Horizontal space under frame??

Hello,
I have a animation rendering of frames at 1920 x 1080.
After I apply a Depth of Field and glow effects to the sequence, a horizontal negative space appears at the bottom of the image.
the only way I can eliminate the space is if I bring the Depth of Field to the top of the effects stack; however by doing this I get an underdesirable noise and blur effect around the edge of the image where the Depth of Field has influence.
Has anybody seen this before? How can I remove this without comprimising the quality of the image??
thanks very much. P

Horizontal negative space? What do you mean by that? Is the image flipped in those areas or the colors inverted? What other effects are involved? Do you use OpenGL? If so, does turning it off improve matters? at what bit-depth do you work?
Mylenium

Similar Messages

  • How can I create a horizontal line under a line of text?

    Hi,
    I have FM 12.0.3.424.
    Does anyone know how to create a horizontal line under heading text that is the width of the page?  Similar to creating a border but without the top and sides.
    Is it even possible?
    thank you in advance!

    Use the "Frame Below" attribute in the Advanced tab of the Paragraph Designer for your heading tag to use a named Reference Frame from your Reference page. If you're using the default templates for your documents, you could try the Single Line selection (or make your own).

  • How to delete black space under my page..

    though the pages seem to be same size, in some of them i've got some black space under them and i cant take it away with the layout buttons
    what can I do?
    thanks

    What's the URL for the site so we can examine it first hand?
    OT

  • Space under flash movies

    Hi All,
    I am having an annoying problem:  when I use swfobject code to embed flash movies, it leaves a space under the movie that breaks the design.  This happens when viewing it in Chrome or Firefox (on a mac), but not in Safari.  I have found that when I just paste in the <object> code alone
    created when I publish the movie out of flash into my HTML document, the space disappears.  I have tried removing all line breaks and extra spaces
    from the swfobject code to no avail.  This also happens when I add the movie in using Dreamweaver CS4 (insert->media->swf) , which uses
    swfobject.
    Here is an affected page, note the space under both the header flash movie, and the main movie under the nav: http://hamptonsdesignstudio.com/index2.html
    Here is the page with just the object code and the desired design: http://hamptonsdesignstudio.com/index.html
    I would like to be able to use swfobject to provide alternate content for
    search engines, but not at the expense of breaking my design. Any
    suggestions ?
    Thanks,
    Colin

    Glad you figured it out.
    It would be good if you could mark this thread as Answered so the folks who help will not need to keep clicking on it.  thanks.
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • White space under table on page how to get rid of it

    I created a new page, inserted a table to fill the page and
    put in a background color. When I look at the page in Dreamweaver,
    there is no white space under the table at the bottom of the page.
    When I preview the page in a browser, the table ends about an inch
    from the bottom of the page and I have about an inch of white space
    under the table. Does anyone have an idea why this is happening?
    Thanks for any help you can give. I'm going crazy trying to
    get rid of it.
    Diane

    Fix up the errors with your html firstly - then see where you
    are at with
    the page....
    The first thing to do would be to get rid of the table
    heights - it's
    invalid and won't render cross browser anyway. Error:
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fhome.comcast.net%2F~moordian%2F
    PS: Are you working on a PC or a Mac?
    Nadia
    Adobe® Community Expert : Dreamweaver
    http://www.DreamweaverResources.com
    |Tutorials|SEO |CSS Templates
    http://www.csstemplates.com.au
    http://www.adobe.com/devnet/dreamweaver/css.html
    CSS Tutorials for Dreamweaver
    "diane7" <[email protected]> wrote in
    message
    news:efa1h5$o12$[email protected]..
    > When I am working on the page in Dreamweaver, I can't
    add content any
    > lower
    > than the gold bar at the bottom. In fact, none of the
    white under the
    > gold bar
    > shows up in Dreamweaver, when I'm working on the page.
    It only shows up
    > when I
    > preview it or publish it. That's why I'm so baffled. The
    gold bar should
    > be
    > the bottom of my index page but that white shows up in
    the published
    > version
    > underneath it. My page properties are set to 0 margins
    on all four sides
    > of
    > the page and the table is set to 0 padding and 0 cell
    spacing, so I don't
    > think
    > that's it.
    > Diane
    >

  • Add horizontal spaces between regions

    Hi everyone,
    We use APEX 4.2.
    I want to know if it's possible to add horizontal spaces between "region a" and "region b" ?
    How I can do this ? I don't want to add an extra "region c".
    I taught about adding something in the header region or in the footer region.
    Thanks in advance. Have a great day.

    Hi,
    You could add some css to the first (left?) regio.
    .rounded-corner-region {margin-right: 50px;}*.rounded-corner-region* depending on the selected regio.
    Regards,
    Kees Vlek
    <tt>Company: http://www.orcado.nl
    Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
    Twitter: http://www.twitter.com/skier66</tt>
    If the question is answered please change it to answered and mark the appropriate post as correct/helpfull.

  • Programmaticallyset vertical space between frames

    Does anyone know how to programmatically set the verticaly space between frames property from the format trigger ????
    TIA

    Sorry, there is no way to do it (at least not in 6i).
    You are limited by the SRW built in packages as to the properties you can set programmatically. I suppose you can create your own packages that may do this if you really want to.
    HTH,
    Steve

  • Removing space under a line chart

    How do I remove the space under a line chart? Its as if space is held for axis labels on the bottom of the chart, even though I do not have any. I ve already set Additional Formatting Options - Bottom Padding and Height. Thanks

    Hi Sophia,
    Id you could send me the screen shot of the chart that would give me better understanding to resolve your issue.

  • Space under photo deletion

    has anyone experience having a blank space under the "trash bin, share, add to" line when deleting photos in Photo Stream?

    No, can't say that I have.

  • Clear white space under layer divs

    Is there a way to clear the white space under layer divs?  See below.  There are three layers, and then another div tag below that that has "Text".  The red area is pointing to the white space I need to get rid of.
    Here is the code:
    <html>
    <head>
    <style type="text/css">
      div.layer1 {
      background-color:lime;
      width:150px;
      height:150px;
      position:relative;
      top:10px;
      left:80px;
      z-index:2
      div.layer2 {
      background-color:yellow;
      width:100px;
      height:100px;
      position:relative;
      top:-60px;
      left:35px;
      z-index:1
      div.layer3 {
      background-color:orange;
      width:120px;
      height:120px;
      position:relative;
      top:-180px;
      left:175px;
      z-index:3
    </style>
    </head>
    <body>
    <div class="layer1">
      Layer One<br>
      Layer One<br>
      Layer One<br>
      Layer One<br>
      Layer One<br>
    </div>
    <div class="layer2">
      Layer Two<br>
      Layer Two<br>
      Layer Two<br>
      Layer Two<br>
      Layer Two<br>
    </div>
    <div class="layer3">
      Layer Three<br>
      Layer Three<br>
      Layer Three<br>
      Layer Three<br>
      Layer Three<br>
    </div>
    <div> Text </div>
    </body>
    </html>

    There is really no such thing as a "layer div". Old versions of Dreamweaver used the name "layer" to mean an absolutely positioned div.
    What you have done is to create relatively positioned divs. A relatively positioned element is moved from its normal place in the flow of the document without affecting other elements.
    Your three divs have a combined height of 370px. As a result, your text is placed that far down the page.
    If you wanted to move it up, you would need to give the Text div an ID and a negative top margin of -170px.
    #textdiv {
        margin-top: -170px;

  • Space under images?

    I get this space unter some of my images or in the divs the
    images are in.
    The pages is here and there is too much space under the logo
    and under the large image on the right.
    http://www.agilitygraphics.com/clients/somerset
    The css for those looks like this:
    .logoCell {
    width: 760px;
    margin: 0 10px;
    background: #fff url(../images/general/frame_top.jpg)
    repeat-x 100% 0%;
    .logoCell img {
    vertical-align: bottom;
    #logo {
    margin:16px 0 15px 16px;
    The html looks like this:
    <!-- Start of logoCell -->
    <div class="logoCell">
    <img src="images/general/logo.gif" alt="The Somerset
    Group" id="logo">
    </div>
    It displays fine in DW, but has the space once viewed in the
    browser.
    What is wrong here?
    Thanks a lot!

    You should be able to resize it in just about any photo/image editing software such as Photoshop, Preview, iPhoto and many others.
    -DH

  • Why is there space under the copyright bar on the contact page?

    why is there space under the copyright bar on the contact page? all the other pages in the site fit flush at the bottom except on the contact and coaching page. does anyone know why? thanks
    http://worldmarketdesign.com/strategic/contact.html

    What I'm saying is that the footer will always follow the content above it.  On short pages, footer may not align with bottom of browser viewport because the page content above isn't long enough to fill the screen.  Since everyone uses different display sizes, this is perfectly normal behavior and shouldn't be a major concern.
    Nancy O.

  • Space under $ORACLE_BASE/$ORACLE_HOME keeps increasing why

    I am on Oracle 10.2.0.4 on HP UNIX 11.2. I am running a program which has an infinite loop. Each loop iteration sleeps for 15 seconds, does some datbase access using jdbc…? I am noticing that space under $ORCALE_BASE keeps increasing. My program is definitely not writing any files under $ORACLE_BASE, so Oracle is creating some files, else how can I explain increase in $ORACLE_BASE. When I stop the program, space shrinks back to original, so looks like file has been deleted.
    My program could have some cursors not being closed, but this will increase the memory of Oracle shadow process and not space under $ORACLE_BASE. Are there any memory mapped files, where shared memory is being mapped to some file under $ORACLE_BASE. I am unable to find any such files using:
    Find . –mtime -1
    I see some Oracle files such as Oracle agent log, listener.log but do not see anything unusual. Can someone explain what is going on and how can I troubleshoot this problem.

    It is a java [program, it does various selects, inserts, updates; it writes its execution log under /gps/twq/db3 and
    ORACLE_BASE is /gpsg/twq/oracle
    bdf shows...
    /dev/vg03/lvtwqstage
                       8192000 6088123 1972403   76% /gpsg/twq/stage
    /dev/vg03/lvtwqoracle
                       12288000 8418465 3637466   70% /gpsg/twq/oracle
    /dev/vg03/lvtwqdb1 8192000 4752239 3225929   60% /gpsg/twq/db1
    /dev/vg03/lvtwqdb4 8192000 5435984 2583829   68% /gpsg/twq/db4
    /dev/vg03/lvtwqexpbkup
                       72466432 22210280 47115159   32% /gpsg/twq/expbkup
    /dev/vg04/lvtwqdb2 66322432 26020448 37783114   41% /gpsg/twq/db2
    /dev/vg04/lvtwqdb3 66322432 26936468 36924350   42% /gpsg/twq/db3
    /dev/vg06/sq_db1   65536000 50530190 14067949   78% /gpsg/getsq/db1
    It is /gpsg/twq/oracle which keeps increasing until program is recycled, then frees up space under /gpsg/twq/oracle..                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Wasted space under Firefox 4 addon status bar

    I upgraded to Firefox 4.0.1. I enabled the add-on status bar, as it was under FF3.
    There is now about 1" of extra unused space under the status bar (the bar is too high at the bottom of the page).
    I ran FF4 with all addons disabled, enabled the add-on bar, and the bar appeared ok with no problem.
    I have probably two dozen addons installed. I disabled several selectively, but the problem remained.
    Any suggestions as to how to diagnose this problem?
    Thanks,
    Fred

    Hi:
    Yes, I have Status4evar installed. However, I found that I can enable the status (addon) bar via View -> Tool bars -> Add-in toolbar.
    Below is a list of my addons. Could you please compare this list with your addon list? If you can provide a list of addons that we both have installed, then I can try to selectively disable those addons.
    Thanks very much,
    Fred
    Leading characters on each line are my notes on compatability. Numeric fields indicate the version of Firefox they claim to be compatible with.
    Leading characters on each line are my notes on compatibility. Numeric fields indicate the version of Firefox they claim to be compatible with.
    Aardvark{3.0}
    6 AdblockPlus{1.3.6}
    Add-onCompatibilityReporter{0.8.3}
    AdobeDLMpoweredbygetPlusR{1.6.2.63}
    AdvertisingCookieOpt-out{1.3}
    AutomaticSaveFolder{1.0.2}
    BackendSoftwareInformation{1.2.8.0}
    BacktoTop{6.0}
    5 BeefTacoTargetedAdvertisingCookieOpt-Out{1.3...
    5 BetterPrivacy{1.50}
    4 BrowserView
    BugMeNot{2.2}
    Closenforget{0.11.1}
    ColorZilla{2.5.5}
    ConfigurationMania{1.14.2011050202}
    Console{0.7}
    CookieCuller{1.4}
    5 CookieMonster{1.0.5}
    3.0 CSSViewer{1.0.3}
    DownloadHelper{4.8.6}
    Downloadstatus{1.7.3}
    DrupalForFirebug{0.0.7}
    ErrorZillaPlus{0.8.1}
    4 ExtendedStatusbar{1.5.7}
    FastYoutubeDownloader{1.2.2}
    xxxxxxxxxxx 3.7 FEBE{6.3.3.2}
    FindAll{3.1}
    5 Firebug{1.6.2}
    Firecookie{1.2.1}
    4 FirefoxSync{1.7}
    FireGestures{1.6.4}
    Firesizer{.2}
    4 FlagFox
    FontFinder{1.0}
    4 FoxySEOTool{0.8.5}
    GoogleAnalyticsOpt-outBrowserAdd-on{0.9.2}
    GrabandDrag{2.8.0}
    Greasemonkey{0.9.2}
    GridFox{2.0}
    HeadingsMap{1.05.7}
    4 HttpFox{0.8.9}
    HTTPS-Everywhere{0.9.6}
    4 Hyperwords{8.1}
    IEView{1.4.5.1}
    JavaScriptDebugger{0.9.88.1}
    JavaScriptDeobfuscator{1.5.6}
    5 KGen{0.8.1}
    LinkStatus{1.6}
    5 LiveHTTPHeaders{0.16}
    LogitechDeviceDetection{1.21.0.11}
    MeasureIt{0.4.8}
    Microsoft.NETFrameworkAssistant{1.2.1}
    4 MorningCoffee{1.33}
    6 NoScript{2.1.0.3}
    OptimizeGoogle{0.78.2}
    3.6 possibly 4 OrganizeStatusBar{0.6.4}
    PageDiff{1.5}
    PageSpeed{1.10.2}
    PasteEmailPlus{3.2}
    5 prefsearch{0.1}
    privacychoicetrackerwatcher{1.0.9}
    4 readitlater{2.1.1}
    5 refcontrol{0.8.14}
    6 requestpolicy{0.5.21}
    restartlessrestart{4.2}
    savecomplete{1.0.1}
    4 searchbarautosizer{1.4.7}
    searchsite{2.0}
    searchstatus{1.36}
    selectivecookiedelete{3.5}
    4 senseo{1.5.5}
    seoblogger{1.0.4}
    seoforfirefox{3.4.6}
    seolinkanalysis{1.0.6}
    seoquake{2.7.1}
    showip{0.8.19}
    x 3.6 siphon-syncadd-ons{0.9.0}
    smartclick <experimental>
    6 sqlitemanager{0.7.1}
    5 stumbleupon{3.81}
    6 tabmixplus{0.3.8.5}
    xxxxxxxxxxxx 3.7 tabprogressbar{0.6}
    5 togglewebdevelopertoolbar{0.6}
    totalvalidator{6.11.0}
    5 urim{0.1}
    5 viewsourcechart{3.02}
    5 wappalyzer{1.13.2}
    5 webdeveloper{1.1.9}
    5 x-ray{0.9.1}
    4 YetAnotherSmoothScrolling{3.0.17}
    Status-4-Ever

  • Changing space under headings

    I need to alter the space under my headings to conform to
    basic typographical principles (i.e. the space above should be more
    than beneath, etc.). I'm using ems for text size in my h and p
    elements and 100% in the body, which gives me good control...
    Anybody have a good solution?

    "Paevo Kelley" <[email protected]> wrote in
    message
    news:fng85s$4u4$[email protected]..
    >I need to alter the space under my headings to conform to
    basic
    >typographical
    > principles (i.e. the space above should be more than
    beneath, etc.). I'm
    > using
    > ems for text size in my h and p elements and 100% in the
    body, which gives
    > me
    > good control... Anybody have a good solution?
    Use margin, for example:
    h1 {margin:20px 0 10px 0;}
    Thierry
    Articles and Tutorials:
    http://www.TJKDesign.com/go/?0
    Keep your markup *clean* with these DW extensions and
    scripts:
    http://www.divahtml.com/products/scripts_dreamweaver_extensions.php

Maybe you are looking for

  • Hard drive noise -- slow computer

    Hi folks. If anyone can give some advice that would be great. My hard drive seems to be acting up. Every so often (probably 4 five-minute periods in 3 hours of use per day) I'll hear loud noises coming from the hard drive (a series of "grrrrs," "beep

  • Want to use Time Capsule as external hard drive / Time Capsule als externe Festplatte

    Can somebody tell me what steps I have to take to use my TC as an external hard drive? Thanks! / Kann mir jemand einmal genau erklären, wie ich meine Time Capsule als externe Festplatte für meine Fotos etc. nutzen kann? Mein 128 GB Mac Book Air kommt

  • Homesharing iPhone Glitch

    I have homesharing setup on both my PC and iPhone. When I try to connect to my PC's library from my iPhone's music app, it connects and shows ALL the songs in the library if I go to the songs tab. But if I go to Artists or Albums tab, it shows less t

  • Getting text to the top of a table cell

    I'm sorry, I have asked this before but I still have nothing that works. In a table I want the text to start at the top of the cell. I can force it with a clear gif and the end, but surely that is not right. It often works OK in Safari and Opera, but

  • Iphone 4 used to be recognized by docs to go premium

    Iphone 4 is recognized in the adding device and says it is paired but doesn't show in the window or say connected. My ipad is connected. Downloaded the newest docs to go on desktop and iphone4. Using itunes 10.2.