Host Compliance Report - Available Items Grayed out

Trying to run a host compliance report against discovered assets.
Under 'Available Items' --> "Operating Systems" --> "Solaris" --> "Solaris 10" I have a list if my discovered systems (I can see/manage them in 'Assets') but they are grayed out and I cannot select any of them to move to 'Target List" to run the report against.
Let me know what additional information is needed to help offer a solution.
Thanks in advance,
John

Hi,
If you aren't confident in using Terminal check out this site for help with Launch Services.
http://www.thexlab.com/faqs/resetlaunchservices.html
Carolyn

Similar Messages

  • "Reporting & Analysis" is grayed out

    I upgraded Shared Service and Workspace to 11.1.2.1.600 and Financial Reporting to 11.1.2.1.133. As per readme, when I try to reploy Financial Reporting Web Application using EPM Configuration Tool, "Reporting & Analysis" is grayed out.
    I edited raframework_1_config.xml in ORACLE_INSTANCE/config/foundation/11.1.2.0/product/raframework/11.1.2.0 .
    Changed the value from Configured to Pending
    <property name="shortcutFolderName">Oracle EPM System/Reporting and Analysis</property>
        <property name="state">Configured</property>
        <bean name="taskConfiguration">
          <property name="applicationServerDeployment">Configured</property>
          <property name="hubRegistration">Pending</property>
          <property name="HyperionFinancialReportingConfiguration">Configured</property>
          <property name="preConfiguration">Configured</property>
          <beanList name="preSelectedTasks">
            <listItem>
    Still its grayed out.

    Checked in 11.1.2.2 and it works fine there. Refresh is refreshing the image with data.
    Will check it in 11.1.2.3 (don't have access to it now)
    Regards
    Celvin
    http://www.orahyplabs.com

  • Items grayed out when they should not be

    I have some apps where files that should be available for opening are instead grayed out when they shouldn't be. They never used to be grayed out until recently, and they are a correct file type. (Open is set to "All files" not just the file extension, so it's not an oversight).
    Which part of the OS is responsible for choosing what items will be available in a file list (i.e. not grayed out)? I'd like to rebuild it since it seems to be corrupted. Also my LaunchServices seems to be messed up as well because some apps are not available for certain file types "Open With" when they ought to be. Terminal command? Disk Warrior? TinkerTool? Thanks.

    Hi,
    If you aren't confident in using Terminal check out this site for help with Launch Services.
    http://www.thexlab.com/faqs/resetlaunchservices.html
    Carolyn

  • ITunes menu items grayed out

    I've had this happen with previous versions of iTunes and now with the most recent version of iTunes (running OS 10.7.2) all the iTunes Menu items are all grayed out, as well as all the other iTunes menues, with less than a hand full of commands availabe. Since the Quit iTunes is one of the options grayed out I've had to force quit iTunes and even after a relaunch the menu items continue to be grayed out. In search the Apple Communities for this subject I found references to this problem going back to 2008 and no one has offered a solution. One of the suggestions was to run Disk Utility and repair permissions, which I have done and it didn't solve the problem, but I hadn't restarted iTunes which I again did by force quitting, and on relaunch all the options are back working as they should. Not sure if repairing the permissions had any effect on iTunes as none of iTunes permissions were repaired, just scanner and printer permissions.

    I have this same problem and it's very annoying.
    What happens is this: I'll be happily editing my library when, after an edit, it suddenly becomes impossible to select "Get Info" to edit tracks. The menu item is grayed out and Command-I just gives a warning beep.
    At this point, it is also impossible to Quit iTunes as that menu item is also grayed out and Command-Q also gives a warning beep.
    One thing I have found is that I can still quit iTunes by right-clicking on the dock icon, obviating the need for a force quit.
    Another symptom: the iTunes dock icon is constantly jumping up for things that it didn't used to jump for.
    I've tried deleting the preference file. I haven't tried moving the library and library.xml files and rebuilding them, mostly because I've got 380GB of music on an Airdisk and it would take an eternity to rebuild the library.
    I'm really fed up with this and have no idea what to do.
    For what it's worth, the behavior started on my old machine running Snow Leopard and has continued after a clean install (albeit with iTunes information copied over) on a new machine running Lion (now 10.7.3).

  • ICloud items grayed out on MBP

    Hi all-
    Last night I had to change my password for iCloud as it was entered incorrectly too many times (think I was typing it wrong). I've successfully done that and able to login both online as well as iTunes store, etc.
    However, today when I booted my MBP, I was first greeted with a bunch of keychain warnings. I was able to cancel out of all of those then enter the new iCloud password and those warnings are no longer popping up at boot.
    My problem now is that, when I got to both "iCloud" and "Internet Accounts" in system preferences, everything is grayed out (the items I should be able to check). At the top of both of those screens there's a "enter password" button, which I hit. I then enter my new password. It accepts it, in both, yet the screen it takes me to...with Photos, Mail, Contacts, Calendars..." etc are all still grayed. I cannot adjust, tick any of the radio buttons, etc. Also, under my user icon on the left both "Account Details" and "Set Up Family" are also grayed, unavailable to click.
    Can anyone help? There is an option to "sign out" which I'm tempted to do and try signing back in, but then, when looking into that option I've read that items in iCloud stored on the mac will be removed. I don't want to risk losing data from this mac. Or will it all just be brought back into the MBP from iCloud once I log back in? OS X Yosemite: If you sign out of iCloud
    Is there anything else I should be doing? Or is the play here to Sign Out and sign back in? Thanks.
    Cory

    Now I have another issue, potentially. When trying to sign out, I use my Apple ID to log into my computer. So now, before I can log out, it's telling me that I'll need to set up a new password and that I won't be able to use my Apple ID password to sign into this computer. This is quite annoying. If I do this step, re-log back into iCloud, will I then be able to revert back, setting my MBP login screen to my iCloud password? That's how I wanted it...it was seamless, allowing the same login online as I use when logging into this machine.

  • Why is "Apply to enclosed items" grayed out?

    There is an archived thread on this issue but with no resolution. When I want to change permissions on the contents of a folder, very often the "Apply to enclosed items" button (in the Get Info Permissions panel) is grayed out.
    Why? What's the fix? Is this a bug?
    QuickSilver dual-800 G4   Mac OS X (10.4.7)   X Server

    You'll only be able to apply permissions to children folders using the Finder's interface (via the Get Info or Inspector window) if you're the file's POSIX owner or if otherwise your Effective Permissions return this control (e.g. the ability to perform writesecurity and chown via an applicable ACL entry).
    But, generally speaking, the POSIX owner is delegated as the user who can change permissions for a filesystem object. Any administrator who is authorized root privileges (can "su to root") can change permissions for any filesystem object. Workgroup Manager provides a simple interface for doing this, but you may want to familiarize yourself with the chmod and chown commands for greater flexibility.
    If you're using Mac OS X 10.4, you may find my ACL Tips to be useful: http://discussions.apple.com/thread.jspa?threadID=318161&start=0&tstart=0
    --Gerrit

  • Product Menu items grayed out in Xcode

    I am a beginner in Xcode, I was working on a tutorial material with a basic calculator project and when I added an icon file to the project the Run or any of the Product Menu options got grayed out. Previous to this change everything was running and building fine. Can anybody advice on how to get the Run option to be available again? My guess is that I did something wrong at the time of adding the new icon file to the project but I cannot figure out what was it.
    I don't want to start all over.
    Thanks,
    Mario

    Mark:
    Thanks for the reply, I tried all options mentioned and nothing worked thou. What I decided to do is to use my timemachine backup and used the closest version to the last time the project ran properly, now I only have to re do just a portion of the project.

  • Menu items grayed out in Messages.

    Most menu items are grayed out in Messages: can't access preferences or account, among others. Just upgraded to Yosemite on Mid2010 Mac Pro.

    Okay, just by posting this request, I was finally directed to some more similar discussions that I couldn't find earlier. Buried within numerous, numerous suggestions to this issue, I finally found one I hadn't tried - booting briefly into Safe Mode, then restarting. For some utterly ridiculous reason, that appears to have solved the problem when nothing else would.
    So thanks, community, for finding the answer before I asked.

  • Photoshop CS3 10.0.1 - Launch hangs on Registration Screen, All menu items grayed out

    I'm using Adobe Photoshop CS3 10.0.1.
    When launching, the window labeled "Adobe Design Suite Premium CS3" opens - it's only filled with white, and no text or graphics (I think it's usually the window asking me if I want to register, which always comes up when I launch the program (rather annoying in itself).  However, now it seems that the launch gets "hung" on this window, as, even the the program starts, all the menus are grayed out, and I can't open any files or do anything.  Also, the window mentioned above only has the yellow "minimize" button available in the top left corner, so I can't close it or otherwise get rid of it.  Since even the Quit function is grayed out, I have to quit the program with a force quit.  Also, this same thing happens in my other CS3 programs (In Design) as well.
    I tried trashing the photoshop plist file (com.adobe.photoshop.plist) and also the com.adobe.118.registration file, which had no effect.
    Any advice on how I can fix this?
    Thanks!

    Hopefully this solution will work for you:
    http://forums.adobe.com/thread/1339100?tstart=30

  • "Only sync checked items" grayed out

    I've updated iTunes to the newest version and my 5th gen. iPod to v1.2. I'm trying to get the box on the iPod summary page to become "checkable"... it's the "only sync checked items" box, and it's grayed out... without it, the way I manage my podcasts becomes entirely screwed up. Anybody?

    I've got the same problem. Two days and no reply yet? What's especially troubling is that syncing only checked items had been my preference under iTunes 6. ITunes 7 should have kept all the same preferences.

  • Photoshop Elements 4 menu items grayed out after opening from iPhoto

    Hi,
    I just set PSE4 as my preferred photo editor in the General Preferences pane of iPhoto '08. When I edit a photo in iPhoto, PSE4 boots up (as expected and desired); however, all the menu items are inexplicably grayed out now in PSE4, so doing any editing is impossible unless keystrokes are used. Unfortunately, I don't know what all the keystrokes are for various functions, if keystrokes exist for each... Does anyone know anything about this? Gurus, please help! Advance thanks.

    Heheh: the inexplicable mysteries of the digital universe. Opening PSE4 up first, and then editing the photos in iPhoto so they appear in PSE4 worked! The menu items were no longer grayed out - all functional. Thanks Terence!

  • How to disable items (gray out) in DataGrid control?

    Hi,
    I need to implement a custom component to have a selectable list with a maximum selected items.
    that is, when the selected items reach the max number, all un-selected items will be gray out.
    Now I am able to use DataGrid control to display a selectable "checkbox" (through itemRenderer) at first column, to let user select the item.
    And the list name in second column.
    But I can't find a way to gray out (disable) those un-selected item when max is reached.
    Can anyone give any advise?
    Here is my code snippet:
    SelectableListView.mxml
    <mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" visible="true">
    <mx:DataGrid id="list_datagrid" dataProvider="{this.stringList}" showHeaders="false"
    editable="false" selectable="true" verticalGridLines="false" borderStyle="none" alternatingItemColors="[#F8F8F0, #FFFFFF]"
    left="5" rowCount="16" rowHeight="20" height="83" width="100%" top="0" doubleClickEnabled="true" doubleClick="onDoubleClick(event)" >
      <mx:columns>
        <mx:DataGridColumn id="listCheckBox_col" dataField="selected" editable = "false"
                                        itemRenderer="ListRenderer" width="18" headerText="" resizable="false" draggable="false"/>
        <mx:DataGridColumn id="listName_col" dataField="name" />
      </mx:columns>
    </mx:DataGrid>
    </mx:VBox>
    ListRenderer.mxml
    <mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="60" >
         <mx:Script>
              <![CDATA[
                   private function setInUse() : void
                        _data.selected = listInUse.selected;
              ]]>
         </mx:Script>
      <mx:CheckBox id="listInUse" width="18" height="18" click="setInUse()" selected="{_data.selected}"/>
    </mx:Canvas>

    what is listInUse insdie the itemRenderer? I am not very clear about how you use
    it. However there are 2 ways of doing it. Not sure if data.selected can be used
    to enable/disable the itemrenderer. So I will asume not. Have an extra bindable
    "enabled" property in your dataProvider model. So when you reach the maximum of
    selected items iterate through the collection and set the set the enabled
    accordingly. The renderer's enabled property is bound to the model's enabled so
    it should update accordingly. The other way is to bind the enabled of the
    renderer on the selected. But as I said I am not sure how your code works ...
    HTH,
    C

  • Additional download item grayed out

    I upgraded to the new version and tried downloading the additional content. At one point it complained that the download failed although it did seem to install sme of it.
    However, the menu item is now grayed out so I'm unable to try again. Is there anyway to reset this?

    dhjdhj wrote:
    I upgraded to the new version and tried downloading the additional content. At one point it complained that the download failed although it did seem to install sme of it.
    However, the menu item is now grayed out so I'm unable to try again. Is there anyway to reset this?
    Have you tried moving the MS preferences to the Desktop?
    Log in under a different User a/c?
    Trash the M/S app and start again?
    HTH
    CCT

  • Why are all menu items grayed out?

    I just opened iWeb 6 for the first time and all my menu items are grayed out except for a few things like Page Setup. Why is this happening? I looked in the Help and Getting Started but couldn't find anything that seemed to fit. I don't have an .mac account as I have web space on campus to use. Does that matter?
    Thanks.
    Anne

    If you are talking about iWeb '06 you need to got to the appropriate forum at....
    http://discussions.apple.com/forum.jspa?forumID=1108

  • All menu items grayed out

    Sometimes after rendering, and sometimes after exporting to QT, all the menu items are grayed out, including Quit, Save, etc. I can quit from the Dock and restart FCE 2.0.3, and everything is normal again. What's happening?

    I have not lost anything (yet), but it is annoying to have to quit to get everything back again.
    Thanks for the reference to the other posts, at least I'm not alone.
    Perhaps the OS X 10.3.4 update released today will fix it? We'll see...

Maybe you are looking for