Horizontal scrolling problem

Hi there I wanted to ask how to fix an issue about Muse. I want to create a "responsive navigation bar" and I didn't figured out a way, the only thing that I could do is to make a very large rechatangle (ex. with wight about 8 or 9K). That thing works very well BUT I'm now able to scrol horizontaly in the web page. Any fix for this guys, thanks!!! :))))

Actually I found a way to do what I've wanted. I wanted this:
And I have made it with this:
Thanks everyone who wanted to help. Sorry for the stupid question.
Best regards everyone!!!!!!

Similar Messages

Horizontal Scroll Problem in Rendering in After Effects

I am having a 30 minute video in which i need to ADD a horizontal scroll till video end, I made a JPG file of 6000px width and 40px height. Place it in a comp with horizontal scroll effect with -70 speed and adding this code in tile centre expression.
offset = effect("Autoscroll - horizontal")("Speed (pixels/second)") * (time-inPoint) * (100/scale[0]);
reset=thisLayer.width*10; //reset after 100 times the width has been scrolled
[(thisLayer.width/2 + offset)%reset, thisLayer.height/2]
Now when i check it in Ram preview it works fine but when i render it via AME then it stopped somehwere like
8.20 minute - 13 minute
19.52 minute - 22 minutes
between this time scroll doesn't work. Please help me how to solve this problem, It's really urgent for me I need to complete a project.

I'm not sure what is going on but a better workflow may be to create the scroll as a separate AE comp by pre-composing it, then render and replace in your comp or add the scroll in Premiere Pro and render your deliverable from there.
It looks like you want the scroll to repeat. The repeat may be where the problem lies. Another approach would be to have your scroll move once, trim the layer to the end of the scroll, Pre-compose trimming the pre-comp to the length of the layer, and then either loop the pre-comp in your main comp using time-remapping and loopOut("cycle") in time remapping, or render and replace the pre-comp and loop the footage indefinitely in Footage Interpretation.
I tend to to simple title scrolls on Premiere Pro because it's so easy if it's just text and it renders a lot faster than from AE.

HP 5-button mouse comfort BR376AA - Driver & Horizontal scroll problem

Hi all,
I have a problem with HP 5-button mouse comfort BR376AA. Operating System Windows XP SP3 32bit
I installed driver
Released: 2011-06-29 File name Release_WW_Setup.exe [1/1, 28.25M]
from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=DA-89892-1&cc=us&dlc=en&lc=en&...
But in HP Mouse control center-> menu Buttons, text box Connected Device is message: No mouse has been detected
In Control Panel, Device manager, Mice is HID-compliant mouse only, no HP mouse
Horizontal scroll does not work.
I didn´t find any alternative driver.
Could anyone help me please?
Thanks

@Jara1
Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP

DataGrid Horizontal Scroll Problem when datagrid contains Item renderer

I have datagrid with horizontal scroll policy enabled. Grid
contains some item renderer also.One of the item renderer is
datefield when i select a date from the datefield and say the
adjacent cell of the grid also contain datefield itemrenderer
and i am selecting date from that itemrenderer also.When i
scroll horizontally the date in the itemrender changes to any one
of the two itemrenderer.Some time it works fine.I am getting the
issue for combobox itemrender also.Can any one help me to solve
this issue.

"happybrowndog" <[email protected]> wrote in
message
news:ge11ag$jdo$[email protected]..
>
quote:
Originally posted by:
ravi_bharathii
> I have datagrid with horizontal scroll policy enabled.
Grid contains some
> item
> renderer also.One of the item renderer is datefield when
i select a date
> from
> the datefield and say the adjacent cell of the grid also
contain datefield
> itemrenderer
> and i am selecting date from that itemrenderer also.When
i scroll
> horizontally
> the date in the itemrender changes to any one of the two
itemrenderer.Some
> time
> it works fine.I am getting the issue for combobox
itemrender also.Can any
> one
> help me to solve this issue.
>
> Ravi, I am having a similar problem. I subclass a
TextInput as an
> itemrenderer for a column in a datagrid. My subclassed
TextInput checks
> to see
> the value in the overriden set() method, and depending
on the value, sets
> the
> background color of the TextInput to green. When the
datagrid scrolls
> horizontally, some unrelated cell colors also change
green and some of the
> data
> gets duplicated in the cells. The underlying data
provider's data is not
> confused however. Seems the rendering is screwed up when
the Datagrid
> scrolls.
>
> Did you find a solution to this problem? I think
Datagrid is a piece of
> screwed up code.
http://www.magnoliamultimedia.com/flex_examples/Amys_Flex_FAQ.pdf
Q2

Problem with Horizontal Scroll on java.awt.List

I use the same code for a General Application as a CDC Application.
I have no problem at all with the General Application but on the CDC I can't scroll to the right (horizontal).
Why do I get this problem on the CDC application and not on a regular application?
I use the PP-1.0 Profile for the CDC application. Does it not support horizontal scroll on java.awt.List?
This is the code:
* Main.java
* Created on den 22 augusti 2007, 10:52
package cdcapplication6;
* @author Erik Rothman
public class Main extends java.awt.Frame {
    /** Creates new form Main */
    public Main() {
        initComponents();
          for (int i = 0; i < 10; i++) {
               list1.add("Short text");
               list1.add("Some very long text indeed. Some very long text indeed.");
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" Generated Code ">
    private void initComponents() {
        list1 = new java.awt.List();
        addWindowListener(new java.awt.event.WindowAdapter() {
            public void windowClosing(java.awt.event.WindowEvent evt) {
                exitForm(evt);
        add(list1, java.awt.BorderLayout.CENTER);
        pack();
    }// </editor-fold>
    /** Exit the Application */
    private void exitForm(java.awt.event.WindowEvent evt) {
        System.exit(0);
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new Main().setVisible(true);
    // Variables declaration - do not modify
    private java.awt.List list1;
    // End of variables declaration
}

I use the same code for a General Application as a CDC Application.
I have no problem at all with the General Application but on the CDC I can't scroll to the right (horizontal).
Why do I get this problem on the CDC application and not on a regular application?
I use the PP-1.0 Profile for the CDC application. Does it not support horizontal scroll on java.awt.List?
This is the code:
* Main.java
* Created on den 22 augusti 2007, 10:52
package cdcapplication6;
* @author Erik Rothman
public class Main extends java.awt.Frame {
    /** Creates new form Main */
    public Main() {
        initComponents();
          for (int i = 0; i < 10; i++) {
               list1.add("Short text");
               list1.add("Some very long text indeed. Some very long text indeed.");
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" Generated Code ">
    private void initComponents() {
        list1 = new java.awt.List();
        addWindowListener(new java.awt.event.WindowAdapter() {
            public void windowClosing(java.awt.event.WindowEvent evt) {
                exitForm(evt);
        add(list1, java.awt.BorderLayout.CENTER);
        pack();
    }// </editor-fold>
    /** Exit the Application */
    private void exitForm(java.awt.event.WindowEvent evt) {
        System.exit(0);
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new Main().setVisible(true);
    // Variables declaration - do not modify
    private java.awt.List list1;
    // End of variables declaration
}

JTabel Horizontal scroll bar problem

Hi,
I want a horizontal scroll bar added to my table
hence I do this
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
but the problem is If I increase the size of frame
the cells do not resize hence there is a gap after
the last column.
How do I remove this gap

Please reduce the container size in the screen thru SE51 that automatically create the scroll
or check whether in the attributes of the screen "Hold scroll positio" not to be checked
a®

Horizontal Scroll bar problem with CL_GUI_ALV_GRID

Hi Experts,
I have created Dynamic ALV by using CL_GUI_ALV_GRID . Everthing is working fine if all the data is displaying in single screen. But if the number of columns increase with the output of data the horizontal scroll bar is not working.
It is visible but when I click to scroll it to the end of screen it is not working. Can anybody help me that what can be the problem?

Please reduce the container size in the screen thru SE51 that automatically create the scroll
or check whether in the attributes of the screen "Hold scroll positio" not to be checked
a®

Horizontal scroll bar problem in Portal????

Hi Guys,
I am facing some problem when i open any thread. Horizontal scrollong bar is coming at the end of the thread.
eg: If i have some text in the thread which is more than width of the screen and has some 10 replies to that thread, Then i should be able to scrool at that position itself. But now i have to scroll down till end of all the replies and then i have to scroll the horizontal bar to right/left and scroll up to particular reply to see what is there.
Is there any enhancement going on in portal or it is specific to my system? Please do let me know.
Thanks,
Vinod.

I too am facing this problem with the horizontal scroll bar.
There are many other bugs, but I am reluctant to spend my time reporting them as last time I reported a problem here, I got a rude response.
Al Lal

I have a problem with interactive report in horizontal scroll bar

hi all,
in my interactive report the horizontal scroll bar is not visible and i have created a scroll bar with the html code and i have a problem in that scroll bar when ever i will click the select list and if i will move the scroll bar and the select list is also moving but it the select list dont have to move .pls give me a solution for this urgent.
thanks in advance

Kishore suresh wrote:
hi all,
in my interactive report the horizontal scroll bar is not visible and i have created a scroll bar with the html code and i have a problem in that scroll bar when ever i will click the select list and if i will move the scroll bar and the select list is also moving but it the select list dont have to move .pls give me a solution for this urgent.
thanks in advance
Hi,
How you think anybody can help if you do not post single line how you have try create that scrolling report ?
And if your issue is urgent, you are seeking help from wrong place.
Regards,
Jari

Problem with horizontal scroll navigation pattern, please help

Hello,
I am trying to create navigation pattern for portfolio website which features horizontal scroll.
Here is a draft of what im trying to achieve:
Home
As you can see it's built based on containers - in every one there will be three photos and as you scroll down the page, the containers go left and you experience horizontal scrolling
The problem I am currently facing is this:
On a 1920x1200 resolution when you are scrolling down (starting from the top of the page), the first container (in the beginning) is in fact going left as I want it to, but at certain point (when it's just a little bit behind page margin) it just disappears. I would like to have the effect of container "traveling" out of view area naturally, so that when u are looking at a second container you could still see the first one and the third one.
In other words I would like these containers to leave the screen in the same way they appear - smooth motion, not the sudden disappear...
What am I doing wrong ?
If I recreate same draft but without using muse widgets for containers (instead I use for example single image) it works OK.
Also I noticed, that if the container is more narrow, the effect doesnt occur - like last conatiner in the exaple, it travels the way I want it to.
Thank you for any advice.
Filip

Please help, still no solution found...

Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

Hi
I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
I hope that was clear.
Thnx

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

Horizontal Scroll bar CSS problem

I am having some issues with my horizontal scroll bar. I
looked up the horizontal scroll properties and I believe I have
them correct? What is happening is on my horizontal scroll bar it
is giving me up and down arrows instead of left and right and yes
my images are correct I have checked them a few times now
Any ideas this is what I have for my css
HScrollBar {
downArrowUpSkin:
Embed(source="../assets/images/leftArrow.png");
downArrowOverSkin:
Embed(source="../assets/images/leftArrow.png");
downArrowDownSkin:
Embed(source="../assets/images/leftArrow.png");
upArrowUpSkin:
Embed(source="../assets/images/rightArrow.png");
upArrowOverSkin:
Embed(source="../assets/images/rightArrow.png");
upArrowDownSkin:
Embed(source="../assets/images/rightArrow.png");
thumbDownSkin:
Embed(source="../assets/images/thumb.png",
scaleGridLeft="7", scaleGridTop="5",
scaleGridRight="8", scaleGridBottom="7");
thumbUpSkin:
Embed(source="../assets/images/thumb.png",
scaleGridLeft="7", scaleGridTop="5",
scaleGridRight="8", scaleGridBottom="7");
thumbOverSkin:
Embed(source="../assets/images/thumb.png",
scaleGridLeft="7", scaleGridTop="5",
scaleGridRight="8", scaleGridBottom="7");
trackSkin:
Embed(source="../assets/images/scrolltrackH.png",
scaleGridLeft="7", scaleGridTop="4",
scaleGridRight="8", scaleGridBottom="6" );
}

Please reduce the container size in the screen thru SE51 that automatically create the scroll
or check whether in the attributes of the screen "Hold scroll positio" not to be checked
a®

OSX Dreamweaver CC 2014 Horizontal Natural Scrolling Problem

Hello, the 2014 release of Dreamweaver CC has reversed the direction of Horizontal scrolling when using "natural" scrolling on OSX.
Vertically, scrolling still acts as I'm expecting, it's just left and right are now reversed from the previous version.

Hi All,
This issue has been fixed in the latest Dreamweaver CC 2014.1 update, which is now live.
We would encourage all of you to give it a try and would love to know your experience around it.
Please read this post (Dreamweaver October 2014 release is now live! Read this first.) before you proceed with the installation.
Cheers,
Subhadeep

Expand horizontal scroll panel on both sides for a zoom in effect

Hi,
I'm creating an interactive timeline with Flash Catalyst. It is set up as a long horizontal scroll panel which contains buttons that link to states with photos and text about historic events. One feature I would like to include is a zoom feature, like the one found on the bbc British history timeline (http://www.bbc.co.uk/history/interactive/timelines/british/index_embed.shtml ). E.g., when you click on a colored section of the horizontal scroll panel it will zoom in to view that timeframe in more detail.
The problem I'm running into is that I can't expand the scroll panel to the left. So, I can go into edit mode for the scrolling content, create a second state, and enlarge the scrolling content in that second state to create a zoom in effect. However, because the scrolling content will only expand to the right, I can't line up the interaction correctly.
Is there a workaround for this in Flash Catalyst?

have a peek at this:
on the left, the corner radius (the red line) is enough to create a curve on the inside of the stroke. on the right, it isn't large enough.

Horizontal Scroll bar in a web table

Guys,
is it possible to have horizontal scroll bar in webtable , not like the webtable propery for each column.
just i want drag a scroll like blanket in webtable like in internet explorer.
will assing full points for fix.
Thanks
Shan

Hi Shan,
The problem is not clear, but if you are talking about a table web item within Web Application Designer then there is a property for the number of columns to be displayed per page. Just set that property to an appropriate number. Remember while setting the property that it applies only to key figures and not characteristics. So if you set it to say 5 - it will display the horizontal scroll option if you have more than 5 key figures in your table.
If you do not want the SAP default scroll bar then set this property to a sufficiently high number so that the table is not broken up - in this case you will get the default internet explorer based scroll bar since the table will not fit in a single screen.
Hope it helps,
Regards,
Nikhil

Horizontal scrolling problem

Similar Messages

Maybe you are looking for