Horizontal Line After One Section Complete

Hi,
can we pass an Horizontal Line After TEXT ITEM In New Line.
I want to display line after one part .i have three part like General Information Section ,Personal Information Section Contact Information section and Experience Section .
i want to Devided these Region using Horizontal Line.
How can i do this.
Thanks

Hi,
Thanks to reply me.
It's Good But Not sufficient for me.
i am using only one region and i want to devided item using Horizontal Line in Three Section .How can i do this with one region.
How to divide One region in Multiple Section and how to put item in that section.
How can i do this.
Thanks

Similar Messages

  • Add horizontal line after each record

    I have 10 records seperated by ID. I m using List in SSRS to show data on report. I need to add horizontal line after first record, then after second record till 10 th record. How do we add this line?
    Any help much appreciated.

    Hi SQL Insane,
    Per my understanding that you have add the tablix into the list and group on the "ID", now you want to add an horizontal line between each record which grouped by the ID like below, right?
    If so, please reference to the details information below:
    Select the entire rows and Right click to select the Insert row-Inside Group below to add an inside row group
    Select the new added inside row group and set properties as below to make sure there is only display the black solid line on the bottom just like to add an horizontal line:
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • Horizontal lines after turning my Satellite on

    Sometimes when I turn the laptop ON, it comes up with many horizontal lines and gets worse. If I hold down specific keys on the left hand side of the keyboard, the lines disappear and can disappear completely and not return but most of the time they return when I remove my finger from the key.
    I did system restore a day ago and the lines temporarily disappeared but today they came back and would not go. Now they have randomly disappeared. Is this a hardware defect?
    If so, can somebody help me get in touch with Toshiba in Spain as I have tried to contact them and I??ve had no reply. I??ve only had my laptop a month and I feel jinxed as every computer I??ve had, goes wrong. But this time we have got 3 years warranty incase.
    Thanks,
    Sam.

    Hello Sam
    Try please to connect external display to your notebook. Use FN+F5 key combination to switch to external display only. Please watch carefully if the problem persist and let us know. We will continue our discussion after your next posting.

  • CC 3D text + postcard problem! horizontal line after render!

    Hi.
    I tried to make a 3D text, using a 3D text with a background postcard layer. I merge the two layers and then render it. But during the rendering process i get a horizontal line of light and shadow in the center of the finished layer.
    like this http://oi61.tinypic.com/5wl35x.jpg
    A friend has send me a PS file and told me to check it out. I played around with it and I've found out that when i use his postcard layer (so the one in the file he send me) and merged it with a 3D object, it turns out fine. Without the line. But as soon as i make my own postcard layer and use that one, i get the bug again.
    The line is always in the center and horizontal, no matter where my 3D object is placed.
    I checked on the basic 3D settings of the postcard layer, compared his to mine and couldn't find any differences. My PC is new and very powerful, it also can't be my GPU, since it turns out fine when i use his postcard layer.
    I also tried resetting the presets by removing that file from the folder in appdata, but it didn't fix my problem.
    Please someone help me! I bought a PC just to learn 3D work and it's very frustrating and discouraging  to be stuck at the beginning like that.

    Hi SG,
    I dont know how to move the mesh and camera, but i did change the Ground Plane Shadow opacity to 0% and it did get rid of the line, even tho the final product looked different. The background got a lot brighter, which is probably easy fixable/adjustable.
    Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 3990 MHz
    Built-in memory: 16327 MB
    Free memory: 13103 MB
    Memory available to Photoshop: 14634 MB
    Memory used by Photoshop: 68 %
    Image tile size: 1024K
    Image cache levels: 4
    From the preferences window:
    Detected Graphics Processor:
    GeForce GTX970/PCIe/SSE2
    The tutorial you linked is really nice and I will definitely try it out, but it's not the same. The shadows are on the "ground" below the 3D Text. In my linked tutorial the shadows are on the "wall" behind the 3D Text. Sorry to be so picky right now, I really want this bug to be gone and it's such a strange bug, when other peoples postcardlayers work on my rig, but my own won't. I'm a beginner and I don't even know what else you can do with a postcard layer, but I know I will need it at some point.
    I also appreciate your guys help so far. You are investing your time and thoughts and all that for free. Thank you.
    edit: here is the difference between using my friends postcardlayer vs using my own, but turning the Ground Plane Shadow opacity to 0%.
    http://oi59.tinypic.com/2ic5d08.jpg
    http://oi62.tinypic.com/2aipjl0.jpg
    the shadow position is slightly different and the proper version has some lighting(?) on top. The proper versions shadows and lighting look more dynamic/alive(?). I don't know the right terms. To be honest, I would properly be just as picky if it was the other way around :/
    edit: I just tried out turning up the Ground Plane Reflections (while shadows on 0%) just to see what it does and it brought the line back.

  • Ibook G4. LCD - Horizontal Lines After Boot

    I am working on an iBook G4. It boots up to the Apple logo. Once the OS starts to load I get a blue screen sometimes and other times a mass of multi-colored horizontal lines. The display works fine when booted to the OSX DVD.
    I ran Disk Utility to repair the disk and it's permissions. I backed up the data on the drive and performed an "Erase and Install". I have reset the PRAM. Still getting the same issue.

    Hmm. What's the processor speed for this iBook? Is it a 12" or 14"?
    There's the possibility that you've got an issue similar to what's known as the "corey arnold" issue:
    http://www.coreyarnold.org/ibook/
    If you have an external hard drive with a Firewire connection, you could install OS X on there, then boot the machine from this external hard drive to see how it behaves.
    Any change with Safe Mode?
    ~Lyssa

  • Grey horizontal lines after dropping phone?

    I dropped my phone and when I picked it up there were and still are grey horizontal lines across the screen. I don't know how to fix it. Help? I looked it up online and somewhere it said that something could be wrong with the LCD? I have also tried resetting it and turning it off. Anything that could help would be great. Thanks!

    Your iPhone has a hardware issue from the drop.  The screen will need to be replaced.  Go to https://locate.apple.com/country to find service locations.

  • Horizontal lines after rendering?

    I have a video that is very 'fast' or theres a lot of movement in it.
    After I render it, it becomes very 'line-y' when ever there's quick movement. Basically I can see horizontal tearing lines.
    The source footage is not like this.
    Is there any special method or codec I can use to avoid this?

    Sounds like the video is interlaced. You computer is progressive scan and some cameras shoot interlaced. Older TV's are interlaced and some of the newer one's are both. If the end result is for computer only you'll want to de-interlace the video. If it's for TV only you can probably leave it alone and it should playback fine when you play it on a TV.
    I believe to de-interlace you only need to change it when you export to "Progressive Scan". However, you can also de-interlace the clips in your project before you export. I called Adobe tech support about this same thing several years ago and they suggested I do both, de-interlace the clips in the project and when you export it.
    You may have seen 1080i and 720p, etc... the P is for progressive scan and the I is for interlaced. I believe the reason for interlaced was because it's less bandwith to send half the image at a time (every other line) than the whole image. So, a broadcast need to use interlaced. But, everything I assume is moving to progressive scan. However, I imagine interlace will always be supported since so many things are interlaced.
    Simply play with a small clip by exporting it simply as it is and make a DVD of it, play it and see how it looks on your DVD player. My DVD player actually has a button on it for progressive scan. You may need to change a setting on it or your TV, or it may just play it as is. Then, if you're not happy with the results, try simply setting the export option to progressive scan.
    I don't have Premiere installed on this computer otherwise I'd look to see how to de-interlace the clips for you, but it's something easy like right clicking the clips on the timeline or something. I may look later and get back to you on that.
    Hope that helps!

  • How to draw horizontal line in smartform after end of the all line items

    Hi Friends,
    I am working on the smartform. I have created TABLE node in Main window.
    i want to draw a horizontal line after end of the main window table node. i mean after printing all the line items of the table, I need to print one horizontal line.
    Could you please help me how to resolve this issue.
    FYI: I tried with the below two options. But no use.
    1. desinged footer area in the table node of the main window.
    2. tried with uline and system symbols.
    please correct me if i am wrong. please explain in detail how to draw horizontal line after end of the main window table.
    this is very urgent.
    Thanks in advance
    Regards
    Raghu

    Hello Valter Oliveira,
    Thanks for your answer. But I need some more detail about blank line text. i.e thrid point.
    Could you please tell me how to insert blank line text.
    1 - in your table, create a line type with only one column, with the same width of the table
    2 - in table painter, create a line under the line type
    3 - insert a blank line text in the footer section with the line type you have created.

  • Display the horizontal lines whether or not a section is empty.

    I am using CR with vb.net 2010 and latest version of CR for net 2010.  I want to print a report like a grid which means horizontal and vertical lines appearing whether or not there is text in a section.
    I have a box surrounding the report and vertical lines extending down the report.  There are two group headers and a details section.    The horizontal lines only appear when there are values in the group or details sections.  Thus, once the detail lines end (and therefore there are no more groups either) on a page, the horizontal lines stop though the vertical ones continue.  I want the horizontal  lines in the sections to continue as well  -- just like in Excel.
    There is a page break for the top group so there are lots of pages that have detail lines empty.  How do I print horizontal lines in those sections as well when there are no values.

    hi Suzanne,
    there are several different ways of doing this.
    1) the easiest way of doing this is to create a new Page Header that contains all of the lines. this works if you've got a report that is static in way that each page is laid out. make the new page header the size of a page in length, move it up so that it is Page Header A, and go to the section expert and set it to Underlay Following Sections. now add the grid lines to this new page header A.
    2) another way of doing this is to create a whole bunch of Details sections....e.g B to Z. put lines in these sections. write a conditional suppression formula for each one based on how many records there are in a group. this is way more work.
    3) another fairly easy way is to create a formula that outputs the horizontal lines...i.e.
         numbervar N:= 10;
         // you'd need to figure out what N is based on the number of existing records and the number of lines you want
         replicatestring(replicatestring("_",300) + chr(10), N)
    make sure that you right click on the formula and go to Format Field > Common tab, and set it to Can Grow.
    -jamie

  • How to insert horizontal line dynamically after every line item in sapscrip

    Hi All,
    I have to insert a horizontal line  after every new item in sap script.
    How to do this .
    In some material there is2 line item or in other line item it ay be more .
    How to insert horizontal line dynamically after every line item
    Point will be rewarded
    Regards
    Niraj

    Hi Niraj,
    You can get your work done by keeping the horizontal line (&ULINE&) after all the item level fields, in this case once each item line is written you will get a horizontal line.
    In case you have different fields for the item lines which are optional (not printed every time) then you can have them in an IF....ENDIF condition and below the endif use a horizontal line.
    Some thing like this:
    /E ITEM_HEADER
    IL <TI>Item,,Material,,Description</>
    IP <TI>,,,,Quantity,,,,Price,,Price unit,,,,,,Value</>
    / &ULINE(71)&
    Let me know if this helps, else please describe your problem with an example.
    Luck.

  • Changes in Vertical Lines Across Hidden Sections

    I have quite a few reports designed in CR 8.5 primarily by someone else but modified by me over the years.  The original programmer created two page footers.  PFa is to print when there are multiple pages except on the last page (set to underlay sections), and PFb to print only on the last page or first page if there is only one page.  The report in this example is an invoice that could be multiple pages or one page.  PFa will show Continued.... as part of the footer on all but the last page.  The last page will show the total.
    The original design has vertical lines extending from the page header to a horizontal line in PFb.  For a one-page report, this works just fine.
    When printing multiple page reports, there is a little section that does not have a line in PFa.  So it has been filled in with a second line over the previous line and it extends from the top of PFa to the horizontal line in that section.  This also works fine in CR8.5.  This worked fine in CR XIR2 as well.
    I am creating a new viewer that I would like to support current versions of Crystal.  So recently I installed the CR for VS ver 9.  Now my CRXIR2 and CR2011 standalone programs show lines extending to the bottom of the page over PFa on a multipage invoice.  PFb shows properly on the last page.
    I am pretty sure when I was using CR for VS version 4 it did not do this (last week), but I cannot remember if I had tested a multipage invoice at that time.  Now that I have upgraded it appears the handling of the lines is different.  I am testing the reports and they are all showing up differently now.  The image attached shows the idea.  The vertical lines should stop at the top horizontal line except for the one on the right which should stop at the bottom horizontal line.
    I know there are other and probably better ways to program this but I inherited this stuff and am trying to find a way to not edit all the possible reports that have this problem (could be hundreds).  Does anyone know if this is an intended design change or if there is a workaround I can use?  My viewer is being programming in VB 2010 but the image attached is just from CR 2011 (CRXIR2 does the same thing now).  The second image attached is the original from CR8.5 which still works because I assume, it is using a different print engine before the change in CR version 9.
    Any help is appreciated.  TIA, rasinc

    Hi Jamie,
    Sorry for the delayed response but I have been out of the office since Wed.
    Are you saying that I just need to change the programming of the lines in the CR designer?  If so, I had already done that in the same manner as you had suggested before.  eg. don't let the lines cross a section.  Terminate the line at the first section (pfa), then fill it in after, in the lower section (pfb).
    If that is what you meant, I have done that with one to prove it is a solution.  This will work for me directly, however, the viewer will be distributed to people who may or may not be buying the CR program.  For those who buy it, they can modify their forms as they please if it is a problem for them.
    However, there will be many people continuing to use the CR 8.5 forms in this newer viewer.  These people may have to have this problem fixed and may not know it can be redesigned.  So I am trying to be proactive to figure out if I can solve it with my programming but it looks like it is a difference as part of the CR viewer dlls between CR8.5 and CR2011.
    If you think it is still something that can be adjusted in my programming somehow, I can give you a screenshot but I am thinking your thought was to change the line programming with the designer.  If so, I know how to do this, but I have never seen and do not have access to many rpts that will be affected.
    Thanks again for the help, I appreciate it. rasinc

  • PRODUCTION ORDER--Qty changed after one operation----URGENT

    Dear Experts
            Hope u all R doing well
    In the production order,after one operation completed(whether it is first ,second  or last ) the system is allowing to change the qty.
    but we want the system to disallow  the qty change.
    could anybody can help, is there any configuration settings inside?
    waiting for your valuable response
    Thanks in advance

    Hi,
    Sorry for the delay.
    Pl. follow the steps below.
    1. Create a status profile Eg: s1 usng t.code bs02.
    2. Enter status no. as 1, status as CRTD, a description, tick Initial status & lower status no. as 1 & higher status no. as 2.
    3.In the second line enter status no. as 2, status as REL, a description,  & lower status no. as 1 & higher status no. as 3.
    4.Choose Object type tab.
    5. Choose PP/PM: Order header.(tick)
    6.Then come back to main screen & double click REL.
    7.Click the create icon in the top.
    8.Choose Release & then choose radio button under <b>SET.</b>
    9.Then come back to main screen & again double click REL & then choose create & select change & check the radio button under <b>FORBID</b> & then save.
    10. In t.code OPJH(order type), choose your order type & then assign the status profile( Eg:S1)
    11.Now convert the planned order into production order.Release the order & save.
    Further changes cannot be made in the production order.
    Pl. give feedback after testing.
    Regards,
    S.D.Senthilkumar

  • Need to draw line after the 2nd line item(Smart Forms)

    Dear Friends,
    I need to draw horizontal line after the 2nd line item  and 3rd line item in smart forms.How can i achive this.
    Plz help.
    Edited by: farook shaik on May 19, 2009 8:19 AM

    This is what you need to do:
    1> In the tables->details section define two line types LT1 and LT2.
    2> Come back to tables section pressing the table painter button.
    3> Select a line type for which you want to have an underline(say LT2).
         a] If the anchor cursor does not come click the draw lines and columns button( the pencil icon nutton)
         b] select the line type ( it will become black after selection. Press and hold down ctrl to select
             multiple cells.
         c] after selection click the lower 'frame button' ( which is right at the top of box and shading).
    4> Now goto data section where you have given your internal table name and work area.
         a] in the sort criteria put your field POSNR and check the Event on Sort end chk box.
         b] you will see an extra node under the main area of the table.
         c] Create a table line with the line type LT2 in the node.
         d]Also in the Main area add another table line with LT1 as the line type.
    5> If POSNR remains unchnged LT1 will be triggered.
    6> if Posnr changes then LT2 will be triggered with the underline.
    This will suffice your requirement.

  • Can't fix jagged images and horizontal lines when scanning

    Hello, I just bought the HP Envy 5660 and it prints fine but scanning is horrible. I keep getting jagged and horizontal lines after scanning. They came out fine a few times but even on 300 ppi it looks bad. Please give me some advice. Thank you.

    Hello Hulkamania,
    Welcome to the HP Forums.
    I see that you are having some issues with the scan quality with lines and jagged images.
    I have seen this issue before and I was able to resolve it quit easily by doing one simple step.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Use the ON/OFF button to do a proper power cycle on the printer once it has been connected to a wall outlet.  This will do a Semi Power reset on the printer.
    Try another scan and let me know how it turns out.  Try multiple scans if you like.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Can i disappear the line at report section.

    hi.
    i have one small Requirement.
    ie.
    under detail section in put one report section
    in report section i draw  two vertical lines left and right
    and also immediate report i draw one horizontal line.
    my requirement is ..
    Based upon the Detail section date the report section some times goes to the  second page some times it is at first page.
    when ever it is  goes to the second page the horizontal line should be Disappear...
    only left and right should be appear..
    is there any magic
    is it possible
    it yes
    plz suggest me some ideas.

    Hi Srini,
    You cannot conditionally suppress lines/boxes.
    Only workaround is to place that horizontal line in another section and suppress that section itself.
    -Abhilash

Maybe you are looking for