Horizontal Mouse-Sensitive Scroll

Hi,
I am trying to make a vertical mouse-sensitive scroll that I
created a while back work going horizontally.
You can see the one I created at
http://www.elizabethandhomer.com
and click on the "CUSTOM" link.
I have been fiddling with the x and y coordinates but can
seem to make it work. If I sent someone the FLA file, could you
possibly help me make it work scrolling HORIZONTALLY?
Thanks in advance.
Kit

palyons, you have no idea how long i've been searching for an answer to this problem. your tip works like a charm. Thank you!

Similar Messages

How can I prevent Magic Mouse from scrolling horizontally when I don't want it to?

I recently purchased a Magic Mouse to go with OS 10.6 Snow Leopard. It's a great mouse but it causes 2 problems:
If I leave it on "Scroll with interia" in System Preferences/Mouse, it scrolls horizontally when I don't want it to. Since I mostly work in Word documents, I often lose my place in the document this way. On the other hand, checking "Scroll without inertia" makes vertical scrolling, which I do all the time, a lot harder.
The mouse seems to cause what I think of as "fractures" in Word documents--words and parts of sentences will disappear or get crunched together , then reappear when I select the place where they vanished. They also reappear if I scroll vertically to get the problem area off the screen and then return to it. This wastes a lot of time at best; at worst, I'm afraid I'll lose work. The problem occurred once in a while with a Logitech bluetooth mouse I was using, but not as bad and not all the time.
I love the mouse's ergonomics and would like to keep it, but if I can't solve this problem, I'll have to return it. Would be very, very grateful for any tips! Thanks.

Always nervous about recommending sites I have no personal experience of. On the plus side it doesn't relate to any of the bad sites I am familiar with and it appears to be the developer's site ... but there is no contact point for you to ask questions. You said in your initial post it was to go with Snow Leopard but this version says it is meant for 10.7 and above. Did you notice that? I also notice several other references to Word and mouse and one person found the solution lay in the updating of word 2011 to its highest level. I can offer no more.

I am unable to get my Logitech T620 touch mouse to scroll horizontally in Photoshop CS6

I am unable to get my T620 touch mouse to scroll horizontally in Photoshop CS6. Any suggestions on how to enable this? The bar at the bottom of the document moves left/right as I scroll, but the screen doesn't.
I am using a T620 touch mouse on Windows 7 64 bit with the latest version of setpoint. I have checked the box in the mouses settings to allow sidescrolling with a swipe of 1 finger. I am aware you can hold control and swipe up/down to get a left right scroll.
Thanks in advance

This site may help.
How can I establish horizontal scroll with T620 To... - Logitech Forums
If this does not solve the problem, you may want to address your inquiry to the techs at that site.

How to reduce magic mouse sensitivity..?

I've found that my scroll on my magic mouse are way too sensitive.., anyway.., I've tried to looked after sensitivity mouse controlers at preference but I just couldn't find one.. Does anyone knows how to reduce the mouse sensitivity..??

I too have the same problem... especially when using Adobe InDesign CS5. it seems like when I only hold my hand barely above the Magic Mouse, the pages move around on the screen, or fly off the screen.
I went back to using the previous USB opitcal mouse. I like the concept of the Magic Mouse, but for design work, it just doesn't work well with InDesign or Illustrator or Photoshop.!!
I've tried adjusting the mouse preferences, but it did not make any difference.
It might be good for folks who just use Safari and email, but for designers, it seems to be a very bad idea!!

TableView horizontal and vertical scrolling is horribly slow

How can I adjust the horizontal and vertical scrolling amount?
I used the Ensemble example prorgam and streched the column so that the horizontal scroll bar is displayed. I then used the right scroll button which then scrolls extremly slow. I've looked at the javadoc on the tableview and I cannot determine how to set the scrolling amount. I can check if the table is scrolling but I would like to set the amount to be a column width at a time when using the left or right arrow.

It probably needs to be actually rendered to the Scene graph before the lookups can be made, so the lookups won't work in the initialize method.
There are a number of reasons I don't like this solution
- I don't like the string binding
- the fact that there are scrollbars that are descendant nodes of the table view is not documented, so (at least in theory) a future release of JavaFX could choose not to use the ScrollBar class (for example by creating its own scrolling implementation). This would break the code you have.
- if you decided to create (or use) an alternative skin for the table view which had other scrollbars in place (again, unlikely but theoretically possible), you'd end up setting the unit and block increments of those scrollbars too. In other words, there's no guarantee these are the actual scrollbars you want.
So, not ideal but at least if it works you have something...

[X300] Mouse Wheel Scroll Lines Setting does not stick

I often use an external mouse (no additional driver needed). After every reboot, the setting "Mouse Wheel Scroll Lines" in Control-Panel -> Mouse -> Wheel is reset to 1 (I am using Vista). This is really annoying because it slows down scrolling extremely.
Does anyone have the same problem?
I think its caused somehow by the ALPS touchpad driver (The X300 has a really bad one, the Synaptics pads built in previous Thinkpads were WAY BETTER).

wfaz wrote:
VPN User ...
Have you made any progress? I am having no luck getting the X300 touchpad to scroll with MANY applications: Photoshop, Illustrator, Access to mention some. I use Windows XP - another user has complained that with Vista he does not getting scrolling to work with iTunes, Live Search. Plus, wheel events are not handled by the Remote Desktop, so anytime you are tunneling, you don't get touchpad scrolling. I have been expecting a new UltraNav driver for months - but nothing yet. I think I have tried every combination of touchpad and trackpoint settings possible, but maybe you know something I don't.
WFaz
I am sorry but the problem you describe is a completely different one. Personally, I don' t care for these few applications, especially iTunes and further rubbish. Fact is, the quality Ultranav2 Driver is much much worse compared to the Ultranav1 which uses a Synaptic touchpad. Responsiveness, accuracy, supported applications, bugs are much worse with the Ultranav2 used in X300.
AFAIK adding applications to support the touchpad needs just adding them to some list in registry or what. But as I said, I never cared for that. The problem that the driver resets mouse settings when using it, I find much more disturbing.

Mouse wheel scroll event ON CHANGE?

Colleagues,
Very simple question:
How to get mouse wheel scrolling event on change? Without polling?
Is Acquire Input Data.vi the only way to get it?
Thank you in advance,
Andrey.

Hi Andrey,
i think it's not build in. I wrote some years ago the attched vi's, because i also miss this feature. These vi's use the "acquire input data.vi", but it only polls if a control has registered for it.
Hope it helps.
Mike
Attachments:
ScrollEvent_LV71.zip ‏461 KB

Why am I recently unable to use my mouse to scroll email topics or content? I can only use the up and down arrows keys to scroll.

Why am I recently unable to use my mouse to scroll email topics or content? I can only use the up and down arrows keys to scroll. I am able to use my mouse to scroll through internet searches. It only seems to have affected my email messages.

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - Mavericks
Safe Mode - About

[Solved] Mouse Sensitivity options missing in GNOME 3.8

I have a fresh install with GNOME 3.8 and the mouse sensitivity options are missing, although according to the documentation they should exist. There are no optional packages for gnome-control-center that would enable such a thing, and I have xinput installed.
Am I missing a package or configuration option of some kind, or is this a recently removed feature?
Last edited by kourosh (2013-06-26 15:41:14)

Logitech EX110 wireless, I can't remember really, I never felt like I'd needed to increase the senstivity until recently. Tried a new user, made no difference, tried a new mouse however, and the Mouse Sensitivity option appears. Apparently it depends on what mouse you are using, I thought those kinds of settings were applicable to any mouse but apparently not. Solved I suppose, I'll probably buy a new keyboard and mouse soon anyway.

Firefox and Thunderbird creates CGLog files in /tmp on my Mac. It contains a lot of info related to keyboard and mouse (keys, scrolls, clicks!) I am concerned!

These files mostly contains following lines:
Firefox and Thunderbird creates CGLog files in /tmp on my Mac. It contains a lot of info related to keyboard and mouse (keys, scrolls, clicks!) I am concerned!
--- flushing event log at XXXX.XXXXXXXX ---
432138.5090574 (Firefox): CGSGetNextEventRecordInternal: XXXX.XXXXXX loc (-XXXX, XXXX) conn 0xXXXXX MouseMoved win 0xXXXX (click 1)
and the most scaring:
XXXX.XXXXX (Firefox): CGSGetNextEventRecordInternal: XXXX.XXXXX loc (xxx.xx, xxx.xx) conn 0xXXX KeyDown win 0x0 flags 0xa00100 set 252 char 63233; key 125 data -2303 special 0 repeat 0 keybd 44
Why it happens? Is it dangerous? How can I turn it off?
I saw that on the latest Firefox release for Mac and on Firefox ESR 31.2.0 for Mac
I saw that on Thunderbird release for Mac 31.2.0

You can start with this;
'''[https://support.mozilla.org/en-US/forums/support-forum-contributors/710576 Possible Mal-Ware Scan For Macs]''' {web link}

Is there a way to hide the horizontal and vertical scroll bar?

Hi,
I have report with customized page height and width and I am displaying it in the windows forms.
When I am resizing the form wherein the crviewer is dock in, the horizontal and vertical scroll bars appears.
Is there a way for me to suppress the those scrollbars?
Thanks in advance.

Couple of ways I've been able to find info about. E.g.; there is not straight API off os the viewer (CRviewer.ScrollBar = False ).
1) Add Panel control onto the page and add report viewer control into a Panel. Set Scrollbar, width, height property of Panel control.
2) See http://www.dotnetspider.com/forum/266932-Remove-Scrollbar-from-Crystal-report-Viewer.aspx for another idea.
If either of the above works for you, please let us know as I have not tested this yet.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Mouse will scroll right, left, and down not up. happens every once and a while.

mighty mouse will scroll right, left, and down, but not up. happens every once and a while. have wiped with alcohol, but no help this time.

As Barry says, wiping with liquids is not advisable.   However, with a similar problem this is how I approached it.
1.   Disconnect the mouse.
2.   Dampen (not soak) a cotton bud in alcohol. (I prefer whisky).   Then squeeze between fingers to ensure it is not wet.
3.   Rub the bud against the ball for a minute or so to ensure all parts of the ball have contact with the cotton bud.
4.   Then rub vigorously on clean white paper for a couple of minutes in a figure of eight fashion and tap it every now and then. I have seen quite large peices of fluff removed this way
5    Allow twenty minutes or so for the alcohol to finally evapourate to ensure there is no moisture.
6    Reconnect the mouse.
Having said all this, after three years or so your mouse will probably need to be replaced anyway.   Apple appear to be moving away from corded mice and therein lies another problem.   My experience with the Apple charger, Apple batteries and other premium batteries has not been good.   Batteries seem to run down at a rate of 10% per day even though its use is limited to about three hours daily.
You have been warned.

My magic mouse wont scroll after downloading mountain lion

i downloaded the new mountain lion software to my iMac 27" but now my mouse wont scroll, the batterys are 100% and i have tried in the menus to turn it off and on and also tried disconnecting my mouse then repairing but no luck!

Look in System Preferences > Accessibility > Mouse & Trackpad on the left > Mouse Options... button > Check Scrolling.

Mighty Mouse wont scroll?!?

Hey guys... for some reason my Mighty Mouse quit scrolling down today. It will still scroll up but not down. I can't feel anything when I scroll down that makes it seem like its catching something, so I am cluecless. Any ideas?!

Use this article first: http://docs.info.apple.com/article.html?artnum=302417
I have to clean mine a couple of times a month, when the above cleaning method doesn't work I resort to more drastic measures. I use a small amount of Rubbing Alcohol on a clean old t-shirt to clean the ball and then blow it out. I have done this many times in the last year, works well with no ill affects to the mouse.

My mouse wont scroll

the rolly ball on my mouse wont scroll down, it scrolls up & both ways sideways
but not down... i swear, like 5 minutes ago it was fine, then all of a sudden it just stopped scrolling. Its brand new like 2 months ago... what is wrong,
some one help please!!
iMac w/intel core duo Mac OS X (10.4.6)

You need to clean the ball.
Take a damp rag (lightly dampened with plain water), and roll the ball in all directions with the surface of the damp rag.
After several scrolls in each direction, the ball will be cleaned of the oils from your fingers.
It should start working again after that.
Basically, the oils from your fingers build-up on the ball, and it slips past it's sensors instead of rolling against them.
This is pretty common with trackballs and scroll-wheels.
Hope this helps.

Horizontal Mouse-Sensitive Scroll

Similar Messages

Maybe you are looking for