Host controler usb connectivity

usbxhci.inf lost my usb conntctivity error 43 host conttoler windows 7 help

Please reinstall the drivers and check. In addition, please elaborate your problem.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

Is there a way to Host Control

OK I am on a mission to help a company figure out first, IF they can create an App that will allow an iDevice to controll their product via USB.
They've already done this with Android devices but those of us who own Apple products exclusively are left without the convenience of the app
and the on-the-go adjustability.
Their solution for the time being is to buy an inexpensive netbook for $40 that will allow yout to adjust settings just the same as with an android
device, but that's simply not practical. As well, that simply increases the cost being as you also have to buy the program box which is another $35.
That said, it would be much easier to be able to simply connect our iPhones, iPods or iPads to the device and change settings from there.
This is where this inquiry comes into play. The person I am working with told me thatthey need to be able to have Host Control capabilities
via the 30-pin and Lightning connectors of Apple iDevices in order for the App to allow the iDevice to communicate directly with the component.
Are there any existing products that already do this with iDevices, and if so, which ones?
Another thought I had was ustilizing the 3.5 port being as products such as Square function through that port but I don't know if iDevice input can be
sent through that port.
Any suggestions would be greatly appreciated.
Thank you!

First off you're way out of line with your line of asumption, questioning and the accusatory nature of your commentary, and you come off as pompous.
If you read the thread title you'd realize that what I'm inquiring about is fully explained before having to read much further. If you know what Host control is, you'd know it is the ability to control and make changes/adjustments to settings of a device via an iOS device. The issue is that this company already has existing products (thousands of units on hand) that do not have Bluetooth modules, nor a way to directly interface with a Bluetooth module and thus there is a specific necessity to connect to their controller unit to the iDevice via the Lightning connector which is the problem.
With Android, the connector is not proprietary and thus they are free to connect to Android devices without infringing on any patents. As you might well know by now, there are thousands of Lightning cables and Lightning "compatible" devices that were produced without following the proper avenues and thus are not supported by iDevices and that is what and why they have not been able to come up with a solution. And just to set you straight on one thing you're way off base in regards to Open Source. By nature, the purpose of creating something as Open Source is so that ANYONE an everyone with the proper knowledge can alter and make improvements and additions with relative ease. The big drawback ofcourse is that it's much easier to do something wrong and ruin tons of hard work that went into something derrived via open source.
iDevices can receive input via apps from devices they are directly connected to via the lightning cable, but not visa-versa. With the 30-pin connector there were a few products that allowed for this but with Lightning there are none that any of us know of as of yet.
The product in question is a high-end Electronic Speed Control for RC Racing and it requires being plugged into the Hotwire Unit in order to make profile settings for fine tuning of all parameters. All highly technical stuff that is easily controlled via Android and Windows OS and they are working on an OSX version but it's much more convenient to do it from a device we all carry on our person, in our pockets.
I hope this serves as enough explanaition for you or anyone else who is inclined to feel annoyed at my repeated requests.

Cannot delete photos from camera folder in PC by USB connection

After few times update of iOS, I cannot delete the photos in iPhone 5 from my laptop. I can do it before but not now.
I usually connection my iPhone 5 through USB cable to my laptop.
Just go to My Computer and open iPhone photo album, then select, copy, cut or delete. This is my way to manage my photos.
I have not using iTunes for long time since the iCloud launch.
Please help me on this issue.
Many thanks.

Not only was this design change an extremely bad idea, after updating my phone, it moved all the pics from my camera roll into a photos album that cannot be edited. I can no longer delete any of these pics from my phone or from the USB connection, except from the camera roll which was added back. Now what??
How am I supposed to get rid of all the pics I don't want? This idiotic change created a big mess for me that there appears to be no way out of...
GIVE US BACK CONTROL OF OUT PHONES, AND STOP SCREWING WITH OUR ABILITY TO DELETE PICS!!!
I AM EXTREMELY UNHAPPY WITH APPLE NOW!

Is there a way for the 5s to HOST CONTROL devices via Lightning or otherwise?

So I asked this question in the regular Apple forum because I am trying to help a company why is not very Apple savvy
figure out how to offer the same level of control they offer on Android devices with the iPhone 5, 5c and 5s. They realize
there are restrictions on the Lightning side but I was wondering if such functions can be controlled via the 3.5 jack being
as that is an output source for the iPhone.
I realize the EASIEST solution is for them to make their device BlueTooth capable and that would solve the issue right
then and there but they already have several thousand units boxed and ready to go so this would be a solution for all their
customers who own Apple devices and do not have the ability to control the device the way Android users can.
If anyone knows of ANY device that can be host controlled by any Lightning cabled device, please let me know so they
can look into it and get this going.
Thank you.

I can't answer the "host control" part of your question, but there are plenty of devices that can be controlled by an app running on the iPod. For example, the Square credit card reader connects to the headphone jack.
If the device vendor wants to use the Lightning port, they should join the MFi Program.
https://developer.apple.com/programs/mfi/

I have an iPhone 4 still running 6.1.3 software. A few days ago it stopped working through my car's USB connection. How can this be fixed?

I have an iPhone 4 still running 6.1.3 software. A few days ago it stopped working through my car's USB connection (I have a 2010 Honda Civic Hybrid). I can no longer control my music through my car's stereo system. I am unable to choose what song, album, playlist, etc. to be played and cannot skip songs. When I try to skip, it reverts back to the first song. When I choose what to be played directly on my phone, it can only be played for about 30 seconds through my car's stereo system before it stops and displays the message "Unsupported Version." How can this be fixed? (Also, I know it is my iPhone and not my car because someone I know has the same exact car as me from 2009 and it did the same thing on theirs.)
Any help would be greatly appreciated. This problem is extremely frustrating and the alternative of trying to change music directly on my phone while driving is a risk I am not willing to consider. Thanks!

Alright, sorry for not having browsed this page a bit more before stating my question. I have just found some other similar topics on this problem. Please don't reply this thread unless there actually is a solution to the problem, because at current time there is not.

Is it possible to plug in an external HDD to the USB connection on my Airport Express for backups?

Is it possible to plug in an external HDD to the USB connection on my Airport Express for backups? As a kind of cheapo Time Capsule?

Unfortunately no, because the USB port on the AirPort Express will only work with a printer and a Keyapan remote control. Hard drives are not supported.
You would need an AirPort Extreme for that type of functionality.

Error 36 and External Drive File Copy Problem & USB Connections

In attempting to copy a folder with some 200G+ of files from my iMAC, with OSX 10.6.7, to an external portable WD 1Tb HD, newly formatted to HFS+ (journaled), and connected to the iMAC via a USB cable to the USB port on the iMAC keyboard, I kept getting an error message that Finder could not complete the operation as some data couild not be read or written and transfered, and gave the "Error Code -36". After some searching ont he internet for this error code I came across a host forums discussiong the error code BUT all referred to it being the result of MAC OS hidden "dot-underscore" companioned files being created when the MAC OS X file system copies or moves files to a FAT16 or FAT32 volume. This was not the situaion in my case a both drives were OS X formatted HFS+. Eventually I came across a very vague reference to the error also occuring when the cable connection with the external HD was not solid. I reconnected my external HD and attempted the file transfer again - with the same result. Eventually I decided to plug the external HD into a USB pot on the back of the iMA itself, rather than the keyboard set. Sure enough the error issue disappeared - the transfer successfully completed.
So my question relates to the "usb connection" challenge with iMAC. the iMAC has only 4 USB ports on the back directly. I did have two desktop external HDs plugged into 2 of these USB ports at the back of the iMAC, as well as a WACOM pad device into the 3rd, and an EPSON 3880 printer into the 4th, and so was forced to employ the ports ont he keyboard for portable HD. So - what's the answer in a situation where the 4 are insufficient and it would appear that the keyboard ports seemed to be unpowered?? Any suggestions?

It's actually a Time Machine backup drive which is formatted in Mac OS Extended (Journaled). I wish I'd copied the exact error message.
I believe it was something to the effect of "Error 36: The file could not be copied because some of the date could be be read/written" or something along those lines. Next time it comes up I'll copy it. I have Drive Genius running with DrivePulse, but it doesn't ever seem to start.
My biggest concern is that this is a sign that the drive is failing. When backing up, it also slows, or stops midway through and just hangs there. Though I haven't done a lot of extensive testing on that because if the drive is failing, I don't want to speed that process up any more.
To add to the complication, there is a second external drive which Time Machine is also backing up for me. There is one particular file, the Virtual Machine file, I was trying to get off the other external drive and it produced the same problem. That's when I went into Time Machine to try and retrieve the file that way and it did the same thing. The other external drive is making some sounds, but it doesn't sound like a distinct clicking, more like a more pronounced version of the normal constipated hard-drive sound. The Time Machine drive, isn't making any obviously strange sounds at all.
So, I can't tell whether the drives are failing or if it could actually be that particular file itself causing some strange problems.

Anyone know why my Ipod Touch won't wi-fi sync with my win 7 PC unless it is usb connected to it?

According to latest Apple IOS release 5.1.1 I can wi-fi sync my IPod to ANY networked PC hosting its ITunes as long as the IPod is connected to a power source and its wi-fi is enabled. Well...doesn't work ("Sync Now" button is not enabled). It IS however enabled if I connect IPod to the windows 7 pc via usb cable. Of course, this option is then superflous as I am capable of syncing the device via the faster USB connection instead. Isn't it supposed to work if the ipod is connected to a power outlet, or my Macbook Pro and the Windows 7 PC and Itunes are running and on network? What's the point of the feature otherwise?
Reason I would ilke to do this is that my music library is housed on Windows 7 PC (it has more storage space then my MacBook Pro), but I often recharge it connected to my MacBook Pro This is a nice to have, but hardly necessary feature, but if someone has a solution I would love to know about it.
Possible error on my part:
I enabled this feature while IPod was not connected to any device. (later read that one should enable the feature while iPod connected to PC). The "sync now" button is not enabled UNLESS I connect the ipod to the Windows 7 pc by usb cable. THEN the "sync now" is enabled. What do i do to correct?

I synced iPod touch to a desktop wirelessly connected to a router.
Searched the forum and found 3 useful suggestions.
1. check the firewall log to ensure there was an exception allowing applemobiledevice.exe to clear the firewall, if it is blocked.
2. Verified the desktop was accessible via wi-fi.
3. Connected iPod to the desktop using the usb cable,
ran iTunes,
clicked the iPod device icon to open the Sync window,
clicked the SUMMARY tab and
scrolled down to the checkboxes. Checked the box for "wi-fi sync".
Then SYNCED the iPod via the cable.
Then disconnected the iPod from the cable without clicking the EJECT icon. This leaves an established sync connection on iTunes.
Quit iTunes, then reloaded it to ensure the iPod device icon still appears under DEVICEs in iTunes.
I wonder if you are having problems with the wireless transmitter? I've had them burn out in the past. Replaced a router that died, and had a dell laptop whose wi-fi xmit/receiver died.
Also had to re create the wireless network setup on the desktop. Not sure why but twice have had to recreate it when it quit working.
I sympathize. it's a pain in the butt dealng with networks.

Why doesn't the sd card or the usb connect to my mac ????

why doesn't the sd card or the usb connect to my mac plzzzz help meeeeeeeeeee

The reason no one has replied is that you posted in a little-viewed forum for an obsolete Apple software suite. I am asking the Hosts to move you to the MacBook Air forum.
Also these forums are NOT chat rooms so you will seldom get an instant answer. No one here works for Apple; we are end users like you who volunteer on a time-available basis to help our fellow Mac users. Patience is required here.

Problem with the USB-connection after upgrade to P...

Hello to everybody!
After upgrading PC-suite, I can't establish a USB-connection with the phone.
Here are the facts:
1) My phone is the E90. Latest software installed (300.34.84)
2) PC-Suite version 7.0.9.2 english. I also tried the greek version, same problem with it also.
3) Nokia Connectivity Cable Driver 7.0.2.1. I also installed manually a previous version of the driver (7.0.2.0), but this didn't solve the problem.
4) I didn't have any problem with the older version of PC-suite.
5) I don't have a problem with the cable because the data-transfer-mode works fine.
6) Prior to any installation attempt, I always first uninstalled PC-suite and Cable-driver manually with the windows-xp uninstall program. This was not the fact, only in my first attempt, where I upgraded the pc-suite from inside the program itself.
Please help, because I can't backup and this is very important for me!
Solved!
Go to Solution.

Thank you all for your suggestions but nothing of the above worked for me.
After of hours and hours of installing and uninstalling of several versions of the pc-suite I solved the problem as following:
1) Uninstall manually (windows - control panel - add/remove programs)Nokia-PC-Suite, Nokia Connectivity Cable Driver AND PC Connectivity Solution!
2) Restart PC
3) Download and install the new version of Nokia-PC-Suite.
The tricky part is that you have to uninstall the application called "PC Connectivity Solution" manually and since the title of the application dosn't include the Nokia-Name you have first to find out that this program is Nokia-related!
Once again, thanks to everybody who took the time to make suggestions and especially to cricfancy who made me aware of the fact that PC Connectivity Solution is a nokia application!
Finally, I would like to make a statement for Nokia:
People, if you are not sure about an update then keep it in beta and don't make it available to the public!!! I lost hours and hours on search and made countless installs and uninstalls to find out what was wrong. Under the line, I had made no mistakes in my update from the start and the whole problem was based on your software! This is not acceptable!

HP Pavilion P6-2220t. All security USB connections are shut off in BIOS. Need to turn on.

I was told that all of the Security USB connections was shut off in the BIOS. The only controls for this PC is USB ports for the mouse and keyboard control ect. How can I get into the bios without the keyboard and mouse in operation? There is no other way to control this model computer. The only connections on this PC is USB connections only. Again If I can, somehow get get into the BIOS I can turn the Security USB connections on as they should be.

Hi Big_Dave,Yes the ALL security USBs in the Bios are in fact shut off. I saw it done in front of me.The person was trying to install Windows 7 but the usbs in the bios stopped workingeach time he tried the install the software. He thought that shutting off the securityUSB in bios would stop the security only and allow windows to be installed. He thensaw that all the security USBs in bios had completely shut down the usb connectionscompletely. I didn't know that is what he actually done until he went through with meand told me everything that he had done step for step with me. Then it dawned onme that was in fact what I saw him do. Anyway the Security USBs are all shut off.Money is hard to come by here so it will remain disabled until someone can walk methrough getting it turned on somehow without working usb connections. I refurb.laptops but not PC desktops like this one. This is new to me also. I think I will stick torebuilding laptops after we figure out how to get into the back door or find a way tohelp[ him fix this problem if I can. Anyway thank you for your input into this problem.

Differences operating Canon Pro-10 Wirelessly vs USB connected

To test my new Canon Pro-10 I connected it via USB last night and printed with it. The Quick Menu was "complete" with all the bells and whistles showing in the "corner" box. When I printed it offered me many options for Quality and Media -- various types of paper including Canon paper and other papers. Now that I've successfully connected wirelessly, my paper options are limited to "photo paper" and "plain paper", and the corner box has only a couple icons in it and I get a message that a driver is missing for Quick Menu. I re-installed Quick Menu from the Canon website and I still get that message. Prints I got last night via USB connection were good -- a bit dark but good quality. I'd selected "other matte paper" because it was a third party brand. Today I used the same paper and printed one of the same images and it was smeary and totally unusable. I switched to Canon paper and printed the same image. It was much better but WAY too dark to use. I can probably edit the image to fix that but I shouldn't have to......
VERY unhappy with my Canon experience so far -- been using an Epson for 8 years, thought it was time for an upgrade and I wanted wireless due to space constraints around my desk. Should I not expect quality photo prints via wireless?
Solved!
Go to Solution.

I have three of these printers in this line. The 9000, 9500 II amd the Pro-100. Not a Pro-10, however.
They all printed differently but after a little tinkering with the settings, they all did very well. They are great printers.
First off you must not let the printer set anything. Turn off every bit off control it has. You can do this with the Canon My Printer under the Printer Settings tab. Do you know how? I will guess, yes, for now but if you don't get back to me.
Second, you need to have your photo editor handle all settings and color matching. You know how to do this?
And lastly, it is essential you get some settings on your monitor that somewhat matches what the printer is printing. Your printer may be doing exactly what you are telling it to do and you have no idea it is, because your monitor is off. If you don't do this step, you can forget the other steps. However, there are only a few things that you need to be concerned with. You don't need any fancy extra add-ons to do this. No additional sortware or gadgets, etc.
But you must get the grey-scale very close. You need to get the brightness very close and you need the contrast very close.
After you do these things you can make adjustments to your prints by just looking at your screen. Because you know the monitor and printer are on the same level. One more point, you can NOT get a printer to print every color exactly the way you saw it. It isn't possibile as all colors and adjustment effect all others. My goal is to get the skin tones right. That is what people notice most.
For instance, I know my newest Pro-100 tends to print darker than what I see on the monitor. So, I automatically know to set it's prints one stop brighter in Photoshop, in my case. It also prints with a slightly warn tone. Most of the time, with protraits especially, this if OK but sometimes it is not. In that case I adjust the "temp" setting slightly cooler in PS.
Make sure you have the correct ICC profiles and you are using Canon brand ink and paper untill you get good with the printer. Very, very important, otherwise you don't know if the printer is doing exactly what you are telling it to or not.
Also, use the USB connection until everything is right. You are just adding another issue when you try to set up the printing a nd the wireless all at the same time. Just like using Canon branded products until it is a go.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

IPhone 4.1 USB connection in vehicle?

I just downloaded 4.1 and every since then I have a USB direct connect in my GMC Sierra it always played the audio from the Iphone and since doing that it has not been able to read it, anyone else having the problem?

Seems to affect all direct USB connections. Have a 2010 Lexus RX350 w/ Mark Levinson stereo. Since updating 2G 64GB iPod Touch from 4.0.2 to 4.1, audio playback is clipping/crackling and muddled. I also have occasional synch problems where the iPod isn't recognized or I cannot FF songs via steering wheel controls.
Also noted by others here:
http://www.ilounge.com/index.php/news/comments/ios-4.1-causing-in-car-usb-playba ck-problems/
C'mon apple. Get it together and test better. Doesn't make much sense to affect core functionality with an update.

MIDI over direct USB connection between two computers?

I'm trying to find out if it's possible to send MIDI between two computers using a direct USB to USB connection (no MIDI interface). I have not seen this done before, I don't think, but I don't know why it shouldn't be possible.
Thanks for any tips on making this work. I want to connect several computers together to control sound and video for a theatre production, to be triggered from a single MIDI source.

Hi,
I don't think there's something for midi over USB; however, there is an experimental tool for midi over Ethernet. It's called iMidi, and it's written foor PPC, and there's no native Intel version. I tried it with my PPC eMac and Intel iMac, but it took a lot of processing power
See http://openmuse.org/transport/mip_oview.html for more info.
You could also use a midi thru box and 2 midi interfaces to trigger 2 Macs with 1 midi source.
Hope this helps!
Kind regards,
Jaap

Are there any JAVA APIs that control usb ?

i can't find any document JAVA APIs that control usb�C
help me !!

I think there is an API planned. But I think it is still in the specification state. Search the developer connection.

Host controler usb connectivity

Similar Messages

Maybe you are looking for