ray player Samsung BD-C5500. We currently have no receiver since that was in the Panasonic VCR/DVD that we have abandoned. Can you confirm this & also offer a suggestion of a new home theater system? Thanks, Susan

fp7562 wrote:
I don't see how the 14 pin cable coming out of the subwoofer will connect to the new TV or our new Blue Ray player Samsung BD-C5500. We currently have no receiver since that was in the Panasonic VCR/DVD that we have abandoned. Can you confirm this & also offer a suggestion of a new home theater system? Thanks, Susan
Buy a Samsung Home Theater soundbar system. That will fit your needs perfectly not to mention you will be able to control your TV, Blu-Ray, and the sound system with a single remote control.

Philips - 1000W 5.1-Ch. Home Theater System with Upconvert DVD/CD/MP3/DivX Player Wire'LESS'?

Is this thing wireless or Wiired? BestBuy needs to describe this needed info in thir item descriptions.

Hey Black_Hawk_262,
According to information provided by the manufacturer, Panasonic’s HTS3544/37 is a wired home theater system. Unfortunately, the “TV” inputs are standard stereo (RCA) inputs and the model only appears to support digital coaxial audio as an output. If you’d like more information though, I would strongly suggest visiting Philips’ website for more information.
Hope this helps you out!
Agent Aaron
Geek Squad® Community Connector
Go Ahead. Use Us.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Need Help choosing a new tv and home theater system.

I can never really keep up with all the new stuff coming out but i am not really looking for anything too fancy just simple. I looking for something around 50" and a blue ray home theater system. My budget is roughly around $2000 or so. the less i spend the better hahhahaha. anyways the only thing i will be hooking up to the tv is the new home theater system, cable and Xbox 360. Any suggestions?

All the 50" tvs are plasma, so I would recommend:
Model: PN50C680G5F | SKU: 120138 Model: YHT-493BL | SKU: 987545 Model: 114011-00 | SKU: 9343356 Model: 114011-00 | SKU: 9343356 Model: BD-C5900 | SKU: 1012858
That's a Samsung 50" 3D Plasma, Blu-ray player, Yamaha Home Theater system, and your 2 HDMI cables. You'll need another HDMI cable for Xbox 360 if you don't have one already to connect to the receiver.

How to connect Apple TV to projector and home theater system?

I have an Optoma HD20 projector that I have a long hdmi cable connected to and plugged that into my Apple TV. I also have an older home theater system that does not have an optical audio input. So I bought an adapter to go from optical audio to RCA cables. When I get it all plugged in and turned on I can't even get the video on my screen. What am I missing?
This is the adapter...
http://www.amazon.com/gp/aw/d/B005F20756

Darn. Ok. Then do you have any suggestions for other options to connect the two? My projector is mounted to the middle of the ceiling with a whole for the wires that go along inside the ceiling to the other side of the room.

How to connect mid 2012 MacBook Pro to home theater system

Okay so I'm looking at purchasing a home theater system and was wanting to know the best way to connect my mid 2012 MacBook Pro to the home theater system and TV. I am wanting to play both movies (Netflix etc) and music. Will my MacBook play 5.1 surround sound to the home theater system? Whats the best way to connect this all up? MacBook audio to the home theater system via Digital Optical from the headphone port with a 3.5mm to toslink adapter and then video to the TV via HDMI cable from the thunderbolt port with thunderbolt to HDMI adapter? My thinking was to separate the video and audio to get the best picture and sound. Any help/advice on this would be greatly appreciated.

Will my MacBook play 5.1 surround sound to the home theater system?
Yes.
Whats the best way to connect this all up?
An AppleTV or any AirPlay-enabled AVR. AirPlay is wireless, though you could use wired Ethernet if you want to avoid all the potential problems associated with wireless. Make sure it specifically says AirPlay which is Apple's proprietary technology. There are quite a few of them to choose from today. Denon is one, I believe Pioneer, there may be others. Shop around. The AppleTV's price was recently reduced to $69 US and may actually be the most cost-effective solution, allowing you to research the best AVR for your needs. The AppleTV has both HDMI (audio and video) and optical audio outputs.
MacBook audio to the home theater system via Digital Optical from the headphone port with a 3.5mm to toslink adapter and then video to the TV via HDMI cable from the thunderbolt port with thunderbolt to HDMI adapter?
Way too complicated But if you really don't want to use AirPlay, you can purchase an inexpensive (< $10) Thunderbolt to HDMI adapter and an equally inexpensive (<$3) HDMI cable to any HDMI input on your AVR.
My thinking was to separate the video and audio to get the best picture and sound.
It makes absolutely no difference. HDMI and optical audio use completely identical digital audio signals.

Hooking up my Panasonic Home Theater System

Similar Messages

Maybe you are looking for