Horizontal separator line between masthead and tool area

hi all
we have customized the portal masthead with our own background image and all.
however the masthead looks fine in IE but in Mozilla it puts a white horizontal line between the masthead and tool area and since our tool area background is not white it looks wierd.
any ideas how i can fix that.
thanks

Rather than use one of the selection tools, try selecting the object with a mask. With the mask you can hide by painting with a black brush, reveal (and correct) with a white brush. I use PSEv.8, so I have to hijack the mask from an adjustment layer, but your version of the program has a mask buit in.
Here is a stock photo of a brick wall for demonstration
http://www.pixentral.com/show.php?picture=1bPkncRl9f24RslkWKdP0NyaYIt9N1
Try this:
Open you picture file
Duplicate the background layer
Convert the background copy layer to black/white
Apply the mask. Left click on the mask
Paint with a black brush where you want to reveal the color. If you go too far, correct with a white brush

Similar Messages

Creating Separation lines between rows of content

I have several hundreds pages from a catalog we are creating that need separation lines between columns to segragate the products. I am wondering if there is an easy way to automate the creation of these.
I tried using the Grid feature ( by drawing a frame and then using the left and up arrow keys to create the grids, but it creates a number of boxes where I need just separation lines.
I can create the seapration lines manually but this takes longer, even if I save them as a snippet and place multiple times.
I am using Indesign CS6
Please see the attached screen shot.
http://www.wdautoparts.com/pdf/page-12-without.pdf
With grids -
http://www.wdautoparts.com/pdf/page-12-with.pdf
Any suggestions for this noob would be greatly appreciated.
Thanks

Not sure whether this fits as a solution to your problem, but reading your post made me remember it:
http://www.indiscripts.com/post/2009/09/introducing-indesign-column-rules

How to add separating line between facing pages when exporting to PDF

Hello,
I've searched a lot and could not find an answer to my question...
I'm creating several multi-page documents with facing (left-right) pages. After that I export these to PDF. I use the same setting for all my files and same settings for exporting.
But one of the documents when exported doesn't have a separating line between the left and right pages and they seem to be one. How can I add this separating line?
Thanks in advance!

Hi Peter, thanks you for your reply. If I understand correctly what you are saying, I would say this is not the case, because both are exported as spreads and both are displayed 1-up. Please see attached screenshots - first two show exporting options and second two show how it will look in Acrobat if both are displayed 2-up.

Urgent :Relation between vendor and business area

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi ,
Is there any table or transaction which will give an one-to-one relation between vendor and business area?
Thnks and Regards,
Anand

hi
in this situation u have to creat new Z table and Z transaction with link of this both . it will solve ur problem . better to take abaper help other wise u can use T-CODE se11 to creat table.
se93 for transaction code .

[svn] 2530: Fix incorrect drawing of line, when xFrom and yFrom are non-zero

Revision: 2530
Author: [email protected]
Date: 2008-07-18 15:44:40 -0700 (Fri, 18 Jul 2008)
Log Message:
Fix incorrect drawing of line, when xFrom and yFrom are non-zero
Reviewed by Ryan
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/Line.as

Revision: 2530
Author: [email protected]
Date: 2008-07-18 15:44:40 -0700 (Fri, 18 Jul 2008)
Log Message:
Fix incorrect drawing of line, when xFrom and yFrom are non-zero
Reviewed by Ryan
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/Line.as

I installed Adobe Web and Design Preium CS6 on windows 8.1, but when I open the program the size of the menus and tools are so tiny. It is not like that for Acrobat, but all the other programs. Is there a fix for this?

I installed Adobe Web and Design Preium CS6 on windows 8.1, but when I open the program the size of the menus and tools are so tiny. It is not like that for Acrobat, but all the other programs. Is there a fix for this?

Thanks for the help. I installed CC and it fixed everything but Photoshop. I guess I will have to use my old laptop for images until Adobe fixes the problem. Do you know of a place where we can send issues like these to Adobe?

Relation between Responsibility and Business Area

Hi,
I have a requirement wherein i have to make a particular workbook available in specific responsibilities.
Now when i have to create a folder then how do i know in which Business Area should i create the folder.
Basically i need to know the relation between Responsibility and Business Area i.e which Business Area i should create the folder so that it is visible in desired responsibilities.
Is there any way possible i can know this.
Regards,
Shruti

Hi,
You can do that in two ways:
1. Go to the administrator and check the sharing BA for each responsibility you require.
2. Query the database to retrieve the sharing.
Do whatever you find easier.
For the database option you can run the following (change it to your own schema name):
select distinct
t.ba_name,
t.ba_id,
t.ba_description,
case when substr(t.ba_created_by,1,1)='#' then fu.user_name else t.ba_created_by end as CREATED_BY,
disco_users.eu_username,
case when instr(disco_users.eu_username,'#')=0 then disco_users.eu_username
when instr(disco_users.eu_username,'#')>0 and instr(disco_users.eu_username,'#',2)=0 then (select fu.user_name from fnd_user fu where fu.user_id=substr(disco_users.eu_username,2,5))
else (select resp.responsibility_name from fnd_responsibility_tl resp where resp.responsibility_id=substr(disco_users.eu_username,2,5))
end as "Shared Name / Responsibility"
from eul_us.eul5_bas t,
apps.fnd_user fu,
eul_us.eul5_access_privs disco_shares,
eul_us.eul5_eul_users disco_users
where substr(t.ba_created_by,2,10)=to_char(fu.user_id(+))
and t.ba_id=disco_shares.gba_ba_id
and disco_users.eu_username(+) NOT IN ('EUL5', 'PUBLIC')
AND disco_users.eu_id(+) = disco_shares.ap_eu_id
Hope it helps
Tamir

Relation between Company and Personnel Area

Hello friends,
Which table i can find the relation between companies and personnel areas ?
I found T001P, but this table has only the relations between personnel area and personeel subarea...
Thanks for your help.

Hi,
Personnel area - company code assignment : V_T500P
Company - company code assignment : V_001_Y
Regards,
Dilek

Top leven navigation and Tool area dissapear after upgrading SP19

Hi all,
we have upgraded the J2EE engine and the EP to the SP19 and when we enter the Portal, the top level navigation and tool area have dissapear.
It could be some parameter wrong or an error during the upgrading?
Thank you in advance for your help.

Hi Rahul,
See SAP Note: 1002832. These are the details:
<b>Reason and Prerequisites:</b>
The problem is caused by a program error.
This note applies to NW04S SP8 - SP10 and NW04 SP16 - SP19.
<b>Solution:</b>
The problem is fixed with NW04S SP11 and NW04 SP20.
The reason for the problem are missing ACLs that are normally created automatically when roles are imported.
In order to resolve this problem please do the following steps;
1 - Logon to the Portal with user having "super admin" rights.
2 - Replace in URL the "/irj/portal" part with the following /irj/servlet/prt/portal/prtroot/com.sap.portal.admin.acleditor.listPermissions.
This starts a component that lists all permissions in the PCD. It might take some time until it is finished.
3 - Please scroll all the way to the bottom of the list. If there is a botton "fix inner acl", click the button. The missing permissions for the roles will be created. If there is no such button, the permissions are OK. The reason for the symptom is something else then.
Hope this helps.
Regards,
Pooja.

What is the difference between Structure and Work area

Hi Guys,
What is the difference between Structure and work area?
Are they same with different names?
Thanks,
mini.

hey buddies,*
i had this same doubt for a long time and i have my finds with me ie wa and structure are the same but wa can hold a single record but structure cannot hold data in it but according to the previous posts folks say structure too holds data as wa does but i guess when debugging wa holds data and structure doesnt hold bcoz i tried.
types : begin of str_mara,
             matnr type mara-matnr,
            ernam type mara-ernam,
            end of str_mara.
data it_mara type table of str_mara.
select matnr ernam from mara into it_mara where matnr = '100-101'.
*********************if folks say wa = structure,this should work,isn't it?*********************************
loop at it_mara into str_mara.
write:/ str_mara-matnr , str_mara-ernam.
endloop.
*******************but it throws an error saying that str_mara is not a wa*******************************
i may not be correct too plz let me know if i'm wrong
Edited by: arun_aime on Feb 12, 2010 4:41 PM

Database Firewall in-line between clients and database not working

I’m trying to configure a Standalone Database Firewall in-line between the clients and the protected database so it can block some statements. I’ve followed the Installation Guide and the Administration Guide, but can’t get it working. I’ve configured one Enforcement Point with one Protected Database.
I’ve configured Database Firewall with three Ethernet cards:
eth0 is used for Management (IP. 192.168.1.81)
eth1 and eth2 are associated with Bridged interface br0
The protected database is listening in 172.16.40.3:1521.
The clients are in subnet 192.168.1.x.
I’ve configured the Traffic Source br0 with the IP 172.16.40.2 and is enabled as the Traffic Source in the Enforcement Point.
In the configuration file appliance.conf corresponding to the Enforcement Point, I’ve seen the parameter PROXYPORT=1534, so I understand the clients should connect to this port in Database Firewall in order to access the protected database. Is this assumption correct? Is the configuration I’ve done correct? Are there any additional configuration steps that should be made? Is there any documentation about this configuration files?
Thanks,
Pablo

For in-line blocking mode to work out of the box it is necessary that DB Client's IPs (as they are seen in DBFW), br0 and DB IP are all on the same subnet. If this is not the case you would need to fiddle with routing on the DBFW manually which you are discouraged to do because it's unlikely to be persistent, work correctly after upgrades etc... DBFW is not intended to be a router although it can be made to perform this function. In general I would advise you to stay within the supported configuration and just make sure you network infrastructure is ready for DBFW deployment. IE make sure all these IPs are on the same subnet

Gap between masthead and toolarea

Hi All,
I am facing a problem of white space( a gap) between the masthead and toolarea when i open the anonymous page which has been customised but when the same page is opened in the preview it appears to be perfect.
i have checked the jsp files of masthead and toolarea but it does not have any Margin attribute such as: topmargin="0" rightmargin="0" leftmargin="0" marginwidth="0" marginheight="0".
can anyone help me on the same.
Thanks,
Gunjan

Hi,
Try to change the Theme of this Desktop, may be there is a mis-configuration in the Theme itself.
Check also this for similar problems with themes:
TLN overlaps with Masthead
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Uniform gap between Caption and Fillable Area

Dear all,
I want to mentain Uniform gap between the caption and fillable area for all the fields.We can adjust the gap manually but it's difficult to mentain uniform for all the fields.Can we do it by Java script or by any other way so that it should exactly same for all the fields.If any body can please help me.
Thanks a lot in Advance
Regards
Rakesh

Dear Jimmy,
Thanks a lot for your quick response.But the size of the caption of the fields i.e. no of letters present in the caption are not same.Suppose one field is Name and another field is Adress.How can I set the the two fields such that the gap between the caption and fillable area for the two fields are same.If the gap will same then the form will look better.I can Adjust this manually but it will not same exactly.
Regards
Rakesh

CUCM 10 Barge/CBarge with shared line between phone and a remote device

Is it possible to configure CBARGE/BARGE feature if shared line is between a cisco phone and a remote device.
When remote device picks up the phone, red light comes up on the phone, if we press the line button to Cbarge, dial tone comes up and the call does not go into a conference.
Has anyone used that feature? Can it be configured?

We are using Lync for tesing purposes.
we tried scenario with Remote device as a mobile phone. Where calls are being sent through SIP trunk to CUBE and then to our provider. Maybe I should add some commands on CUBE router?
Is that feature (CBARGE) designed to work in that scenario when shared line is answered via remote device on CUCM 10.5.1.10000-7. I am suspecting that its not designed to work that way (If its designed to work that way, we will continue on with collecting traces, etc).

Advice needed with lining up lines between parent and subreport

I have a report where the main report includes a box and 6 interior vertical lines. The box and lines start in a group header and end in a group footer. Details has several sections, and one of the sections includes a subreport (suppressed when there is no data) that crosses the interior lines. This report is used by multiple customers on a variety of printers.
Inside the subreport, there are two details sections. One detail section has a background color defined.
When the report is generated and the subreport contains data, the subreport section with the background color obscures the line defined on the main report.
We have tried to work around this behavior by adding matching lines in the detail section of the subreport, but we have been unable to get the lines within the subreport to nicely align with the lines in the main report. We'll think we get it fixed up for one printer, but then they are off on another printer.
We have turned off the background and removed the lines. This gives us a perfectly straight line, but the users really want the subreport to have alternating colors.
What other options do I have?

Non-recoverable read errors per bits read:
Value line CS: 1 in 10**14 (1.065% annualized failure rate)
See http://www.seagate.com/em/en/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-va lue-hdd/
Constellation ES2: 1 in 10**15 (0.73% annualized failure rate)
See http://www.seagate.com/em/en/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-ca pacity-3-5-hdd/
For testing whether everything works as it should, try the Passmark benchmark and Prime95 stress-test.

Horizontal separator line between masthead and tool area

Similar Messages

Maybe you are looking for