Horrible quality video when shared via iMessage or texting iPhone

Between me and 6 of my friends who have the iPhone 6...we've found that it will take video very well but when sent via iMessage or text and is viewed on any of our iPhone 6's, the quality is so horrible you cannot figure what's happening but in messages. When looking at the video in the messages app on a Ma.. it's fine.

Believe it or not, the recommended size by most networks for an MMS message is still 300 kb. Because that's the case, the carrier server that the video message is sent to first will recompress the video to a size/quality that is closer to the size requirement, resulting in a drastically lower resolution message. I know, it *****, right?
Try uploading your videos to YouTube from your phone so that they get to your recipient in a much higher quality.

Similar Messages

What is the quality of pictures shared via photostream?

what is the quality of pictures shared via photostream?

On your Mac or PC, your photos are downloaded and stored in full resolution. On your iPhone, iPad, iPod touch, and Apple TV, your Photo Stream photos are delivered in a device-optimized resolution that speeds downloads and saves storage space. Which, of course, will vary depending on exactly what device.

Iphone 4 recieves my brothers iphone 3gs messages when sent via imessage

My iphone 4 recieves my brothers iphone 3gs messages when sent via imessage. When he texts me, his name comes through as my email address. I think this could be because we both have the same itunes account. not all messages my brother sends i recieve but i would just like this sorted out. please help!

Sounds like you signed up the same account for iMessages or the same phone number was added to iMessages.
Go into SETTINGS/MESSAGES/SEND & RECEIVE
That is the list of numbers and email addresses that the phones will receive iMessages for. Remove the duplicates that you might see between the two phones. Also make sure that the Apple ID at the top is not the same.
Fred

IPhone 6 Plus video quality is extremely poor when on Facetime and when sharing via text/message

I upgraded to the 6 plus from the 4S. Everyone that I facetime with and send videos to via text/message tells me how incredibly horrible the video quality is....especially in comparison to the way it was before I upgraded from the 4S to the 6Plus. These are people that I have always sent videos to and Facetimed with before, and they all say they can really tell a difference. So frustrating that my three year old iphone 4S is better than the new 6 plus 128gig that I just paid $500 for. We have little ones at home and this is one of the main things we use the phone for....to send vidoes and to Facetime with grandma and grandpa.
I'm on the same carrier (Verizon) that I have always been and have not changed anything. Is there a setting on the phone I can change that will help with this? I love the phone otherwise, but if it can't do this right, I'm going to return it and get my money back.
Can anyone help? Anyone experiencing this???
Thank you.

I have the same issue!! Why isn't there any answers to this problem? I became the laughing stock who owns a $1000 iPhone that can't share videos with family and friends. Please help!!!

Quality reduction when sharing with iDVD

Hi Everyone
I'm new to iMovie 11. This week I made my first short movie with a 720HD camera and I'm very pleased with the quality. When I watch it on my iMac it's great and when I share it with iTunes and watch it on my home TV, using AppleTV, the picture is great as well. However, when I share it using iDVD there is a fall off in video quality (with blocky text in title sequences) as I play the disc back through my DVD player and TV. I've tried playing the disc back through a friend's DVD player and TV, but things are no better.
Is this normal when sharing through iDVD or is there a setting I've overlooked?

Hi
As You see there are much to this - at least three levels as I get it
1. DVD-standard 480i
2. How it moves from iMovie to iDVD - Share to Media Browser and as Large
3. Choise of video editor as
iMovie'08 or 09 or 11 - are not tools of choise as they discard every second line resulting in 240i quality
I use
• iMovie up to HD6 or
• FinalCut any version
as they deliver 480i not losing anything.
Use High quality DVD - I use Verbatim DVD-R
Burn at slower speed - I use x4 - to get less burn errors
makes the DVD even better (plays on more Players)
Yours Bengt W

Video/Screen Sharing via 3G connection not possible - port restrictions?

I'm running Jabber-based iChat AV 5.0.3 sessions from my MBP connected to the Internet via a wireless USB modem 3G/UMTS (German Telekom D1 network). My buddies are connected to the Internet via regular broadband connections (DSL). I have set up a hosted Jabber server via Dreamhost (without SSL, port 5222 used).
Status Quo:
- Contact status of remote Jabber users shows up properly. All buttons (text chat, screen sharing, video) are available (not greyed out) on both sides.
- Text chat works fine.
- Video chat and screen sharing can be invoked from both sides (confirmation window shows up), but after confirmation the initiation process doesn't finish successfully. The video/screen sharing session doesn't run. *iChat AV shows a message indicating that it doesn't receive an answer from the remote user device.* If the iChat session is initiated from a buddy's computer, the buddy gets the same message respectively.
- For testing purposes, I changed the internet connection on my MBP from the mobile 3G USB modem to a regular *DSL broadband connection (same ISP, German Telekom). In this scenario, video/audio calls and screen sharing work flawlessly!* Therefore, I assume that the problems in 3G connection mode is caused by the ISP (German Telekom) blocking/restricting ports required by iChat AV for initiating the video call and streaming the data on their 3G network.
Is there any way to bypass ISP restrictions, by either changing specific iChat AV port settings on both ends (client devices) or by port forwarding? If yes, which settings should I change? Unfortunately, it's couldn't find any document indicating which ports are opened/allowed by German Telekom's 2G/3G (GSM/UMTS) network.
Below is an excerpt of the error message produced by iChat AV:
iChat Connection Log:
2010-11-09 21:18:19 +0100: AVChat started with ID 494414145.
2010-11-09 21:18:19 +0100: [email protected]: State change from AVChatNoState to AVChatStateWaiting.
2010-11-09 21:18:19 +0100: 0x1a8bf8b0: State change from AVChatNoState to AVChatStateInvited.
2010-11-09 21:18:28 +0100: 0x1a8bf8b0: State change from AVChatStateInvited to AVChatStateConnecting.
2010-11-09 21:18:28 +0100: [email protected]: State change from AVChatStateWaiting to AVChatStateConnecting.
2010-11-09 21:18:48 +0100: 0x1a8bf8b0: State change from AVChatStateConnecting to AVChatStateEnded.
2010-11-09 21:18:48 +0100: 0x1a8bf8b0: Error -8 (Did not receive a response from 0x1a8bf8b0.)
2010-11-09 21:18:48 +0100: [email protected]: State change from AVChatStateConnecting to AVChatStateEnded.
2010-11-09 21:18:48 +0100: [email protected]: Error -8 (Did not receive a response from 0x1a8bf8b0.)
Video Conference Error Report:
0.000000 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:1039 type=4 (FFFFFFFF/2)
[HTTP GET failed (0)]
0.000627 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:758 type=4 (FFFFFFFF/0)
[HTTP GET failed (0)]
0.346813 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:758 type=4 (FFFFFFFF/0)
[HTTP GET failed (0)]
1331.086051 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1333.086142 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1335.086270 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1337.086603 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1339.087985 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1341.088212 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1343.088361 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
929.446913 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2059 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
934.996640 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2074 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
935.002114 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2266 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
935.467624 @/SourceCache/VideoConference/VideoConference-415.22/SIP/Transport.c:2138 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK0fdd30e326aa779b
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=544473054
Call-ID: 9c7ecf46-ec3d-11df-8530-f81eeb5f4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.4
Content-Type: application/sdp
Content-Length: 708
Video Conference User Report:
928.427249 @:0 type=5 (00000000/16402)
[Local SIP port]
934.996832 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
*[Remote Router]*
*[PORT RESTRICTED]*
934.996842 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
936.003962 @:0 type=5 (00000000/60)
[Detected bandwidth (kbits/s): 2627 up, 2627 down. (00000000)
936.033015 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VideoConferenceMultiController.m:2423 type=5 (00000000/0)
[Start Conference With UserID: u0]
978.787787 @:0 type=5 (00000000/16402)
[Local SIP port]
1014.011790 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
[Remote Router]
[PORT RESTRICTED]
1014.011800 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
1015.024555 @:0 type=5 (00000000/60)
[Detected bandwidth (kbits/s): 2627 up, 2627 down. (00000000)
1015.031800 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VideoConferenceMultiController.m:2423 type=5 (00000000/0)
[Start Conference With UserID: u0]
1323.083386 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
[Remote Router]
[PORT RESTRICTED]
1323.083396 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
(…)

Hi,
Does this 3G device have any set up functions that are on your Mac ?
If it does not it is likely that it is wide open to all Port (65535 of them).
I presume that in System Preferences > Network you see a Public IP when using this device ?
Again this would tend to pint to all the ports being open.
Is there anything on the ISP's web site that suggests this device is unsuitable to be used with VoIP or SIP connections ?
VoIP (Voice over the Internet) uses the SIP connection process the way iChat does.
Most likely the issues is the way packets are sent.
When you do a download, for instance, do you find the speed increases in the first few minutes ?
When some data packets are sent over the Internet the next one is not sent until confirmation that the first has arrived.
This Latency effects Point to Point WiFi (antenna to Dish on House) and satellite connections mostly particularly when it is a two way thing.
It can effect Mobile/Cell phone type connections.
What sort of Speeds are you getting on the 3G device ?
http://www.speedtest.net/
Do these seem to get faster as the time proceeds ? (this can be difficult to spot).
The Log mentions one end being at just over 2Gbps although it does not make it clear which end.
As the Remote end is the end that reports "Router: Port Restricted" and it works over standard DSL we have to presume they have the ports open.
You could try restricting iChat 's Bandwidth in iChat menu > Preferences > Video Section to 500kbps (try it at both ends)
If that does not work try 200kbps
This may stop iChat from trying to send data too Fast for the Network Connections.
Realistically there are a few too many variables here.
It could be Speed of data throughout at the Initiation point. (Slow Start up of data transfer)
It could be an Internal setting preventing SIP.
It could be that the 3G network sends and receives data by different routes.
(I have seen this once when a ISP was repairing some Cabling. To maintain end user speeds they managed their own network to split Incoming and outgoing data to the end point.)
iChat does not like this as it checks the IPs and the Hops (number of intermediate stages/servers) and if the data is different it will not connect (Man in the Middle attack protection).
I can't remember the last time I knew of someone being successful with either an 3G USB dongle or a 3G phone as Modem (internet Sharing).
Despite my ideas I think you will be unlucky and this will not work.
10:31 PM Saturday; November 13, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

No video on home sharing via iPad 2 or iPhone 4 to new build for Apple TV.

Loaded update today. Now I don't get video when trying to stream content from outside sources such as HBO or PBS via my iPad 2. Used to work just fine. How can I go back to previous build?

Loaded update today. Now I don't get video when trying to stream content from outside sources such as HBO or PBS via my iPad 2. Used to work just fine. How can I go back to previous build?

Poor quality video when viewing on canvas - screens captured by Camtasia

I'm creating avi files of Excel screen shots and activities on a PC with Camtasia, moving them to FCP5, and converting them to QuickTime movies. I've tried lots of settings at both ends of the process. The clips look great if played on QT pl;ayer or other players and not bad when played in the FCP viewer. They lose a lot of resolution when I move them to the timeline, render them, and view on the canvas. Any idea what settings I should use to get these clips looking really good? Thanks very much.
Ernie Horan

They lose a lot of resolution...
they have to ...
iMovie is for video editing, delivery is in NTSC/PAL, so max. supported res is 720x480...
video means also: iMovie uses internally "dv" as videocodec (as on miniDV tapes...)… what codec is inside the .avi you're producing on your PC? .. as you probably know, avi (in the Apple world: mov) is just a container, some say "wrapper".. can contain many formats&codecs, which look good in playback, but lose quality when processed in iM.. as said: stay with dv...
if camtasia doesn't support dv, try a less compressing codec (mpeg4?)... try to come close to the video specs as possible...
last word about quality:
"video" means also, your Mac can only "emulate" the final pic quality, video has 30fps, is interlaced etc.... playout to tape/create dvd/use iM's live-playout feature to judge delivery quality....

Quality Loss when sharing

I have recently upgraded from Windows Movie Maker to Premiere Elements 8 and I have noticed a considerable loss in quality when I have burned my project. The source media is pretty poor, I use a Panasonic VDR-D160 mini DVD camcorder (yes it is a total nightmare getting importing the footage), and when I import the footage it is a .VOB file. The stats for the .VOB files I am working with are 704 x 576 picture that goes at 25 frames per second. The data rate is 9558kbps and the total bitrate is 9814kbps.
The first project I have done is very straight forward, with minimal editing and no effects. However, when I burn it to a DVD or a DVD folder it changes the frame to 720 x 576 and reduces both the data rate and bit rate to 7464kbps and 7656kbps respectively. This creates an obvious pixilation of the image - especially for parts of the video that are moving and it can be seen on lower resolution televisions. In sharing/publishing the video, how do I retain the same quality as the original? I have been through the help, and due to my lack of understanding of premiere elements I have not been able to figure out whether it is just a matter of changing one of the settings.
Thanks!

Unfortunately, you are starting with material that has already been compressed heavily to the MPEG-2 format/CODEC. Then you are editing and outputting to a Scaled up (the DVD-spec for PAL) and then re-compressed to MPEG-2. This is a triple whammie. Because PrE does not do "smart Rendering," what you see is what you will get.
A better choice for limited editing, basically just Trimming the material, would be a program that does "smart Rendering," where all material, that was not altered, except to remove portions of it, would NOT be Transcoded a second time to MPEG-2. I believe that some of the Sony Vegas products do this, but there are others. If you Google "smart rendering," you will see several programs, that feature this. I would choose from those.
You will still have the Scaling issue, unless you completely allow your smaller than spec. material to be surrounded by black. If you Scale in an editing program, even with smart Rendering, it will then need to be Transcoded to MPEG-2 all over again.
With that footage, the choices are very limited.
Good luck, and sorry for the bad news.
Hunt

Poor quality video when burning a DVD

Hi All,
I have recently purchased & installed Premiere Elements 11 on my Windows 7 64bit Dell laptop. I found the tutorials very helpful and was able to successfully create my first project - importing a 46 minute AVCHD file4GB m2.ts shot on my Panasonic HC-V100 in Record Mode HG1920: 1920x1080 25f/s Audio 48kHz. When creating the project I selected: New Project>Change Settings>PAL>AVCHD>Full HD 1080i 25 andTicked ‘Force Selected Project Setting on this Project’ (I'm in the UK hence selecting PAL)
I added titles then created a menu and scenes using a still photo 2mb jpg 3456x2304 300dpi for the menu background. So far so good - really pleased with the results on screen. Next I selected Publish>Disc > selected AVCHD Add Name>Choose 1920x1080i>Burn to Folder. I then burned the BDMV Folder to DVD using the inbuilt DVD burner in my laptop.
This successfully produced a DVD with menus and titles which will play on my Blu-ray player. The quality of the video is excellent and I am delighted with the result however here is the first of the problems I'm hoping someone can help with: The background image on the menu is slightly blurred as are the menu/scene titles.
Next I wanted to produce a DVD for people who don't have a Blu-ray player & therefore need to play it on a normal DVD player. This is the second problem (and one I have seen mentioned elsewhere on the community). I published the project in a similar manner to the one above but with the following differences:
Burn to DVD Folder: Select 4.7>Type name>Browse to location. I now burn the VIDEO_TS folder to DVD, again using the the inbuilt DVD burner in my laptop however this time the result is very poor. The menu doesn't work and the quality of the video is unacceptable. Of course I understand that the result will be considerably lower quality than with the AVCHD version however this is not watchable.
(BTW, prior to purchasing Premiere Elements 11 I had been playing the video from my camera into a Sony RDR-HXD910 hard disc recorder then burning DVDs from that device using SP mode. This produced DVDs with perfectly acceptable quality so I must admit that I was hoping for similar results from Premiere Elements.)
I have read on the community that DVDStyler is a preferred method of burning DVDs however afer downloading it I failed to find a way of using it for simply burning my existing VIDEO_TS folder.
This is as far as I have got and now would really appreciate some help to point me in the right direction to be able to burn my project onto ordinary DVDs. I have tried to put as much information on the post as possible but I am new to video editing so have probably missed or not described something!
Thanks in advance
Simon

ATR,
Thank you for helping me out.
To answer your questions:
--Do you really need NTSC DVD-VIDEO standard 4:3 on DVD disc or is NTSC DVD-VIDEO widescreen 16:9 on DVD acceptable?
I was told that product specs require 4:3 aspect ratio for DVD. (Unfortunately footage was all shot in 16:9 before I found out about the 4:3 finished requirement.) I want to generate the highest IQ possible in this format.
--Is your 1920 x 1080p 30 or 25 or something else?
All video was shot at 1920 x 1080p 60fps. AVCHD.
Video Source Properties as obtained from the Timeline:
Type: MPEG Movie
Image Size: 1920x1080
Frame Rate: 59.94
Source Audio Format: 48000Hz – compressed - Stero
Project Audio Format: 48000Hz – 32 bit floating point - Stereo
Pixel Aspect Ratio: 1.0
--What exactly is set as the Premiere Elements project preset for the project that has this 1920 x 1080p footage on its Timeline?
PROJECT SETTINGS
Editing Mode: AVCHD 1080p square pixel
Timebase: 59.94 fps
Frame Size: 1920x1080
Pixel Aspec Ratio: Square (1.0)
Fields: None (progressive scan)
Display Fomat: 60fps Drop-Frame Timecode
Title Safe Area: 20% horizontal, 20% vertical
Action Safe Area: 10% horizontal, 10% vertical
Audio Sample Rate: 48000Hz
Display Format: Audio Sample
--When the project preset was set, did you use NTSC or PAL section in the new project dialog?
I didn't make any choices. I didn't use the new project dialog. I imported media and started working. When I saved, I made no choices. Since I'm in the US and bought this from Amazon, I assumed it was NTSC, and that appears to be the case.
--Is your program version 12?
Yes.
Motivated by a different thread regarding titles and 4:3, I did create a test "movie" (not DVD) at 4:3 and all the titles fit within the image area. (I even made a point of inserting a couple of titles that ran outside the "safe" area in the PRE Titler; these also all fit on the image although they came closer to the edge. Not crowded, but perhaps not as aesthetically pleasing as those that were created within the limits.

Why do I get a loss of quality video when placing titels or grading in FCE. Even after rendering and saving to the final product? The video starts to get shaky

Whenever I place a title in my video in FCE, the part where I placed it losses its quality. Its getting shaky and blurred.
Even afther rendering and saving it to the final end product. The same problem occurs when I'm collor grading. I use the internal tools for titels and grading of FCE.

and some more specs;
My systsem >>
IMac 3.06 GHz Intel Core 2 Duo
8 GB 1067 MHz DDR3
clips and master on Imac
Scratchdisk on external disk with firewire 0.8
On both disks I have more tehn 0,5 TB geheugen left
Videocamera HF 100
Imported clips >>
- FXP 17 Mbps
For RT I use >>
- RT Unlimited
- Playback Video Quality high
- Playback framerate high
Videoclip =
- videorate 25 fps
- framesize 1920 x 1080
- compressor apple intermediate codec
- pixel aspect square

Acrobat hangs when sharing via email. Why?

I just installed the entire CC suite, including Acrobat 11 (or XI for you 1st century Romans out there). I was somewhat puzzled to see that when I select share by email the PDF still hangs with the spinning beach ball as it has for the two previous versions if not more. Is this a problem with Acrobat, MS Outlook or my particular set-up? It's hard to believe it would be with Acrobat because it has been a problem for at least the last three versions.
Thanks for any help,
Mike

So I'm the only person having this problem or am I the only person sending PDFs via email?

Photoshop Elements 12 Organizer Crashes When Sharing Via E-Mail

Each time I try to share images via e-mail form (embedded pictures), Elements crashes. There is no specific cause given so it is not possible to correct. Suggestions?

Hi,
Sorry, by loaded I meant running.
Thanks for the screenshot - very useful.
At stage 4, control is being handed over to outlook - since you have initialised outlook, I am assuming that you can normally send messages from it.
When you started the organizer, was Outlook 2013 running? The screenshot is showing an outlook task is running and I was wondering if it was the message waiting to be displayed. In Windows 8, I have seen the new message hiding behind the taskbar but haven't seen it in Windows 7 yet.
If outlook wasn't running when you started, then try hovering over the outlook icon in the taskbar, and when a little image appears, right click on it and select maximize.
If outlook was running when you started the organizer, look to see if there are now two outlook tasks showing in the taskbar (they maybe stacked). If there are two, hover over the icon and two small images should appear. Right click on the right hand one and select maximize.
Good luck
Brian

Contacts shared via iMessage not added after "create new"

Shan someone shares a contact with me thru iMessage, I try to add it to my contact list by tapping it in the conversation and selecting "create new contact". A small window appears with a preview of the new contact info. When I press "done" nothing happens. The window disappears, the contact is not in my contact list. iMessage search for that contact name does not return anything. IPad search does not return on the contact name either.
On/off, reset do not fix.

Hi!
An update
We tried the things mentioned in this SDN thread, but it is still the same error ( ESH_COCKPIT returns error - Connection GUID xxx has no connection data )
First we ran ESH_DELETE_DATA_FOR_LOGSYS and then we deleted the entries in the tables ESH_OM_LOGSYS and ESH_OM_LOGSYSA.
rollo

Poor quality video when uploading to Youtube

Hi there
I'm using Premiere Pro CS5.5 and I've exported a video clip along with a after effects project (using dynamic link)
The video quality is fine until I upload it to youtube.
I'm a newbie to Premiere Pro so any help would be much appreciated.
I've attached a zip file along with the project files
http://www.4shared.com/zip/Uu4cPZse/Premier_Pro_Project.html
any help would be much appreciated.
Mark

Mark,
Thanks for the link.
Let's step back just a bit please.
Can you give us the full details of your Sequence Settings, and your Source Footage?
You mention using ADL (Adobe Dynamic Link) between PrPro and AE. Can you give us a description of what that involves?
Last, can you give us the full details of your Export settings?
Thanks, and good luck,
Hunt

Horrible quality video when shared via iMessage or texting iPhone

Similar Messages

Maybe you are looking for