Horizonal lines while watching footage from capture viewer

Hello
I see small horizonal lines while I watch videofootage from viewer of Final cut express 4. This happens before I start capturing. Is this normal? After capturing lines have disappeared.
- Footage seem to be okay when I watch it from camera's window
- I tried capturing with different firewire cable
- I tried to do this with different camera

Is your footage interlaced?
If you load the ingested clip to the viewer or canvas and set the display size to 100%, do you see the lines return?
This is normal if you are dealing with interlaced footage. FC suppresses one field in displaying media within FC - unless you are set to display 100%. Computer monitors (as you have discovered) do not display interlaced material correctly.
MtD

Similar Messages

Problem while retrving data from a view

Hi Friends
i have a problem while retriving data from a view v_t685a.
the error message is :""" "V_T685A" is not defined in the ABAP Dictionary as a table, projection view or database view."""
i wrote : select single VTEXT1 from V_T685A into w_cst_jin1 where
 KSCHL = 'JIN1' and
 KAPPL = 'V'.
how to retrive the data.
waiting for quick response
Regards
Mukesh

Hi
This is a Maintenance View, not a Database View
SO can't fetch data using select statement.
You can use the Table T685 directly to fetch the condition Types data straight away instead of the view. write the same select for this table and use.
Regards
Anji
Message was edited by:
 Anji Reddy Vangala

HT1657 I have no sound while watching movie from I Tunes?

I have no sound while watching movie from I Tunes?

See also:
* https://support.mozilla.com/kb/No+sound+in+Firefox
* https://support.mozilla.com/kb/Video+or+audio+does+not+play
You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer. 
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level. 
Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process. 
You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.

Error while deleting UIElements from existing view of webdynpro project

hiiii everybody,
I have an existing project which i need to modify.so when i am trying to delete some UIElements from existing view and saving the metadata, itz showing error as for example:
1)Group Group2 header is missing
2)wdThis cannot be resolved.
please do help out.
Thanks and regards,
Parama.

Hi,
First error comes when you deleted Group header but Group UI is there.
For Second one, check the names of UI elements different or not.
Regards
LakshmiNarayana

Vertical green lines while watching DVD on M40-148

When I try to watch video or DVD on my new laptop there is several vertical green dotted lines across the screen.
Why is that? And how do I get rid of them?

Hello guys
It is very strange issue. A friend of mine has also M40 and I have tested playing DVD films and everything works fine. It is very strange that you see those lines just while DVD player runs. Something like that should not happen.
In my opinion you should reinstall the unit with recovery DVD and dont make any installation. Immediately after operating system installation try to watch DVD using preinstalled DVD player. If the problem persist contact service partner and let them check the unit. The unit is pretty new and warranty is still valid.
As far as I know the recovery image is tested and something like that should not happen.
Good luck!

Authorization Issue while Data Preview from HANA View

Hi Experts,
We are using BW on HANA. We have created DSOs (info provider) in BW and generated HANA views from there. We have also created analysis authorizations in BW for authorization relevant characteristics. In HANA, we are able to go to the generated analytic view and preview the data from it successfully.
Now I have created a test user and assigned a custom role with below authorizations to this user in HANA:
- bw2hana/../REPORTING role (this role is automatically created by activation of DSO in BW).
- Roles MODELING, MONITORING, CONTENT_ADMIN, USER.
- Multiple system privileges although not needed, like REPO.EXPORT, REPO.IMPORT, etc.
- Analytic Privilege _SYS_BI_CP_ALL
- Package Privilege: REPO.READ for all required packages (tried with ROOT package also).
In BW system also, the test user has analysis authorizations providing access to the relevant info objects.
But when I am trying to preview data for HANA view, I am getting attached error (also listed below):
"Cannot get the data provider outline
SAP DBTech JDBC: [2048]: Column store error: Search table error: [2950] user is not authorized"
I tried to trace the situation is HANA and got below details in 2 trace files:
indexserver_alert_saphana.trc:
[6433]{416977}[66/-1] 2014-10-14 00:59:27.541187 e CalcEngine ceAuthorizationCheck.cpp(02365) : AuthorizationCheckHandler::addAPsToSearchObject: Error during converting SqlAPs to Query entries
indexserver_saphana.31003.075.trc
[6433]{416977}[66/-1] 2014-10-14 00:59:27.541197 i TraceContext TraceContext.cpp(00702) : UserName=TEST_SSO, ApplicationUserName=<<computer name >>, ApplicationName=HDBStudio, ApplicationSource=csns.modeler.datapreview.providers.ResultSetDelegationDataProvider.<init>(ResultSetDelegationDataProvider.java:118);csns.modeler.actions.DataPreviewDelegationAction.getDataProvider(DataPreviewDelegationAction.java:278);csns.modeler.actions.DataPreviewDelegationAction.run(DataPreviewDelegationAction.java:242);csns.modeler.actions.DataPreviewDelegationAction.run(DataPreviewDelegationAction.java:127);csns.modeler.command.handlers.DataPreviewHandler.execute(DataPreviewHandler.java:53);org.eclipse.core.commands
[6433]{416977}[66/-1] 2014-10-14 00:59:27.541187 e CalcEngine ceAuthorizationCheck.cpp(02365) : AuthorizationCheckHandler::addAPsToSearchObject: Error during converting SqlAPs to Query entries
Do you know what this "Error during converting SqlAPs to Query entries" actually means"? How can we resolve this issue? The authorization is working properly for our user ids. But we need to provide restricted access for business users so trying to create test user and custom role.
Thanks
Nitesh Gupta

Hi Pinaki and Prabhith,
Yes, my issue was resolved. Sorry, missed to updated here.
I was just a beginer for BW on HANA Security at that time and didn't know many small things. The solution was pretty simple.
Whenever you assign analysis authorizations to a user in BW, you also need to generate corresponding HANA authorization. This is done through tcode RS2HANA_CHECK tcode. This tcode converts BW analysis authorizations into HANA analysis authorizations and assign to the HANA user. You can see generated HANA authorization table RS2HANA_AUTH_STR in both BW and HANA.
Once the HANA authorizations are successfully generated for a user, he should be able to see data from Views.
Let me know if this solves issues. Then I will close this thread.
Thanks

Rolling Horizonal Line on External Monitor

I'm attempting to use my Mac Book Pro to feed my home theater projector (720p) from a project on the Final Cut timeline. I'm getting a strange horizonal line that intermittently rolls from the top to the bottom of my 106" screen, almost like the old videotape days. It seems to happen on the faster zooms and pans. Any idea what's causing this? I tested this on my 26" LCD TV and it wasn't there. I'm using a Belkin HDMI DVI cord.

What is the frame rate of your video?
http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?i=57865582&id=3065 19484
24p Monitoring Myth
Check that out -- will open iTunes.
CaptM

If I want to keep the quality of the original captured footage(from the tapes),what format should I?

I captured canon hv20 by firewire to my computer with adobe premiere elements 11. After capture, I have cutted clip three times. Then I want to export my computer because of I watch on my 46 inches full hd lcd television. If I want to keep the quality of the original captured footage (from the tapes), what format should I? I choosen mpeg 1440x1080i 24, it alerts error. Or i chosee avchd 1920x1080p, then it is too larger than captured scenes. I think it is 20000MB but captured scened (without cut) only 11.2 gb. Please help me. Thanks very much.

YCLCS
File size and Bitrate and Quality are interrelated. From what I have read, the bitrate for your HDV footage from the PAL Canon HV20 camcorder should be about 25 Mbps (megabits per second). If you did a HDV data capture firewire into Premiere Elements, you should MPEG2.mpg file on the Timeline.
When you did your export
Publish+Share
Computer
MPEG
using Presets = MPEG2 1440 x 1080i25, did you make any changes in the settings under the Advanced Button/Video Tab of the preset?
When you look at the settings in the Export Settings dialog for the MPEG 1440 x 1080i25 preset, you will see the default bitrate settings
Minimum = 18 Mbps
Target = 25 Mbps
Maximum = 30 Mbps
The program's export bitrate may be higher than that of your source media, resulting in the increased file size. You can check out the bitrate, using the properties readout from a free program such a MediaInfo
http://mediainfo.sourceforge.net/en
You could experiment with different bitrate, trying to maintain the quality as you decrease the maximum bitrate from 30 Mbps downward to reduce the file size.
The file extension of your export should be .m2t, .mpg. So, your export is MPEG2.m2t. I find that that type of file will playback in Windows Media Player, but not QuickTime (latest version). This particular export would be the closest to the source media properties.
But, right now I would try to perfect the MPEG2 1440 x 1080i25, experimenting with the bitrate to bring the file size into line with the source file and still maintain video quality. The AVCHD.mp4 suggested by Ann Bens is a prime candidate quality wise. If size becomes a factor, you might want to explore a 1920 x 1080i25 or 1440 x 1080i25 Windows Media Video 9.wmv file which we can discuss in more detail depending on how things are going.
Please review the above and then let us know how we can help.
Thanks.
ATR

Capturing footage from a camcorder memory card into FCP 7

I teach high school video technology. We are using FCP 7 and are awaiting the upgrade to 10.
In the past, we connected canon camcorders to the macs using a firewire and utilized the log and capture option under the file menu to put footage from miniDV tapes onto the computer to edit.
We just purchased canon FS400 cameras that use a memory card to store video instead. We have 18 computers and only ONE allows us to use the log and transfer option under the FCP 7 file menu to import footage from the memory card to the computer so the kids can edit what they shot. We have connected the camera to the computer using the USB cord that came with the cameras. However, there's only a message that comes on the camera LCD that says not to disconnect the USB cable or the power source until you safely end the connection from the computer.
When we launch FCP and select the log and transfer option from the file menu, nothing happens. on the one computer that DOES work, log and transfer allows the footage on the memory card to pop up after a little while and we drag it where we need it to go and it uploads to the computer.
I'm thinking it has to do with the computer settings. I tried the software updates on one computer and nothing changed. Still unable to import/capture. Please help as the district tech support can't get to us anytime soon and my students have planned and shot 2 different productions they can't even edit yet. I don't want to keep planning and shooting if they can never edit. Thanks so much for ANY reply.

h s video tech teacher wrote:
i'm not sure what you mean when you say "make sure you see the cards mounted on your computer."
You know when you insert a CD or external firewire drive, it appears on the desktop and in the browser windows? That's what should happen with your camera media. You may have to set the camera differently, try a different cable, etc., until you can see the media.
Wait until the computer recognizes the media, then launch Final Cut.

FCE: Capturing footage from my Canon XL1

Got FCE and when capturing footage from my Canon XL1 I get the video however there is no audio!
Tried capturing footage via iMovies and works no problem!
Not sure if this has anything to do with it but I'm using a external mic. on my XL1 into one ch. on the audio inputs. Also scratch disks is on a external 1TB WD drive. Finally tried virtually all the set-ups on the 'easy set-up' but still no joy.
Can anyone throw me a life line on this one?!

sorry I should have made myself abit clearer.....when the tape is played back in my XL1 I can hear audio when my headphones are pluged into the camera also the camera has audio monitors which I can see movement verifying there is audio. However in FCE I don't see any audio level movement.
In terms of equip. I just have a external WD 1TB drive (USB), firewire cable for video camera and the USB cable for the keyboard & mouse.
Additional application: Flip video s/w (however had fce issue prior to installing this).

Can not get Final Cut pro to capture HD footage from Canon HV10

Ive had soo much trouble with no success, in trying to get footage from my HD camera into Fina cut Pro HD 4.5. I can get normal dv footage when i cahnge the setting s on the camera, and Final cut pro, but HD is not been possible so far.If any one can inform me of anything, is it possible at all to capture from my camera in HD, do i need Final Cut Pro 5? Do i need pluggins? Anything!! I want to capture HD quality!
Powerbook G4 Mac OS X (10.4.9) 1.5GB MEMORY

You need to list the camera you are using, the settings you shot on and the settings on your sequence (easy set up etc)

I recently purchased a macbook pro and i am trying to put some camcorder footage from my sony vx 2000 onto iMovies. for some reason i cannot import or capture any footage from my camera and tapes onto the imovies. i have the 9 to 4 inch pin firewall cable

i have a sony vx2000 and a macbook pro and i obtained the 9 to 4 inch firewall cable. my issue is that cant get any footage from my vx2000 to my imovies. i have looked up how to do it online and they make seem like you just plug it in and go its all golden. but not for me what am i doing wrong it does seem to be recoginize that my camera is even plugged in and no way letting import of capture any of my footage to my imovies. please help

The camera must be plugged in to AC power (not batteries only). And generally, the camera should be set to Play mode, not recording mode.

Capturing Footage From Composite / S-Video into FCE

I want to capture some footage from analogue sources into my Mac. It can either be via composite or S-Video but my question is : Which gizmo should I use to convert the analogue signal into DV?
The Canopus range seems like it would do the trick (ADVC55, 110 or 300, with the 55 closest to my price-point.) But the specs say it's compatible with FCP, and don't mention FCE explicitly. If I buy it, will it work, or is there some particular difference between FCP and FCE, that means it won't?
Mac Mini 1.42 Mac OS X (10.4.5)

Canopus works just fine with FCE. I've been using my ADVC 110 with two versions of FCE for two years and it works fine ... the 300 should be even better cuz of the built in TBC. I know from others that you will have no compatibility probs.

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

Error while creating datasource from view ZBSIS_VIEW

Hi all,
I could not create the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
"Invalid extract structure template ZBSIS_VIEW of DataSource"
Can anyone help on this regard.
thanks.

Hi,
Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource.

Horizonal lines while watching footage from capture viewer

Similar Messages

Maybe you are looking for