Horfrible GREEN STRIP down display. Help!!!

I turned on my I book g4 (owned for sixteen months) and found a bright green strip about one-eigth inch from top to bottom of the display. what gives? do I need a new screen now? No longer under warranty
shows up the worst against any colored or dark graphics background. it is a straight, glowing green line
anyone have any advice
many thanks

Sounds like you have a column of dead pixels.
You can test your LCD using Pixel Check: http://www.versiontracker.com/dyn/moreinfo/macosx/11661.
If the line remains stuck on green then chances are the pixels are dead.
Some users report that gently massaging dead pixels can sometimes bring them back to life. I'd proceed very carefully, however, considering there's a whole line affected. You don't want to risk further damage.

Similar Messages

My nano has a green line down the screen

My ipod nano is not even a year old and suddenly has a green line down the middle of the display.
I plugged it in to my Mac desktop and restored it using iTunes but that didn't help.

Could be the graphics card.
Run the Apple Hardware Test

Stripes down the center of pictures when I print them

When I print 4 pictures on a page, I get a stripe down the center of the bottom two pictures the material printed on the stripe is from the right hand side of the picture. One stripe (lower left picture) is 3/8" wide; the stripe on lower right is only 1/8" wide. This effectively ruins the print. It started about 3 weeks ago. Today I printed pictures again and it's still there. I just installed both black and colored ink.

Hi @teleklier , and welcome to the HP Forums!
I see you are having issues printing pictures. I'd like to help!
Does this issue occur when making a copy?
I'd recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Quality Issues and Green Strip at Right of Frame in Comp. 3.5

I just upgraded to Compressor 3.5 with my upgrade of FCS which includes FCP 7 (I guess this is FCS 3 even though the upgrade box doesn't say so). The quality of Compressor's outputs using the same settings is noticeably inferior to the previous versions of Compressor in the FCS releases that included FCP 5 and FCP 6. I also have this green stripe that appears at the extreme right edge of the frame.
I mostly do h.264 compressions for streaming. In previous versions of Compressor included with FCS 5 and FCS 6, Compressor made incredibly good quality compressions when set to a restriction of 300 kbps for a 500 x 282, 16.9 screen size using the 'best quality' multi-pass encoding setting. In version 3.5 of Compressor, the quality, using the same settings, is absolute crud and I have this green stripe appearing on the extreme right edge of the frame.
My original source content is usually HDV 1080i60. The problem with my Compressor outputs w/ the green stripe is consistent, however, with footage I've been working with in Apple ProRes 422 (HQ)24p from a Red camera.
Has anyone else experienced this green stripe issue and know a solution? I'd also appreciate any suggestions on how to improve the output quality when compressing in h.264.
Also, has anyone gone back to the previous version of Compressor included with FCP 6 (sorry, I don't know what version of Compressor was included w/ FCP 6)? If so, does it play nicely with FCP 7?

I may have just answered my own question with the green stripe artifact issue in Compressor 3.50. Thought I'd share it to see if it helps anyone else.
A true 16:9 frame means the height of the frame is 0.5625% of the length (9 / 16 = .5625). I used to compress material with a frame size of 500 X 282. Although this wasn't a true 16:9 frame, the difference didn't create noticeable distortion and previous versions of Compressor handled it ok. In 3.5 this deviation appears to create strange artifacts, in my experience, on the right edge of the screen in the form of a solid green stripe. When I moved my frame size to 512 x 288, the green stripe artifact went away. 288 / 512 = .5625, which is a true 16:9 frame.
I have no idea if this is just a coincidence or a solution. These are the results of what 30 min. of testing yielded. Perhaps it will be helpful to others in dealing w/ the strange line artifacts on the edges of frames.

The green drop down bar for tracker blocking disappeared when Firefox updated today, how do I get it back?

This feature that helps to block ad and social network tracking appeared on the last update, it had a green drop down where I could then get a screen showing the number of tracking that are blocked, not blocked and could block the ones that weren't. Today when Firefox updated it disappeared. I do have the TrackerBlock addon installed, but I found the drop down helpful and would like to get it back.

Sometimes an icon will get removed from the toolbar by another extension. Could you check the Customize dialog to see whether the missing icon is in there? This article has the steps: [[Customize Firefox controls, buttons and toolbars]].

I am receiving an error message "Error: 150:30" after having my computer serviced. Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1. tried to download a Licensing update, but can't get that to open.????

Adobe Photoshop CS4
I am receiving an error message "Error: 150:30" after having my computer serviced.
Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1.
I tried to download a Licensing update, but can't get that to open.????
My machine had originally been a clone of another Mac. Not it looks like a brand new computer.
Possibly there is something in system preferences to change? I turned off Firewall and allow downloads from all parties.
Thank You for you help!
joe

150:30 means the licensing failed. Photoshop can't be moved like other programs from another drive or from backup.
I would suggest a reinstall to fix it. Anytime you move Photoshop from from drive to another, it breaks licensing. A install is the quickest way. to fix it.
When you are done with the install, apply all CS4 updates. Product updates
Gene
(Remember to mark the answer that solved your issue by clicking on “correct”. This indicates the question is answered and credits those who took time to help you or followup if there are further questions)

Where should the Green Tick get displayed in digitally signed pdf files in whom the Signature has been validated ?

I have Windows 7 & Adobe 11 installed on my P.C (Apart from other Software) . Recently I downloaded Digitally Signed .pdf files & validated the Signature with Trust Certificates . However , the Green Tick Mark is coming on the left-hand side of a blue panel situated in-between the menu bar & the document . Shouldn't it be coming at the bottom right side of the document (Just above the name of the signatory) ? Is there anyway I can get the green tick to display at the bottom right side of the document or is this just the way the green tick gets displayed in current versions of adobe reader ?
This is the way it gets displayed on the top - left portion of the screen :
However , it does not get displayed in the below manner :

First of all, you need an app on the iPad that can read those files that you want to transfer. Adobe Reader and iBooks are two free apps that will read PDF files. Adobe Reader is much more robust than iBooks as it offers so many more features like renaming files, creating folders, annotating, highlights, etc.
Download Adobe Reader in the App Store. Then read this about file sharing with iTunes.
iOS: About File Sharing - Support - Apple
There are other ways to get files to the iPad, like email, DropBox and some other apps that let you mount your iPad like a flash drive.
This should be helpful as well.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad

My iPad suddenly started to show crazy colors. I turned it off and had to use the two button trick to turn it back on. Now it shows only green stripes for a few seconds and goes back to sleep.

My iPad suddenly started to show crazy colors. I turned it off. It would not reboot until I used the two-button reboot. Now it shows only green stripes. only for a few seconds and goes back to sleep. HELP!

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete all apps from this list.
- Press the home button twice when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

While using 6.0 this afternoon it suddenly dissappeared and was replaced by a stripped down version of 5.0 with no addons or bookmarks !!!

While using 6.0 this afternoon it suddenly dissppeared and was replaced by a stripped down version of 5.0 with no addons or bookmarks !!! That's it ... just gone and replaced ... nothing in c:\program files except 5.0 ...

@[https://support.mozilla.org/en-US/user/160087 verdi]: thanks for your helpful suggestions. The "fix" (actually a kludge, but I gotta work with what F5 and my employer give me) was:
# Install/run latest Firefox 3 (despite there being [https://support.mozilla.org/en-US/questions/932269 no 64-bit version for linux]) using [https://docs.google.com/open?id=0BzDAFHgIxRzKbmJDUGZqTzhfbDg this bash scriptlet].
# Create a [https://docs.google.com/open?id=0BzDAFHgIxRzKQjRyQndqUTJpRXM run script] to start firefox so that one can
#* choose the appropriate profile (I was unable to set it from the script without startup error)
#* run multiple instances (I don't want 3.x firefox touching my uplevel profile)
# Run Firefox 3.x with the runner, then point it to my employer's site to install the [http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_compatibility_matrix_10_2_1.html F5 Network Access Plugin] (restarting firefox as required).
The gnome-terminal tab from which I invoke the runner spews a bazillion "wrong ELF class: ELFCLASS64" errors, but the plugin runs, and I can SSH normally (though more slowly) to servers on the VLAN from another terminal tab.

White stripe down MBA screen?

I sat down to update the MBA to 10.5.6 yesterday and rebooted before I started (never hurts) - while on some of the splash screens (before login) there appeared a flickering white stripe down the display about an inch wide, just to the left of center. Looked to me like a set of vertical pixel drivers stuck in the ON state. Went away before the login, and didn't come back during the update, but happened again in the auto reboot after the update.
I tried searching the forum, but didn't see anything like this, although there were some posts about thin white stripes. Am I having a unique problem, or is this something already known about? I'm sure I would have heard from my wife, the normal user, if that had happened during regular use, so maybe it's a boot up issue?
Thanks!

It show the uniformity of the display best if the display is showing with 50% gray. If you have a faint stripe on the display, it might show up. Just create a jpeg file that only contains 50% gray, and use preview to do a slideshow at full screen. If you can't see anything, your MBA should be fine.

HT201406 Ipod has orange stripes down the screen. SICK OF THE BS.

So I literally feel like I am about to hurl out of frustration. My Ipod 4 maybe 5, or 6 I really dont know, has been fine for about a year. Then one day I turn it on, the screen becomes unresponsive within 5 seconds of use and there are very very faint orange stripes down the background of the screen. I will say that my annoying brothers of mine cracked the screen once about 8 months ago, but it has been working perfectly even since then until about a month ago. I have tried to restore through itunes because it is obviously impossible to do it on the ipod itself, but OF COURSE I cant even find the freaking summary button which apparently leads to restore on 11.3.1. I'm at wits-end with this thing, and am ready for it to be FIXED, NOT REPLACED. PLEASE PLEASE PLEASE someone help me. Its IRRITATING and I am really just done with being frustrated.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also as necessary:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

My iMac computer was recently worked on and in the process it was completely stripped down and new operating system installed.

My iMac computer was recently worked on and in the process it was completely stripped down and new operating system installed.
OS X Yosemite version 10.10.1.
After this trip to be serviced, when I try to open Photoshop, I get a message "Licensing for this product has stopped working".
At the bottom of the error window, Error: 150:30
If you continue to see this message after restarting your computer, please contact Adobe technical support for help.
Any help resolving this issue would be greatly appreciated!
Thank You,
joe

Error "Licensing has stopped working" | Mac OS

Green stripe appears on video after compressing

After running a Quicktime file through Compressor, I get a green stripe running horizontally across the center of the image. The stripe covers roughly a third of the screen vertically.
Some background:
The computer is a new 12 core, Mac Pro running Snow Leopard 10.6.4. After experiencing the problem I did a clean install of the OS, installed Final Cut Pro Studio 2, then installed all the updates and still got the green stripe. I have been using the same version of Final Cut on an iMac for two and a half years without this issue. The iMac is also running Snow Leopard 10.6.4.
The Quicktime file is 1920 x 1080, ProRes 422
The Compressor settings are as follows:
Name: MPEG-2 16:9 23.98 6.4/7.6 Best Resize
Description: 24fps
File Extension: m2v
Estimated file size: 2.55 GB/hour of source
Type: MPEG-2 video elementary stream
Usage:SD DVD
Video Encoder
Format: M2V
Width: 720
Height: 480
Pixel aspect ratio: NTSC CCIR 601/DV (16:9)
Crop: None
Padding: None
Frame rate: 23.976
Frame Controls On:
Retiming: (Fast) Nearest Frame
Resize Filter: Statistical Prediction
Deinterlace Filter: Fast (Line Averaging)
Adaptive Details: On
Antialias: 0
Detail Level: 0
Field Output: Same as Source
Start timecode from source
Aspect ratio: 16:9
Field dominance: Automatic:
Selected Progressive
Average data rate: 5.8 (Mbps)
2 Pass VBR enabled
Maximum data rate: 7.6 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 12, Structure: IBBP
DVD Studio Pro meta-data enabled
The Hardware:
Model Name: Mac Pro
Model Identifier: MacPro5,1
Processor Name: 6-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 12
L2 Cache (per core): 256 KB
L3 Cache (per processor): 12 MB
Memory: 6 GB
Processor Interconnect Speed: 6.4 GT/s
Boot ROM Version: MP51.007F.B01
SMC Version (system): 1.39f11
SMC Version (processor tray): 1.39f11
Serial Number (system): H004108YGWR
Serial Number (processor tray): J503704Z1BH8B
Hardware UUID: E18A8A7A-B795-5DD5-9E24-35AB602D760F
Any thoughts on this are appreciated.
Thanks
Larry

Myself as well. I briefly talked to Apple phone support, but they didn't acknowledge the disrepency and proceeded to have me re-install Compressor (even though I was using a clean install of both the OS and Final Cut Suite). Of course, there was no change. It does bother me in that this may be an issue that affects other functions I haven't yet uncovered. I expect see this problem escalate as time goes on.
One rather humorous anecdote: The support rep wanted to determine if I had the minimum hardware required to run Final Cut Suite. When I told him I had just purchased a 12 core Mac Pro, he still went through the minimum required hardware list. One would think an Apple rep would know this system would more than cover the minimum requirements without going through a component checklist.

Hi All, I just installed PS CC 2014 and Deleted PS CS6. I have a HUGE problem! The Liquify Filter on PS CC 2014 is not working. When the filter comes up, my photo is reduced to two color fields - bright turquoise and lime green! Can anyone help me? I

Hi Everyone,
I just deleted PS CS6 and installed PS CC 2014. I'm trying to use the Liquify Filter and it does not work. When I click on the Liquify Filter, my photo does not appear properly. The photo appears as two flourescent color fields - bright turquoise and lime green! Can anyone help me with this? Also, does anyone know if I can re-install Photoshop CS6?
Thanks!
Laraine

Hi Everyone....I figured it out. Strangely, although I had NEVER used Liquify in PS CC 2014....I just realized that in Liquify Advanced Mode that the "SHOW MASK" option was on by default! I unchecked SHOW MASK. Everything is OK. Whew! Tks!

How to display help text for Region in a page having more than one region

Hi all,
I want to display help text for each region in my page. I have 5 regions in my page.
I have a big help text for each of my region so can any easy way is there to put the help text for each region more than 10 lines .I tried lot by searching forums but not able to implement. any document is there then please let me know.
Thanks in advance,
Amit

i mean either if we click the region title name it should display some help text of near about 10 lines in a popup window.
Or on moseover whenever we will put the cursor into the region title then it should displat the help text message of line 10.
Hope you will get my qustion well.
Thanks,
Amit

Horfrible GREEN STRIP down display. Help!!!

Similar Messages

Maybe you are looking for