Horrible noise when CD import finishes.

Does anybody know...
How do I stop the noise that happens when a CD import is finished? It interferes with the music I'm listening to.
Thanks.

It's not that loud/disturbing.
Oh, yes, IT IS...
Two days ago a nice three-tone sound, announcing the end of importation, turned into 155 mm HE grenade's explosion...
You must have your system volume & speakers cranked
to the max.
Yeah, right...with a preferences option: "enable listening during importation" checked...:-/
Macmini G4/iMac G3 Mac OS X (10.4.7)

Similar Messages

Superdrive makes horrible noise when burning

My Super drive makes this horrible noise when burning cd's or dvd's. Its like a vibration w/ loud noise.. Sometimes when I play dvd, i can hear this noise a little bit as well. Now I've only started hearing this noise once I started ripping dvd w/ a dvd rip program... I dont know if this can be the cause of this noise, does anyone have any advise on how to solve this problem. now I am afraid of burning any cd's, dvd's because I do not want to cause any damage to the computer itself.. Help.....

Hello Muntasir
Maybe try a different brand, the superdrives are very picky about media. I normaly buy only Memorex, Maxell, Sony DVD's and Sony or Fujifilm CDs for the cars CD players. I just think your better off buying them in the 5 packs untill you find out which one's the drive likes.
Dennis
17" iMac Intel Core Duo - 2GB Ram - Mac OS X (10.4.10) - Maxtor 300GB FireWire - Creative Inspire 2.1 - 2G Nano

IBook making horrible noises and now my hard drive is missing?!

This morning my iBook started making this horrible noise and then none of my programs would respond. I was able to temporarily fix it using disk utility. It then started again a few hours ago. I tried doing what I did before, but this time it didnt work. I have also been getting a flashing ? at start up. I tried all the steps listed here:
http://docs.info.apple.com/article.html?artnum=58042
and none of them worked.
When I booted from the Mac OSX disk, my Hard Drive wasnt mounted so I went through al the steps for resetting the PRAM and that didnt work either. I finally went to do Archive Install and now I have no Hard Drive!?
Please help me!!

Hi, Rachel. Welcome to Apple Discussions.
I would recommend investing in DiskWarrior to repair your hard drive. It can often find the drive when Apple's own Disk Utility cannot.
My advice would be to buy DiskWarrior, use it to repair your hard drive, and then do the Archive and Install.
Good luck.

SAINT Update DD Import finished

Dear All,
I have installed mySAP ecc5 on windows with oracle 9i and updated the latest kernel patch 247 with tp and r3trans.
Then I have configured TMS successfuly.
Now when I am updating the sp manager level sapkd019 with saint then spam t code it is stuck in
"DD IMPORT finished with return code 4 "
What may be the problem . Is there any more prerequisition before update the saint .
Pl. advice .

Hello,
It seems that the transport dispatcher RDDIMPDP can't trigger the next import step. Can you please attach the cooresponding SLOG in the /usr/sap/trans directory?
Regards,
Joseph

I can't open my phone when i just finish update to ios7.0.3

i can't open my phone when i just finish update to ios7.0.3
it's always show me "connect to iTunes"
I try to restore I phone to factory setting, then restore backup, but it's useless:
and I try to restore from iCloud Backup, but it was the same
I want to know about that, how can I open my phone and have all data back?
Cause the data for me is very important.
thank a lot.

Alright; first thing we need to confirm is do a full restore, and see if you get any kind of error message. During the set up assistant you then want to see if you have any backups in iTunes/iCloud by using this article to see where they are located
http://support.apple.com/kb/HT1766?viewlocale=en_US
For iTunes
To verify that the backup finished successfully, open iTunes Preferences and select the Devices tab. The name of the device will appear along with the date and time the backup was created.

When i import a movie file into iMovie,it somehow reverts to the shortened file of the same name that i previously had used

I'm trying to import a movie file into imovie that I know is 3hr16mins long but when it's finished importing,all I have in the programme is the heavily edited 51mins that i used in a previous project (using the same file),5 years ago. How can I stop iMovie from reverting back or could the much longer file be there and I have incorrect settings so I can't see it all?

Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
Patrick

HT1349 my i pad making noise when e mails sent and battery may need changing hod do I tell if it does?

mi I pad makes a horrible noise now when sending e mails and I think the battery needs changing.
How Do I know if it needs changing?

there is a battery bar in the top corner

When I import video, the video have ridges in the picture

When I import video from my Sony HDR CX-190 cam corder to the mac, I now have ridges, or small squiggly waves in the picture. Anyone experience this

Thanks Mike - I actually didn't realize that there's a connected USB cable tucked into the strap and connected to the camera. However, importing into iphoto doesn't help (for Mac users) as it still shows some "noise" in the picture (squiggly lines). If imported directly into iMovie, using the camera icon, left, on the bar in the middle of the page, does not present this problem and works fine. Not sure why iphoto doesn't work cleanly.

Beeping noise plays on imported iMovie footage

Hi
I'm a new Final Cut Express user - trying to learn...Can anyone tell me why there is a loud beeping noise when I play my imported iMovie in Final Cut? I have read on some of the discussion boards that it's necessary to remove the audio from the track before importing which I didn't do (not sure how but I'll give it a whirl!).
Thanks!
CC
iMac G5 Mac OS X (10.4.8)

Hi Cosmiccigar!
You might want to repost that question in the FCE forum:
http://discussions.apple.com/category.jspa?categoryID=123
as their experts might know the answer.

Odd whine noise, when short sounds stop suddenly

I have an issue which seems to mostly occur after a short sound file finishes - for example, an instant message chime, or being told I have new mail.
I get a high pitched whine out of the speakers, until I hit play on another sound file.
So I'll have new mail, notification sound, then high pitched whine. If I hit play on iTunes, the whine stops. I can then stop iTunes and sit without whine noise.
Sometimes if I close a browser window which was playing audio via YouTube or something, it does the same.
It's almost like it doesn't realise the sound has finished and is still trying to play it.
Anyone else get this, or is it just me?

Can't really reproduce it, no. It happens sporadically.
I don't know when it started - possibly quite early on. It only makes the noise when music stops.
Play something and stop it again, and it's fine.
It's almost as if it doesn't really it's finished and continues trying to play something but has nothing to play.
Odd.
Message was edited by: parkibald

[PS]Transparent edges when resizing/importing a vector

Hi,
when I import a vector object with perfect edges I am getting small 1px wide lines.
(before importing it hadn't those lines inside the graphics, also look at the left side)
After resizing it to a smaller size it getting much, much worse:
I used every interpolation mode and it looks bad.
How can I import the vector AI object and keep it clean?

You have antialiasing because your vector edges are not exactly on pixel boundaries.
And you would always get antialiasing unless you start with no antialiasing and resize with nearest neighbor interpolation (which is most likely going to look horrible).

Loud noise when printing

print quality good but loud noise when printing. do printers need "oiling"?

Hello @mikeed,
Welcome to the HP forums.
I understand that your 7500A is being rather noisy.
I would like to help.
Unfortunately, there is not way to 'grease up' the printers gears.
If the noise goes away when the product is on, and disconnected from the computer, there might be a connectivity problem. Use the following steps to isolate a connectivity issue with the computer.
Shut down the computer.
Turn off the product.
Disconnect the USB cable from the product.
Wait 30 seconds.
Turn on the product.
Print a self test report
Turn off the product.
Connect the product to a USB port on the computer.
Turn on the computer.
After the computer finishes booting up, turn on the product.
If you still hear the sound, connect the product to a different USB port on the computer. Check the functionality of the product.
If you still hear the sound, connect the product to a new computer.
Check the functionality of the product.
If the sound continues and the product functions normally, the sound is a normal sound.
When the product prints, the rollers, gears, paper feed, and carriage makes noise.
When you print in the Fast or Draft modes, the product makes more noise than when you print in the Best or Normal modes.
Check the following:
If the product did not print successfully, check for a paper jam.
Check that the product supports the paper you loaded.
Make sure the paper is loaded correctly, the trays are extended, and the paper guides are adjusted properly.
You can also try the following.
Remove and reinsert the cartridges to make sure that they are correctly installed in the unit.
Perform a hard reset.
While teh printer is powered on, unplug the printers power cord.
Wait at least 30 seconds.
Plug the power cord back into the printer.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HT204053 I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

Welcome to the Apple community.
So long as you are logged into the iTunes Store, using the correct ID and password (settings >store), then you will always have access to your apps, books, music, TV shows etc etc bought via the iTunes Store on that account.

I'm not really a computer guy.Just got a Kodak easy share camera. When I import the photos, they go to the area with my name in a file with the date. How can I move them to iphoto, or even better, import them directly to iphoto??

I'm not really a computer guy. I just got a Kodak"easy share" camera. When I import the photos they go to the section with my name in a folder. How do I get them from there to iphoto, or better yet, how can i import them directly to iphoto?? As stated, I'm not knowledgable,have an imac and need real rudimentary direction.

in the iPhoto preferences be sure the action when camera is connected is open iPhoto
What program are you using to import the photos?
If they are in a folder you can drag that folder onto the iPhoto icon in the dock to import - our launch iPhoto and under the file menu import from that folder
For real rudimentary directions try the iPhoto tutorials - and it would be a worthwhile investment of time to take the iphoto tutorials - http://www.apple.com/findouthow/photos/ - they are very helpful and will save you a lot of time and frustration. for the concepts - actual commands mya have shanged in some cases - and under the iPhoto help menu ==> iPhoto help - watch the videos there
LN

How do I include a drop shadow effect when I import an Illustrator vector into Edge Animate?

How do I include a drop shadow effect when I import an Illustrator vector into Edge Animate? It should be noted that I also have another effect (an extrude & bevel) applied which does copy over when I paste (or create an SVG and import) into Edge Animate. Any thoughts on why the drop shadow disappears but the extrude & bevel carries over?

Which version of Illustrator are you using?
In earlier versions of Illustrator it is not that easy to apply drop shadows with spot colours.
Another reason why it's always important to tell which version of AI … well …

Horrible noise when CD import finishes.

Similar Messages

Maybe you are looking for