Host down 450 'the sequel'
Dear Forum people,
Again I come for help.
After working for months, the 450 host down error has returned.
I have down nothing to trigger it, and this is honest, i was not even in the office.
So I have done some digging and I am reading 2 things : DNS and route.cfg
First I will descripe my setup
Groupwise 8 on OES 11
The box is NATted, so internal adress 192.168.1.7
Router is 192.168.1.1
External dns : user.ispname.com
External smtp : mail.ispname.com
Solution 1 DNS
I have placed the DNS server adresses of my ISP in both the router as the Groupwise box
This seems to work ok. I can telnet to mail.ispname.com on port 25
Solution 2 route.cfg
I have created the file and placed in it my external ip and ip of server
user.ispname.com [192.168.1.7]
( is the ip adress supposed to be in brackets ? )
Still I keep the 450 Host down error and mail will not send.
Any ideas ?
On 04.10.2012 11:06, stelgenkamp wrote:
>
> Thank you Hubert and Michael,
>
> Deleted the route.cfg file and changed the relayhost form dns name to
> ip adress.
> Now the 450 host down error is gone.
> However although gwia reports mail is being send, it is not arriving !
> Also in the client message remains as undeliverable.
> Below snipped of the gwia log :
> 10:41:23 656 MSG 87556 File:
> /media/nss/MAIL/groupwise/gwdom/wpgate/gwia/wpcsout/gwi696f/4/506d67d2.000
> Message Id: (506D4BAB.B5F:211:4668) Size: 0
> 10:41:23 656 MSG 87556 Sender: [email protected] (changed )-
> 10:41:23 656 MSG 87556 Converting message to MIME:
> /media/nss/MAIL/groupwise/gwdom/wpgate/gwia/send/x06d67d3.355
> 10:41:23 656 MSG 87556 Recipient: [email protected] ( changed )-
> 10:41:23 656 Switching link state to SENDING_ALLOWED.
>
> 10:41:23 656 MSG 87556 Queuing message to daemon:
> /media/nss/MAIL/groupwise/gwdom/wpgate/gwia/send/s06d67d3.355
> 10:41:23 192 DMN: MSG 87556 Sending file:
> /media/nss/MAIL/groupwise/gwdom/wpgate/gwia/send/p06d67d3.355
> 10:41:23 192 DMN: MSG 87556 Attempting to connect to 213.75.63.13
> 10:41:23 192 DMN: MSG 87556 Connected to [213.75.63.13] (213.75.63.13)
> 10:41:23 192 DMN: MSG 87556 Transferred
> 10:41:23 192 DMN: MSG 87556 SMTP session ended: [213.75.63.13]
> (213.75.63.13)
> 10:41:23 800 MTP: File sent: 506d67d3.001 Size: 640
>
> So it connects and reports as send, but where goes my mail ?
Not under your control. Ask 213.75.63.13 (or better, it's admin). ;)
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de
Similar Messages
-
Windows 2008r2 and 450 Host down
We are running GW 8.0.2 on a Windows 2008r22 cluster. The server sits in the DMZ. A rule here as that no servers in the DMZ are allowed to be part of the main Windows domain of the company. Since clustering requires a domain controller we had to install our GWIA into its own Windows domain. My question is how will the following tid affect the server if we change the primay suffix of this computer as recommended by the tid.
"450 Host Down" errors GWIA on Windows 2008
This document (7005218) is provided subject to the disclaimer at the end of this document.
Environment
Microsoft Windows Server 2008
Novell GroupWise 8
Novell GroupWise 8 Internet Agent
Situation
When sending an outbound email with GWIA running on Windows 2008 Server, GWIA does not resolve DNS correctly and immediately shows a "450 Host Down" error (for the domain name of the recipient) when trying to send the message.
In Diag log mode, GWIA also shows a "No MX records found" error for each outbound message.
Resolution
Right-click My Computer
Go To Properties
Click on Change settings > Change
Go to the More tab then put the email domain name (such as "novell.com") in the "Primary DNS suffix of this computer" box.
Document
Document ID:7005218
Creation Date:01-25-2010
Modified Date:01-25-2011
Novell Product:GroupWise
Disclaimer
The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.
Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.[email protected]: wrote:
> My question is how will the following tid affect the server if we change the
> primay suffix of this computer as recommended by the tid.
Other than making it work? It won't have any adverse affect at all - just put
your normal company's internet domain in there.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
http://www.caledonia.net/gwmove.html -
Mail comes in, but won't hardly go out. 450 host down
09:16:13 2A9 Queuing deferred message: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\send\sf0272f3.391
09:16:13 2A9 MSG 2249149 Analyzing result file: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\result\rf026b6b.349
09:16:13 2A9 MSG 2249149 Detected error on SMTP command
09:16:13 2A9 MSG 2249149 Command: owensville.k12.mo.us
09:16:13 2A9 MSG 2249149 Response: 450 Host down (owensville.k12.mo.us)
09:16:13 2A9 Building undeliverable message
09:16:13 2A9 MSG 2249150 Analyzing result file: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\result\rf026b89.350
09:16:13 2A9 MSG 2249150 Detected error on SMTP command
09:16:13 2A9 MSG 2249150 Command: owensville.k12.mo.us
09:16:13 2A9 MSG 2249150 Response: 450 Host down (owensville.k12.mo.us)
09:16:13 2A9 Building undeliverable message
09:16:13 2A9 MSG 2249700 Analyzing result file: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\result\rf02b635.858
09:16:13 2A9 MSG 2249700 Detected error on SMTP command
09:16:13 2A9 MSG 2249700 Command: owensville.k12.mo.us
09:16:13 2A9 MSG 2249700 Response: 450 Host down (owensville.k12.mo.us)
09:16:13 2A9 MSG 2249700 Deferring message: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\defer\sf02b635.858
09:16:13 2A9 MSG 2249701 Analyzing result file: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\result\rf02b653.859
09:16:13 2A9 MSG 2249701 Detected error on SMTP command
09:16:13 2A9 MSG 2249701 Command: owensville.k12.mo.us
09:16:13 2A9 MSG 2249701 Response: 450 Host down (owensville.k12.mo.us)
09:16:13 2A9 MSG 2249701 Deferring message: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\defer\sf02b653.859
09:16:13 2A9 MSG 2249702 Analyzing result file: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\result\rf02b653.860
09:16:13 2A9 MSG 2249702 Detected error on SMTP command
09:16:13 2A9 MSG 2249702 Command: owensville.k12.mo.us
09:16:13 2A9 MSG 2249702 Response: 450 Host down (owensville.k12.mo.us)
09:16:13 2A9 MSG 2249702 Deferring message: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\defer\sf02b653.860
09:16:13 2A9 MSG 2249872 Analyzing result file: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\result\rf02c302.023
09:16:13 2A9 MSG 2249872 Detected error on SMTP command
09:16:13 2A9 MSG 2249872 Command: owensville.k12.mo.us
09:16:13 2A9 MSG 2249872 Response: 450 Host down (owensville.k12.mo.us)
09:16:13 2A9 MSG 2249872 Deferring message: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\defer\sf02c302.023
09:16:13 2A9 MSG 2249873 Analyzing result file: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\result\rf02c302.024
09:16:13 2A9 MSG 2249873 Detected error on SMTP command
09:16:13 2A9 MSG 2249873 Command: owensville.k12.mo.us
09:16:13 2A9 MSG 2249873 Response: 450 Host down (owensville.k12.mo.us)
09:16:13 2A9 MSG 2249873 Deferring message: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\defer\sf02c302.024
09:16:13 566 MSG 2249982 Processing inbound message: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\receive\C47C20F4.452
09:16:13 566 MSG 2249982 Sender: bounce-4668227_HTML-223027605-297798...ail.cappex.com
09:16:13 566 MSG 2249982 Recipient: [email protected]
09:16:13 566 Recipient is undeliverable
09:16:13 566 MSG 2249982 Converting message to SMTP: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\send\xf02c75d.129
09:16:13 566 MSG 2249982 Queuing message to daemon: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\send\sf02c75d.129
09:16:13 566 Recipient: [email protected]
09:16:13 2A9 Queuing deferred message: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\send\sf02bb80.962
We keep getting 450 host down for owensville.k12.mo.us, which is our domain. Every now and then an email will be sent out, but it doesn't go through until 3-4 hours after it was initially sent. It has worked fine for years. The only thing that was recently done was that all users were removed except for two or three that still needed to send encrypted emails out to banks. I'm assuming that these issues started when that was done. I've recently been handed the responsibility of fixing this even though I have almost zero Groupwise administration experience.
Other than I know our mail servers DNS name is mail.owensville.k12.mo.us I really don't know much else. Where do I begin looking?Well the emails never made it out. Here's what the GWIA log shows for the outbound email I sent. It's not even connecting to the IP for the external domain and ends up sending back to itself. DNS seems to be fine as I can resolve all MX and A records that came up on mxtoolbox for google mail and hotmail from the Groupwise server. The 192.168.0.47 ip is the ip for the NIC on the Groupwise server. All of the Groupwise features are hosted on this one box.
07:33:30 3A6 DMN: MSG 2264946 Accepted connection: [192.168.0.47] ()
07:33:30 3A6 DMN: MSG 2264946 Receiving file: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\receive\a42550f4.817
07:33:30 3A6 DMN: MSG 2264946 SMTP session ended: [192.168.0.47] ()
07:33:45 3A4 MSG 2264946 Processing inbound message: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\receive\A42550F4.817
07:33:45 3A4 MSG 2264946 Sender: [email protected]
07:33:45 3A4 MSG 2264946 Recipient: [email protected]
07:33:45 3A4 MSG 2264946 Converting message to SMTP: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\send\xf055259.099
07:33:45 3A4 MSG 2264946 Queuing message to daemon: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\send\sf055259.099
07:35:48 363 DMN: MSG 2264946 Sending file: GMAIL_S/SYS:\GDOMAIN\WPGATE\GWIA\send\pf055259.099
07:35:48 363 DMN: MSG 2264946 Attempting to connect to 192.168.0.47
07:35:48 363 DMN: MSG 2264946 Connected to [192.168.0.47] (192.168.0.47)
07:35:48 363 DMN: MSG 2264946 Transferred
07:35:48 363 DMN: MSG 2264946 SMTP session ended: [192.168.0.47] (192.168.0.47) -
I have successfully migrated GW8 (domain, po, gwia, webaccess) from a NW65 box to SLES10sp2 VM running on XenServer 6.2. All users can access their mailboxes thru GW clients on the PC workstations or WebAccess. The system can also receive mail from the Internet... but is unable to send mail.
DNS on the network is running properly and I can nslookup with the DNS within the network from the VM running GW8.
I am checking the GWIA object using ConsoleOne on the VM, but the GroupWise tab is missing from the Properties screen. I've checked TIDs but doesn't seem to help the problem.
Any clue? Below is the error alert in my mail box when I was testing outbound mail.
================================
The message that you sent has been delayed.
The reason given for the delay:
450 Host down (gmail.com)
Information about your message:
Subject: Test mail @ 1213
GroupWise Message Id: 53CC9359.A8F:154:26027
Message log tag: 523851
Number of send attempts: 6
Time of initial send attempt: 07-21-14 12:13:20
Time of last send attempt: 07-21-14 16:41:48* glio wrote, On 07/21/2014 11:46 AM:
> I've disabled pop3 using the gwia object via ConsoleOne, but I
> can still retrieve mail from my mobile with pop3.
Check the gwia.cfg. A setting there will override your C1 settings.
Uwe
Novell Knowledge Associate
Please don't send me support related e-mail unless I ask you to do so. -
450 host down to only one domain
GW7.0.4 on SLES10 patch level 3--email to one domain
(nationwideplanning.com) results in a 450 host down result. No complaints
with any other recipients. An nslookup from the GW server results below, so
there is an answer. As a workaround, users are sending this recipient email
from their personal Gmail, AOL and AT&T accounts without fail. I am not
sure where to look for a cause of this failure and appreciate any thoughts
or clues. I have a ticket open with Verizon our ISP and verified out
reverse pointer record is OK, but they have not been very helpful.
Thanks.
# nslookup
> set type=mx
> nationwideplanning.com
Server: 198.6.1.142
Address: 198.6.1.142#53
Non-authoritative answer:
nationwideplanning.com mail exchanger = 0 mail.nationwideplanning.com.
nationwideplanning.com mail exchanger = 10 mail2.nationwideplanning.com.
Authoritative answers can be found from:
mail2.nationwideplanning.com internet address = 173.220.139.156
mail.nationwideplanning.com internet address = 96.57.118.76forgot to add GWIA log entry:
13:22:18 104 MSG 319619 Analyzing result file:
/media/nss/VOL3/cmgw/cmgwdom/wpgate/gwia/result/rd2b06fc.447
13:22:18 104 MSG 319619 Detected error on SMTP command
13:22:18 104 MSG 319619 Command: nationwideplanning.com
also, the A record in the GWIA config is just our domain name, but our
pointer record is listed a mailhost.<domain name>. Could this cause a
problem for few and random recipients? -
GWIA running on SLES - 450 Host Down sending
Hi All,
We are running GWIA on our SLES10 server.
On inspecting logs we see that almost every email sent to external email address the GWIA reports the following, 450 Host Down:
09:08:44 144 MSG 632 Detected error on SMTP command
09:08:44 144 MSG 632 Command: medartis.com
09:08:44 144 MSG 632 Response: 450 Host down (medartis.com)
09:08:47 640 Accepted IMAP4 connection with: ::ffff:192.168.0.17
09:08:48 640 Accepted IMAP4 connection with: ::ffff:192.168.0.17
09:08:49 640 IMAP4 session ended: ::ffff:192.168.0.17
09:08:49 872 IMAP4 session ended: ::ffff:192.168.0.17
09:09:14 144 Queuing deferred message: /opt/novell/groupwise/internet/wpgate/gwia/send/sd9c2837.056
Now on every ocassion the emails eventually get delivered.
Now to rule out DNS or port 25 issues I PuTTY to pur GWIA SLES server, telnet to an external mailserver that is reported as Host Down and it connects and responds immediately.
How do I troubleshoot and rectify this as I am at a loss to what else to check what is the cause?
Thanks,
DavidBob,
IPv6 disabled, restarted SLES, started GWIA and same issue. So not IPv6 unfortuantley.
Already Verbose but I will turn on debugging mode and capture what I see and post.
If I go teh Wireshark direction might need some help capturing exactly what is required.
Thanks,
David
Originally Posted by Bob-O-Rama
First off, disable IPv6 ( on the server, and then you may need to reboot ) if you are not actually using IPv6. That's what the goofy ::ffff:x.x.x.x stuff is. That may be your problem in its entirety.
You can enable the verbose or diagnostic logging on the GWIA. This will show you vastly more detail. You can set this via NCO or via the GWIA's HTTP console.
Also this is SLES... so you can get wireshark and get packet captures from the server and see exactly what is happening from the GWIA via telnet to the external SMTP server.
But I'm betting its IPv6.
-- Bob -
GWIA transfering mail to an outside mail server : mail.outside.com
Logs show 450 Host down.
I can ping mail.outside.com, and read a lot of posts.
I have tried :
Different DNS server, does not work and should not be neccessary as I can ping outside host.
Shutting down the firewall completely ; does not work
No virus software installed yet.
I have checked, but I have no route.cfg file ( never had )
I also read something about "reverse dns" but do not know what to do with that in GWIA setup.
Any ideas ?
StephanRight ; more info, sorry for this.
OES11 server, with groupwise.
Problem started after installing webaccess on the same server.
This messed up all things, imanager is unreachable and above error in groupwise gwia.
Webaccess could be reached, and was working.
So I started to delete the webaccess stuff manually, to try and get things working again.
Tried deleting the gwia and reinstalling.
But it seems webaccess messed up something with the routing as well.
So :
Traceroute is not working, imanager is not working.
Oh and this might me a lead :
In gwia, "Hostname A Dns record" I can change to dnsname.isp.com
But in the webconsole it changes everytime to servername.dnsname.isp.com
Could webaccess have messed up something to cause this ?
And how can I try to fix this ? -
Hi,
A quick overview...
NW 6.5 SP7, GW 7.0.2 server from our Indian office has been physically
shipped back to our UK head office.
I need to bring this server back online asap...
I've done all the necessary config on our CISCO firewall, and I've changed
the DNS settings on the Netware box to look at the UK ISP DNS servers. It
can ping and resolve a hostname, so DNS must be fine?
We relay via Messagelabs, but GWIA reports 450 HOST DOWN on all outbound
email.
I tried removing the relay, so we try sending direct, and get 450 HOST DOWN.
I downloaded TEL.NLM and try "load tel MESSAGELABS_HOSTNAME 25" and get
malformed address? Yet if I try with the IP addess - "load tel IP_ADDRESS
25" - it works.
I guess it's a DNS issue but why, if PING works and resolves addresses???
Really appreciate your responses, I'm under pressure to get back online
asap...
Regards
AlanFAO Anybody who comes across this post...
I spent a long time trying to resolve this, DNS was working as PINGs to
hostnames were being resolved to IP's and vice versa.
I ran out of ideas, so rebooted the server... And this worked.
Annoying, as I assumed INETCFG changes after "reinitialise system" worked,
and PING was clearly using the new changes? Well, I don't know what exactly
took effect after the reboot, but it worked. Shame I never tried this after
the first 10 minutes - DOH!
Cheers,
Alan -
450 Host Down message/between domains
Using Groupwise 6.5 and Novell 6, we can not successfully send email to a
specific domain OUTSIDE of our company. We get the following messages in
the GWIA log:
Detected error on SMTP command
Command : (the intended recipient)
Response: 450 Host Down (the intended recipient)
Deferring message
The recipient's ISP claims to have never received any message. We can
successfully email this recipient using a different email client.
Any ideas?
Fred Jeffers[email protected] wrote:
> Using Groupwise 6.5 and Novell 6, we can not successfully send email to a
> specific domain OUTSIDE of our company. We get the following messages in
> the GWIA log:
>
> Detected error on SMTP command
> Command : (the intended recipient)
> Response: 450 Host Down (the intended recipient)
> Deferring message
>
> The recipient's ISP claims to have never received any message. We can
> successfully email this recipient using a different email client.
>
> Any ideas?
This is really a question best posed on the support forums. These forums
are intended for peer support for software developers. However, since
you can provoke the behaviour at will could you use a number of
techniques to investigate it. Given the description I'd guess at DNS
problems first. Start with NSLookup (preferably on your host that does
the SMTP forwarding). Then use the following commands:
SET TYPE=MX
foreign.domain
Replace foreign.domain with the domain name you can't send to, e.g.:
SET TYPE=MX
novell.com
You should see the mail exchanger (MX) record for the domain and the
address (A) record for the mail exchanger. Then switch to a public
server that is external to your own domain/network:
SERVER 137.65.1.1
SET TYPE=MX
foreign.domain
137.65.1.1 is Novell's public DNS server and it will do recursive
lookups for external queries. If the result of the second set of
commands is different from the first then the probable cause is DNS
mis-configuration on your mail forwarder. It could be that it has the
wrong DNS IP or that the DNS server it is using has a stale MX or A
record for the problem domain.
If that doesn't work you could try Ethereal or another packet capture
application to capture frames that target the foreign domain's MX IP
address and simply send it an e-mail. You should capture the SMTP
exchange and the cause might be obvious. Note that you will have to run
the capture program on your mail forwarder or use a hub or configure a
switch port to echo your mail forwarder's switch port. -
450 host down to some domains.
We could not send mails to some domains, the message is 450 host down. When I try to do dnsstuff check on those domains, this is what I get, is this really normal.
Your 1 MX record is:
10 mx.company.com [TTL=86400] IP=6x.1xx.1xx.1aa [TTL=86400] [IT]
IP=6x.1xx.1xx.1bb [TTL=86400] [IT]
IP=6x.1xx.1xx.1cc [TTL=86400] [IT]
IP=6x.1xx.1xx.1dd [TTL=86400] [IT]
IP=6x.1xx.1xx.1ee [TTL=86400] [IT]
IP=6x.1xx.1xx.1ff [TTL=86400] [IT]
It seems they have one mx record with changing IP addresses. Is this something new for security ?
Then my smtp cannot figure which IP address to use. And I cannot event telnet port 25 on those servers or even ping.
But they claim they can get e-mails from every where apart from my host. I tested and sent and e-mail from yahoo and it was delivered.
This is what I expected if I look at yahoo with dnstuff.
Your 13 MX records are:
1 d.mx.mail.yahoo.com. [TTL=1800] IP=209.191.88.254 [TTL=1800] [US]
1 e.mx.mail.yahoo.com. [TTL=1800] IP=67.195.168.230 [TTL=1800] [US]
1 f.mx.mail.yahoo.com. [TTL=1800] IP=98.137.54.237 [TTL=1800] [US]
1 g.mx.mail.yahoo.com. [TTL=1800] IP=98.137.54.238 [TTL=1800] [US]
1 h.mx.mail.yahoo.com. [TTL=1800] IP=66.94.236.34 (No Glue) [TTL=1800] [US]
1 i.mx.mail.yahoo.com. [TTL=1800] IP=74.6.140.64 (No Glue) [TTL=1800] [US]
1 j.mx.mail.yahoo.com. [TTL=1800] IP=66.94.237.64 (No Glue) [TTL=1800] [US]
1 k.mx.mail.yahoo.com. [TTL=1800] IP=98.139.54.60 (No Glue) [TTL=1800] [US]
1 l.mx.mail.yahoo.com. [TTL=1800] IP=74.6.136.244 (No Glue) [TTL=1800] [US]
1 m.mx.mail.yahoo.com. [TTL=1800] IP=66.94.238.147 (No Glue) [TTL=1800] [US]
1 a.mx.mail.yahoo.com. [TTL=1800] IP=67.195.168.31 [TTL=1800] [US]
1 b.mx.mail.yahoo.com. [TTL=1800] IP=74.6.136.65 [TTL=1800] [US]
1 c.mx.mail.yahoo.com. [TTL=1800] IP=206.190.54.127 [TTL=1800] [US]Sorry about this, just forget it. It was just that IP's were being blocked
Originally Posted by grpadmin
We could not send mails to some domains, the message is 450 host down. When I try to do dnsstuff check on those domains, this is what I get, is this really normal.
Your 1 MX record is:
10 mx.company.com [TTL=86400] IP=6x.1xx.1xx.1aa [TTL=86400] [IT]
IP=6x.1xx.1xx.1bb [TTL=86400] [IT]
IP=6x.1xx.1xx.1cc [TTL=86400] [IT]
IP=6x.1xx.1xx.1dd [TTL=86400] [IT]
IP=6x.1xx.1xx.1ee [TTL=86400] [IT]
IP=6x.1xx.1xx.1ff [TTL=86400] [IT]
It seems they have one mx record with changing IP addresses. Is this something new for security ?
Then my smtp cannot figure which IP address to use. And I cannot event telnet port 25 on those servers or even ping.
But they claim they can get e-mails from every where apart from my host. I tested and sent and e-mail from yahoo and it was delivered.
This is what I expected if I look at yahoo with dnstuff.
Your 13 MX records are:
1 d.mx.mail.yahoo.com. [TTL=1800] IP=209.191.88.254 [TTL=1800] [US]
1 e.mx.mail.yahoo.com. [TTL=1800] IP=67.195.168.230 [TTL=1800] [US]
1 f.mx.mail.yahoo.com. [TTL=1800] IP=98.137.54.237 [TTL=1800] [US]
1 g.mx.mail.yahoo.com. [TTL=1800] IP=98.137.54.238 [TTL=1800] [US]
1 h.mx.mail.yahoo.com. [TTL=1800] IP=66.94.236.34 (No Glue) [TTL=1800] [US]
1 i.mx.mail.yahoo.com. [TTL=1800] IP=74.6.140.64 (No Glue) [TTL=1800] [US]
1 j.mx.mail.yahoo.com. [TTL=1800] IP=66.94.237.64 (No Glue) [TTL=1800] [US]
1 k.mx.mail.yahoo.com. [TTL=1800] IP=98.139.54.60 (No Glue) [TTL=1800] [US]
1 l.mx.mail.yahoo.com. [TTL=1800] IP=74.6.136.244 (No Glue) [TTL=1800] [US]
1 m.mx.mail.yahoo.com. [TTL=1800] IP=66.94.238.147 (No Glue) [TTL=1800] [US]
1 a.mx.mail.yahoo.com. [TTL=1800] IP=67.195.168.31 [TTL=1800] [US]
1 b.mx.mail.yahoo.com. [TTL=1800] IP=74.6.136.65 [TTL=1800] [US]
1 c.mx.mail.yahoo.com. [TTL=1800] IP=206.190.54.127 [TTL=1800] [US] -
450 host down on GWIA not always correct it seems
Folks, every once in a while we get a 450 host down to a specific domain. I
telnet that mail server and it does appear "down", does not respond on port
25.
However: They receiving domain insists they are not down and are receiving
messages from other domains and in fact test as we are on the phone and what
do you know they are receiving. So I run a test from mxtoolbox.com, and
somehow, even though my telnets fail and our gwia 7.0.3 fails as well,
mxtoolbox.com does not fail. The results from mxtoolbox.com are posted
below.
What is the deal? Why does telnet and GWIA both fail but not other mail
gateways. Is there something lacking in the GWIA technology?
SuperTool Beta
Command:
smtp:216.55.101.108 smtp
220 spamwall.mchsol.com ESMTP SpamWall
Not an open relay.
0 seconds - Good on Connection time
0.172 seconds - Good on Transaction time
OK - 216.55.101.108 resolves to spamwall.mchsol.com
OK - Reverse DNS matches SMTP Banner
Session Transcript:
HELO please-read-policy.mxtoolbox.com
250 spamwall.mchsol.com [47 ms]
MAIL FROM: <[email protected]>
250 Ok [47 ms]
RCPT TO: <[email protected]>
554 <[email protected]>: Relay access denied [31 ms]
QUIT
221 Bye [47 ms]
reverse lookup smtp diag port scan blacklist
Reported by mxtoolbox.com on Thursday, April 01, 2010 at 7:00:50 PM (GMT-5)
(History)
Martin Stepanek
Max International Associate
[email protected]
(705) 794-7181
( http://www.maxgxlnorth.ca/ )
There is no chance, no destiny, no fate that can circumvent or hinder or
control the firm resolve of a determined soul. - Ella Wheeler WilcoxOn 4/3/2010 11:57 AM, Martin Stepanek wrote:
> you didn't quite understand Ted or I didn't quite explain adequately.
> Thanks for you reply btw.
>
> When I found their correct MX, I telneted to the ip address on port 25 and
> no response. But yet that same IP answered a mail gateway. Is there a way
> with some mail exchanger to not reply to telnet?
>
> Martin Stepanek
> Max International Associate
> [email protected]
> (705) 794-7181
> ( http://www.maxgxlnorth.ca/ )
> There is no chance, no destiny, no fate that can circumvent or hinder or
> control the firm resolve of a determined soul. - Ella Wheeler Wilcox
>
Sure
a) transient issues in general.
b) broken "protections" that are blocking you as a suspected mailbomber.
These would block your ip address for a while and then stop. They
wouldn't block mxtoolkit -
We are running GroupWise 7.0.2. All mail seems to be going in and out just fine, but we receive hundreds of the following messages every day.
MSG ##### Detected error on SMTP command
MSG ##### Command: sacog.org
MSG ##### Response: 450 Host down (sacog.org)
DMN: MSG ##### Send Failure: 450 Host down (sacog.org)
The domain, sacog.org, is our domain.
Has anyone seen this before and know how to fix it?
thanks,
davidHi Massimo,
Y: is just the drive letter I have mapped to our GW system. I should have replaced it with VOL1.
Thanks for the update. I was about to post a follow up to my previous message. When I first made the change, I still saw several of the messages scroll by, but I've noticed that there are fewer and fewer of them as time goes on. I was wondering if it had to due with old messages.
Thanks again for all your help. These error messages have been on the back of my mind for several years. I've tried Google searches several times, but could never find an answer.
The messages that were causing these errors in GWIA, are they all return notifications of undeliverable e-mails that are coming back, but have been undeliverable to in-house users? Should they start seeing e-mails telling them if a message was undeliverable now?
thanks,
david
>>> Massimo Rosen<[email protected]> 7/19/2010 10:58 AM >>>
Hi,
> David Hodgson wrote:
>
> Thanks for the tip, however, I am still receiving the messages.
>
> I have added the file route.cfg to the folder
> Y:\Groupwis\gwdomain\wpgate\GWIA
What's "Y:"? ;)
> In the route.cfg file, I have the following two lines
>
> sacog.org [192.168.0.12]
> mail.sacog.org [192.168.0.12]
>
> I have restarted GWIA and I have also tried unloading and reloading
> GWIA, but still get the error messages.
That's normal for old messages still sitting in the queue, the change
will not apply to them. But new messages shouldn't produce it any more,
and it will gradually go away when the old defered messages expire. YOu
can check them in the .\defer directory of your GWIA.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de -
HT1725 trying to connect and getting host down check your connection and try again??
trying to connect and getting host down check your connection and try again??
GymnastGirl152 wrote:
Whenever I try to text ...
Remember, your iPad is not a cellular telephone. It cannot do texting in the way a cellular telephone can - using SMS over a cellular network. All it can do is iMessage - meaning it would use WiFi to communicate to another Apple device. -
Disp+work process was down after the Restoreing the backup
Disp+work process is down after the Restore of the backup
s/m configration: windows 2003 server + oracle 10g
The below is the log file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid PRA
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 2928
Thu Apr 07 18:58:10 2011
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2928) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Apr 07 18:58:15 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >pwsap_PRA_01 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
DpShMCreate: allocated sys_adm at 05C00040
DpShMCreate: allocated wp_adm at 05C01E28
DpShMCreate: allocated tm_adm_list at 05C065A8
DpShMCreate: allocated tm_adm at 05C065D8
DpShMCreate: allocated wp_ca_adm at 05FCBB70
DpShMCreate: allocated appc_ca_adm at 05FD1930
DpShMCreate: allocated comm_adm at 05FD3870
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06054730
DpShMCreate: allocated gw_adm at 06054770
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060547A0
DpShMCreate: allocated wall_adm at 060547A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Thu Apr 07 18:58:16 2011
J2EE server info
start = TRUE
state = STARTED
pid = 3208
argv[0] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1069
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PRA
argv[7] = -DSAPMYNAME=pwsap_PRA_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( pwsap) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >pwsap_PRA_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu Apr 07 18:58:17 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Thu Apr 07 18:58:42 2011
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1472
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1085) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3208)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Apr 07 18:58:56 2011
ERROR => W0 (pid 3216) died [dpxxdisp.c 14021]
ERROR => W1 (pid 3224) died [dpxxdisp.c 14021]
ERROR => W2 (pid 3232) died [dpxxdisp.c 14021]
ERROR => W3 (pid 3240) died [dpxxdisp.c 14021]
ERROR => W4 (pid 3248) died [dpxxdisp.c 14021]
ERROR => W5 (pid 3256) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3264) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3272) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3280) died [dpxxdisp.c 14021]
ERROR => W9 (pid 3288) died [dpxxdisp.c 14021]
ERROR => W10 (pid 3296) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 3304) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 3312) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:06 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Apr 08 01:59:06 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3216 Ended no 1 0 0
1 DIA 3224 Ended no 1 0 0
2 DIA 3232 Ended no 1 0 0
3 DIA 3240 Ended no 1 0 0
4 DIA 3248 Ended no 1 0 0
5 DIA 3256 Ended no 1 0 0
6 UPD 3264 Ended no 1 0 0
7 ENQ 3272 Ended no 1 0 0
8 BTC 3280 Ended no 1 0 0
9 BTC 3288 Ended no 1 0 0
10 BTC 3296 Ended no 1 0 0
11 SPO 3304 Ended no 1 0 0
12 UP2 3312 Ended no 1 0 0
Dispatcher Queue Statistics Fri Apr 08 01:59:06 2011
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Fri Apr 08 01:59:06 2011
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Apr 08 01:59:06 2011
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:11 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >pwsap_PRA_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPAREDtrc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Apr 07 18:58:16 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 01
M sid PRA
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3216
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3216) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Apr 07 18:58:17 2011
M ThInit: running on host pwsap
M
M Thu Apr 07 18:58:18 2011
M calling db_connect ...
C Prepending D:\usr\sap\PRA\DVEBMGS01\exe to Path.
C
C Thu Apr 07 18:58:27 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Thu Apr 07 18:58:28 2011
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10019]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *
M * LOCATION SAP-Server pwsap_PRA_01 on host pwsap (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 07 18:58:28 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10204
M * COUNTER 1
M *
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3216) [dpnttool.c 327] -
What is the correct way to temporarily disable notifications for host down? I have about 10 different
"environments" set up in the domain at this point. During the initial installation I created the domain
and discovered all my clients via ip. Each subnet cloud(upon detection, a host would appear underneath a
cloud pic for each subnet) represents the environment and each server has two parents...the subnet it
belongs to and the parent domain.(This isnt exactly true..simplified for explanation). Anyway, the email
addresses for notification to the respective admin groups are configured in each subnet cloud and each
host is setup for group based actions(the 4 checkboxes for host/agent up/down). I didnt setup anything at
the domain level since I need different email addresses for each subnet cloud. If I need to take a host
down I uncheck those 4 boxes wait a few minutes and usually I do not receive notification...it works. The
problem is sometimes I still receive notification from the master server. I was initially under the
impression this was due to polling gaps from the master to each client(~100 clients or so), but now I'm
not so sure. In 3.5x I modified the polling times but I haven't changed that yet since the move to 3.6.
I also sometimes receive notification from the master server about what seems to be the subnet cloud
object itself for some reason which allegedly is a non monitored object. I'm still baffled by that one.
Regardless, I have not seen another installation of this product or even the console so I'm sort of flying
blind here except for what documentation I have found on Halcyon's and Suns website.(there were a couple
of screenshots, but very few that I have been able to find)What is the correct way to temporarily disable
notifications for host down?Out-of-the box the documented way is what you're doing - uncheck the notifications for the individual hosts or the folders they are in.
If you're looking for something a little easier to maintain for that volume of systems, try EventAction free unrestricted for 30 days:
http://www.halcyoninc.com/products/EventAction/index.php
To disable notification you can just add a "-(hostname/IP)" flag to your overall email rule, or you can define 10 email actions for hosts in your 10 different folders and enable/disable each group with a single point-and-click.
Sample parameters you can create rules for can be seen here: http://www.halcyoninc.com/products/EventAction/help/HALEventAction-adding-h.html#HALEventAction-adding-filters
Regards,
[email protected]
Maybe you are looking for
-
Can you automate an iPad keynote presentation like a slide show?
I have a very basic keynote presentation that I've created on my iPad 2. No fancy transitions, etc. Essentially slides with pictures and information. I need to have it run like a slide show and repeat itself over and over for a static display. Ca
-
Someone Got A How To For Adding Video?
The examples cited in the Apple tutorials are for Macs from what I can find... and I see a ton of people posting on this topic and not getting answers... soooooooo... I have a friend with a new 30GB video iPod...all the updates have been run for iTun
-
Hello friends We don't have a Basis guy here. I am an XI certified person wearing different caps. I am trying to append a structure to VBAK and when I try to make the change it is asking for access key. I looked at other SDN postings regarding this b
-
Which is better? Photoshop CS6 or Elements? And why?
Wife is an avid photographer and likes to be able to fix photos, make collages. Confused on which is better, Photoshop CS6 (and what is Extended?) or Elements? What are the pros and cons of each? Thank you for your time.
-
Login page user name and password for Oracle Database
Hi, I created a login.jsp page with username,password and a submit button. How can I validate this username and password from my Oracle database username and password? I am using NetBeans5.5 with Tomcat5.5.17. Right now I have hardcoded username and