Horizontal & Vertical Slides in the same presentation

I have always created slides both vertially and horizontally to be shown in the same presentation. It seems there is no way to do this in Keynote 09. If I create a new slide master, it is still beholden to the document layout. I cannot have multiple layouts in the same presentation. I need this as I have done this analog as long as I can remember (slide trays, etc.).
Is there any way to mix and match V & H slides in one presentation?

Jerry
I have a messy workaround for you:
Create a number of slideshows starting with the first which is say landscape (call it Slideshow A set at 1280 x 720) and the next slideshow in portrait (call it Slideshow B set at 720 x 1280) and continue creating further Slideshow files (C, D, E etc) in alternating landscape and portrait settings as required.
Then link them all up in a chain by selecting any object in the last slide of Slideshow A and linking it to the next slideshow (B) using the Hyperlink option in the Inspector pallet. Use a similar link in the last slide of Slideshow B linking it to Slideshow C etc. Run Slideshow A (landscape) and when you get to it's last slide, click on the hyper-linked object to kick off Slideshow B which should be in portrait etc.
As this is an inelegant solution, I have sent Apple's Keynote team some feedback suggesting they provide the ability to link to specific slides in slideshows (much like the way links can be created to specific slides within the same slideshow).
Hope that helps.
Jai

Similar Messages

  • How do i have landscape and portrait slides in the same keynote file?

    how do i create landscape and portrait slides in the same keynote file?

    You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
    The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set.

  • How can I make two single BI Servers share the same presentation catalog?

    Hi all,
    I have two single BI Servers(not in the cluster).Now,I want the two Servers can share the same presentation catalog. How can I do it?
    Thanks in Advance!

    Select the lines > Format menu > Advanced > Move Object to Section Master

  • Why Levels mid-point slider and Exposure Gamma Correction slider not the same?

    Both the mid-point slider in Levels and the Gamma Correction slider in Exposure adjustment appear to modify Gamma.  They even use the same numeric scale.
    When Gamma <= 1, both sliders appear to produce the same results (confirmed with a couple of random sample settings and using the Difference blend mode).
    When Gamma > 1, however, the results are very different.  Levels produces more what one would expect in terms of moving the Gamma curve without moving the white and black points but the Exposure Gamma Correction slider seems to do something very different, either moving the black point or applying a very different curve the produces much brighter tones in the dark shadows.
    Can anyone explain why and how these two adjustments produce different results?
    Is this a bug with the Exposure adjustment?
    By the way, in my limited tests of this I was just using a standard RGB file in 16-bit mode - nothing fancy like 32-bit or LAB or anything like that.  Also, Photoshop CS6 Extended.  Both 32- and 64-bit versions show the same behavior.
    Thanks.

    The differing gamma adjustment results also occur in the OS X version of Ps 13.0.1
    The situation is worse than you realize, Dennis. Test with a linear grayscale gradient in 16-bit or 8-bit RGB mode instead of arbitrary images. Remember to view at 100% zoom for an accurate display.
    Gamma adjustments of less than 1 performed by Levels adjustment layer and Exposure adjustment layer do differ but to a less obvious extent than when the adjustment is greater than 1. Differences can be seen in histograms, and low level differences when differencing layers can be made more obvious by adding an Exposure adjustment layer with the exposure increased.
    You'll get further different results by using the gamma adjustment in the "Exposure and Gamma" method of Image > Adjustment > HDR Toning. Notice that the gamma value there has to be specified as the inverse of that in Levels and Exposure.
    I haven't bothered to calculate which, if any, of the three gamma adjustment controls gives correct results because that is Adobe's responsibility.
    It's quite ridiculous that a common routine giving consistent and correct results isn't being used for all these gamma adjustments. Code re-use makes software more robust, simpler to test, simpler to correct, leaner and overall easier to manage. But what do I know.

  • NewBie Q : How to make one clickable shape jump to a slide with the same name of the shape (button c_1 to slide c_1 f.e.) .

    I made some clickable placeholders on a masterslide
    Then : a new slide based on that masterslide
    and want to use one script or shared  action that says "on success jump to another slide with te samen name as the button...)
    Sorry for this unusual semantic language.
    But already thanks for answering!
    Lucas
    PS I'm using a trial version to try out a branched interactive scenario. A choice of a user leads tot anothe slide with a video reaction followed by other choices,...)

    Sorry, but I'm not a native English speaker, and I have some problems with your question.
    The only interactive object that is possible on a master slide is a shape button. What do you mean by a 'clickable placeholder'?  Why I like Shape Buttons - Captivate 6! - Captivate blog  explains possibilities with shape buttons.  Maybe the idea to have such a shape button on a master slide is not the best, because you cannot control objects on master slides since they do not have an ID. You cannot give a name to a shape button on the master slide, which means the scenario you are talking about is just impossible?
    Moreover: Captivate doesn't like to have the same name/label to be used for different objects. There are some exceptions, you can have an advanced action with the same name as the interactive object that is triggering that action, provided you label first the interactive object before labeling the action. With  "script" you probably mean an advanced action?
    If you tried to explain what you want to do as detailed as possible, maybe I could propose something. You'll see that my blog is focussed on advanced and shared actions. One other puzzling sentence is 'same name as the button'? Are you really talking about the name of the button or about the label ON the button?

  • How do I unlink two quizzes in the same presentation?

    Hi -
    I inserted one hotspot question into my presentation (with one results slide), but when I enter a new quiz in a later slide the software just appends it onto my existing hotspot question (i.e. it starts with question 2 and uses the aforementioned Results slide).
    How do I fix this?
    Thanks,
    Jared

    Each Captivate file can have only one quiz (think that is even a SCORM requirement). This means that all system variables are counting all questions, and reporting will be for the total score of all questions and scored objects (look at Advanced Interaction  - F9 to see all scored objects).
    What do you really want to achieve? You can show intermediate results, you can customize the quiz progress indicator, lot can be tweaked.
    http://blog.lilybiri.com/question-question-slides-in-captivate
    http://blog.lilybiri.com/question-question-slides-part-2
    http://blog.lilybiri.com/intermediate-score-slides
    Lilybiri

  • Normalizing the Audio on ALL Slides at the Same Time

    Adobe Captivate 7.
    I want to normalize the volume on ALL slides in one operation.  Right now I select Audio>Edit>Project.  The audio editor comes up.  BUT, when I select Adjust Volume>Normalize, it DOES NOT normalize anything until I select (by dragging the mouse across the wave form).  This is tedious and takes forever, not to mention that it seems to "normalize" NOT.  How can I simply tell Captive to normalize the whole project in one fell swoop?  This is really what I would expect it to do, but it does not.  Thanks for any help.

    For that work flow I will always turn to a 'real' audio editor, in my case Audition. Did you try Audacity, which is free? Audio editing in Captivate is rather limited.
    But to answer your question about selecting: use shortcut SHIFT-END to select the whole audio clip. I cannot help you with the 'normalizing' because I never do it in Captivate.
    Lilybiri

  • Why won't linking to other captivate slides within the same project work?

    I have created a Captivate 7 project which needs internal hyperlinking, (ie. the ability to move to particular slides when clicking a hyperlink or hyperlinked object) but the links don't work when I preview them using the preview next 5 slides function. I have tried everything. I even published a test project with various hyperlinks to see if it was just the previewer and they didn't work in the final, published piece (although this was a zipped file, not sure if this is interactive.)
    I need a linked doc and am desperate at this point. Any thoughts?

    Publish completely to a folder on your hard drive. 
    Make sure that folder is set up as a trusted location in your Flash Global Security settings:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
    If the linking still does not work, check quiz settings in your project to see if you have backard movement allowed and set Quiz > Settings > Required drop down to Optional.  Sometimes internal jump links don't work because navigation options are limited by these settings.

  • Trying to copy and paste objects in keynote 6 I only get a hyperlink when pasting. Anyone else having the same problem? is there anywhere I can change it so that the copied object is pasted directly into the new slide?

    Hi
    I am trying to copy one object from one lside to another slide in the same presentation. The only thing I get when pasting is a hyperink. Does anyone know how I can turn this off so that the image or the object is pasted as copied to the new slide?
    Thanks a lot

    there are some unexpected issues when copy and pasting.
    As a workaround, use duplicate slide to get the same object in another slide, (select the slide in navigator and command D or right click > duplicate)

  • Can you open multiple windows of the same Keynote presentation?

    Like you can in PPT, where you can go Window > New Window, and see more than one slide at once of the same presentation in the large view. If there is any way to view more than one slide at time, in the large view, please let me know.
    I know about Light Table, and that's useful but I really want to be able to open multiple instances of the same presentation like I could in ppt.

    Thanks, I will. It seems like such an obvious thing, yet I could not find anyone referencing it anywhere. I thought I was the only one who used ppt (or now keynote) that way. Otherwise it is awesome, so much better than PPT.

  • Inserting an image on multiple slides in Keynote at the same time?

    Is there a way to insert a logo on multiple slides at the same time in Keynote?  I have a standard presentation but put the logo of the company I am working with on each slide (in the same spot) one at a time.  It takes a while with 130 slides.  Any thoughts?

    Use  two presentations  to create the presentation:
    presentation 1 containing slides 1-30, 32-45, 56-70 using the slide master containing the logo
    presentation 2 containing the remaining slides using the slide master without the logo
    once designing is complete, drag and drop slides from presentation 2 into the navigator panel of presentation 1
    Navigator panel is the side panel on the left

  • Audio played over more than 1 slide, but less than the whole presentation?

    Anyone know how to have music play over, let's say 3 slides in Keynote 09?

    The question, as posed, could be interpreted in many ways.
    2 possible solutions:
    - combine the elements into a single slide and use Build and Action transitions to present the visible, and have the audio (pre-recorded) also imbedded.
    - create a separate slideshow of the sub-set, export it to a QT movie, then bring the movie into a single slide on the main presentation.
    Solution 1 is probably best as there are problems with Keynote exporting to QT, depending on the characteristics of the slideshow. There are many other posts highlighting these problems.
    A lot also depends on what you want as a final product - e.g. a presentation to deliver live and on stage? a movie to be distributed? Spend a few hours reading the postings of others. You'll find it to be a good investment.

  • Can I create a Flash button and use it to navigate to the next slide of a PowerPoint Presentation?

    Hello all,
    I've been having a bit of a hard time understanding how to get a button which I have created in Flash to navigate to the next slide of the PowerPoint presentation which it has been added into. I'm fairly new to Flash, so I believe that this is slightly out of my natural skill range, so hopefully someone will be able to help.
    I understand that I somehow need to make use of fscommand in ActionScript, but I'm not sure how I can get Flash and PowerPoint to communicate between themselves. If anyone could write a walkthrough on how to do this, I would be bery grateful.
    I'm using Flash MX 2004 7.0 and Powerpoint 2003.
    Thanks

    Hi. Why not to make the whole presentation in FLASH? What you have to do is to import all the slides inside FLASH. Then place one by one in the stills and then create the code to make the stills advance and show the slides by means of the button. The code for the button goes as follows:
    on (release) {
        nextFrame();
    to introduce this code make sure you press the button and no the frame.
    Then in order to make the presentation open and cover the screen, no matter how big it is, you need to enter the following code in the first frame:
    stop();
    fscommand ("showmenu",false);
    fscommand ("fullscreen", true);
    You will need also a button to quit the aplication. This is the code:
    on (release) {
         stop();
    fscommand ("quit");
    Now write all of this in your application and let me know your experience. MamenFLASH$

  • Vertical slides

    I am using both horizontal and Vertical slides in a slide show and have figured out that I can make a Master Slide and drop in an Image and then push and pull the tags of the image to make it fit into the slide's dimensions.
    Master Slide > Black
    Drag m Image into your new Master Slide and push and pull the corners of the image until it fits the whole slide in the Horizontal mode.  ( The Vertical slide will resize to fit  into this place)
    Keep Master Slide selected:
    Then FORMAT>ADVANCED>DEFINE AS MEDIA PLACEHOLDER
    You can also make this Image the one that fits all Master slides,
    Now you can make a New Slide and your Master will have a PLACEHOLDER to drop your images into and they will rezise themselves to fit into your cropped Master Slide.
    The problem is that you have to drop an Image into this Place Holder from your list of Images ONE at a time.
    New Slide
    ( Double Check to see that the Master slide you created is Checked on the "Masters" icon on the toolbar)
    The New Slide will have the image you used to crop to fit into the slide space..
    Since the Horozontal Image can fit over the whole Slide, when you drop in a Horizontal image into the PlaceHolder, it will resize it to fit into your Master Slide.
    Also If you drop a Vertical Image into the NEW slide PlaaceHolder, the image will be resized to fit to the TOP and Bottom of the Placeholder and let the sides go where they will and leave the rest of the slide black.
    How do I Automate this so all I have to do is DROP a FOLDER of images on the Light Box and let the computer do all the work>??

    Jerry
    I have a messy workaround for you:
    Create a number of slideshows starting with the first which is say landscape (call it Slideshow A set at 1280 x 720) and the next slideshow in portrait (call it Slideshow B set at 720 x 1280) and continue creating further Slideshow files (C, D, E etc) in alternating landscape and portrait settings as required.
    Then link them all up in a chain by selecting any object in the last slide of Slideshow A and linking it to the next slideshow (B) using the Hyperlink option in the Inspector pallet. Use a similar link in the last slide of Slideshow B linking it to Slideshow C etc. Run Slideshow A (landscape) and when you get to it's last slide, click on the hyper-linked object to kick off Slideshow B which should be in portrait etc.
    As this is an inelegant solution, I have sent Apple's Keynote team some feedback suggesting they provide the ability to link to specific slides in slideshows (much like the way links can be created to specific slides within the same slideshow).
    Hope that helps.
    Jai

  • Issue with multiple Edge animations in the same article. Please help!

    We have 3 edge animations in our 3 page article, one in eache page. The first edge animation you view autoplays great, however when you swipe down or up the other animations just wont play. All of them set to autoplay 0.125 with transparent background. It seems that no matter which one you see first, it kills the other two. We tried importing HTML and DPS  from Edge with the same results.
    Thank you in advance!
    al3nai

    I just did a quick test and experienced mixed results. I placed a single edge animation on the first page of a horizontal article, then placed the same edge animation on three pages of the vertical orientation (dual-orientation folio). The edge animation shows up perfectly on the horizontal layout, but only displays on pages 1 and 3 of the vertical orientation. It does not load on page 2.
    I also placed an additional Web Content Overlay on page two connecting to a website which loads fine. The edge animation shows the spinning/loading icon but nothing loads.
    Sorry, not much help here just sharing similar bugs.

Maybe you are looking for