Host name of KDC for SPNEGO?

Hi,
Is the Host name of the Key Distribution Center the same as the Active Directory Domain.
We have only one active directory domain, the domain is mycompany.internal.
Will the host name of the KCD will also be mentioned as mycompany.internal in the spnego wizard?
Regards
Deb
Edited by: Debasish Sarkar on Oct 20, 2008 7:25 PM

Hi,
We have only one active directory domain, its mycompany.internal.
XYZ is one of the active directory servers in this domain. Hence the fully qualified domain name for XYZ is xyz.mycpmpany.internal.
The primary domain controller is xyz the fully qualified name of this server is xyz.mycompany.internal.
We have created the service user j2ee-ecd in the xyz ADS server.
Now, when configuring SPNEGO through wizard, whats are the value to be provided in the following parameters:
Realm Name: mycompany.internal
KDC Host: ?
Principal Name: ?
Regards
Deb

Similar Messages

Getting host name or ipaddress for viirtual server

I want to get the ipaddress or host name for virtual server in a cluster environment. If i do
java.net.InetAddress.getLocalHost().getHostName()
it returns the ipaddress of the physical node currently running virtual server.
Is there any way to get the ipaddress or host name for virtual server ?

Might help to define what you actually mean by "virtual server" and what you actually want as well (and from what process.)
For example a clustered system with a single entry point. And you want the client to have the entry point. In this case the virtual address (ip and/or host) should always be returned. You can't get the individual address of a specific server. If that is not the case then something is wrong with the clustered system, not java/client.
Another example, a server in the cluster. Then it only knows about its own real address. If you want the cluster then you have to explicitly deliver that information to it, the box itself does not know it.
Something else?

How can I create a host name site collection when I have a 443 web application already created for App model?

Hi all,
I have a 2013 farm set up with the App model
1 web application for path based site collection using host name
1 web application with SSL (no host name)
1 web application for mysite
My business request is that I need to migrate SSL enabled 2007 content to this farm and use host name site collections. I tried to create one more web application for this without any luck (the 443 IIS folder is already used by another web application).
I thought I bind the previous 443 web application with another IP address should be fine. Seems like the IIS site is taken (https://server name:443) so it will not let me create one more. How can I solve this problem so I can create the web application
to host those host name site collections? Any suggestion is greatly appreciated.
Thanks in advance.
Sally

Hi Trevor,
Thanks again for your quick reply. I try the option 2 right after your post. I use my front end server name for public URL (https://WFEName:443) and it fails again. The error message is:
The directory C:\inetpub\wwwroot\wss\VirtualDirectories\443 is already being used by another IIS Web Site. Choose a different root directory for your new Web application.
After reading more, I saw mix Hosted Name Site collection and Path-based site collection aren't recommended. Unfortunately I already have Path-based site collection created with App model web application
(the web application without host name) in my farm. In my Option 2, that web application without host name is used for App routing. This takes the root folder 443 which will not allow any other web application to use the same name again.
Does that mean we can't create Host Named Site collection in the same farm? Is there any configuration I need to check?
Thanks again.
Sally

Host Name in Webdynpro

Hi All,
I have a webdynpro ABAP application which gets triggered from different Portal systems.
How to get the Host name of the Portal systems in my application as i need to provide different functionality for each portal.
I am trying to distinguish them based on the host names.
Points for sure..
Regards,
Abhishek

Hi,
Please have a look at this link for more-
How to read the Domain and Port of our server
Regards,
Lekha.

How to get the Host name and port number

Hi all,
I am working in xRPM. I need to get the server name, host name & port number for the portal and i need to diaplay as a link in the Workflow step. I cant give the portal link as static, as it will vary depends on the DEV, QUAL, PROD. Is there any FM or class is available, so i can get the server name, port no. for my purpose?.
Regards,
Vinoth

Hi Kanagaraja,
My client has configured the portal and backend in different stack. So when i execute the FM you provided and with class: CL_HTTP_SERVER, CL_WD_UTILITIES, i am getting only the backend host name and port no. not the portal's info. So please help is there any way we can get the portal's info.
Thanks for your reply.
-Vinoth

Host name not showing up under Active Clients

When I go into my router and check active connections, I can see all host names like "Acer Laptop", "IPhone" etc..., IP and MAC address' that are connected to router. Today, when I was in there looking, I saw an asterisk where host name should be for the TouchPad. (it took me a while to figure out it was the TouchPad) Is there a reason why Host name would not show up?
I have gone into "Device Settings" and set "Name" as "Chucks TouchPad". Is that the host name that should be showing on router?
Thank You for any assistance.
Post relates to: HP TouchPad (WiFi)

Sure is, but it will involve some commandline work. First, you're going to need to install the SDK. You only need the Novacom part of the SDK, but AFAIK there's no seperate download for Windows... you have to get the whole thing. The SDK is available here: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html
Next, you're going to need to enable Developer mode on your TouchPad, here's how to do that:
Start a Just Type search and enter webos20090606
A Developer Mode icon will display, tap it
Tap the toggle switch to turn it On
Leave the password blank and tap Sumbit
Close the Developer Mode app
Now, connect your TouchPad to your computer. Next, you're going to find a file called Novaterm.bat. It's buried in the install directory of the SDK. I don't remember the exact path (I don't use Windows anymore) but it's something like C:\Program Files\Palm SDK\Current\bin (keep digging around for bin folders in the C:\Program Files\Palm SDK path and you'll find it eventually). Doubleclick that to start a nice little terminal app. Choose your TouchPad from the drop down list and click connect.
Now, time for some command line stuff. Run the following commands in the terminal:
mount -o remount,rw /
cd /etc/dhcp
vi dhclient.conf
Press the I key on your keyboard to go into edit mode (this is a Vi specific thing)
Remove the # at the beginning of line 14 and change the andare.fugue.com inside the quotes to whatever you want your TouchPad reporting as. For example: #send host-name "andare.fugue.com"; would become send host-name "RidiusTouchPad";
To save your changes, hit the ESC key (to exit edit mode), then type :wq and hit enter. Note there is a colon in there. Again, this is Vi specific stuff.
sync
mount -o remount,ro /
Once you've done this, disable and re-enable your Wi-Fi and your TouchPad should be reporting a hostname. Kind of a lot of work if you ask me (unless you already have the SDK installed).

Yahoo outgoing mail server host name

Having Yahoo mail issues with iphone4, It will not allow the auto yahoo mail add, I did add it under "other" and can receive mail but not reply to it.
I have the outgoing host name as smtp.mail.yahoo.com and below the server port is 25. I have changed the port yp 587 and 465 without result. Anyone know the correct outgoing outgoing server host name and port for yahoo mail?

This old fogey will try to help you.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

ITS host name and port.

Hi Experts,
What is integrated ITS host name and port for portal services? Where can I find the ITS Parameters to create a SYSTEM in Portal?
Regards,
Amit.

Hi Amit,
GO to SMICM toce in R3 system and clcik on (F) servicess button , u will get ITS host path and port number .
GIve this details in System object ITS .
ITS host name : from SMICM
ITS path should be /sap/bc/gui/sap/its/webgui
Surekha.

What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKS

Hello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

What are the userid,password, and host name for oracle 9i?

HI Guys.
I am a research student at the University and the I recently downloaded Oracle 9i for my research. But the problems is also with seting it up. Please could you show me the userid, password, and host name for oracle 9i.
Thanks in advance for your cooperations.
Malinga R
[email protected]

I believe that starting with 9.2, you have to specify different passwords when you install (can't be the default).
Justin

Entry for host name is missing or empty (Secure Store key: admin/host/).

Hi All,
I am in the process of installing EP7 on SLES9 and MaxDB 7.6 on a clustered HA environment where the SCS, DB and JC components are installed under and referenced by their virtual hostname (eg. sapinst SAPINST_USE_HOSTNAME <virt name>).
The SCS instance is installed, the Database Instance is installed and I'm currently in the process of Installing the JC and Deploying the EP packages.
During the installation, SDM is put into standalone mode and sapinst tries to deploy the package EPBC06_0.SCA where it fails and the sdm_server.err shows :
"com.sap.sdm.serverext.servertype.inqmy.TargetEngineConfigurationException: Cannot retrieve Engine logon data from Secure Store: Entry for host name is missing or empty (Secure Store key: admin/host/). at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getLoginDataFromSecStoreInQMyTargetSystemConfigurator.java:286) at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getEngineLoginDataInQMyTargetSystemConfigurator.java:197) at com.sap.sdm.serverext.servertype.inqmy.EngineStateServiceImpl.determineCurrentEngineStateEngineStateServiceImpl.java:53) at com.sap.sdm.app.proc.deployment.states.State.determineJ2EEEngineState(State.java:97) at com.sap.sdm.app.proc.deployment.states.StateBeforeFirstDeployment.getJ2EEEngineStateChangeDescriptionStateBeforeFirstDeployment.java:75) at com.sap.sdm.app.view.proc.deployment.mapper.StateMapper.map(StateMapper.java:56) at com.sap.sdm.app.view.proc.deployment.mapper.FlowMapper.map(FlowMapper.java:28) at com.sap.sdm.app.view.session.AppViewUpdater.updateAppView(AppViewUpdater.java:22) at com.sap.sdm.app.view.session.AppViewUpdater.sessionStateChanged(AppViewUpdater.java:18) at com.sap.sdm.app.proc.deployment.impl.SessionStateObserversImpl.notifySessionStateChangedSessionStateObserversImpl.java:46) at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:85) at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59) at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108) at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.processGuiAdminRoleCmdProcessor.java:72) at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67) at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommandCmdServer.java:76) at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286) at com.sap.sdm.is.cs.ncserver.NetCommServer.serveNetCommServer.java:43) at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serveServiceWrapper.java:39) at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50) at java.lang.Thread.run(Thread.java:816)"
The same problem occurs if I try to deploy this package or any other package using SDM in standalone or integrated mode.
configtool -> Secure Store -> admin/host/<SID> is the virtual hostname of the JC instance.
I've tried the following to no avail:
- Changed configtool -> Secure Store -> admin/host/<SID> to be the physical hostname of the box.
- Changed configtool -> Server -> Dispatcher -> Service -> P4 -> bindhost (from 0.0.0.0 to JC virt IP).
- Changed the <Host> entry in sdmrepository.sdc from <phys hostname> to <jc virt hostname>.
The SAPLOCALHOST, SAPGLOBALHOST all seem to be set correctly in the SAP profiles.
Has anyone had this issue? If so, what do I need to check/change? Any ideas?
Notice the message does not reference the <SID> in "admin/host", could this be related to the issue? If so, what can cause this?
TIA
Anthony

Hi All,
Just an update, I was able to get around my problems by patching the 2004s media from sp6 to sp8, uninstalling my scs, and database and re-installing from the patched media.

After specifying the external host name under outlook anywhere, users pop up for password

Dear All,
I have installed and configured exchange 2013 as a fresh installation on server 2012 and it worked fine till i changed
specifying the external host name under outlook anywhere(in exchange ECP -> Server -> server -> W12R2-Email2013).
My internal domain is starnavigator.lk and we have several accepted domains listed. but all the staff checked web mail through
mail.leoburnett.lk internally and externally. even now web mail is working fine.
After i added external host name as mail.leoburnett.lk
all the internal PCs start to pop up for user name and password and its not connecting.
even if I reversed back the settings, still prompt for user name and password. also auto discover cant locate the settings. if i configure the settings manually, i t works for first time and after restarting outlook, again prompt for name and password.Any
any advice or solution please??
Thx,
Dulana

Run this tool and post the result (only errors)
https://testconnectivity.microsoft.com/
After configuring outlook manually, run Test E-Mail Autoconfiguration and Connection Status and post the result.
Editing just an URL for OA shouldn't cause any issue.
Did you restarted IIS Service?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

Email host name for mailbean

Hi, I have a problem about finding my own email host name when I am trying to send an email within JSP. I have tried many names such as: "mail.gmail.com"," yahoo.com", and the one included in the code blow. I think I have a misunderstanding about this host name, could anyone explain for me please? Thanks a lot.
Blow is my code
* Mail.java
* Created on 2006年8月14日, 下午2:59
package myclass;
import java.io.*;
import java.util.*;
import javax.mail.*;
import javax.mail.event.*;
import javax.mail.internet.*;
* @author weiming514
public final class MailBean extends Object implements Serializable{
private String to = null;
private String from = null;
private String subject = null;
private String message = null;
public static Properties props = null;
public static Session session = null;
static{
/** Setting Properties for STMP host **/
props = System.getProperties();
props.put("mail.smtp.host", "hostname");
session = Session.getDefaultInstance(props, null);
     /* Setter Methods */
     public void setTo(String to) {
          this.to = to;
     public void setFrom(String from) {
          this.from = from;
     public void setSubject(String subject) {
          this.subject = subject;
     public void setMessage(String message) {
          this.message = message;
/* Sends Email */
public void sendMail() throws Exception{
if(!this.everythingIsSet())
throw new Exception("Could not send email.");
try{
MimeMessage message = new MimeMessage(session);
message.setRecipient(Message.RecipientType.TO, new InternetAddress(this.to));
message.setFrom(new InternetAddress(this.from));
message.setSubject(this.subject);
message.setText(this.message);
Transport.send(message);
catch(MessagingException e){
throw new Exception(e.getMessage());
/* Checks whether all propertises have been set or not */
     private boolean everythingIsSet() {
          if((this.to == null) || (this.from == null) ||
          (this.subject == null) || (this.message == null))
               return false;
          if((this.to.indexOf("@") == -1) ||
               (this.to.indexOf(".") == -1))
               return false;
          if((this.from.indexOf("@") == -1) ||
               (this.from.indexOf(".") == -1))
               return false;
          return true;
Error:
unknown smtp host: hostname

and the one included in the code blow.You have written "hostname" in the code below. Since "hostname" is certainly NOT a valid SMTP host name,
that's why you get the error: unknown smtp host: hostname.
What did you expect? You must provide a valid SMTP host name, NOT "hostname". You see the difference right?
Try with your ISP (Internet Service Provider) SMTP host name.
It should be something like: stmp.somename.com.
That's the one you must set in your email client (Outlook, Thunderbird, Eudora, Lotus Notes, whatever) to send your emails.
Next time please paste your code between [code] tags with the help of the code button just above the edit message area.
Regards

Host name of KDC for SPNEGO?

Similar Messages

Maybe you are looking for