Host flapping between port

Question

Hi All,
I have spent quite long to fix the flapping port, How to fix this problem?
---------from the log------------
Nov 15 11:47:52 CCT: %C4K_EBM-4-HOSTFLAPPING: Host 00:13:E8:73:5A:47 in vlan 66 is flapping between port Gi1/13 and port Fa3/12
Nov 17 12:11:12 CCT: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 000e.5308.f3bd on port FastEthernet3/4.
Nov 17 12:31:48 CCT: %C4K_EBM-4-HOSTFLAPPING: Host 00:1D:E0:8B:8E:99 in vlan 62 is flapping between port Fa3/10 and port Gi1/17
Nov 17 15:05:17 CCT: %C4K_EBM-4-HOSTFLAPPING: Host 00:16:6F:60:DE:AB in vlan 62 is flapping between port Gi1/15 and port Fa3/10
Nov 17 18:40:16 CCT: %C4K_EBM-4-HOSTFLAPPING: Host 00:1B:9E:AB:C3:F7 in vlan 62 is flapping between port Gi1/17 and port Fa3/10
Nov 17 20:35:19 CCT: %C4K_EBM-4-HOSTFLAPPING: Host 00:16:6F:60:D5:8E in vlan 66 is flapping between port Gi1/13 and port Fa3/12
-- cut --
Thanks

Answer 1

We had multiple redundant links between switches, and then the servers were connected to each switch. It was a mess. I removed many of the links and left only two.
Do you have all of your SSIDs in the same VLANs across the ports? In other words, do you have it like:
guest - vlan 100
secured - vlan 105
If that's the case, and the access points are all configured this way, you shouldn't see a flapping I wouldn't think. I would verify that it's an access point in these ports that are flapping, and then work backwards from there.
--John