Horrible monitor quality all of a sudden

I have this 1080p monitor I use, connected with mini display port to HDMI and it was working great, but the colours were slitly less vivid, but nothing to worry about. I decided to change them, went to the display pane and it was 1080p with 60 hertz for the refresh rate (NTSC). Ok, great. I clicked on the refresh rate to see if there was another one, there was only PAL so I clicked back on the NTSC option. After that, quality went from Full HD to nothing. Any tips on what can I do?

Reset the PRAM:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex

All of a sudden I have horrible coverage at home.

All of a sudden I have horrible coverage at home. Everyone says I sound like a robot but I hear them just fine. My wife is experiencing the same issue. iPhone 5 and 5S.

Thanks for the zip code FlashmanB. I totally understand your concern, I've been there myself, but working together will help get to the bottom of this. What happens when you use cellular data only? Does this happen only indoors, specificly in your home? How do other phones on your account function?
Furthermore, please clarify what the specific problems with service are in this case? You mentioned one bar of signal, how is that impacting calls, text or data?
AdaS_VZW
Follow us on Twitter @VZWSupport

No playback on second monitor all of a sudden (on several computers here)

Hey Guys,
Just yesterday several of our computer were all of a sudden not able to display playback on their second monitors...
This is very strange considering nothing was changed. Everything is set up correctly, with the monitor switched on and displaying the desktop.
Any help would be greatly appreciated.. at the moment I have resorted to displaying the program monitor on the second one.

Thanks Kevin!
I followed the instructions in that link you sent and that seems to have tricked it back into working...
Here they are below for anyone with troubles:
"I talked with Tech support and they were able to help me solve the issue. The solution involved moving my program onto the second monitor and then reversing the option setting (Ie, make the primary monitor my playback monitor)... after that I switched it back by moving the program to the primary monitor and set the secondary monitor as my playback monitor. Seems to work fine now.

Horrible reception & dropped calls all of a sudden...

Hi there,
I have had my Galaxy S4 since Oct 2012 and have never had any issues. All of a sudden, I now have no reception and I drop calls 10 times every 5 minutes. My phone NEVER had issues until about 2 weeks ago. Could it correspond with the recent software update? SO incredibly frustrated, I cant even use it to make calls and the MMS or group texts wont send. Is anyone else out there having this issue?!!
Thanks
Vanessa

kj0407,
Dropped calls are a serious no-no in our neck of the woods. And we want you to have service all of the time. May I ask if this is only indoors or if you're just referring to your home area? If it's only indoors, I do have to be honest in saying that no wireless provider can guarantee coverage indoors due to building material and other environmental factors. However, we do have indoor solutions to help http://bit.ly/AKkC
EvanO_VZW
Follow us on Twitter @VZWSupport

IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
Marco

Hello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

All of a sudden (video) files added to my iTunes library after a certain date aren't playable on other devices.

hello!
All of a sudden I have a weird issue with playing video-files added to my iTunes library after a specific date.
This is the situation so far:
I encode the video for iTunes with the same settings for the last 3 years. I know these vids play on all my devices. AppleTV & iPad. All of a sudden videos added to my library after the 8th of september aren't playable on my AppleTV and iPad. I can play them directly in iTunes and by accessing them directly via the finder and quicktime.
The following errors occur:
When I pull the video from iTunes on my AppleTV.. the video simply doesn't play.
When I pull the video from iTunes on my iPad I get a message that the file can't be found.
When I push the video from iTunes to the AppleTV using airplay I get a message that there has occured an error while connecting to the AirPlay-device "Apple TV". The necesary file could not be found. In addition when the AppleTV is switched off it doesn't turn on doing this, suggesting that there is something missing on my mac itself.
All the above errors aren't popping up when I choose a video that has been put in my library before the 9th of september. Then everything works as expected.
This is what I tried:
Turning off and on home sharing on all devices including the mac.
Logging in wiht a different apple ID though using the same ID as before.
I created a new iTunes library and populated with a video that was added after the 8th of september and one that was added before the 9th of september. Surprisingly the older one played and not the newer one.. while they both used the same encoding settings. The new library was locally on my mac as my original library is on a NAS.
I encode my videos with Quicktime 7 Pro using the following settings:
H.264 (current frame rate, key-frames:automatic, re-order frames, automatic bitsize)
Medium Quality
Multi-pass
current resolution (which is always 1280 X 720)
AAC sound
44.100 kHz
128kbps
I'm using the Mountain lion 10.8.2 and iTunes 10.7 Mountain lion got updated a few days after 19th of september and iTunes i think as well. Both versions were released after this issue seemed to pop up.
I also have two video-files encoded on the same day with the same settings that dragged into the iTunes library on the 9th of september. One works.. the other doesn't.
So I wonder if there is somebody out there that can tell me what might have happened here and how I could fix this issue.
Thank you in advance.

Hi Seraphiel07.
I have a very similar issue. Hardware involved:
Apple MacMini (Mid 2011) - OSX 10.8.2. iTunes 10.7. Home Sharing enabled.
Apple TV (3rd Generation). Home Sharing (access) enabled.
Apple MacBook Pro (15" Mid-2009). OSX 10.8.2. iTunes 10.7. Home Sharing enabled.
Apple iPad 2 (Wifi only). iOS 6
Apple iPhone 4S. iOS 6
All connected through:
Apple Time Capsule 8.0211n (4th Gen)
I have an iTunes library on the MacBook Pro, shared over "Home Sharing" and another (duplicate content, different library name) iTunes library on my MacMini, which is also accessed through the Apple TV.
All software is current (as of Sep 26th).
All movies are iTunes purchases. 80 in total.
All files are purchased (and home shared) under one account.
My last two iTunes purchases both HD movies on 09/17/2012 and 09/05/2012 refuse to appear on any device accessing either of the two Libraries over Home Sharing. It should be noted that every other movie (the other 78) all show up and play correctly. I therefore know it is not an issue with connectivity, otherwise I would see zero movies available.
I have:
1. Removed all content from each Library and re-added
2. Upgraded the OS on the MacMini 10.8.2
3. Tested viewing the two missing movies on other Apple devices and no luck.
4. Turn home sharing on and off within iTunes and also on each device.
It would appear to me that the issue is with the files themselves, rather than the devices as different devices and different versions have been tested.
All comments welcome.

Ipod not working at all...all of a sudden

I had my 80 gb Ipod video, 5th generation for about 2 weeks. It has been working fine up until yesterday, when all of a sudden I was in the middle of a song and I pressed menu to go back, but it wouldnt go. So I simply restarted it, and it was working fine. Then today, the same thing happened, except this time it wouldnt restart. So I pressed menu again, and about 30 seconds later it responded to my command. Then I would press several buttons, and it would take about 30 seconds before it woudl do what I would press. So I finally decided to let it sit for a while and maybe "process" or whatever it needed to do. So i decided to go to shuffle songs, and it (after a little while) went to the now playing section and showed the first song and the play button up top, but there was no audio, and the second counter wasnt going, however it was shuffling through the songs every once in a while... So I decided to turn it off, and it wouldnt turn off, and after holding the off button and releasing, the battery monitor would drop significantly. So after several attempts to shut it off and try different things, I decided to leave it alone for a little while until I got home. I got home and it was off, and I turned it on and the little sad face thing came on telling me to come here. So Im hoping someone can help me. I plugged it into my computer, and ITunes does not recognize it, neither does my windows explorer system. I tried the 5 "r's" and they arent helping. I took it back to circuit city, and he said I would have to contact customer support or whatever, but its to late for that since they are closed. I am hoping one of you can help. Feel free to ask any questions, I am trying to be as descriptive as possibnle, but I am new to the ipod, so I dont know alot. Thanks for your help
Jeff

I tried what the page said previously and even again, and it hasnt changed anything....that page shows the ipod in the menu...mine is not even in the menu, it just keeps rebooting and going into the sad face. Its doing that even when I am not pressing anything, and it also does that when I try to force it into disk mode. Thanks for your tiem...
Jeff

Macbook Pro was cool at first, 5 days later all of a sudden its a microwave

I have looked for anyone else who has had this happen to them and so far havent found anything. I know alot of peoples Macbook Pro's are hot, but the issues for them seem to be from the start. i got mine 5 days ago (31/5/06) and it was fine, no exessive heat issues etc. All of a sudden yesterday night though it has started getting really hot, i mean so hot that you seriously cannot touch the bottom of the thing. I promis i am not blowing this out of proportion. Even when the system is at idle it gets really really hot. I didnt do any software upgrades yesterday so im sure it has nothing to do with that, and as of the day i got the computer all my firmware etc was fully upgraded. Has anyone else experenced the same sudden increase in temperatire? I am worried its going to cook its self! I am seriously thinking about sending it back to see if apple can fix it because the heat of the thing bugs me for the whole time i use it. I would even go as far as saying that using my Macbook Pro is an unpleasant experience because i am constantly worried that at any minet it will fry its self and die. Any advice would be appreciated. I will Call apple technical support and get their take on the situation and then repost what i find out. Thank you
Macbook Pro 2.16 7200rpm Hd Mac OS X (10.4.6) Boy is It Hot
Macbook Pro 2.16 7200rpm Hd Mac OS X (10.4.6) Boy is It Hot

While this is happening to you, open up Activity Monitor and check for a runaway process. This happened to me once and I found out that for some reason, MS Word had started and was consuming both cores. The result was slow response and very hot computer. Maybe you have some application that is starting and running away?
MBP & Mac Mini Mac OS X (10.4.6) http://www.therottenapple.net/phpbb

IMac running extremely slow all of a sudden

I have a 1st generation Intel iMac (24", late 2006), which ran fine for three years but all of a sudden slowed to a crawl about a month ago. I upgraded to 3GB of RAM, but didn't see any improvement; I've run the disk utility app on the system install disk and didn't get any problems; I don't see anything in the Activity Monitor that's hogging CPU usage (although iTunes uses about 7% while playing music and 20% while playing video - considerably higher when it loads a new track into RAM); and I have 70GB free on a 300GB hard disk. I realize that this is just scratching the surface, so what else should I be looking at? For what it's worth, yes I have an HP printer, but the drivers don't seem to take up that much CPU time; and I'm still on 10.4.11, so maybe it's just time to upgrade to Snow Leopard; but either way I've been on this system (and with this printer) for a long time, and I don't understand why this would happen all of a sudden...
Thanks!
Message was edited by: Astigmatism

HI,
70GB free disk space could be at least part of the problem for the disk slowing down.
Try Freeing space on your Mac OS X startup disk
Check the startup disk for errors that may need repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
How to Force Background Maintenance
One way to free up disk space...
Open Console. Select system.log then from the Menu Bar click Reveal in Finder then move that log file to the Trash. These logs can take up as much as a GB.
Carolyn

Running really slow all of a sudden

what could be the problem. all of a sudden it is running very slow and occasionally even Finder is not responding. is there a disc clean up or something that i could run to help clear up this issue?

Derek,
Open Activity Monitor in your Utilities folder, and let us know what process is hogging your CPU.
;~)

Slow All of a Sudden

I've tried everything I know to correct slow performance. All of a sudden my computer is running really slow. Even if only firefox is open, video playback with webbrowser is stuttering horribly. I would really appreciate help.

I don't have a definite answer, but I suggested in another thread, with someone who says their PowerBook works fine sideways (?), that it may be due to your SMS, or Sudden Motion Sensor, in your PowerBook which would make it a hardware issue.
However, that is, if your model was equipped with that, on later PowerBooks.

My mac is running vert slow all of a sudden

I reinstalled 10.7.4 last month with a clean install today my mac mini is very slow all of a sudden. I have made no changes and have not installed any software since the clean install. When I click on anything the mouse cursor becomes the rainbow circle for 1.m16 seconds (sorry tried to give you guys exact info but i only measured it once:)
What i tried up to now:
I tried to boot the mac with cmd r and reinstall. However the moment it connects to the internet the mothing happens i let it run for 2.5 hours and the blue bar did not even give me 1% (my internet on my mac air has no problems.
I checked disk utility and checked disk permissions and repair disk. both no problems
I ran activity monitor and here is the info.
Activity monitor"
memory free 50gig of 150
RAM free 1 out of 3 gig
CPU
user 1.5%
system 1.50%
Idle 97.00
system memory
free 1.02 gb
wired 593.6 mb
active 661.9
inactive 766
disk activity
2.73 gb data read
1.11 GB written

Thanks for your reply! This is it i hope.
17/08/2012 22:58:18.206 UserEventAgent: get_backup_share_points no AFP
17/08/2012 22:58:20.203 mds: (Normal) FMW: FMW 0 0
17/08/2012 22:58:20.652 airportd: _processDLILEvent: en1 attached (down)
17/08/2012 22:58:20.000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
17/08/2012 22:58:20.701 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
17/08/2012 22:58:20.702 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
17/08/2012 22:58:20.717 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
17/08/2012 22:58:22.000 kernel: 00000000 00000020 NVEthernet::setLinkStatus - not Active
17/08/2012 22:58:22.729 configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
17/08/2012 22:58:22.729 configd: DHCP en1: INIT-REBOOT transmit failed
17/08/2012 22:58:22.739 configd: network configuration changed.
17/08/2012 22:58:22.757 configd: setting hostname to "richards-Mac-mini.local"
17/08/2012 22:58:23.615 rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
17/08/2012 22:58:24.263 com.apple.launchd: (com.apple.netbiosd[90]) Exited abnormally: Hangup: 1
17/08/2012 22:58:26.961 com.apple.launchd: (com.apple.netbiosd) Throttling respawn: Will start in 5 seconds
17/08/2012 22:58:26.000 kernel: Auth result for: 00:19:15:d0:d0:bd MAC AUTH succeeded
17/08/2012 22:58:26.000 kernel: AirPort: Link Up on en1
17/08/2012 22:58:26.000 kernel: en1: BSSID changed to 00:19:15:d0:d0:bd
17/08/2012 22:58:28.000 kernel: AirPort: RSN handshake complete on en1
17/08/2012 22:58:29.015 loginwindow: Login Window Application Started
17/08/2012 22:58:30.108 configd: network configuration changed.
17/08/2012 22:58:31.102 ntpd: proto: precision = 1.000 usec
17/08/2012 22:58:34.116 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
17/08/2012 22:58:34.117 UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
17/08/2012 22:58:34.117 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on WLAN_D0BD because it is protected and not on the exception list
17/08/2012 22:58:34.119 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
17/08/2012 22:58:34.121 configd: network configuration changed.
17/08/2012 22:58:36.581 com.apple.launchd: (com.apple.xprotectupdater[21]) Exited with code: 252
17/08/2012 22:58:37.443 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
17/08/2012 22:59:38.200 warmd: [warmctl_evt_timer_bc_activation_timeout:260] BC activation bcstop timer fired!
17/08/2012 23:00:30.000 kernel: disk0s2: I/O error.
17/08/2012 23:00:32.977 ReportCrash: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
17/08/2012 23:00:34.378 com.apple.launchd: (com.apple.coreservicesd[57]) Job appears to have crashed: Bus error: 10
17/08/2012 23:00:34.380 mdworker: checkinWithServer(), failed checking in with coreservicesd, err=#-308/0xfffffecc (ipc/mig) server died serverPort=0x0 opts=0x0
17/08/2012 23:00:34.380 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:34.385 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:34.385 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
17/08/2012 23:00:35.607 ReportCrash: Saved crash report for coreservicesd[57] version ??? (???) to /Library/Logs/DiagnosticReports/coreservicesd_2012-08-17-230035_localhost.crash
17/08/2012 23:00:36.768 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:00:36.784 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:00:36.784 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:00:36.784 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:00:47.145 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
17/08/2012 23:01:29.381 loginwindow: _RegisterApplication(), unable to get application ASN from coreservicesd, and this application requires an ASN, so aborting. error=#-1.
17/08/2012 23:01:29.382 com.apple.loginwindow: _RegisterApplication(), unable to get application ASN from coreservicesd, and this application requires an ASN, so aborting. error=#-1.
17/08/2012 23:02:38.676 com.apple.launchd: (com.apple.loginwindow[36]) Job appears to have crashed: Abort trap: 6
17/08/2012 23:02:38.738 loginwindow: Login Window Application Started
17/08/2012 23:02:38.916 WindowServer: Unable to open IOHIDSystem (e00002bd)
17/08/2012 23:02:38.950 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
17/08/2012 23:02:39.031 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
17/08/2012 23:02:39.104 ReportCrash: Saved crash report for loginwindow[36] version ??? (???) to /Library/Logs/DiagnosticReports/loginwindow_2012-08-17-230239_localhost.crash
17/08/2012 23:02:39.195 airportd: _doAutoJoin: Already associated to “WLAN_D0BD”. Bailing on auto-join.
17/08/2012 23:02:39.000 kernel: virtual bool IOHIDEventSystemUserClient::initWithTask(task*, void*, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
17/08/2012 23:02:39.886 com.apple.SecurityServer: Session 100006 created
17/08/2012 23:02:39.889 loginwindow: Login Window Started Security Agent

From time to time my imac is switching off all of the sudden, who knows what it could be?

Once every few days my imac (2010) is switching off all of the sudden. It is happening since a few weeks. Who knows what it could be?

Hello Tommy,
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/

Logic Pro X all of a sudden can't detect input from M-Audio Mobile Pre

I was recording guitars when I had to step away for a while. I closed the lid on my MBP and left. When I came back, all of a sudden, Logic can't detect any inputs coming from my USB interface. I have tried everything from rebooting, switching to the other input on my interface, updating drivers, but nothing seems to work. What's worse is whenever I start Logic with my interface plugged in, Logic gets stuck at Checking MIDI Drivers. If I unplug my interface, Logic would start fine, but if I plug my interface back, Logic won't detect it.
I am using the M-Audio's input while I am using the Built-In Output on the MBP (I don't have monitor speakers). It was working fine before.
I am using a Mid-2012 MBP 15" on OSX Mountain Lion and an M-Audio MobilePre MKII USB interface.

In this exact order
1) Unplug MobilePre
2) Remove it's drivers using the uninstall routine that is in the Driver DMG image ...
Note: If you get a message about it cannot uninstall.. Restart your Mac and then try to uninstall again...
3) Restart your Mac after you have uninstalled the drivers..
4) Reinstall latest drivers......
5) Restart Mac..
6) Wait until Mac has restarted and then plug in MobilePre...
It should then be correctly recognized and work....

Horrible monitor quality all of a sudden

Similar Messages

Maybe you are looking for