"Hoot n Holler over IP"

I am referring to "Cisco Hoot and Holler over IP" document. I intend to present this to customer by installing Cisco 1760-V(with E&M) on their trading floors in 5 Asian location and riding on the IP WAN. However I need to think of some workaround here as the IP WAN doesn't IP multicast currently, but it seems the whole idea behind Hoot over IP is by IP multicast!
I wonder whether building full mesh "GRE tunneling" between 5 locations can help here. Also there seems to be no obvious definition in this application for "source", "receiver" or "RP" as in the multicast story.
Appreciate if you could shed me more light. Thanks.

Hoot and Holler over IP works inside GRE however solid QoS becomes a challenge. Your class-maps need to provide enough bandwidth for: "Codec Bandwidth + IP Overhead + GRE Overhead * 3" (The DSP will not mix more than the 3 loudest signals). We found that even with the right amount of bandwidth reserved, sometimes Hoot inside GRE would break up.
Also you won't need a full mesh, to make your life easy build your tunnels directly to an RP or an RP mapping agent.
In 2-way hoot and holler, everyone is a source and a receiver. You'll want an S,G for each location to ensure full 2-way communication for every location.

Similar Messages

Best practice - over issue of move orders in WIP

Hi Business analyst guru's,
I am working for a electronics manufacturing industry. I am trying to use work orders functionality across our organizations. I am stuck with a logic. Please advise me what you do in this scenario.
BoM : I have a a board assembly which requires 10 components say one of each component on BoM.
Setups:
all component's WIP supply type is push, Supply subinventory blank for all BoM components
Release backflush components is not enabled in WIP parameters.
one fine day I want to build 100 board assemblies and created the work order for 100, and released the move order through compoentn pick release form with transaction type as WIP component issue.
Now the warehouse picker went into warehouse to pick 100 of each component with a move order with 10 lines on it. 2 components are in reels which he can not split the reel and split reel can not be used in production floor (reel size is 1000). He can issue 1000 against on the move order
Now all the material went into production and build the assembly by 100 units. But two reels are left over with 900 of each. here I can do a WIP component return against the job.
But expectation is if I want to build another work order (say qty by 100 again) this 900 of two components should be available for the next work order. If I do component pick release, the move order should request only 8 components.
Is this possible? If not what is the best practice to avoid WIP return transaction and avoid splitting the reel size?
Thanks
Veerakumar

1) If you have these items as Push, you will get a move order line for 100. Therefore, even if you move a whole reel the floor, only 100 will get transacted out of warehouse. Someone will have to manually transact additional 900 to the floor otherwise your inventory accuracy will go for a toss.
Have you considered making those items pull?
1) As and when the worker needs reel, he raises a signal. (different ways of doing this - could be Oracle kanban, could be a visual signal, could be a holler - whatever works for you)
2) You transfer 1000 to the fllor
3) As and when jobs complete, the 100 units get issued to work order
4) Whatever is left over (say 800 after the 2 work orders) and not needed is transferred back to warehouse and you do a subinv xfer transaction.
2) If you can't make them pull, then you will be forced to move the 900 back to warehouse when the first job is done.
3) If you can't make them pull, you do a component pick release (CPR) for multiple jobs at a time? You can group your pick tickets by destination operation. This way, upon component release, you will have 1 move order line with qty =200. The picker transacts the move order line for 200 and a subinv xfer to WIP for 800.
4) Here is the best case scenario. Don't know if your floor layout or factory processes will support this.
You make the items pull on BOM. You have a temporary holding area on the floor (aka supermarket) . When operator needs the item, a visual signal is raised. The supervisor (aka spider) checks the supermarket and brings a reel to the operator. Upon completing the job(s), whatever is left of the reel goes to the supermarket. Once the reel is no more needed for the day (or week or month), you do a subinv xfer from supermarket to warehouse of whatever is left. The components get issued to work order upon completion (of operation/assembly).
Do the best you can out of this scenario. :)
Sandeep Gandhi

Sdk hootie/intercom

just started looking at hootie and intercom for cm. I'm a CM guy and by no means a sdk guy so please be kind ;-)
Trying to accomplish some sort of broadcase local page over phone such that receptionist can hoot to all at same time and say "joe you have a call parked on 1233".
Looking at hootie it seems that you have to be into the app for it to work unless i'm missing something as i do not see where you assoicate the phones to the hoot group as there is no indication in the .asp files on how to do this.
Just want to do this locally not across the wan.
Is intercom better suited for this type of thing or would hootie do the trick as i'm not sure how it should be and can be used.
Thanks,
Paul the cm guy.

forgive my ignorance. I get the idea but should i go with the hootie or the intercom sample app as a starting point.
i like the hootie app as it is broadcast based and gets the job done.
Just don't know how to make everyone listen without actually selecting the group.
if you could dumb it down a bit i'd appreciate it.

Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

Hi !
I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
I can ingest audio with video using log and capture, then I know my card and my cables are working.
I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
I've been looking on the BM website, but I found nothing.
Can you help me ?
Thx

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

Jabber call to voice mail fails with fast busy over VPN

I have an issue that I ran into with CIPC phones over a VPN. If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail. I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail. I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail. Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure). WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711. With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
1. CIPC and Jabber share the same line
2. VPN established and CIPC optimised for low bandwidth un-checked
3. Over the same VPN the CIPC phone can leave a voicemail
4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
5. Voicemail environment is Exchange-UM over SIP trunk
6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise. Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711. The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.

We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year! Every time I call in to report it they 'escalate' the issue but it never gets resolved. The problem seems to be in the initial connection. Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal. I get the same message when I call back: “I’m sorry – that account is in use at this time. Please try again later!” I have even called in with my cell phone and get the same message! I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later. If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.” This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!! I wonder how many people have the problem and just don’t bother reporting it because of the hassle? When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!! NEVER let them talk you into that!!! It’s their problem and they need to fix it!!!!!!! I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract! Good luck if you have Verizon………

I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open. I received an error message saying they are improperly downloaded or came as an email attachement which is not the case. Please advise

They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen. I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
doc.
The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
The reader version is I believe the most current, I always update when prompted. OS is Windows 8

How can I make sure my history doesn't expire and that I can transfer over places.sqlite?

There's probably alot of questions on this subject asked already but I've gone over just about all of the possibly relevant ones that've been already asked and I still can't figure out what to do. I'm trying to move my complete history from an XP Firefox profile over to a Windows 7 profile on another computer. Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one? And after the file's in the right profile will I be able to just view all the sites I viewed on the old computer on the new one's history dialog box? I only am transferring my XP history to my Windows 7 because I want to look at stuff several months back and it keeps expiring on me, even to the point of getting rid of a month of history a week or so ago. This brings me to my other point, I keep up fairly well with updating both of my Firefoxes but recently (and I think this was way, way after they updated the browser so the history isn't set to expire by days anymore) the history just isn't reliable anymore. My XP will not only expire older months of history faster and faster it seems, but individual websites at the end of each month will actually disappear as I view new ones, instead of it all staying in there and just expiring each old month as a whole. Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP. The thing is for a very long time my Windows 7 would keep every ounce of my history that I kept on it, unless of course I went through the Clear History process myself. Now it seems to be slowly deleting it and having all the other problems that I mentioned earlier. I've got 592 GB out of 931 GB that's free space on my Windows 7 that I want to transfer my XP history into, and my Control Panel System panel says I've got 8 gbs of RAM in total. If I need to get some other information on RAM mention how to do that if you could. So in total, how can I transfer my XP history over into my Windows 7 so I can view all the sites I viewed on my XP in my Windows 7 history panel, as well as view all the old expired and/or manually deleted history on my Windows 7, without worrying about whether it will expire itself while I'm viewing it and writing down the relevant URLs that I need to know about. If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated. Thanks to all here. (:

Hello Saethwyr99,
''Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one?''
you are correct : [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile#w_your-important-data-and-their-files Your important data and their files]
''Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP.''
from Firefox 4 and above versions there is not a time limit for the history.
Firefox determines automatically how many pages can be kept '''without affecting the performance.'''
''as well as view all the old expired and/or manually deleted history on my Windows 7''
i think this in not possible
''If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated.''
check the next add-on : [https://addons.mozilla.org/en-us/firefox/addon/expire-history-by-days/ Expire history by days]
thank you

UCCX 10 open and close over-ride

I am trying to find a way to into create a script to have it so that an supervisor can call a number and over-ride to close or open option.
does anyone has a sample script to share?
thanks

There are many posts on this topic here, and some good script examples here:
Cisco Unified Contact Center Express Script Repository 9.0(2)

Can I merge several different Verizon plans (different family members each have own plans) into one plan (i.e. can I take over all their lines), if all lines on all plans are on Edge?

I was originally told by Verizon that if I joined, I can eventually take over the lines of various family members. Now that I've joined, and my family members all upgraded their phones and are on Edge, Verizon is telling us that we can't merge into one plan (because Edge lines can't be transferred to another account).
Is this true, and, if so, what is my recourse since I was lied to.

Well, yes and no (as far as being lied to). I asked on several occasions (I have the chat transcripts to prove it) if there would be any issue if the lines were all already on Edge, and was told each time that under no circumstances would there be any issue. The latest being today (I know it's after the fact, but I wanted proof that this is what the chat people are saying). I asked "I have currently have an account with 3 phones on Edge. My brother and his wife, and my parents, also have plans all on Edge. I would like to 'take over' their lines. I want to make sure there is no issue with the Edge plan and that I can simply 'take over' their lines with no problems." I was told "Yes. That would be correct." Again, this is what I was told in the past as well (my original post didn't make clear the timing of the chats and upgrades to Edge..). Every time I chatted I mentioned that the accounts were going to be on Edge or (later on) were already on Edge. Even before my family members upgraded to Edge, not one single chat or phone representative (and my brother asked the same thing in a store) mentioned NOT to upgrade to Edge because it couldn't be transferred. Everyone just said yep, no problem. The ONLY reason I even joined Verizon (I was on Straight Talk) was because of the More Everything and Edge plans (we wanted a family plan with 6 people and over 10GB so we'd each save $25/line). Otherwise I never would have joined Verizon and my family wouldn't have upgraded either.

HT1751 I need to uninstall and reinstall iTunes (it won't let me update). So, how do I copy or back up my iTunes library of over 1,500 songs? Can I use a Flash Drive to do so?

I need to uninstall and reinstall iTunes (it won't let me update). I have IE 8 on Windows XP, and iTunes 10 something. In my Program files list I see iTunes and iTunes (2) and even iPod and iPod (2) where a tech had to back up and do this for me before. I'm just trying to fix it all. I keep getting the "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below." I can even run a search and find the folder, but it gives me the same error message. I was planning on using the Microsoft Fix-It tool to help uninstall then Reinstall iTunes. But I need to backup my library. So, how do I copy or back up my iTunes library of over 1,500 songs? Can I copy the folder to desktop or can I use a Flash Drive to backup my music? I don't want to do anything until I know for sure how I can backup my songs, and then reinstall them into iTunes. Thanks for any help.

Ok, thanks that helps. I don't have an external hard drive though. What about backing up through 'the cloud'? I'm just wondering since my husband syncs his iPod to the PC through iTunes and he's worried that he will lose all the songs on his iPod if the library is lost from iTunes and he tries to 'sync' it up again. I'm not exactly sure how to 'copy the entire iTunes folder' either. I kinda suck at this unless I have step by step instructions, which I haven't found yet on iTunes help or other sources.
The only way I know how to back anything up is by going back to a restore point, etc. (as stated before, we don't have an external hard drive.)
Thanks for the info.

Can I transfer pictures from one iPad to another without going over iTunes?, can I transfer pictures from one iPad to another without going over iTunes?

can I transfer pictures from one iPad to another without going over iTunes?, can I transfer pictures from one iPad to another without going over iTunes?

Yes, use 3rd party apps like Photo Transfer App.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/69507ce7f854c405f54 77bea99f4d498.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/79b3173fda7b6a6e148 5b463198f6acf.jpg

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

My wife and I have made many purchases over several years on seperate accounts, how could we join them into one account, without losing everything?

My wife and I have made many purchases over several years on seperate accounts, how could we join them into one account, without losing everything? We both use Iphone 5's and share an Imac at home.

Purchases using one Apple ID cannot be merged or transferred to another Apple ID. Purchases are forever tied to that Apple ID used. You have to decide which Apple you want to use for purchases and stick to that Apple ID so that you can share: Settings > iTunes & App Stores > Apple ID : > use the same Apple ID here to share purchases.

Can multiple iphones with multiple itunes accounts be synced to one mac keeping apps seperate over the air?

We have about 20 iPhone's in our environment and syncing and updating them has become a real chore lately. Everyone has their own iTunes account and apps that they use. Is there a way that they can be synced, backed up and updated over the air (not iCloud) to the same MAC? Because we are in the financial sector we will not be able to use iCloud. Should we look into some sort of private cloud and if so; any suggestions on how to accomplish it would be greatly appreciated.
Thank you in advance,
J

We have several macs, several ipods, a couple of iphones, several itunes store accounts. So far no problem. You might have to share passwords if you want to share content. I think iStore accounts can only be used on up to 5 computers. We have 7, so have to be a little careful about that. I don't think there is a limit on how many iDevices can be used with one account. I also don't think there is a limit on how many accounts can be used on a single computer (might be wrong about that). You have to be logged into the iStore to download content, and your computer has to be registered with the account to use the content, but once it is on, and registered, syncing to an iPod is not a problem (you do not have to login in again for each account the content was purchased from). I'm just glad I only have two kids, and one wife - things could get trickier in a big family with . . .

HT202667 Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get it transferred over from her Home Sharing account to mine so that I can use it with my PC?

Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!

As Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
regards

"Hoot n Holler over IP"

Similar Messages

Maybe you are looking for