Hopping-skipping during play-back

Working on a 20 minute project with at least 200 photos , transitions,effects.
music, 3 7sec clips. When I replay it to verify and make corrections it skips, becomes choppy, not smooth flowing like it should be. This my 6 project like this and this is the first time it ever happens. Can anyone help me I want to finish it and it so it will play properly.
Any help will be very useful . Thanks

I'm having the same problem with a 37 minute project. FIrst I thought it was from the cfx plugins I bought to change the aspect ratio and have more control over titling. But even in sections where I use no external plugins, IMovie just seems to rebel if, for instance, I have a lot of audio edits (putting in roomtone, using extracted audio a lot, etc) or a lot of video cuts with VO. Don't know if it has anything to do with the size of the project.
But it's very inconvenient to break it into 3 or 4 projects because then I have to keep exporting and importing clips from one part to the other. This is very annoying especially since there's so much cool stuff you can do with IMovie when it's cooperating.
Any suggestions would be much appreciated.
spb

Similar Messages

How can I stop music from skipping during play

I do not like iCloud. How can I convert back to the previous version? If not available, then how can I stop songs from skipping during play? (Only started happening when iCloud installed).

Hi,
Exits for T/C PA40 area:
Exit Name           Description
HRPC0001            HR: PC download authorization
HRRPAI01            User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
PARA0001            Enhancement for Determining the Number of Periods
PARA0002            Enhancement for Calculating Annual Salary; IT0008,14,15
PBAS0001            PA: Pers.Admin./Recruitment: Default values and checks
PBAS0002            PA: Enhancements for Personnel Administration - Menu
PBASRP01            PA: User exit distributed reporting
HRPBAS01            User exit for personnel number validation
I think exit PARA0002 will work for this requirement.
for confirmation put BREAK-POINT in the include and do the action with PA40 t/c, if cudrsor goes to the BREAK-POINT stmt, the logic to write si
if screen-name eq 'aaaa'. (for exact names can go for f1 help>tech attribts>)
if filed-name eq (for example:) anzhl
if anzhl is initial..(u can go for writing all the fields with AND operator)
message: e
endif.
endif.
endif.
I hope just idea will help you.
Regards,
Thrilleswar

Sound keeps buzzing during play back

I have recently bought the HP Pavilion lap top and when I have come to listen to tracks either those on the hard drive or via apps like Spotify the sound occassionally stutters and is buzzing during the songs, any suggestions on how to fix this problem?
thanks

Hi Denzel6362, sorry to hear that you are having a issue with buzzing during play back on your computer. What is the exact model number of your computer? On the bottom of the computer you will see a white sticker, you will find the product number on he sticker by a bar code. Hope to hear from you soon so we can get this issue resolved for you.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Sound problem during play-back

Dear friends
After recording images with my MSI TV-Tuner card, i cant get any sound during play back. First i had Win-Amp installed on my system that i thought may be it is the cause of the problem. After uninstalling the win amp, again the problem existed. Even i have installed the Beta version driver of my MSI tv tuner but i hadn't any success in solving the problem .
If somone can help me to solve this i will be appreciated.

make sure you have the recording input set correctly in your settings (look under Device options)
however your tv tuner is connected to your soundcard (eg Line-IN) then this should be set accordingly

Export QuickTimes freeze and skip while playing back

I’m new to Motion, and growing concerned. I’ve purchased and learned Motion for a specific job. I’ve built some very cool elements with many layers. I’ve grown accustom to the slow performance, skipping etc. while working on the project. That’s ok.
What concerns me is exporting. When exporting Draft or Best versions, most all the time the movies freeze or skip while playing back, either in QuickTime or Final Cut Pro
When exporting I select Export, as QuickTime Movie, using current project settings
I’m using Motion 3.02-HDV 1080-60i project, 10 seconds long
4x 2.5 Ghz G5
5 GB Ram
I would appreciate and advice or tricks to be able to export a decent version of what I’ve built.
Thanks!

Andy, thanks for your help.
I have 30 gigs available on the hardrive. The file exports are usually less than a gig. I have a GeForce 6600 card.
When I select export setting from “current project settings” it uses the Animation codec and plays with freezes and skips. But with in that video that does play well, it plays very clean and clear.
When I change the export to 1080i60 at best quality, I’m guessing it uses the HDV codec? It does play back with out the skips and freezes. But it looks like **** with horizontal lines in titles stripes etc.
Is there a way to make the 1080i60 video playback clean?
Thanks!

CD-Rs I burn on my iMac skip when played back

Hi there, when I create songs in Garageband and then "send to iTunes" and burn the disc, many of the songs skip randomly. I've tried playing back the disc in multiple stereos and computers, and it's the same thing. The discs are not scratched. What could be the problem?

Two things to try:
Unless you're using a high quality brand, change the brand you're using (the Superdrives are very finicky about the media - mine only likes Verbatim), and
burn at the slowest speed available (which cuts down on burn errors).

Final Cut Pro Lagging during play back

when i start a new project FCP runs great but after i start adding more clips and rendering and saving my preview play back is so sluggish to the point that the video stalls and the audio keeps playing for a couple seconds then stops.
i dont know what i did if anything but FCP used to run great all the time. this all just started a couple weeks ago. even short projects if i save it to work on it another day when i get back to it, it runs sluggish. if i skip through the project with the mouse i usually get the beach ball. does anyone know whats going on? all my other programs are running great. my memory status is OK

im editing music videos. they are about 4 minute mp4 files saved on my hard drive. my rendered files & scratch disks are set to save on an external hard drive.
the videos i buy and they are MPEG-4, 640x480, H.264 AAC (saved on my hard drive)
im exporting from FCP, using quicktime conversion, and saving as MPEG-4, 640x480, AAC H.264.
all im doing is placing a logo in the lower right corner through the duration of the video.
sometimes i add 5 or 6 of these 4 minute videos to make a longer music video mix.
the only thing i have connected to my laptop is an external hard drive. no cameras or anything else.
i been doing everything the same for the last 6 months. this lagging just started last week.
also when i want to render my project it takes about 2 hours for a 4 minute video. same thing when i export.
i tried trashing preferences to start over and it still the same sluggish preview play back.
any ideas?
im dieing here
MacBook Pro OS X 10.6.4
Processor: 2.33 GHz Intel Core 2 Duo
Memory 4GB 667 MHz DDR2 SDRAM
Final Cut Pro 6.0.6

Songs skipping during play

I recentley upgraded my old computer with a newer used one that runs fine, but when listen to the songs that I have imported from the new Pc to the ipod every so often they skip or some type of glitch during play and also on itunes.My old songs play fine.Any suggestions on how to cure this or what might be the problem?
Thanks in advance

You probably also have the corrupted-skipping song problem. If it is the same songs that always seem to skip, they are probably a result of a bad download.
Delete the bad songs (keep track of them separately though through a list)
Go to "Purchased"
Bottom of page "Download Previous Purchases"
Find the album you deleted the song from under either "All" or "Not on this Computer"
Look for the cloud icon with the download arrow in it. Click it, NOT THE X!
This will redownload your songs (it might say you are buying it, that's the default screen for downloads)
Check your redownloaded songs.
Hopefully this will sort out your problem, it fixed the skipping song problem I had.

Airtunes - music cuts or skips during play

Just installed the upgrade to 7,32 (6) and my music skips when playing on remote speakers (perhaps on Mac too, but haven't tried that yet. Really random skips - some songs only, sometimes often, sometimes not.
Library is on LaCie external drive. Set-up worked fine with previous versions.
Thanks

I also have this problem. It is infrequent, and solving it is inconsistent. sometimes simply restarting itunes is enough, sometimes a computer restart, router restart or force quitting itunes is required to stop the skipping.
It's making my wireless music listening experience less than enjoyable.
I am streaming my music to a airport express connected to an apple ipod hi-fi from a lacie firewire 400 7200rpm hard drive. through itunes obviously. and yes, i have set my buffer to large.
thank you for any suggestions you may have for me, ben

Crackling, clipping sound during play backs/recordings? No tracks are actually clipping..

Hello, I've recently got GarageBand 10.0.2 and imported an old GB file to work with in the new GB.
When i play back the recording it seems i get a crackling, clipping type of sound although no tracks are actually clipping?
i think it may occur when i switch to the new presets but the clipping/popping noises come and go with ever play back.
Any idea?
-Payam

TheodoreG wrote:
A good bit-depth calculation would be useful for verifying the resolution of a recording, especially when it comes from a source that may have done it incorrectly. For example, an unfamiliar combination of hardware, software, and their settings might appear to deliver 24-bit recordings (observed from file size) but in fact deliver upsampled 16-bit audio.
If you end up with a recording that has a sample bit depth size that is the equivalent of 24 bits, you couldn't tell anything about the real source of it anyway - it could be upsampled 8 bit, for all you could tell from those numbers. And that's all it does - takes a guess from the sample depth.
I deal with the audio I get, regardless of what any form of analysis says about it, because generally there's nothing I can do about it anyway. And that's why I don't think there's any value in the information - I treat the audio and save it as 32-bit FP - end of argument!
And, er, exactly which plugins have you discovered that are not giving you back what you sent them, or something better?

Final DVD made in iDVD skips when played back

Made slide show in Final Cut Express. Exported as a QT movie and placed it in iDVD. When I play it back it pauses and skips in certain spots. I also have video on this movie and it paused on it also.

The usual causes would be poor media (like Memorex or TDK) and/or burning at a high sped (8X or higher). Use Maxell or Verbatim and burn at a max of 4X.

Video frames are heard during play back in the audio line (but not on the DVD)

Another problem occurs( among lots of other annoying problems which are not solved yet). Using PPRO 5.5 in two projects now and I am very dissapointed in the quality of this software comparing to PPRO 2.0. To many problems to mention here. It works and thats all.
This is the new problem. When I play the project, the video frames "are heard" ( sounds like the old film projector transport) at low level in the audio signal together with the audio signal itself (at normal level)
This is annoying during editing, but doesn't affect the results by burning on DVD. Is that an normal situation? In my old PPRO 2.0 not such a problem was there. Or is there something wrong.
Thanks for replying
Chris

Chris,
I'm sorry I could not find a solution. In fact I'm stumped and request the help of Todd or Wil or some other Adobe employee to help you out.
Why? The reason for requesting Adobe's help in this way is:
a. Chris has a limited knowledge of English and works with a Dutch version of Windows, which makes it difficult to communicate on the phone.
b. I have checked his system with Teamviewer and the system is more than adequate and is properly tuned/optimized for the task he wants to perform.
c. I can't find a solution to help him.
What is the problem?
System is an i7-2600K with 16 GB memory, P67 mobo, nVidia GTX 570 and 520 cards, 5 x 1 TB disks, 3 monitors, on-board audio.
Source material is simple DV PAL widescreen from a JVC camera. Sequence settings match, no problems here.
Playing a clip with WMP shows no problem, playing from the camera to a TV shows no problem, but playing from the timeline in a CS5.5.1 project results in a clearly audible rattling that is comparable to the rattling one has when projecting old 8 mm film, only louder. This was clearly audible for me over the phone.
I have no idea where to start looking for a solution, because his system looks good from all sides, is properly tuned, has more than enough horsepower to edit simple DV material.
So please Todd, Wil or anybody else from Adobe, can you help Chris?

I want to see lead sheets/lyrics during play back.

I want to be able to set the visualizer to display full screen text/ or pdf images I've added. There is all this wasted real estate during playback. It would be best if there were options to: 1. auto close the added text and return to the library @ the end of the song 2. Establish a hard stop to playback @ the end of a song 3. Format fonts and columns 4. Add content from iWorks files, ie. copy/paste, drag in.

Is this the request line?
I want a Blu-ray player/burner built in on my Macs.
I would like an iPad with a 16:9 display.

How to get windows to update/scroll during play-back?

There's a figure which looks like a little man which you click to get a window to update/scroll as playback proceeds, but this function often seems to turn itself off when you move around the various windows of the current project. How can I get it to stay ON permanently?

It turns off if you manually move or position things in many circumstances (eg moving the playhead), so you don't lose what you were looking at.
If you want it on during playback, there is a preference option to always enable catch mode when you start playback...

Poor play back quality

Anybody have trouble with a classic 120 gb having a skipping static sound randomly during play back? A HD going bad?

Here are some things to try and a few questions...
1) Does the iPod do this with another set of headphones?
a) If yes then try playing music through a docking station. If it still does it, then your iPod is probably heading south.
b) If no then your headphones are shot.
If you don't get static through the docking station, then you 3.5 mm connector is either dirty or failing. To clean it use a damp q-tip. I don't know if alcohol or the like would be a good idea.
Hope your Classic keeps rockin'
Dr. Dodd

Hopping-skipping during play-back

Similar Messages

Maybe you are looking for