Hooking up wireless router -it is not found.Told to use a wired computer/only have laptops.

Solved!
Go to Solution.

Your laptop has an ethernet port so connect it to port 1 on the router.  Go to 192.168.1.1 username blank, password 'admin' and configure your hour like everyone else.

Similar Messages

  • Connection problems after installing wireless router: frequent "Server not found"

    I recently got a Linksys wireless router but since then, a lot of webpages show "server not found" frequently. I can eventually open these if I keep refreshing the page or come back to it later. This only happens to my desktop PC connected by a cable but never happens to our 3 laptops with wireless connection. The LAN cable changed but problem persists. Desktop PC swapped but problem still persists. Is this simply a defective router?

    What is the model no of the router...?
    Try changing the MTU size to 1350 on the router and power cycle the router and check..

  • I have an Airport Extreme wireless router & I can not connect my Kindle.

    I have an Airport Extreme wireless router & I can not connect my Kindle.  Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet.  It says the password is incorrect.  I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly.  I see no tab to create a guest network.  I do not mind giving my password to visitors, but that does not work.

    If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
    As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

  • Using time capsule model A1409 and trying to use it as only backup. Already have Verizon wireless router. Do not know which cable port to use in back of time capsule. And also it is asking for password. Have tried all of mine and it will not work.

    Want to us my time capsule model A1409  as only backup. 2 TB hard drive.
    Already have Verizon wireless router. Do not want to use Time capsule as router, only back up for iMac.
    Do not know which cable port to use in back of time capsule to Ethernet port back of my iMac.
    And also it is asking for password for the server John Garland's Time Capsule so Time machine can access it..
    Have tried all of passwords can think of and none work.
    Held the reset button for one second on back of capsule and do not see if anything happened.
    What a conundrum.
    Appreciate any help to get this working.
    Thanks,
    John R

    I have a 2TB Timecapsule and really only use it for Time Machine backups. But the Wi-Fi side is used to sync my iPad at times.
    Mine is wiredup thus;
    Eth cable from iMac to modem (not the WAN port should you have one),  then eth cable from modem to T/Cap in the WAN port (bottom port with an O sign above it)
    I believe when its connected up you may have to set up a wireless network. Follow the instructions to set up Wi-Fi and Network
    and then give it a password. The WiFi icon should appear in the menu bar where you can switch it on or off.
    Its been sometime since I set it with the help of Apple Techs so I might be a bit rusty.
    Alan

  • CRM 7.0 upgrade ( i5/OS PASE program not found or in use)

    Hi,
    We are upgrading CRM 5.0 to CRM 7.0 on iSeries (V6r1) and facing the following issue.
    When I execute this command
       STARTUP    SID(CD3)  TYPE(ABAP)  RESTART(YES)  DVDPATH('/Inst_DVDs/51036889')
            SAPUPLIB(SAPUP)  OPTIONS('jce_policy_zip=/Inst_DVDs/51036889/local_policy.jar')
    iSeries show this error message in "UPG_A_CD3" job log.
       Message . . . . :   i5/OS PASE program not found or in use. Path name is
           /usr/sap/CD3/upg/STARTUP.                                             
    Does anyone has any idea what could be wrong ?
    Thank you,
    Jack.

    Hi,
    We are upgrading CRM 5.0 to CRM 7.0 on iSeries (V6r1) and facing the following issue.
    When I execute this command
       STARTUP    SID(CD3)  TYPE(ABAP)  RESTART(YES)  DVDPATH('/Inst_DVDs/51036889')
            SAPUPLIB(SAPUP)  OPTIONS('jce_policy_zip=/Inst_DVDs/51036889/local_policy.jar')
    iSeries show this error message in "UPG_A_CD3" job log.
       Message . . . . :   i5/OS PASE program not found or in use. Path name is
           /usr/sap/CD3/upg/STARTUP.                                             
    Does anyone has any idea what could be wrong ?
    Thank you,
    Jack.

  • I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10.  Please help.

    I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10.  Please help.

    It appears that you may not have a properly installed OS X system.
    You must be connected to the Internet to reinstall OS X.
    In the menu bar, choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
    Select “Disk Utility,” and then click Continue.
    Select your startup disk from the list on the left, and then Repair Disk.
    After disk is repaired, select Reinstall OS X, then click Continue.
    Follow the onscreen instructions. In the pane where you select a disk, select your current OS X disk

  • For over 2 weeks now,i have not been able to use my itunes on my 2 laptops. it been giving me an error report of invalid signature.

    For over 2 weeks now,i have not been able to use my itunes on my 2 laptops. it been giving me an error report of invalid signature.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • The playlists I created have disappeared after updating to iOS 7.1. I have not backed up this phone to a computer - only backing up with iCloud. Is there a way to recover my playlists?

    The playlists I created have disappeared after updating to iOS 7.1. I have not backed up this phone to a computer - only backing up with iCloud. Is there a way to recover my playlists?

    Dictation in text message = Does not work
    Speaking with Siri via activated with Home button = Does not work
    Speaking with Siri with "Raise to Speak' = WORKS
    Voice Memos = WORKS
    Speaker phone on call = WORKS
    Voice control instead of Siri = WORKS
    I've tried hard reset, settings reset, wiping and reloading backup...nothing. Was hoping 7.1 might offer some respite, but no dice....
    I was hoping 7.1 would somehow solve it.

  • I just bought Adobe Acorbat DC, but it want old series No. or not allow me to use. the question is I have no that kind of No. the old one is a trial, even follow "find your series No" solution, my account & order history was blank, please tell me what sho

    I just bought Adobe Acorbat DC, but it want old series No. or not allow me to use. the question is I have no that kind of No. the old one is a trial, even follow "find your series No" solution, my account & order history was blank, please tell me what should I do now@ !

    this page shows the 'full' version (more expense ~$500 u.s.) and the 'upgrade' version (less expensive ~$200 u.s.), Plans and pricing | Adobe Acrobat DC
    if you bought the less expensive one you must own a qualifying (acrobat X or acrobat XI) version

  • HT4623 i can no longer access Safari.  It's not the phone because Apple just sent a new one and it still does not work.  I use the same computer to sync my ipodtouch5 and it has Safari.  My iphone4 does not.  What is the problem?

    I can no longer access Safari.  It's not the phone because Apple just sent a new one and it  (Safari) still does not work.  I use the same computer to sync my ipodtouch5 and Safari is operable.   However, Safari on my iphone is not.  What is the problem?

    That is the way it works. It designed to do that.
    In addition to everything else you have to this other person's computer you would have to move your complete iTunes library over also. Only then will it recognize youriTouch.
    Allan

  • HT201304 I have been trying for two weeks to log into iTunes using my Bank of America Visa Debit card but no progress. Is it that iTunes does not use debit card, I only have a debit card and  Not credit card, so does it mean I can't use iTunes .?

    I have been trying for two weeks to log into iTunes using my Bank of America Visa Debit card but no progress. Is it that iTunes does not use debit card, I only have a debit card and  Not credit card, so does it mean I can't use iTunes .?

    I believe if you haven't already setup an itunes account, if you have access to computer with iTunes installed , you can create an iTunes account on that computer with no credit/debit card and then just buy iTunes cards at your local retailer to get credits.

  • No Problem hooking up Vista laptop with WRT110 Wireless Router but can not get XP laptop to see it

    I purchased a WRT110 Linksys wireless router this afternoon and had no problem configuring it for my wired desktp and my wireless Vista laptop, but my Acer XP wireless laptop will not even see the network.  I have tried WEP, WAP, and no security, but I can see the neighbors routers but I can not see mine.  My XP laptop is an Acer 3680-2574 with a  Broadcom 802.11g network adapter.

    Is the SSID enabled on the router ?
    What is the firmware on the router ?
    Click here to check the updated list of firmwares.
    For information on upgrading the firmware on the linksys routers :
    http://linksysfirmwares.googlepages.com/upgradingfirmware
    For information on wireless security :
    http://linksysfirmwares.googlepages.com/wirelesssecurity
    C | EH
    linksyshelp.blogspot.com

  • Wireless router works - Airport not allowing connection

    I am unable to connect to the internet wirelessly using Airport. I have not changed any settings on the modem, nor on my MBP, however, I am now unable to connect wirelessly.
    Airport, when not connected using the ethernet shows full signal - I then try to open a webpage (using Safari) and the connection drops out immediately/ it will remain connected but Safari will tell me I'm not connected.
    I have searched extensively on this, and found some possible resolutions - resetting the SMC; removing, then adding the Airport connection/ the previous network connection; restarting the router/the MBP - I have tried everything and nothing seems to be working.
    I do recall having had this problem a while ago and it just sorted itself out after much frustration.
    Does anyone have an actual solution to this problem - perhaps Apple have made themselves aware of the problem and come up with an actual diagnosis and subsequent solution....
    Help please.....

    Erm, what do you mean by 'power cycle'?
    I have tried restarting everything, and still getting the same problem.
    When I first turn my MBP on it registers a full internet connection wirelessly, but then when I load up Safari it says 'no internet connection available'.
    This is tres frustrating.

  • END point URL for ESB Routing service says NOT FOUND

    Hi All,
    For the routing services in ESB, The link of WSDL is opening up fine, but the link of endpoint URI for the routing service is failing with the message below message. When i invoke the WSDL using SOAP UI, i get back the the same error message. I tried bouncing the server , but of no help. I also notice that slide directory ESB_Projects gives 404 error on any browser.
    So when i click below url for any of the routing service
    http://<hostname>:<port>/event/<systemName>/<serviceGroupName>/AddressStandardizeRS
    I get below error in browser-
    Not Found
    The requested URL /event/<System Name>/<Service Group Name>/<Routing Service Name> was not found on this server.
    Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777

    Check if the port of ESB in your server is open.
    I think that the port is: 7777
    try from ESB server:
    wget WSDLURI
    if you got the file then the port is closed.

  • Router IP address not found

    when I enter my router IP address into terminal I get:
    host 192.168.X.X
    Host X.X.168.192.in-addr.arpa. not found: 3(NXDOMAIN)
    On entering this I get
    $ hostname
    XXXXX-Mac-Pro-XXXXX.local
    But when I try to locate host on local I get same error message as IP address
    $ host XXXXX-Mac-Pro-XXXXX.local
    Host XXXXX-Mac-Pro-XXXXX.local not found: 3(NXDOMAIN)
    I'm not sure what is gong on or why, can anyone shed some light on this?

    Your DNS server does not have a name for your router's IP address.
    You DNS server does not have a name for XXXXX-Mac-Pro-XXXXX.local
    You can use ping XXXXX-Mac-Pro-XXXXX.local to get the IP address.  You can use other utilities to get the IP addresses of devices on your network, such as Bonjour Browser or WakeOnLan

Maybe you are looking for