Host Name configuration

How or where can I change the Host Name for the Engine Node?
Anyone?

At the webconsole, select the engine, then selecte engine node and add the new host name then delete the old. After than restart the engine

Similar Messages

Host Name Configuration for Ironport

Hi,
I want to configure one host name with two ipaddress.
Which record we can create???
If both the IP's in Domain, we can achieve this???
Thanks in advance
Regards, Hari Prasad.D

Hi Hari,
If we creat CNAME record, we can map multiple FQDNs to single IP address.
If we want to map multiple IP addresses to single FQDN, just create two A records with same name, then point them to different IP addresses.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Database host name changed, what needs to be configured in obiee 11g

Hi,
we recently changed database Hostname. What are the next steps to configure in obiee? when i login to oracle enterprise manager, all the services are down?
Please any help is appreciated .
Thanks,
Ashwini K

Check this Rittman Mead Consulting &raquo; Blog Archive &raquo; Oracle BI EE 11g – Managing Host Name Changes

ITS Host Name in portal configuration

I am in need of ITS Host Name in portal configuration,but i dont know what exactly i have to give for that.pls suggest me.
Thanks
Ramesh

ITS host name is :your portal name:8001

Configure Mail to use host name

Hi,
I'm trying to configure Mail on a Mac Mini Server. My problem is that I can't get the from email address to show correctly. The host name is demo.company.com, however email arrives with appleserver2.local (domain name). I've setup two accounts - administrator and user. When I send email from administrator to user it shows as coming form [email protected] - what I want it to show is [email protected]?
I found an article (http://serverfault.com/questions/55342/change-email-domain-os-x-server) which seemed to ask the same question. The accepted answer made some changes to the main.cf file:
myorigin = $mydomain
mydestination = $myhostname localhost.$mydomain localhost $mydomain
After I made the changes I restarted the Mail service, but it didn't solve my problem. I even rebooted the server but no change.
Also, am I correct in thinking that a user's email address is configured using the Workgroup Manager under the Info tab?
Mark

I cannot recommend this, as I am not sure all the intergrations with other apps and databases would work properly, but see:
http://hintsforums.macworld.com/showthread.php?t=108443
Are you sure this is worth it? My Mail folder is a long term archive, and I don't delete many messages. Yet it is less than 20 GB. Sounds like other apps and databases will overtake your space savings quickly.
Ernie

Configuration changes when the host name gets changed

hi,
Can you please let me know what I should change and where if I change my host name after installing EP NW'04?
Anything in Config tool and anything in DB?
Chandra.

Here you go:
We used a combination of these 2 docs to do it successfully.
SAP Note: 757692
Good HP Doc on it.
http://docs.hp.com/en/T2357-90007/ch03s06.html
jwise

Need list of places where the portal configures the exchange host name

Hello,
Our exchange server is changing it's host name.
Can anyone please give me a list of <b>detailed places</b> at the portal, admin tool and config tool where I should apply this change?
Regards,
Roy

it is stored as encrypted nameNo it isn't. It is stored in a format defined in this case by Windows. There is no encryption here.
I want to know the list of unicode characters which are affecting the file namingIt would be considerably more sensible to find out the characters that are legal in filenames. There are a lot fewer of those ;-)
Personally I just use the ASCII characters excluding & and /.

How can I create a host name site collection when I have a 443 web application already created for App model?

Hi all,
I have a 2013 farm set up with the App model
1 web application for path based site collection using host name
1 web application with SSL (no host name)
1 web application for mysite
My business request is that I need to migrate SSL enabled 2007 content to this farm and use host name site collections. I tried to create one more web application for this without any luck (the 443 IIS folder is already used by another web application).
I thought I bind the previous 443 web application with another IP address should be fine. Seems like the IIS site is taken (https://server name:443) so it will not let me create one more. How can I solve this problem so I can create the web application
to host those host name site collections? Any suggestion is greatly appreciated.
Thanks in advance.
Sally

Hi Trevor,
Thanks again for your quick reply. I try the option 2 right after your post. I use my front end server name for public URL (https://WFEName:443) and it fails again. The error message is:
The directory C:\inetpub\wwwroot\wss\VirtualDirectories\443 is already being used by another IIS Web Site. Choose a different root directory for your new Web application.
After reading more, I saw mix Hosted Name Site collection and Path-based site collection aren't recommended. Unfortunately I already have Path-based site collection created with App model web application
(the web application without host name) in my farm. In my Option 2, that web application without host name is used for App routing. This takes the root folder 443 which will not allow any other web application to use the same name again.
Does that mean we can't create Host Named Site collection in the same farm? Is there any configuration I need to check?
Thanks again.
Sally

Domain name/"primary DNS" name/mail host name/mail server name/mx name

Hi,
I have registered my domain name (N.com) with an external dns server and created an MX record (mail.N.com) for it as well. My server sits behind a router and internet traffic is port(80)-forwarded to my server's fixed internal ip address (I can access my webpages from the internet just fine). When I initially setup the server I was asked to give it a "primary DNS name." I naturally assumed that N.com was supposed to be entered here, but that just caused all kinds of problems (though I still do not understand why). So I reinstalled and currently have server.N.com as the primary DNS name of the server (although it shows up in Server Admin and Workgroup Manager as server.local--why is that?)
I have had no luck getting any email from the internet with the default settings in mail services (domain name of N.com and host name of server.N.com). Having no luck with the defaults, I assumed that maybe I needed to change the host name to "mail.N.com" so that it matched the MX record. I also changed the user preferences in Workgroup Manager to receive mail from mail.N.com--but still no luck. Could someone tell me what I am doing wrong and how come none of the Mail Service literature mentions anything about what a mail "host name" is supposed to be? Is it supposed to be the same as the "Mail Server" name that Workgroup Manager asks each user for? and is it the same as the MX record name?
I am just needing some help to connect all these variously named, but undefined, dots.
Also, how come I can access webmail from the internet using www.N.com/webmail but can't do it from any computers within my physical network (I have to use IPaddress/webmail or server.local/webmail)?
Also, should my user email addresses be [email protected] or [email protected] (which is the current default)?
Thanks in advance and good luck!
John

I had been told by a friend that ... regular email coming in from the internet would go through port 80
Unfortunately you were misinformed.
My MX record needs the extra subname (such as "mail") in front of the domain name, right?
Not at all. A MX record for 'N.com' is entirely valid (expected, in fact).
An MX record tells remote mail servers where to send mail for any domain/subdomain. If you think about it, let's say you worked for Apple and you wanted people to be able to send email to [email protected], well then you need an MX record for 'apple.com'.
You can see if you dig MX apple.com that they actually have 9 MX records, but the point still stands.
Now, you might also have MX records for subdomains so that you can have [email protected], [email protected], [email protected], etc. Each of these subdomains would need a separate MX record.
So, in general, for any set of email addresses @[anything.]domain.com you have a MX record telling remote mail servers where to send that mail.
Of course the MX record name is mail.N.com, but I think you are implying that the in the Mail settings of Server Admin where it asks for domain name all I need to put there is the N.com, right?
What I mean is that you need to set the domain name to whatever domain name you expect to receive mail at.
If you want users to have email addresses in the form of [email protected], then you enter 'N.com'.
If you want users to have email addresses in the form of [email protected] then you enter 'mail.N.com'.
If you want both forms, enter one in the main domain and add the other(s) in the Advanced -> Hosting -> Local Host Aliases section.
Is there anything in the Mail settings that needs to have the full MX record name (mail.N.com)?
Yes. Either the 'domain name' or the 'Local Host Aliases' needs to contain the same thing as your MX record. That's because the MX record tells remote servers to send mail to this machine, but the machine won't accept the mail unless it is configured to do so.
What is the "host name" supposed to be?
This should be the name that remote servers see when this machine tries to send outgoing mail.
Ideally this should match the reverse DNS of your IP address, that way when it connects to a remote server it says "Hi, I'm $hostname" and the remote server can lookup the machine's IP address and see the same result. This will reduce the problem of remote servers thinking you're sending them spam.
If you only have a single IP address then this probably needs to be something like 'N.com'. If you don't have control over your reverse DNS then you're going to run into a problem.
Also in the user accounts (in Workgroup Manager) what should the "mail server name" be? Is it the host name or the domain name?
Off hand, I don't know.
Also, why are all the default user email addresses [email protected] (the name I gave the server at setup)? Why doesn't the user accounts create [email protected] as the default address?
Presumably because the mail server says it is 'server.N.com' and therefore any accounts on that machine would be [email protected]. Changing the domain name (as above) should fix that.

Web Dynpro Application URL Host Name Not Correct

Hello,
I am developing a web dynpro application in our development system but when I activate the application it gets a URL that points to our test system. When I test the application in HTTP Service (SICF) the URL for the development system is passed to the browser. WHere do you maintain the host that is being used to build the URL for the web dynpro application when it is activated.
Thanks,
Jim N.

Hello,
To configure the FQDN (host name full), please take a look at these:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm] and
[http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm].
Regards,

Cannot resolve host names on local network

It is a local network with router, few Windows computers with shared drives and one Mac.
Windows shares appear correctly in SHARED and can be used without any problems, like iTunes and iPhoto libraries are on those shared drives and work properly, even if ip address of those computers would change.
BUT - if I am trying to use VNC and connect to hostname:port, it says that server is not specified. If I try to ping hostname it says Unknown host.
At the same time, similar ping from Windows computer work without any problems.
It could be possible that router does not support something standard and communicates with Windows using something windows-specific, but what confuses me is that I can see computer names resolved in the finder already! Also, as I said iTunes and iPhoto can work with shared files on dynamic ip's which would be not possible if host names would be not resolved.
Thanks.

Domain Name Resolution for local IP addresses require a Local DNS server running on your network.
Bonjour names will resolve without a Local DNS server. So this is why iTunes and iPhoto works as they use bonjour technology.
A bonjour name ends in .local so in your macs sharing preferences you give the mac a name of imac its bonjour address is imac.local
Other than that you are best giving your devices fixed IP address and adding there hostnames to your hosts file.
the contents of /etc/hosts on your mac would look like
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
so at the above that you could add for example
192.168.1.5 mypc
192.168.1.6 myprinter
Then you could ping 192.168.1.5 by
ping mypc
So would have to add these entries to each hosts file on every computer on your lan.
Or you could setup a local dns server and give each computer on your LAN a fully qualified domain name.

Full qualified host name not appearing in url within WSDL generated from PI

Hi
We are on PI711 ( AIX OS ) and are stuck with an issue of the fully qualifed hostname not appearing within WSDL file generated in PI71 for a webservice it exposes using the Integration builder
We changed the host name in exchange profile ( all locations ) from hostname to hostname.companyname.intra and also in the ABAP stack as recommended in all OSS notes.
We use the Integration Directory --> Sender Agreement --> Display WSDL option to generate the WSDL.
Its to be noted that all locations ( including url for WSDL ) have the fully qualified hostname except the url within the WSDL.
Dioes anyone come across this issue/ know which parameters to be updated on the PI server to make the url within the WSDL for the PI webservice to have the fully qualified host name ?

HI Karthik,
As Mentioned by Baskar donu2019t use proposed URL .. while creating WSDL in Id.. but instead provide URL in following format and use it in that place and create WSDL.. details about URL format..
the URL format is fix. and it is simple.
http://host:HTTPPort/XISOAPAdapter/MessagingServlet?channel=party:sendersystem:CC_sender
in above URL provide your sender service component name instead of sender system.
and provide SOAP sender communication channel name in place of CC_sender
provide your PI system host and http name in place of host and https and use this..
for more details about URL..
Propose URL when Configuring Sender SOAP Adpater
soap url
Thanks,
Bhupesh

How to get Service instance host name(s)

I have a a list of Cloud Service host names that are connected to our azure DB
host_name
RD00133D57C3B2
RD00133D80CF2E
RD00133D52C765
RD00133D52CE41
RD00133D52C926
But i have no idea how to tell which cloud services those are.
Get-AzureService, Get-AzureRole & Get-AzureDeployment are not returning this data.

On one hand, as according to
http://msdn.microsoft.com/en-us/library/ms176013.aspx, you shouldn't rely on that hostname due to some security mechanisms that are in place.
Content not found
We could not find the page you requested.
On the other hand though, you can also configure your own hostname for your VMs in the .csfg file, as according to
http://msdn.microsoft.com/en-us/library/windowsazure/jj156072.aspx. However, I'm not 100% positive whether .NET Framework will use the configured hostname as the exposed hostname
to SQL. You might give it a try though ;)
Server Error in '/' Application.
So there is no way to reverse out that Hostname from the instance with powershell?

Host name problem

Hi,
whenever I excute the web application ,it is not showing the result.I found that there is a problem in configuring of host name by using the function module "RSBB_URL_PREFIX_GET".The value for E_URL_SERVER is in the format ls3022 rather than ls3022.wdf.sap-ag.de.
So it has the only host name but not the domain (including the extension).How can i change this value to complete host name(including the domain).
With rgds,
Anil

Hi Deepu,
Thank you for your help.
Could u clarify my silly doubt. If we are running the BW server on Unix,Is there any domain in this case.
With rgds,
Anil

Host name changed on server after router reboot?

I recently installed a new router and when I started my Mac Pro the server (10.7.5) Serverwould not respond and I received an error message stating the host name has changed on my server. I can not recall what I did nut I got the server working. I had to reboot teh router again and have received the following email:
From: [email protected] (System Administrator)
Subject: Network change notification for discussion.pharmweb.net
Date: 26 January 2013 12:48:52 GMT
To: [email protected]
The host name of discussion.pharmweb.net has changed to discussion.lan. Some services may not work correctly until they have been updated to use the new configuration.
I can not get the server to respond to web requests and am not sure what to change, Sharing is showing my local hostname as discussion.local
Help...

Are you sure it wasn't just the server's LAN IP that changed?
Is it set to Manual ?
If your server is behing a router with a NAT address, then a change in the public IP shouldn't have caused that error. I bet your LAN IP changed and now you don't have port mapping correct. pherhaps the public IP changed also, but my money is on the LAN address.
If its the LAN address, there is no point waiting for the ISP.
Set it back to the address it used before and make sure the router provides NAT with port mapping to that address.
Thats all in your control, not the ISP.

Host Name configuration

Similar Messages

Maybe you are looking for