"Horizon Files" is not seen in Workspace 2.1

In old version of Workspace, there is a service called "Horizon Files", but it is not seen in the latest Workspace 2.1. idea?

As from version 2.0 the files part is simply removed from Workspace. VMware has decided to discontinue that product which in a way I can understand. With the acquisition of Airwatch, Secure Content Locker will replace Horizon Files and that product is way more mature than Files was. Only thing so far that I came across, it seems not capable of sharing folders with external people. There is a way to workaround this but I have been told by an Airwatch presale that this will be in their next release. To be confirmed.
Now you have 6 days left to benefit from the "no cost" upgrade mentioned in KB2076011 if you are entitled to it. So grab your phone and call everyone you can to have it done Would be a shame to miss this.
When I say "no cost" in fact you get the SCL licenses for free. You have to signup for a maintenance contract which is normal and as it is an on-premise installation you will have to pay also for the implementation. But that s pocket money if you want my opinion for what it brings.
As from Workspace 2.1, SCL is now fully integrated in it.
Hopes this helps
Seb

Similar Messages

TS2512 i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

1) What you downloaded should be a packed file (zip, tar.gz, etc) that needs to be unpacked into the directory of your choice.
2) & 3) are answered by Ant's installation documentation (the page you're quoting from):
http://ant.apache.org/manual/index.html

Text seen in swf file but not seen in flash pro. publish

I am using fmath formula component for flash. when i push ctrl+enter, texts in formula object are not seen, there is only tiny squareroot symbol. however, when i open created swf file, everything seems normal. I use flash player version 11.2. . Also, everything is ok in version 9.
http://www.fmath.info/flash/download.jsp

Are you setting the font that is being used to display the formula yourself? If so is it properly embedded and issued to the component properly? A quick way to check is to use a known system front (Arial, _sans, etc) and see if text shows up. If it does you're just not either embedding properly or aren't pointing to the font correctly in the component.

Photo file names not seen in PSE 12 editor while editing

How can I see the file name of a photo while editing in Photoshop Element 12?

Thanks for the answer. However the name shows only when in the Expert mode not the Quick or Guided modes.
I note that in the Expert mode only the relative size of the image on screen is shown as a percent in the lower right corner. That is where I am used to see that in the PSE 9.

Set Case-Milestone duration in java: update not seen in workspace

Hi
I created the following method to set the duration of a phase's end-milestone based on the start milestone being attained:
    public static void setFaseDeadline(Connector connector, CaseIdentifier caseIdentifier, String phaseStartMilestoneName, String phaseEndMilestoneName) throws CaseServiceException {
        CaseMilestone startMilestone = getCaseMileStone(connector, caseIdentifier, phaseStartMilestoneName);
        if (startMilestone != null) {
            pl("State startMilestone: " + startMilestone.getState());
            CaseMilestone endMilestone = getCaseMileStone(connector, caseIdentifier, phaseEndMilestoneName);
            pl("State endMilestone: " + endMilestone.getState());
            if ("ATTAINED".equals(startMilestone.getState()) &&
                "NOT_ATTAINED".equals(endMilestone.getState())) {
                Calendar deadLine = startMilestone.getUpdatedDate();
                pl("Start Milestone updated: " + formatCalendar(deadLine));
                deadLine.add(Calendar.MINUTE, 5);
                endMilestone.setDeadline(deadLine);
                pl("End Milestone Deadline: " + formatCalendar(endMilestone.getDeadline()));
                pl("End Milestone Deadline Duration: " + endMilestone.getDeadlineDuration());
It seems to work fine, duration gets set, however in the workspace I don't see that the milestone is updated.
The milestones are fetched by
        ICaseService caseService = getCaseService();
        List caseMilestoneList = caseService.getCaseMileStones(context, caseIdentifier);
This is because the getMilestones method from the case does not deliver me any milestone.
It seems that this gets me a copy of the milestones instead of the actual milestones
Anyone an idea how to set the actual duration?
Thanks in advance.

In code above you see that I print the duration after that I set it.
I created an example class that lists all the milestones:
        List caseMilestoneList = connector.getListOfCaseMilestones(caseIdentifier);
        pl("Case Milestone List size = " + caseMilestoneList.size());
        for (CaseMilestone caseMilestone : caseMilestoneList) {
            pl("Case Milestone Name: " + caseMilestone.getObjectName());
            pl("Case Milestone DisplayName: " + caseMilestone.getObjectDisplayName());
            pl("Case Milestone State: " + caseMilestone.getState());
            pl("Case Milestone Deadline: " + caseMilestone.getDeadline());
            pl("Case Milestone Deadline Duration: " + caseMilestone.getDeadlineDuration());
This shows that the changed caseMilestone does not get saved to the case. Does anyone know how to save this change to the actual case?
Oh, by the way, I'm using BPM 12c (12.1.3)

File registry problem: entered file types not seen via RON but in DB

Greetings,
I configured SCM with the new Jdev file extension types to be treated as text for
merge purposes as suggested in the RC2 release notes.
I used RON 4.11 to enter 6 or so new file extensions, then hit the OK.
These extensions are not visable but when attempting to re-enter them, I get
a SQL dup. key constrain exception.
Useing SQLplus I find them in i$sdd_file_registry
The difference between an extention I entered one at a time, vs N at a time is
the sequence (SEQ column) is larger for the N at a time:
4294966997 +/-
vs
326 for one entered
VS
8251 for those setup at SCM installation time
Will SCM still treat these as text even though I can't see them? The RULE was
set correctly to be: TXT_FILE
Thanks for any help here,
curt

It's NOT the case of the file system showing the file correctly… It is saved to the requested location… You are just overwriting it with the standard PDF… The supplied paths you defined are the same… Here I have just made a change to your code…
var myDoc = app.activeDocument; // Just so I can ignore the rest of the code…
var myPermission =confirm ("Are you sure you're ready to save?","","Save Script Execution")
if (myPermission){
var myFileName = prompt ("Enter Filename","");
if (myFileName){
var destFolder = Folder.selectDialog('Select which folder to save to Katie:');
else
alert ("Save cancelled");
if (destFolder) {
/*Save as Illustrator CS4*/
var IFile = new File(destFolder + '/' + myFileName + '.ai' );   // Now unique
var ISave = new IllustratorSaveOptions();
    with (ISave){
        compatibility = Compatibility.ILLUSTRATOR14;
   /*Save as standard PDF*/
    var IPreset = '[Illustrator Default]'
    var pdfSave = new PDFSaveOptions();
    var pdfFile = new File(destFolder + '/' + myFileName + '.pdf' ); // Ditto here
        with (pdfSave){
             pDFPreset = IPreset;
             viewAfterSaving = false;
             compatibility = PDFCompatibility.ACROBAT5;
/*Save as smallest PDF*/
var SmallestPDF = '[Smallest File Size]';
var pdfSaveOpts = new PDFSaveOptions();
var pdfFileCompressed = new File(destFolder + '/' + myFileName +'%2e' + 'now_format' + '.pdf' ); // This was just un-string your variable…
    with (pdfSaveOpts){
        compatibility = PDFCompatibility.ACROBAT5;
        pDFPreset = SmallestPDF;
        viewAfterSaving = false;
destFolder.execute()
myDoc.saveAs (IFile, ISave)
myDoc.saveAs(pdfFile, pdfSave)
myDoc.saveAs(pdfFileCompressed, pdfSaveOpts)
else {
alert("Save cancelled!")

My half downloaded file is not shown in the list of downloads

my half downloaded file is not seen the download box for further downloads but its half part is still in the folder of download.

Is your portlet a mobile portlet ?
if yes you can specify that it is not a "mobile only" portlet.

I am getting this error when I open Firefox after DLing Firefox 5 (never seen this in any other previous version): FATAL ERROR : The dynamic C library contained in the extension file could not be found.

Hi there,
I'm getting this error when opening Firefox 5:
FATAL ERROR : The dynamic C library contained in the extension file could not be found.
I've never seen this error before... First time it happened was immediately after DLing Firefox 5 yesterday. I haven't DLed or installed anything else recently.
I see that you already have my system info. Any help is much appreciated!

Just read in another post that there is a known 49 character limit on the file path for QuickTime movies..

HT6154 how to download the files from mail like gmail or yahoo or hotmail to my iphone 5s.I have not seen the option in my iphone 5s

how to download the files from mail like gmail or yahoo or hotmail to my iphone 5s.I have not seen the option in my iphone 5s

Download what files?
What is the actual problem that is occurring?

Some files not seen by import tool

Some, but not all, of my JPG files created by Photomatix HDR are not being seen by the LR 4.1 import tool eventhough I can see and view them in the Windows 7 file system and viewer.
LR just does not see them but they are there. I tried closing Photomatix, LR and even rebooting figuring it could be Photomatix not releasing a lock on the file but that does not work.
This is not an infrequent problem. It happens to about 20% of the images I create with Photomatix.
I am not using the export LR plugin

Below are screen shots. If you look carefully you will see that the following files are not visible in the LR import tool at all. They are not greyed, checked or unchecked. Just not visible.
blackbird.jpg, F-117 and B-1.jpg, USAF B-17.jpg, USAF F-22a.jpg, USAF F-82g.jpg, USAF FS-454.jpg, USAF Missing Man 3.jpg
I am happy to upload the files if you give me a suggestion for a file sharing service.
Thanks for your help.

EA4500 Windows 7 cannot index files so files not seen by Windows Media Player

I have setup a disk on the USB port of the EA4500 and have 4 folders. One being music. I want to access this folder via my Wireless laptop with Windows Media Player but I only get a handful of the 3000+ songs on the disk. A hard wired PC can access the files but not a wireless laptop. I'm not sure where the issue is. If I use the drive via //host/Music the Star ratings are not available but I get all music, if I map a drive then I get star rating but only a handful of songs. I have tried to change permission but I cannot change the file permissions on the Linksys.
Solved!
Go to Solution.

You should be able to change the permissions in the router page. Are you using the Classic Firmware or the Linksys Smart Wifi? If you are using the Linksys Smart Wifi firmware, it is under USB Storage > Folder Access. If you are using the Classic Firmware, it is under Storage > Administration. The laptop should be able see all files just like the desktop.

Files not seen in Finder but available from application

This is a really bizarre problem that I can't quite make sense. I was using a program called 'Transmit' and noticed that a folder I have on my external hard drive suddenly disappeared. The folder was no longer visible in Finder. However, when I open the application it was created with (Logic Express) and attempt to open files from this 'missing' folder, it opens them without a problem. However, this folder continue to remain hidden from Finder. What is even stranger, is that when I use 'Whatsize' to scan my external drive, I still see the folder!!!
Help!

There are two things that can make files and directories invisible to finder on a HFS volume, and that's the unix way, when a filename starts with a period "." and the mac legacy way with the invisible bit (a bit that can be switched for each entry in HFS).
I would suspect it is the unix way as the files came from a NTFS partition which cannot hold invisible bits. For the unix way you just have to rename the offending files and or directories to remove the dot (from the cli you would use mv) for example:
mv ~/Desktop/.Copied_Directory ~/Desktop/Copied_Directory
For the invisible bit there is no default method built in... Apple have a cli tool called SetFile but you need to install the developer kit to get it. Alternatively there are various 3rd party apps that allow you to change the invisible bit. but i would find it very odd if this was the case... coming from NTFS.
Another easier way that lets to look at all files in the finder regardless of their invisibility is this:
Paste in terminal to show invisibles:
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
Paste in terminal to hide invisibles:
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
If you still cannot see the files in finder... and you cannot copy the files via the terminal then i suspect the NTFS volume is corrupt... however that might just be the file-system not the files. Next stage would be to use recovery software to see if you can recover the data.

There are about 8 songs in a playlist on itunes that are listed in the playlist but cannot be transferred to my ipod because it states: "..the original file could not be found." When I try to locate the song I get a list of the different music librar

There are about 8 songs on a playlist that are listed in the playlist library but when I try to transfer them to the playlist, it states that they can't be transferred because the original file could not be found. Then it asks, do you want to locate the file but when I try that I get a few libraries but am not sure how to locate the particular songs. Some of the songs were purchased and some were transferred from a CD. I have seen the same question asked on the help page but haven't found an answer.
Thanks.

Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly, neither in preview nor in Camera Raw dialog.

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
I tried to clear the cache in both programs but it didn't help.
Has anyone an idea????

First see if a reboot of your PC helps. If not,
Resets may be in order:
Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
Bridge: Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model.

Few 5DmkII RAW files do not open with Aperture, but OK with other software

Hi, I have two RAW files which I cannot import with Apple Aperture. The files open fine with Canon Digital Photo Professional, Raw Photo Processor and dcraw (and with various programs on my Windows 7 laptop) and I'm able to create TIFF files from the RAW files with every other software.
Detail about the files:
A. they are two first frames of burst (used auto bracketing, which takes 3 images in burst mode, to create HDR image)
B. there is nothing strange in the files, they are normal RAW files and file size is normal as well (other 28.4MB and 32.7MB)
C. both files process OK in above mentioned softwares and there are no blocks missing from created TIFF images, also preview JPG in the RAW file is OK
D. Mac OS X Quick view (press spacebar in Finder) and Preview do show these two RAW images well (I assume they use the embedded JPG image)
I have installed all the updates available in "Apple icon" -> "Software update..." function. Therefore I have Apple Aperture version 3.0.2. Computer is MacPro:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 12 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
How I can submit the files for Apple to create fix? I searched for Apple Aperture support but there is only this forum, no email address or anything. Do they read this forum?

Some clarifications and answers to your questions:
First to Tony Gay:
I try the feedback later today even they claim "Please know that while we do read these submissions, we cannot guarantee a personalized response.", which is original reason why I'm why I wrote this question here. The url you provided did not work but this should:
http://www.apple.com/support/feedback
This is not relevant to sRAW files, I did not change the between camera taking automated bracketed shots the image format for 2 shots to sRAW and took 3rd with RAW, that is not even possible.
I have copied the images from card to hard drive, not trying to read from the card itself. However now you mention tried also from card = exactly same result. Tried desktop (different HD) and external USB and external eSata, all same result.
Get info doesn't show anything wierd for the images. All other 192 RAWs from same shoot were imported with exact same methodology (as well as 60000 images before that).
Then to gosuk2:
There is no HDR setting in camera, I took the images FOR HDR, but did not use any specific setting, just used 1 1/3 stop bracketing and 2 second times when camera automatically takes 1 1/3 underexposed, correct exposure and 1 1/3 overexposed image (the order of images can naturally be changed via custom function in camera). All this is unrelevant since I shoot quite often HDR with this method (=more than 500 images each month) this way and they have always been fine before these two images.
I see the files in import panel and I the don't use import dublicates setting so that doesn't affect the situation (why it would, Aperture things files are broken).
Again HDR cannot be combined in 5DmkII, it's just automatically shoot 3 bracketed shots.
No I don't get same result no matter what I do, it's just these two files. My other ~5000 HDR bracketed RAWs are importing fine as well as all burst/shots taken in continous shooting mode.
I'm very aware how stacking of images works, but I do not understand relevance to this issue. I can not import the images at all to Apple Aperture, after importing all images Aperture displays dialog saying that following files could not be imported to Aperture, then displays list with both of these files in the list and gives possibility to locate the files in Finder.
I have used Aperture since version 1 and I have 70000 images imported successfully to Aperture. Earlier I have seen this dialog "Aperture could not import image" only after hard drive/card failure. However then images cannot be used in Canon's DPP (Digital Photo Professional) or any other RAW software - now the problem ONLY EXISTS in Aperture all other RAW converters are able to open and process SUCCESSFULLY these images.
So I'm not whining that Aperture is not good, but if it starts to work only part of the images in future and I have to process rest of the images with Canon DPP (that program is really lousy on usability standpoint) then I'm not so happy with Aperture anymore.
Will report here if I get any comments back from Apple through the Feebback tool.
Message was edited by: vahonen (due to forum software replacing words like s u c k s etc. with ***)
Message was edited by: vahonen

"Horizon Files" is not seen in Workspace 2.1

Similar Messages

Maybe you are looking for