"Host Controller Not Found"

I recently factory reinstalled my Lenovo W510. The recovery discs come with Vista 32 and I upgraded the system to
Win7 64. The device manager did a good job at finding the missing drivers I needed except for two things...
The most concerning problem is that the pc will not recognize any usb device that is plugged into it. The logical
thing to do is download the required usb drivers to make them work. I have downloaded the usb 3.0 device
driver as well as the firmware for this. Whenever I try to run the "USB 3.0 Host Controller Utility" , the system tells
me that there is no host controller found. When I try to install the firmware it says "Not Found the Host Controller"
I don't know what else I need to do? The device manager update utility does not recognize any missing drivers.
Any help?
THANKs!!!!

hey atweiss90,
if you uninstalled the current USB 3.0 drivers. Does your OS install generic drivers for it ?
If it does, could you see if your USB works with the generic drivers.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

XPOWER USB 3.0 HOST controller not found

i tried to reinstall the usb 3.0 driver/app from msi and when i run it from the start menu i have this error below
i also tried asus driver and does the same thing.. i need help.. and i am thinking that the conflict on my device manager is the controller
Machine Spec :
Bigbang Xpower (1.40) bios
intel xeon x5650
Kingston hyper X 2250mhz
Msi GTX 295 single PCB
please help..

here is my story..
my old rig was xpower + gtx580 + same memory + xeon 5650 and works like a charm. i rma'ed my mobo last month and have the chance to assemble it yesterday, i sold my gtx580 and downgraded my card to gx295 and that is the only thing i changed.
right now, i do not know if the new rma'ed mobo has a problem or this gtx295 causing it. currently, here are the points to consider
-GTX 295 with a single memory it works
-GTX 295 with 2 or more memory i encounter a vga conflict
-GTS 460 works fine with a single dual and triple channel memory

WebUtil: oracle.forms.webutil.host.Host bean not found

Hi. This is my first attempt using WebUtil. The following code is in my When-New-Form-Instance trigger:
client_host('N:\TTMS\ITS\vbasic\compiled\MenuUpdate.exe');
This is the error I receive:
oracle.forms.webutil.host.Host bean not found
I've included my formsweb.cfg below for your reference. Note that the application is using the [ttmsmenu] configuration.
Thanks in advance for your help with this problem.
***FORMSWEB.CFG***
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
#WebUtilArchive=frmwebutil.jar,jacob.jar
#WebUtilLogging=off
#WebUtilLoggingDetail=normal
#WebUtilErrorMode=Alert
#WebUtilDispatchMonitorInterval=5
#WebUtilTrustInternal=true
#WebUtilMaxTransferSize=16384
# System parameter: default base HTML file
baseHTML=base.htm
# baseHTML=webutilbase.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# baseHTMLjinitiator=webutiljini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# baseHTMLjpi=webutiljpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
# HTMLbeforeForm=
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT>
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
#imageBase=DocumentBase
imageBase=codeBase
# Forms applet parameter default 750
# width=1000
# width=100%
width=500
# Forms applet parameter default 600
# height=700
# height=100%
height=500
# Forms applet parameter default false
separateFrame=true
# Forms applet parameter
# splashScreen=
splashScreen=no
#splashScreen=ttmslogo_new.gif
# Forms applet parameter
background=ttmslogo_new.gif
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=ttms_banner.gif
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=C:\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ttmsmenu]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
width=500
height=500
background=no
form=ttmsmenu.fmx

Dumb dumb dumb.
I was running this form out of Form Builder 10g. At some point I changed the Application Server URL (Edit => Preferences => Runtime menus) from:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?config=ttmsmenu
to:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?
So my customized configuration with all the WebUtil references was not being referenced and I was getting the error.
Dumb dumb dumb.

Webutil.host.HostBean not found WEBUTIL_HOST.execute will not work

Hi everyone:
I've got a form. I've attached webtill.pll and subclassed webutil.olb.
In the WHEN-NEW-FORM-INSTANCE trigger it does:
client_host('cmd /c cd > arch.txt');
When I execute my form I got the errror:
webutil.host.HostBean not found
WEBUTIL_HOST.execute will not work
Could anyone give me some help on it?
Thanks!
Carolina

Hi!
this is what I got in the Java console
JInitiator: Versión 1.3.1.22
Usar versión JRE 1.3.1.22-internal Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Documents and Settings\Administrador
Configuración del delegado: sin delegado
JAR cache enabled
Location: C:\Documents and Settings\Administrador\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://rx26201:7778/forms/java/frmall_jinit.jar from JAR cache
Loading http://rx26201:7778/forms/java/frmwebutil.jar from JAR cache
Loading http://rx26201:7778/forms/java/jacob.jar from JAR cache
Loading http://rx26201:7778/forms/java/dgrImages.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
La versión del applet Forms es: 10.1.2.0
thanks!

Host Configuration not found error in database control

I have freshly installed Oracle DB 11g and a starter database.
Then i went to emctl (database control), at the home tab, I noticed the status is up (Green up arrow icon) but the "Instance Name", "Version", "Up Until" entries have the value "unknown"
And then when i Click on the "view all properties link", I noticed that the ORACLE_HOME entry has a warning icon after the entry. Then when you click on the ORACLE_HOME entry link, I get a page saying
Host Configuration not found. Check to see if the target exists.Whats happening? Did I miss something in my installation?
regards,
Anton

What is the OS?. Have you seen the Metalink note: 353681.1
Subject: Problem: Click on ORACLE_HOME gets "Host Configuration not found. Check to see if the target exists"
Doc ID: 353681.1 Type: PROBLEM
Modified Date : 30-JUL-2007 Status: PUBLISHED

USB Host Controller not recognized by Windows 7.

Just installed Windows 7 in a1130n desktop. The USB Host Controller and the Std USB Host Controller are not recognized by the operating system. The USB ports and the media memory ports on the front panel will not work.

My HP Z400 is suffering from the same problem. Did you discover a solution?

Virtual Hosts 404 not found

Hi all ,
I have to set up a virtual host on CE7.2
I configure it on "SAP NetweaverAdministrator" --> "Java HTTP Provider Configuration"
virtual hosts name : share_folder
root directory : /share <-- all user and group can access (local directory)
aliases : test_share
after complete configuration.
I access this virtual host by
http://<server>:<port>/share_folder
or
http://<server>:<port>/test_share
all response "404 not found"
Can you give me suggestion.

did you define the alias name dispImageServlet in your web.xml
double click on web deployment descriptors in WSAD , and you will be able to add it very easily

I have this message on Terminal. nano/private/etc/hosts: command not found. How can I fix it to get right?

/etc/hosts ; exit;
/etc/hosts: line 7: 127.0.0.1: command not found
/etc/hosts: line 8: 255.255.255.255: command not found
/etc/hosts: line 9: ::1: command not found
logout

What are you attempting to do?

Everytime i try to e-mail an article to myself, or when i go on a site such as craigslist and try to answer an ad for a job i get "host-smtp not found" why is this?

whenever i attempt to e-mail an article i found online, or when i go to a site such as craigslist and look for employment, whenever i attempt to answer any ad for employment i get a pop up window that states : "the host smtp could not be found. server name correctly. subject start up nation 10 step page- yahoo small business; account: imap, server : smtp , protocol ; smtp, port 25 , secure (ssl) no socket error: 11001, error number : 0x800ccc0d"
i have installed microsoft office, with outlook, a new safety registry mechanic, and i still get this block. i cannot look for a job, or answer any job ad.

Have you tried logging out of your account via Settings > Store and tapping on your account id on the right-hand side, and the logging back in to see if that makes any difference ?
You could also try a reset and see if you can then download them after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
A third option is to download one of the updates to your computer's iTunes and connect your iPad to it and sync it across, and then see if you can download the other apps/updates directly on the iPad.

Network controller not found

sir i am unable to find the driver for network controller even from internet. please tell me what can i do ?

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP 15-ac042tu Notebook and issues with looking for a driver. Here is a link to your Driver page for your Product. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that might need updating. It also has a built in Wireless Assistant that should help.Please let me know how this goes. Thanks.

Standard Enhanced PCI to USB host Controller not working

Plz help me its suck i can't find any driver for this USB port its suck all my usb ports are not working they not accepting any usb or some thing or intel managment interface also not working plz help me . Thankyou
Us Device PCI
Device PCI\VEN_8086&DEV_1E26&SUBSYS_17F8103C&REV_04\3&11583659&0&E8 was configured.
Driver Name: usbport.inf
Class GUID: {36FC9E60-C465-11CF-8056-444553540000}
Driver Date: 06/21/2006
Driver Version: 6.2.9200.16384
Driver Provider: Microsoft
Driver Section: EHCI.Dev.NT
Driver Rank: 0xFF2005
Matching Device ID: PCI\CC_0C0320
Outranked Drivers:
Device Updated: false
Intel Mangagment interface
Device PCI
Device PCI\VEN_8086&DEV_1E3A&SUBSYS_17F8103C&REV_04\3&11583659&0&B0 was configured.
Driver Name: null
Class GUID: {00000000-0000-0000-0000-000000000000}
Driver Date:
Driver Version:
Driver Provider:
Driver Section:
Driver Rank: 0x0
Matching Device ID:
Outranked Drivers:
Device Updated: false

What is the installed operating system?
In which region of the world are you located?
Try the following Intel Management Engine software
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113870-1&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Video Controller not found, Code 28.

I've googled everything and all it throws back at me is to click 'Update driver'. I've done that and the automatic search can't find it.
I don't know what's causing this because it was fine yesterday!

Please upload a copy of your system information file. Click "start" , type "msinfo32" , Click "file" at the top of the page, select "export" and give the file a name and click "save" .
Navigate to where the file was saved to, and upload the generated text file to a public folder on your OneDrive account and post the link here.
If you don't know how to upload and share the files , please refer to the video tutorials in the links below.
Before watching the videos, there are a few things to remember about what is needed here, and how to accomplish the task.
1. Upload the files to a new folder on OneDrive.
How to upload files to OneDrive.
http://www.youtube.com/watch?v=QRdhqIYSGAU
2. Make the folder public.
3. Get a link. (see video below)
3a. Shorten the link if you want to.(optional)
4. Highlight the link, right click it and copy it.
5. Navigate back here and Paste (ctrl+v) it into the body of your post here.
How to share files on onedrive
http://www.youtube.com/watch?v=4lyme35HdQw

Network controller& USB controller driver not found and wifi not working

hello I Purchased HP 15-ac025TX (M9V00PA) Notebook laptop . i have installed all driver from HP site here is the link  http://support.hp.com/in-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326084#Z7_3054ICK0KGTE30AQO5O3KA30R1  but still netwok controller driver not found also wifi not working i installed blutooth drivers too . I am using window 7 sp1 (32 bit) For network controller device ID is PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 secondly univeral serial bus driver(usb) controller not found i installed all drivers from above link also update windows but still no solution hardware id of usb controller is PCI\VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03  and last i am unable to download AMD/Intel Switchable High-Definition (HD) Graphics Driver. the download link not working KINDLY RESOLVE THE ISSUE THANK YOU

Update: While the driver I knew would work has not shown up yet, I did some detective work and explored some other broadcom wireless card driver folders from some HP links, and I found one that should work for you. While it says it is for HP desktop PC's, they put the exact same wireless card form factor in a desktop PC that they do in a notebook PC. I see no reason why this driver would not work, since the setup information file contains the same hardware ID that you posted. Here is a partial copy and paste of the driver setup information file and you can see the hardware ID you posted is supported by this driver.  x86 - Win7
[BROADCOM.NTx86.6.1]
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D3103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2232103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D4103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_149257_1

Cisco IPS4255 won't boot (error=Searching / for images to boot. No images found in / Error 15: File not found unable to boot an image)

Hello,
I have a Cisco IPS4255 that will not boot an image. I'm seemingly successfully completing a TFTPDNLD each time, but it keeps rebooting with the cannot find image in \ error.
Here is a detailed snap shot:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
#1- I TFTP image to device which automatically starts the output below:
ENABLING IO-APIC IRQs
Setting 14 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 14 ... ok.
Setting 13 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 13 ... ok.
..TIMER: vector=0x31 pin1=2 pin2=0
testing the IO APIC.......................
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3000.1599 MHz.
..... host bus clock speed is 200.0105 MHz.
cpu: 0, clocks: 2000105, slice: 1000052
CPU0<T0:2000096,T1:1000032,D:12,S:1000052,C:2000105>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xff648, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 16
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B2,I1,P0) -> 18
PCI->APIC IRQ transform: (B3,I1,P0) -> 24
PCI->APIC IRQ transform: (B3,I2,P0) -> 24
PCI->APIC IRQ transform: (B3,I2,P1) -> 25
PCI->APIC IRQ transform: (B3,I3,P0) -> 26
PCI->APIC IRQ transform: (B3,I3,P1) -> 27
PCI->APIC IRQ transform: (B4,I2,P0) -> 16
PCI->APIC IRQ transform: (B4,I3,P0) -> 17
PCI: Cannot allocate resource region 0 of device 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
keyboard: controller not found
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SER
IAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 30720K size 1024 blocksize
loop: loaded (max 8 devices)
lpc: version 0.1 (Mar 4 2005)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: TOQHIBA THLCD512MBA, CFA DISK drive
hdb: QalDisi QDAF@-510, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
Partition check:
hda: hda1 hda2 hda3 hda4
hdb: hdb1 hdb2 hdb3 hdb4
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
i2c-core.o: i2c core module version 2.8.7 (20040611)
i2c-dev.o: i2c /dev entries driver module version 2.8.7 (20040611)
i2c-proc.o version 2.8.7 (20040611)
i2c-i801 version 2.8.7 (20040611)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 26522k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 136k freed
init started: EXT2-fs warning: checktime reached, running e2fsck is recommended
BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
init started: BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
Starting pid 10, console /dev/ttyS0: '/etc/init.d/rcS'
Recovery version 1.13
Started on Sun Mar 7 05:17:41 UTC 2010
Full system recovery
A
Please press Enter to activate this console.
tarting pid 86, console /dev/ttyS0: '/bin/sh'
BusyBox v1.00-rc1 (2005.03.04-09:39+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
#2- I’m not a unix/linux person so I don’t have the knowledge to fix the “hdx” errors above, so after reboot it goes to “rommon”
Booting system, please wait...
CISCO SYSTEMS
Embedded BIOS Version 1.0(10)0 03/25/05 22:42:05.25
Low Memory: 631 KB
High Memory: 3968 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
00 00 00   8086   2578 Host Bridge
00 01 00   8086   2579 PCI-to-PCI Bridge
00 03 00   8086   257B PCI-to-PCI Bridge
00 1C 00   8086   25AE PCI-to-PCI Bridge
00 1D 00   8086   25A9 Serial Bus         11
00 1D 01   8086   25AA Serial Bus         10
00 1D 04   8086   25AB System
00 1D 05   8086   25AC IRQ Controller
00 1D 07   8086   25AD Serial Bus         9
00 1E 00   8086   244E PCI-to-PCI Bridge
00 1F 00   8086   25A1 ISA Bridge
00 1F 02   8086   25A3 IDE Controller     11
00 1F 03   8086   25A4 Serial Bus         5
00 1F 05   8086   25A6 Audio              5
02 01 00   8086   1075 Ethernet           11
03 01 00   177D   0003 Encrypt/Decrypt    9
03 02 00   8086   1079 Ethernet           9
03 02 01   8086   1079 Ethernet           9
03 03 00   8086   1079 Ethernet           9
03 03 01   8086   1079 Ethernet           9
04 02 00   8086   1209 Ethernet           11
04 03 00   8086   1209 Ethernet           5
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(10)0) #0: Fri Mar 25 23:02:10 PST 2005
Platform IPS-4255-K9
Management0/0
Link is UP
MAC Address: 000f.f775.7e24
Use ? for help.
rommon #0>
#3- If the TFTP is rerun the entire cycle starts again.

The IPS 4255 sensor appliance has only a single 512 MB internal CompactFlash module for storage by-default, so this part of the output you posted is interesting:
hda: TOQHIBA THLCD512MBA, CFA DISK drive
hdb: QalDisi QDAF@-510, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
As it appears that two (2) 256 MB ("248 MB") storage devices are being detected (despite the model of the first even containing "512MB" in its name).
I'd recommend double-checking that there is nothing installed in the "External compact flash device" slot located on the back of the appliance. See here for reference: http://www.cisco.com/en/US/docs/security/ips/7.0/installation/guide/hw_installing_4240_4255.html#wp2726
If there is a CompactFlash module installed there, eject and remove it, then power-cycle the appliance and attempt the re-image ("recovery") process once more. If the boot output still contains the same errors for hda and hdb, then it is probably a failing/failed CompactFlash module, so an RMA will likely be necessary to resolve.

WebUtil Error Bean Not Found

Dear All,
i am facing a problem of running webutil functions. I have compiled my webutil.pll and then attach to my form and then i copy the webtuil.olb objects into my
form and i created one button on my form to show the calculator the code is as follows
Note: i have webutil.cfg in my classpath of default.env file and i signed both webtuil.jar and jacob.jar successfully but still i am facing error.
e.g;
when-button-press
webutil_host.host('calc.exe');
error: oracle.forms.webutil.host HOST bean not found.
WEBUTIL_HOST.execute will not work.
Thanks.
Immediate help will be appreciated....

Hi,
Have you entered the webutil values in the formsweb.cfg file?
e.g. WebUtilConfig=<somewhere>\WebUtil\server\webutil.cfg
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilErrorMode=Alert
WebUtilConfig=<somewhere>\WebUtil\server\webutil.cfg
baseHTMLjinitiator=<somewhere>\WebUtil\server\webutiljini.htm
baseHTMLjpi=<somewhere>\WebUtil\server\webutiljpi.htm
baseHTML=<somewhere>\WebUtil\server\webutilbase.htm
Hopefully this may help you.
L :-)

"Host Controller Not Found"

Similar Messages

Maybe you are looking for