Horizontally Flip The Image in the Canvas

Hello and Happy belated Holidays!
Do you guys know how to horizontally flip the image in the Canvas Window? I tried to 'Free Rotate' but that didn't do the trick.
Thanx
Mike

Video filters>Perspective>Flop
x

Similar Messages

When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

Can I crop the image in the canvas

Can I crop the image from the canvas area so I could make several windows to add some video clips or do I have to just reduce the size of the image and make the composite of the videos. i want to make vertical, rectangle and square composite of several video clips.

The Time Remap (simulating the corresponding function in FCP) can do basically 2 things:
a. apply keyframing to the speed of the clip: you can start a clip with speed = 0% (like a freeze frame) and gradually speed up the clip to its end at 100% (standard speed); or viceversa; or start at 100%, slow down to 0% in the middle and back up to 100% at the end. You can apply just any speed variation by keyframing the Speed control.
b. force the clip to play a frame in a time different than in the original clip; for example you want to have some action originally at time 2secs in sync with a drum roll occurring at frame 2,5secs: just keyframe that action frame at 2,5secs. Then the video clip before 2secs will slow down to meet the drum roll at 2,5secs and then speedup to go back in sync at the end of the clip.
A few notes:
- only video is affected, not audio (different from FCE Speed command)
- the clip length does not change
- to see the result in the canvas always render: what you see in the viewer is not the final result.
- instructions on its use are in the download page - if they are not clear let me know.
As a suggestion you can read Ken Stone's Time Remap up to Time Remap in timeline excluded. It describes this function as implemented in FCP4, but its principles (and some details) are the same as in my filter.
Let me know...
Piero

How do I fix the timeline so both the images and the timeline are 1080p?

Hello everybody. I'm a relative newbie to FCP, but not totally new to the world of video editing. I've got a problem that I hope somebody out there can assist me with.
I've shot a lot of footage in HD (1080p) and have imported everything into a timeline. I've performed all my edits, transitions, music integration etc - now when I go to output the footage I realise I've made the mistake of doing everything in a 576p timeline.
I've figured out how to resize the timeline, but all the clips appear in their original 576p resolution in the middle of the canvas (ie huge bars around the image)..
My question is simple enough.. How do I fix the timeline so both the images and the timeline are 1080p? Is there a method to 'resize' all the clips to the new timeline? Will this resize the 576p clips or will they still be native 1080p?
If importing all those clips into the original timeline has destroyed pixels, then resizing to 1080p is definately not what I want to do. I want to retain all the resolution of the original clips.
Any advice would be very much appreciated. I've created nearly 300 edits in this timeline, not including all the effects and transitions. If I have to redo all this because I set up the timeline incorrectly I'm going to be rather upset!
Thanks everybody.

If you captured the footage as 1080 then the fastest way to re-size all the clips back to 1080 is to select all the clips on the time line and then in the menu bar go to Edit -> Remove Attributes. This will pop up window asking which attributes you want to remove. I would try checking the Basic Motion and Distort attributes and click OK. This should pop everything back to their original size and shape.
However, this will also remove any re-sizing or distortion that is intentional (ie to blow up a particular clip so you can focus on something).

I have a macbook pro, a mini display port to hdmi cable to hook up to my tv (a toshiba 1080p flatscreen). what do I do to actually get the image on the tv screen? Do I need another cable for sound?

I am trying to watch a tv show that I purchased into I-tunes. I have the cable and it hooks to the TV okay. The TV shows the regular apple screen that looks like the universe screen - like when it boots up or is doing an upgrade on the OS. I can't get the image to go from the laptop to the TV. I tried under displays and it shows the TV as a display but I can't get the image on the TV.......Please help.

Rwogera wrote:
I couldn't transmit sound either, do i need another cable like Kim said? i mean it cant be transmitted through this HDMI port? as for me i have one of the latest mac pro with intel core i5..tnx
I need to know which MacBook Pro you have. Only mid-2010 and later MBP's transmit sound through MiniDisplay Port to HDMI. I have no information about the Mac Pro, so you might want to go to that Forum and ask there.

Using a devices camera and adding the image to the display list

Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/CameraUI.ht ml
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera/
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
     public class Main extends MovieClip{
          private var deviceCameraApp:CameraUI = new CameraUI();
          private var imageLoader:Loader;
          public function Main()
               this.stage.align = StageAlign.TOP_LEFT;
               this.stage.scaleMode = StageScaleMode.NO_SCALE;
                                 camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
                      private function cameraBtnClicked(event:MouseEvent):void
                                if( CameraUI.isSupported )
                                                  result_txt.text = "Initializing camera...";
                                                  deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
                                                  deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
                                                  deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
                                                  deviceCameraApp.launch( MediaType.IMAGE );
               else
                                                  result_txt.text = "Camera interface is not supported.";
          private function imageCaptured( event:MediaEvent ):void
               result_txt.text = "Media captured...";
               var imagePromise:MediaPromise = event.data;
               if( imagePromise.isAsync )
                result_txt.text = "Asynchronous media promise.";
                imageLoader = new Loader();
                imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
                imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
                imageLoader.loadFilePromise( imagePromise );
               else
                result_txt.text = "Synchronous media promise.";
                imageLoader.loadFilePromise( imagePromise );
                showMedia( imageLoader );
          private function captureCanceled( event:Event ):void
               result_txt.text = "Media capture canceled.";
               NativeApplication.nativeApplication.exit();
          private function asyncImageLoaded( event:Event ):void
               result_txt.text = "Media loaded in memory.";
               showMedia( imageLoader );
          private function showMedia( loader:Loader ):void
               this.addChild( loader );
          private function cameraError( error:ErrorEvent ):void
               result_txt.text = "Error:" + error.text;
               NativeApplication.nativeApplication.exit();

Hi,
Do I have to add the picture to the cameraroll in order to add it to the AIR apps display list?
Both examples from Adobe claim that their examples work. Do they not?
In the example, the event handler asyncImageLoaded is never called. The output text field shows -   result_txt.text = "Asynchronous media promise."; So the Event.COMPLETE is being added. But I don't think it's being dispatched.
Any ideas?

How can I save the images to the iPhone anywhere

Hello I own Time capsule 3 tb. How can I save the images to the iPhone anywhere in Time capsule
note i used fileexplorer when Outside the home isee Outside Message " error connection failed with the error operation time out "
Thanks

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??
I have been using Lightroom 5 for 2-3 months now and all worked well, up until today's effort to import a new set of photos. I am working on a Mac with Yosemite 10.10.1.

Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
Sorry I have only a german version , so don't know what your menu will show.

Is it possible to get the image from the i pad when mirroring via Apple TV to fill the screen instead of appearing as a screen within a screen?

When mirroring, is it possible to get the image from the ipad to fill the screen on the TV instead of appearing as a screen within a screen?

Welcome to the Apple Community.
No, the iPad has an aspect ratio of 4:3, a TV has an aspect ratio of 16:9, to fit one into the other is impossible without distorting the picture. If your TV has a zoom feature, you may be able to use this to fill the screen a little more to your liking, but this will result in cropping top and bottom.

I have one iPhone 8GB. after making upgrade of iTunes and software of iPhone, it's impossible to use the iPhone. There's no service! doesn't acept the code PIN! it only make emergency calls and the image in the phone is to conect to iTunes.What can i do?

I have one iPhone 8GB. After making un upgrade of iTunes and software of iPhone, it's impossible to use it. There's no service! doesn't acept PIN code! it only makes emergency calls and the image in the iPhone is the sign to connect to iTunes. What can i do to solve it?

Where are you and where did you get the phone. This sounds like a classic symptom of someone who bought an iPhone that originated in the U.S. which was then hacked so it would run on a carrier network other than AT&T... Then, when updating the phone, it becare re-locked to AT&T.
If that's what happened, you now own a paperweight. AT&T will NOT unlock them for any reason.
If this isn't the case, please clarify where you are, what carrier you have and where you got the phone so we can begin troubleshooting.

Here's How to change the image on the TOC to be different for each chapter.

Suppose you don't follow the Very Strict default Rule that you use the exact same image parameters (shape, pixels, size, etc.) for your Table of Contents image entry as you use for its associated Chapter, a requirement built in to iBooks Author that applies universally to ALL Chapters under the One Image Size and Location is Best For Everyone rule. Suppose you start adding chapters and messing with each chapter's image and then, later, it occurs to you to get the TOC all set up and when you go there you encounter a mess. Either by chance one of the images you had in one of your chapters found its way to the TOC and, gosh, now every TOC entry for every chapter has the very same exact size and location image! This is not part of your grand plan and then... how to make lemonade here? It's Not Obvious.
You can resolve this in your favor. You must do this patiently.
First, whatever image size is created in any chapter TOC window—by dragging the image placeholder handle re-size box—will apply to ALL image entries (i.e., chapter image entries) in the TOC . If you want maximum flexibility make the image placeholder box big. Hint: you may need to mess with the Edit Mask option in order to get the image placeholder size box in the size and location you want. An option here in preparing your images is to **** with Photoshop or Preview to really engineer the images that will be used for the Chapter Page and, separately, the TOC / these could be the same content images but formatted differently in order to look nice in their respective locations. The Chapter Page image can be manipulated on the Chapter Page. On the other hand, the TOC image must fit within whatever (universal) size you've created.
Plan ahead
Get your TOC images ready.
Loop until done:
a) from the Finder menu, right click on the filename of the image to be put in the TOC / select the menu item “Copy”..this image. This puts the image in the clipboard. Another way to get the image in the clipboard is to pull it up with Preview and pretend to crop it (full size) then command-C. Another way: just click on it if it is in a file somewhere and again command-C.
b) Click on the Table of Contents option (near the top of the left navigation column in ibooks Author ) and navigate to the TOC chapter for this image by clicking on the correct chapter “button” (a white dot in a black background surrounded by a white rounded-corner box) in the center bottom of the TOC chapter window;
c) Click on the image placeholder in this chapter TOC window to reveal the highlight boxes defining the boundary of the image;
d)command-V (paste); Voila! the image is in the TOC. NOTE: dragging the image into the highlighted imagebox (see c) above) will NOT work.
e) mess with the image by clicking the mask editor button so the image fits as desired being careful to move the image only and not resize the image box.
Go back to loop and repeat.

Finally, after a while, I finally found all the procedure explained,
for those who need:
http://www.irisvista.com/tech/laptops/ToshibaS1/tecraS1_1.htm

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

Save for web&.... the image exceeds the size for ....issue with AI on imac i7

Hi,
I just upgraded from using macbook Pro to Imac inte core i7 with 4GB. I use illustrator CS3 for high resolution documents i.e saving a Design for say maybe saving for iphone &ipod skin; a quality jpg that is 1300px(width) by 2000px(height.
General information
The issue is I keep getting the pop up with:
The image exceeds the size Save for Web was designed for. You may experience out of memory erros and slow performance. Are you sure you want to continue?
I click yes, but get another pop up with:
Could not complete this operation. The rastarized image exceeded the maximum bounds for save for web.
And last weekend after NOT being able to save anything I went and bought 16GB memory thinking that this ussue would be solved, but nada.
I have researched around here and google only to find about scratch disk: went to preferences then to plug-ins and scratch Disks -I seem NOT to get to the bottom of this at all.
And this morning I was trying to create a pattern Design and could not even get the design on the color swatches as I have done before with macbook pro with 4GB -IT'S NOT FUN, because I am NOT doing it right. Do you care to help me out?
Thanks a whole bunch in advance
//VfromB

Are you including a color profile? What metadata are you including with it?
How many pixels (h x v)?
50 kb is not all that big. Does your image have a lot of detail in it? Content can affect final compressed size.
-Noel

How to SAVE the images in the offline adobe form pdf

Hi All,
Actually I am working offline adobe forms.In my one of the requirement user want to upload the images in the final output pdf form. For this requirement I added Image Field in the layout. So, now I am able to upload the images from desktop but I am unable to save the uploaded images in the pdf form.
Please let me know is there any parameters need to pass for this requirement.
Please help me ASAP and your help will be appreciated.
Thanks,
Ravi.

Hi Sandy,
Sorry for Delay.Could you please provide script code for the Button and in which event we want to add the code
I want to Save the lot of images in the PDF. For that I kept Image field in the form.Here I am able to upload the images but those are not saved.
If possible please share the details document.
Please help me.
Thanks,
Ravi.

Horizontally Flip The Image in the Canvas

Similar Messages

Maybe you are looking for