Hope it may help our forum

I guess it may help our forum in some way
http://realhomeworking.com/nokia-ovi-suite-software-updater-error-1327-invalid-drive-g/
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

I'll keep updatin'
http://www.nokiausers.net/Ovi/Desktop-Ovi-Suite-Updated-to-V2.0.1.35.html
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Similar Messages

Hope someone can help - Lightroom not working...at all...nothing....

I have tried installing about 20 or so times now and still cant get any thing at all when i launch the application - its likek it freezes. Something somewhere is missing or corrupt in my mac or the dowmload i downloaded and here's really hoping someone can help.
I have been using the beta since beta 1. This morning i downloaded the V1.0 and went through the usual steps on a mac. Launched the programme and got the option screen of entering a code or trying for free for 30 days.
Chose the free trial as my serial code had not yet been sent.
The application seemed to start and then said it was going to upgrade/update (or similar) my old library and this may take a few minutes. Fine - I've got all day - no worries.
5 hours later and not a whole lot appears to have happened other than Lightroom being frozen and I cant do much. Force quit ensues and an attempt to relaunch the application.
It launches and I getthe start up Window that lists all teh people who made it...but my cursor just goes into spinning ball mode an dnothing happens. This has now gone on about 20 or so times. I have tried removing the Lightroom with Appzapper and then re-installing the original beta followed by the new download....still nothing but a frozen lightroom
Anyone got any ideas - it must be something to do with my mac as everyone else seems to be using lightroom ok... and i'm desperate...seeing as i've been using it since beta 1
hope someone can help??

Another thing to check is the permission settings on the Lightroom application and on the folder where your library lives (or will live, if you're making a new one.)
The Lightroom application needs to have an owner who has read/write permission on the library folder's location. Normally this owner will either be your own user ID or the "system" ID -- check by doing a command-i and seeing what shows up under the 'Details' section of the 'Ownership and Permissions' section.
I was having exactly the same problem you described until I checked and discovered that for some reason, Adobe's Installer had installed Lightroom with a strange owner ID that only had read permission on my library folder's location. Since Lightroom needs to be able to both read and write to the library when it starts up, it was launching and then just sitting there doing nothing.
I changed Lightroom's owner to 'system,' then made sure that the 'admin' group (of which 'system' is a member) had read/write permission on my library folder's location. After that, Lightroom launched fine.

Sorry, Flagfox has encountered a problem. Please copy the report below and post it on our forums with a detailed explanation of what you were doing at the time so we can attempt to fix your issue. (English please) Flagfox version null (missing IPDB!)

Sorry, Flagfox has encountered a problem. Please copy the report below and post it on our forums with a detailed explanation of what you were doing at the time so we can attempt to fix your issue. (English please)
Flagfox version null (missing IPDB!)
ERROR MESSAGE: Fatal Flagfox startup error!
EXCEPTION THROWN: TypeError: ExtensionManager.getItemForID(id) is null
STACK TRACE: startup()@file:///C:/Documents%20and%20Settings/Vanessa%20Ecret/Programdata/Mozilla/Firefox/Profiles/9eyewkfc.default/extensions/%7B1018e4d6-728f-4b20-ad56-37578a4de76b%7D/chrome/flagfox/modules/flagfox.jsm:40
([object ChromeWindow])@file:///C:/Documents%20and%20Settings/Vanessa%20Ecret/Programdata/Mozilla/Firefox/Profiles/9eyewkfc.default/extensions/%7B1018e4d6-728f-4b20-ad56-37578a4de76b%7D/chrome/flagfox/modules/flagfox.jsm:160
Flagfox_loadForThisWindow([object Event])@chrome://flagfox/content/overlay.xul:16
BROWSER: Mozilla Firefox 3.6.6/20100625231939 (Gecko 1.9.2.6/20100625231939) using locale en-US on WINNT x86-msvc
This error and a Flagfox preferences dump has been sent to Tools -> Error Console. Please report this and any related errors so we can investigate your problem. Conversely, if you don't report this then it probably won't get fixed.
== i was update

Sorry, the Flagfox extension has encountered a problem. The following error output and a Flagfox preferences dump has been sent to Tools -> Error Console.
FLAGFOX VERSION: 4.1.x (missing IPDB!)
ERROR MESSAGE: Fatal Flagfox startup error!
EXCEPTION THROWN: TypeError: addon is null
STACK TRACE:
(null)@resource://flagfox/flagfox.jsm:70
safeCall((function (addon) {try {FlagfoxVersion = addon.version;var ip4db = addon.getResourceURI(IPv4DBfilename).QueryInterface(Components.interfaces.nsIFileURL).file;var ip6db = addon.getResourceURI(IPv6DBfilename).QueryInterface(Components.interfaces.nsIFileURL).file;ipdb.init(ip4db, ip6db);checkIPDBage();ready = true;} catch (e) {handleStartupError(e);}}),null)@resource://gre/modules/AddonManager.jsm:48
([object Object])@resource://gre/modules/AddonManager.jsm:897
AOC_callNext()@resource://gre/modules/AddonManager.jsm:118
(null)@resource://gre/modules/AddonManager.jsm:892
PL_getAddon("{1018e4d6-728f-4b20-ad56-37578a4de76b}",(function (aAddon) {if (aAddon) {safeCall(aCallback, aAddon);} else {aCaller.callNext();}}))@resource:///modules/PluginProvider.jsm:79
callProvider([object Object],"getAddonByID",null,"{1018e4d6-728f-4b20-ad56-37578a4de76b}",(function (aAddon) {if (aAddon) {safeCall(aCallback, aAddon);} else {aCaller.callNext();}}))@resource://gre/modules/AddonManager.jsm:76
([object Object],[object Object])@resource://gre/modules/AddonManager.jsm:888
AOC_callNext()@resource://gre/modules/AddonManager.jsm:124
(null)@resource://gre/modules/AddonManager.jsm:892
(null)@resource:///modules/XPIProvider.jsm:3047
([object Array])@resource:///modules/XPIProvider.jsm:4864
(0)@resource:///modules/XPIProvider.jsm:3867
BROWSER: Mozilla Firefox 7.0.1 (Gecko 7.0.1 / 20110928134238)
OS: Windows NT 6.1 (WINNT x86-msvc windows)
LOCALE: en-us content / en-us UI / en-us OS
Select and copy the error report above. In order to fix this problem for you and others, please read and follow the troubleshooting and bug reporting instructions on the Flagfox support forums. Please post an abundance of information with any error reports, namely what you were doing at the time that may have triggered this. (English please)

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4: - I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4:
- I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet I need to shut down and restart CS6.
- Camera RAW: if I change any setting in Camera RAW (except exposure), having first optimized the exposure, the exposure will automatically return to zero. Sometimes when I've set exposure and cropped the picture in Camera RAW Plug-In, the effects are lost just by opening the picture in CS6.
- Sometimes if I crop a picture in Camera RAW, it may be impossible to open it again from Bridge!
- I cannot do lens corrections in Camera RAW, at all. The Camera RAW comment is that "it cannot load the correct lens type". Why?

Are you writing that when you select a large number of images in the bridge like a hundred thumbnails when you then use Bridge menu Tools>Photoshop>Contact Sheet II that Photoshop only produces a single contact sheet for the first few thumbnails and fails to produce additional contact sheets for the other selected thumbnails? Photoshop contact sheet II script should create as many contact sheet as needed for the numbers of thumbnails selected. Perhaps the script is hung or you have exhausted your machine resources.
ACR Crop tool does not crop the RAW file it records crop settings to be used during the conversion process. Camera RAW DATA is not altered. The only changes made to RAW Files is ACR Metadata may be added. Anything you do in ACR can be un-done in ACR. If you can not open a RAW File in ACR the Files is either corrupt or from a new camera ACR does not support yet. ACR should not corrupt RAW files.
If you do not have a lens profile for ACR I think you should still be able to do lens correction manually in ACR.
Some of what you write I don't follow could you post some screen captures of your problems often a picture helps.

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

I have the ipad3,and I plug my charger in to charge my ipad and it comes up with the charging battery sign charges for a few minuets and then the white apple sign loads up into the screen then my ipad goes dead again,I hope someone can help:)

I have an ipad 3, when I plug my charger in the ipad comes up with the sign to say it is charging and then the apple sign loads up as if the ipad is about to come on,but then the ipad just goes dead again,I've tried holding both buttons down and I have also tried charging it over night but still nothing is working.
I hope someone could help:)

When you say you tried holding both buttons, did you mean you held both the power and home buttons until the apple logo appeared, ignoring the red slider if that appears? If so, exactly what happens?
You may need to take the iPad and charger to an Apple store genius bar to be tested by the techicians.

Hi guys I hope someone can help me

Hi guys I hope someone can help me I have a problem with Apple compressor 4. Everytime I use Apple clusters it works for the first time. And when I try to use it again it disappears. I have to delete the program and reinstalled it and then I can activate the clusters again does anyone know why this happens.

There was just an extensive discussion about clusters here. See if there is anything helpful it that may apply to you.
Open up Qmaster from the Compressor menu toolbar. Post screen shots of the Setup window and Advanced window.
Russ

I have 2 problems I hope someone can help me with.

As the title says, I problems I hope someone can help me with as I don't know who else to ask for this.
1. I tried to pre-order Dying Light for the Xbox One and during checkout the system cancelled my order saying that the store stock had been spoken for. However, I went in once the game released to the same store and was able to purchase the game no problem so in effect I just missed out on my $10 pre-order certificate.I wanted to pre-order but it wouldn't let me - I have never seen this error before.
2. I took advantage of the $39.99 12+1 month Xbox Live Gold gift card you had on sale yesterday. Only the Halo one was abailable at my local store so I ordered 2 of those for pickup. I got home and used the cards and it was only for 12 months not 12+1 as it still says on the website here:
http://www.bestbuy.com/site/searchpage.jsp?st=3878002,+8972116&_dyncharset=UTF-8&id=pcat17071&type=p...
Is there a way to get the extra month advertized?
Thank you!
Solved!
Go to Solution.

Hello also_nadrag,
Thanks for writing in, and thanks too for being a My Best Buy member. We appreciate your loyalty. I'll be happy to talk to you about your recent online experiences.
From the sound of things you may have waited too long to attempt a pre-order for in-store pickup for Dying Light. As the order was not able to be processed, I'm afraid we will not be issuing the $10 certificate.
The product description on the Xbox Live Halo card is incorrect in labeling this item as including 1 extra month. As the image online and packaging indicates, this card has an extra bonus for Halo: The Master Chief Collection. We have reported the description error and I hope it is corrected soon. I am sorry for any confusion this may have caused.
Please visit us any time with questions or concerns.
Sincerely,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

My iPhone stolen and I download find my iPhone on it also I can sea it online but I can't locate it so please help me .. What should I do . I heard apple support can activate the GBS and send it to my e_mail . So I hope they can help me with that ...

My iPhone stolen and I download find my iPhone on it also I can sea it online but I can't locate it so please help me .. What should I do . I heard apple support can activate the GBS and send it to my e_mail . So I hope they can help me with that ...
Best wishes ..
<Email Edited by Host>

These are user-to-user forums, I've asked the hosts to remove your email address from your post.
Apple and/or iTunes support can't locate it for you, only you can potentially locate it via http://icloud.com on a computer or Find My iPhone / Find My iPad on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPhone disabled on it.
If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

Morning all. Hope you can help. Basic question for a newbie.

Is there anyway I can check if a form is in QUERY_ONLY mode??
Basically I have a button and I want it to do different things depending on if the form is query only or not.
Really hope you can help me...
thanks alot...
Ben

Whoa. After looking at that I'm still confused.
We have a form on our system that can be called in 2 different ways. Calling the form normally and calling it in Query only mode depending on the user roles.
The form we are calling can then call about 10 other forms. However we want it so that one particular form can't be accessed in query only mode but can be accessed in normal mode.
I'm thinking about just setting a global when calling the main form depending on if it's in query only mode or not. Then checking the global when trying to call to subsequant form, if the global is set to "QUERY_ONLY" then give an error message telling the user is not allowed to view the form or running the form it the global is set to "NORMAL". But didn't know if there was a better way to do it or not.

HT1349 Mobile phone somebody have stolen or lost . How can I turn it off. I hope you will help me.

Mobile phone somebody have stolen. How can I turn it off. I hope you will help me.

Hi حسن الحسن,
If you have recently had your iPhone stolen, you may find the information in the following article helpful:
Apple Support: What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
Regards,
- Brenden

Help by Forum Mods solved slow speed

Thank you to the replies in the super slow thread where I posted. A big thank you to Stephanie a Forum Moderator who guided me back to a better service and speed than before the issue started.
If you have lost tithe good broadband speed you once enjoyed I recommend you follow the guidance of the Forum Moderators. Like me your frustration will hinder any progress and patience is needed, two weeks in my case.
I had 6 Mbps in November, then down to .25, I blamed BT for capping throttling me, and raged at those on the forum that insisted Bt don't do this ( deliberately ) vented my anger at BT vowing to move to Sky (which I will not).
here is what I know now....
I caused my own problem, I switched the power of the hub when away for a week, the exchange assumed a power cut which would do the same and automatically registers a fault on my broadband cuts the speed to 0.25mbps ( No human BT dictator flicks any switches or choses me maliciously ). The automated procedure of the computers at the exchange is now to monitor my BB connection and if there are no more outages or faults gradually bring the speed back up. For some this will happen over 3 to 5 days. I never had more than 3 hours without dropping tithe connection so that was not going to happen.
I had two unforeseen further problems, a fault on my voice line, BT eng summoned by the Forum Mod, and faulty connection sorted. Still the BB connection was dropping inside a 12houri window. I noticed that there were now as many a 5 Bt hubs and 3 others being offered by my wireless connection. Stephanie then guided me on changing the wireless frequency of my hub, to avoiinterference from my neighbours hubs. Problem solved.
I now have 10.5 Mbps and a very stable connection, I was able to move the hub to the end of an extension ( now I understand the Adsl filter) and use an Ethernet cable to connect to the Sky box for on demand. droop romp or lag on Netflix from the Xbox.
A long post but I hope it will help the frustrated understand the papered problem can be fix and the team here can help, but patience is required.
Seasons Greetings to all the forum and especially the Moderators and Team.
ps. If you are going to correct my description of what happens when the exchange drops the speed don't be to techy, not all BT customerthrill understand.

It is a regular problem i am afraid and will only get worse the more wireless routers that come on line don't worry about the predictive text it winds me up as well
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

My husband was helping our daughter set up an apple id. She entered her e-mail address incorrectly, but didn't realize it until AFTER they had entered a credit card number. How can we cancel the incorrect e-mail address account?

My husband was helping our daughter set up an apple id. She entered her e-mail address incorrectly, but didnt realize it until AFTER they had entered a credit card number. How can we cancel the account with the wrong e-mail address?

iMac model?
Mac OS version?
Both can be viewed fby doing "About this Mac" from the Apple menu at the left end of the menubar. The OS version will be pretty obvious; posting what the window says about your processor will help us figure out what model.
I ask becasue about 60 percent of the posts here are about newer models than the pre-2006 iMacs this forum serves.
Not your fault if you found the wrong forum--Apple's labeling is as clear as mud!

Emails archive instead of deleting. how do i stop this and where are these archived emails held? hope you can help

My ipod touch has just started to archive my emails rather than delete them. Is this the same thing? If not how can I get it back to normaland just delete unwanted emails at my request? hope someone can help, thanks and kind regards, Jane (france)

This previous discussion may help:
https://discussions.apple.com/message/17052802#17052802

Great Video Talking About Our Forum at CES 09

Hi HP
A great video was put on YouTube from CES this week that mentions our Forum Environment and particularly mentions our great group of experts here helping each other.
Congrats to everyone, and THANKS!!!
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!

Good news
The windows side is much more active than the mac side and has a few very
active hosts. I mentioned the windows faqs in a recent post, they are really
very good. Some of the items are windows specific, but most are not. I am
glad there is a link, But for those few who acess via newsreader, they are
not acessable. I would advise everyone to check them once in awhile, the
last time I did I found my name in the credits.
It is also a good idea to check out the windows forum. There are quite a few
very helpful people. And many pagemaker issues are not platform specific.
Warning! People on the windows side will also recommend Switching to
Indesign on occasion.
Jay

Hope it may help our forum

Similar Messages

Maybe you are looking for