Horizontal line using strobe effect

Is there a way to stop the slow horizontal line movement using strobe effect. There is a slow horizontal line movement upward as the effect is blinking. Similar to how computer screens look when there in a video shot.
Thanks,
Mark

Sorry about the confusion. I was not sure what to call the "rolling sync bar", but that is what is showing up when I add the strobe EFX. And no...I do not want it to appear. I have set the strobe efx to show the under lying layer and I have also taken the Strobe efx off and set keyframes on the above layer to cut the opacity from 0 to 100 every 4 frames as to produce the same strobe efx. Both ways produce the unwanted rolling sync bar. I tried some bezier curve options on the keyframes, but no help...or at least I have not yet hit the correct combination.
Thanks,
Mark

Similar Messages

How to display horizontal line in top-of-page by using object oriented ALV?

How to display horizontal line in top-of-page by using object oriented ALV.
I am created top-of-page in object oriented alv.
But not be successes in showing horizontal line in it.
Can any one pls give solution for this..
Thanks and regards..

Hi
Try like this
data: gt_list_top_of_page type slis_t_listheader. " Top of page text.
Initialization.
perform comment_build using gt_list_top_of_page[].
form top_of_page.
* Note to self: the gif must be loaded into transaction OAOR with
* classname 'PICTURES' AND TYPE 'OT' to work with ALV GRID Functions.
* I Loaded NOVALOGO2 into system.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
* I_LOGO = 'NOVALOGO2'
* i_logo = 'ENJOYSAP_LOGO'
         it_list_commentary = gt_list_top_of_page.
endform. " TOP_OF_PAGE
form comment_build using e04_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
      clear ls_line.
      ls_line-typ = 'A'.
      ls_line-info = 'Special'(001).
      fgrant = xgrant.
      concatenate ls_line-info fgrant
      'Stock Option Report to the board'(002)
             into ls_line-info separated by space.
                    condense ls_line-info.
      append ls_line to e04_lt_top_of_page.
endform. " COMMENT_BUILD
Use following syntex for footer print in alv:
* For End of Page
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
* For End of Report
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
Reward all helpfull answers
Regards
Pavan

My problem using iPhoto Having the horizontal lines going through the photo when printing of a website

My problem is using the I Photo and printing a picture with horizontal lines going through it

Your topic title and topic content are a bit confusing? Are you printing a website page? That would be thru Safari or other browser.
Or is a photo from a website? If so how was it imported into iPhoto?
Also what system and iPhoto version are your running?
Does the photo print correctly from Preview or other application?
What's the pixel dimensions of the image?
How much free space do you have on your boot drive?

The horizontal line has been appiered at the bottom of the touch screen. In addition to that problem the screen starts blinking after 3-5 minutes of use. I bought it 4 months ago.

Please help me to resolve a problem with my iPod touch. It has horizontal line at the bottom of the screen and screen starts blinking after 3 minutes of use. It's so frustrating as I bought just 4 months ago and didn't even think tha apple products have such defects.

All electical producs have defects. Apple products are not immune.
To rule out a software problem try:
- A reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
- If still problem make an appointment at the Genius Bar of an Apple store. If the iPod is defective you will walk out with a replacment.

Photoshop lighting effects puts horizontal line through image

Apply filter > Lighting effects to an image (300 ppi RGB) and when photoshop renders the lighting, there is a horizontal line through the image. It is not a screen or video issue, it is in the image and has to be retouched out like corrupt image.
not a transparency issue, tried different file formats, flattened image first, etc.
WHY?
Had this happen before, but now in Cloud V6 is really aggrevating. People have been posting about this for at least 3 versions with no answers.

Moved from the Creative Cloud to the Photoshop forum. They will be able to help you here.

I'm using Win 7 and Firefox Screen fills with horizontal lines,

Had no problems with previous versions of FF. I updated with FFv4 several weeks ago and have my browser screen continually being filled with horizontal lines. I can remove some of them by using the vertical scroll bar but they return when the display contains a lot of text. Sometimes when display is pictures or videos I am spared. This never occurred before FFv4. If a screen contains a few pictures and is engulfed in lines I can scroll it with my mouse and some pictures reappear but there are still lines over the rest of the display. I use an antivirus (BitDefender) and scan regularly. I also use Windows Defender for protection which was recommended by my AV manufacturer.
Sometimes of late I have noticed that when the display is no maximized the problem doesn't happen as often. I use a 19" monitor.
So far tonight while writing this note I haven't experienced a problem but the window is not set to max.

I had this problem as well. For me, the solution was to disable the two latest add-ons I had installed: Cooliris and HP Detect (I have a Pavilion dm1z). The issue with horizontal lines went away after restarting the browser.

My iPhone 5s has horizontal lines and it won't let me use the touch

my iPhone 5s screen has developed horizontal lines and keeps freezing what is it? the only way to unfreeze it is to hit the button on top and then it freezes again

The screen keeps freezing & the horizontal lines are getting worse - can this be fixed?

Subtle horizontal lines in HDV footage exported from iMovie 06

Hello!
I just bought a Cannon HV-30, which I'll be using to film an instructional DVD. I'm hoping to use iMovie 06 to edit, and was planning on using iDVD until I realized how tricky DVD authoring is, if you want to sell thousands of copies of your DVD and have any hope of them playing on people's DVD players.
At any rate, I still want to be able to burn drafts of my film using iDVD. I tried doing this yesterday, but my footage was distorted both in the iDVD preview, and in the DVD I burned. The distortion looked different depending on how big the preview window was. When it was fairly small, I'd get this wavy, ripply effect whenever the camera panned. When I maximized the window, and also in the DVD (which was full-screen), I'd get a more subtle jagged edge to vertical lines--every-other-line on the monitor would stick out, like a fine-toothed comb. When there wasn't movement in the film, things looked pretty good, except for a bit of horizontal-lines visible.
I made my first DVD by using the Export... iDVD function. After I read on this forum that this doesn't produce the best quality, I tried importing the iMovie project into iDVD, but I got similar results.
Any ideas?
Thanks a ton,
Rob

DVDs look best on the system they were designed for: CRT TV sets with 640x480 square pixels NTSC (768x576 square pixels PAL)
When 'blownup' in size on large computer monitors or large HD TV sets the image quality will be less than optimum - that's why the new Blu-ray were created.
There are steps you can take when shooting your video that will help. Remember that mpg compression works on the differences between frames and anything that creates unnecessary difference between frames will cause reduced mpg compressed quality. So: use a tripod to avoid camera shake; make all your pans slow and smooth; and shoot with plenty of light to avoid the 'grain' caused by electronic noise in low light situations.

How to insert horizontal lines in alv report?

hi,
    i have to insert horizontal lines in alv report.( RM07MLBB )
        actually my requirement is:
                           basis list = RM07MLBB.
first secondary list = another report is called here ( RM07DOCS )
                  i want to insert horizontal lines in the first secondary list, when i execute individually RM07DOCS , i can get horizontal lines, but when i dounle click in the basic list --> in the first secondary list , i am not getting the horizontal lnes.
functional modules used are REUSE_ALV_HIERSEQ_LIST_DISPLAY & REUSE_ALV_GRID_DISPLAY.
    here in this program,
                    is_layout = alv_layout.
hence i tried to give
              alv_layout-no_hline = ' '.
but not effecting.
          can some one please tell me , how to insert lines in the alv report.
thanks in advance,
Dastagir.

hello,
     so i cannot insert horizontal lines in the first secondary list according to my sorting condition, i.e., in a single block there should be :
       if same delivery challan number is repeating they should come in the same block,
for the corresponding delivery challen number, if have po number, is repeating , they also should come in the same block.
                   in this way i have to seperate the blocks containing EXNUM , EBELN CONDITIONED.

Creating and Selecting a line in After Effects CC?

OK, So I suppose this is a two part question...
But there is a little thing in After Effects CC that is annopying me alot, and it could just be me, and the way I've been doing things...
1) The way I have creating a simple Line in After effects, is by using the pen tool, placing two points, and then just using a stroke on the Shape Layer, and no fill. Is this the most efficient way to creating a line in After Effects? It's what i have always done, and it's not until CC that it has been a pain.
2) The reason why it's inconveniencing me is when i try to select that Shape Layer in the Comp Viewer! For some reason, in CS6, when i wanted to select that line, i could just click on it, and it selects the layer, Now, when i click on the line i just made, nothing happens, no where in the line that i can click or highlight will it select the layer of that line, Instead, I have to click the very center of the composition for some reason. there is small unseen point there that i either have to click exactly, or click and drag in that area, in order to select the layer, which gets annoying if there are many line at any given moment. This point is also where the anchor point for the layer is placed.... Is there any way to change this? To be able to change some setting so that when i click on the line itself, it selects it, and to have the Anchor point be placed in the center of the two point i make?

But I do this kind of thing all the time. The last 5 projects involved 8 stroked horizontal and vertical shape layers drawn with the path tool that I had to move around the screen. I also had a bunch of little shapes that were only 5 X 5 pixels. These layers are nearly impossible to grab in the comp window at even 200% zoom factor without inadvertently grabbing the wrong layer or scaling the layer when you try to move it in the comp window.
It is like trying to drive a screw with a hammer. It will kind of work but you will do a much better job if you use a screwdriver and the screw will remain undamaged. Hence, selecting small assets in the timeline and moving them around with the transform properties from the timeline is using a screwdriver. Using the direct selection tool is just the wrong tool for this and it always has been. You have to have some real estate to grab on to if you expect to move a layer without scaling it.
You can mitigate the scaling problem for small layers by adding a simple expression to scale so the layer always stays at 100% but this will just automatically fix the scale problem and won't help moving the layer around in the comp window very much.

Horizontal lines in any exported video file type in Elements 9

I have switched from Elements 4 to Elements 9 for my video production, and I have not been able to get rid of the horizontal lines in ANY file type or with any setting. I have tried everything I've read so far on these forums.
A lot of comments say that exporting to WMV is the problem, but I export hundreds of videos to WMV with Elements 4 on my 32-bit XP computer.
Whether in 32-bit XP or on my new super powerful 64-bit Windows 7 computer, Elements 9 renders lines with motion. The screen shot shows a typical example. Butterflies as flying lines, and the edge of a tree, as I panned, has a shadow along it made of many lines.

I said in the last sentence of the last post that I only get the red line if I add an effect or transition, just as you predicted.
I brought up the older camera because Elements 4.0 and my XP computer handled every bit of DV or HDV footage from that older camera, while Elements 9 on the XP computer and my new super computer won't handle ANY footage properly if it contains rapid movement.
I make videos to use on local computers and to be viewed over the internet. I use the WMV Lan setting when I export. It worked perfectly with 4.0.
Now, this is exactly where I see all attempts in other forums going astray--the assumption that WMVs may be the problem inherently. I have processed hundreds of WMVs with 4.0 and they look great at any viewing size on the screen and on a local computer or viewed over the internet. 4.0 has worked perfectly for this. I'm stumped!
This combing appeared in a Flash video I made yesterday. I sure appreciate the time you put into helping us deperate people.

Horizontal Lines in saved AVI preview file

Hi all,
On another thread I was asking why I was getting an error message when trying to export and save a movie, but now I was able to get a temp AVI file after hitting enter and saving a preview file, but this AVI preview file, which is normally of the same quality of the full saved file I think, has horizontal lines in it that are very obvious compared to the original file... below are the sample still screenshots to compare...
Clean original 720x480 30 fps AVI file
Horizontal lines showing in this Premiere 720x480 30 fps AVI preview file
I have a file imported in to the timeline and it is set to play in reverse via the speed setting being set to -100 and it plays back in the preview window correctly, in reverse, when I click the play button.
But when I do a "File>Export Timeline>Movie" command I get an error message saying "An error occurred while making the movie. Error writing file (disk full?)"... but my hard drive is not nearly full, with over 30 gigs left open on it... and my RAM usage gadget shows over half of my RAM capacity is unused.
But I got a temp preview file that was generated after hitting enter to play the preview after I wasn't able to save, and that's how I got this file... and I think the temp files are normally just as sharp as the final saved files because they take just as long to generate when previewing by hitting enter as they do when doing and export and save.
Also, this process saved an 8.5 gigabyte AVI file from a 1.5 megabyte AVI file using the CamStudio codec.
Another try using the MSU lossless codec produced a 3.5 gigabyte AVI file that looked better, but wouldn't play any faster than about one frame per second after an hour and a half of saving time.
Does anyone have any solutions?... also I see that the new file from Premiere shows a larger screen size, though it was saved at the same 720x480 size as the original was.
Thanks,
numetro

Yes, that's what I started with, but it wouldn't render a working file of reversed video for anything over 2 minutes or so... so that's when I started trying everything else in the world... including these ridiculous attempts and resulting problems with Premiere trying to handle the complex task of saving a video file correctly.
If Apple can make a simple "REVERSE" button in its user friendly iMovie app, why can't anyone else?
Originally there was Xander's Video Time Reversal, that worked for me before and still works for some files, but just won't work on other slightly longer files and produces blank or unusable files 75 percent of the time, and Xander's French forum admin committee was asleep at the wheel while I waited for approval to ask a question.
Then there was "Rehan's" method of using two different apps (VirtualDub and Avisynth) and writing AVS script files in notepad... compared to this, it may be easier to have the desired video clip re-enacted in reverse with professional actors and a special effects team than it would be to use Rehan's method.
Then there is Stupeflix.com, which seems to be all the name implies since they were bragging about a webpage with an upload button to upload a clip to, and then a download button to get the reversed clip from... but the link for this magic page is nowhere to be found in the conversation on the blog site that was talking about it, and Stupeflix.com itself currently shows no feature of the kind.
Then finally at the long awaited end of this of my odyssey, after Premiere and before going back to XVTR, there was "K-5 Video Reversal Tool" and after reading the description about the needed codec pack and deciphering which download button is actually for the Video Reversal Tool and not one of those trick "Download Here" buttons that takes me to a virus laden site in Siberia, I did find a download link for it that is from Cnet.com... but then that app didn't work at all, even for very short, uncompressed AVI files, which it was supposed to handle with no problem... but it would flash a command prompt screen for a quarter second, then give a message stating that it produced the reversed file... which of course, it did not. And the guy that coded this gem has a chat thing on his K-5 website that he keeps responding to my original question about and he just can't admit that the app doesn't work.
I feel like... I've wasted a day and a half... now two days after writing so much.
Thanks,
digi

Horizontal lines in 3d simulation

I've got multiple shots back to back using the Cube spin in 3d simulation as a simple effect. i'm getting these horizontal lines on the outside edges during the transition. anyone know why? anyway to fix this? i'm not viewing on an ntsc monitor, could that be the problem?

i seemed to have solved it. my canvas needed to be set to fit to window and not at 100%.

Horizontal Lines in Footage

Hi there,
I am having severe problems with a day's worth of footage shot on a client's camera (which I had very little time to prepare with).
As you can see in the video at the bottom of the post, there are dark horizontal lines that move from the bottom of the screen to the top. From researching this seems to have been caused by the frame rate/shutter speed combination in relation to the frequency of the lights. FYI It was shot at 24 frames a second with a 60s shutter (unfortunately there was no 48s shutter on this camera).
Please can anyone tell me if there is any way to rectify this footage seamlessly in AE or any other software? Re-shooting is not something I want to consider, so I would entertain using any software or plug-ins to rectify this.
Many thanks!
L1004554 MOV 2 - YouTube

In many cases the digital anarchy plug in Flickr Free will do an amazing job on this problem. The cost of the plug-in is usually less than the cost of a reshoot.
Flicker Free: Deflicker Time Lapse, LED flicker, and Slow motion / High Frame Rate in HD and 4K for After Effects, Final…
as a sidenote, this should have been clearly visible in the viewfinder or LCD screen of the camera. It's something very experienced cinematographer would look for.

Horizontal Lines in DV Stock Video

I've worked in FCP in the past but it has been at least a year or so. I'm way rusty. We just bought some stock video we want to edit together for internet use. The video has horizontal lines through it. I did some searching and found some stuff on de-interlacing. Since a picture would help, I did a screen grab for you:
http://www.redheadcompanies.com/fcp.html
I know there is a simple fix for this. Is it Square Pixels? Doing that distorts my video.
-Kirk

I figured it out. It was a simple Video Filter application. I opened the video clip wen to Effects > Video Filter > Video > De-interlace

Horizontal line using strobe effect

Similar Messages

Maybe you are looking for