Host NIC Ceases To Route Traffic After A Certain Amount Of Throughput
Hi,
I'm hoping that someone may be able to assist me, or point me in the right direction. I have a pair of Dell R710's, running OVM 2.2.1, each running 2 OEL VM's. I am using the 4 onboard NIC's, each configured to a separate LAN. I can start the VM's, and after a period of time, they will lose connectivity to any one of the LAN's. If I try and access the destination from the Dom0, I receive "no route to host".
A power off/on of the VM's will restore connectivity. After speaking to Oracle, I was advised to set "tso off" for each of the interfaces in the host. This appeared to resolve the issue, but all it did was increase the time between the losses of connectivity.
I have a pair of Dell R710 / OVM 2.2.0 servers that don't exhibit this issue.
I'd appreciate any assistance.
Thanks
John
John,
Any luck on resolving this issue?
I have similar issue (Nics shutdown), with same hardware (Dell R710) have to hard boot the OVM Server to resolve. I have a been told it is related to bug.11713119.
Chris
Similar Messages
-
Hi,
I am in an exhibition space where I need to display my Muse website offline and locally on the desktop. I am looking for a way for the website to refresh after a certain amount of time so it can go back to the beginning of the page. Can someone help? Please!You can try the steps mentioned here :
http://stackoverflow.com/questions/2787679/how-to-reload-page-every-5-second
http://stackoverflow.com/questions/17886578/refresh-part-of-page-div
http://crunchify.com/how-to-refresh-div-content-without-reloading-page-using-jquery-and-aj ax/
Thanks,
Sanjit -
Can a sprite become visible after a certain amount of user inactivity?
Can a sprite become visible after a certain amount of user inactivity? like a timer triggering an event?
Hi Kevin,
You can look at the on timeOut event. (This is not to be confused with timeOut objects)
There are a number of related properties, which date back from the early days of Director, and which seem to have been omitted from recent versions of the documentation, even though they still function. I give them here with their original names (prior to Director 10):
the timeOutKeyDown
the timeOutLapsed
the timeOutLength
the timeOutMouse
the timeOutPlay
the timeOutScript
the lastClick
the lastEvent
the lastKey
the lastRoll
(You can also use the more recent DOM style for these last four properties: _player.lastXXX)
Here's a very simple script which will make sprite 1 disappear when the movie starts, and reappear if the user does nothing for 5 seconds:
on startMovie()
sprite(1).visible = FALSE
the timeOutLength = 300 -- = 5 seconds * 60 ticks / second
end startMovie
on timeOut()
sprite(1).visible = TRUE
end timeOut
If you click the mouse at intervals of less than 5 seconds after starting the movie, then the sprite will remain invisible.
NOTE: Using sprite(x).visible = FALSE will make the entire sprite channel invisible everywhere in the Score. It's better to use sprite(x).blend = 0, unless the sprite must not react to the mouse while it is invisble, in which case it is better to move it off-stage.
Is this what you are looking for?
James -
Click event on a label doesn't work after a certain amount of time?
I'm having a weird kinda a problem with my label.....I had given a click event on the label but the problem here is that...it won't take any event after a certain amount of time....i mean..it takes the event if you click on it when it is loaded but after sometime it won't take any event...
And there's one more thing which is that...i've some images too on the page but the images doesn't show up until and unless my mouse gains focus on the page...i.e I've to move my mouse over the page once then only i'm able to see the image...
Any help on how to solve this problem.....The problem is that...the project size is too big and i really don't know where to upload the project.....
Any help and still thanks for the reply...
Waiting... -
Youtube videos freeze after a certain amount of time, but audio continues.
As it says in the title, most Youtube videos freeze after a certain amount of time for me, but the audio continues.
Happens on Firefox, IE and ChromeThis happens mostly because of obsolate drivers.
http://forums.adobe.com/thread/945765?tstart=0 -
Just for the future on the ipad air there seems to be a white screen glitch after a certain amount of use. This needs to be fixed thanks
You are not talking to Apple here. We are all users trying to help one another solve issues with their iPads.
I have an iPad Air and have never experienced something that I would call a " white screen glitch."
Please explain exactly what is happening on your iPad, what you might have tried to fix it and what, if any, error messages you receive. -
Ok. So I just changed my ADMINISTRATIVE ROOT PASSWORD the other day and when I tried to log in today I forgot it. I tried different variations of
the password I had set, because I wasn't sure if i had maybe set it in Caps Lock or used a different number in the sequence. I got the message several times
about "too many attempts, try again later". Does the computer lock me from signing in even with the correct password after a certain amount of failed
attempts? If so, how long does this lock last for? When can I try again? Or is there something I need to do to remove that lock now? I'm pretty sure I
had the right password finally but it still wouldn't accept it.
Also, I don't have any other administrative users set up on my macbook pro. I'm the only one who uses it, so I've always just used that original User from my
original setup.giselafromclongriffin wrote:
Ok. So I just changed my ADMINISTRATIVE ROOT PASSWORD the other day and when I tried to log in today I forgot it. I tried different variations of
the password I had set, because I wasn't sure if i had maybe set it in Caps Lock or used a different number in the sequence. I got the message several times
about "too many attempts, try again later". Does the computer lock me from signing in even with the correct password after a certain amount of failed
attempts? If so, how long does this lock last for? When can I try again? Or is there something I need to do to remove that lock now? I'm pretty sure I
had the right password finally but it still wouldn't accept it.
Also, I don't have any other administrative users set up on my macbook pro. I'm the only one who uses it, so I've always just used that original User from my
original setup.
Do this:
1. Reboot
2. Hold apple key + s key down after you hear the chime. (command + s on newer Macs)
3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. After rebooting you should have a brand new admin account. When you login as the new admin you can change the passord on the old one. -
How do i set my ipod touch to automatically turn off after a certain amount of time?
how do i set my ipod touch to automatically turn off after a certain amount of time?
Please check "My Music Timer" app.
"My Music Timer" can stop iPod touch or spotify playing music.
https://itunes.apple.com/app/id787182095
Thanks -
My iphone says that icloud has not been backed up in 2 weeks...but after several attemps to back up, it continues to say "the latest backup did not complete"...I did have the phone plugged into my computer & connected to wi-fi..and it was locked...any idea why it won't complete the backup? it says total storage is 5.0 GB & available is 3.3 GB
Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up -
Calculation of withholding tax after the certain amount
Hello all,
I would like to ask you when you can customize the settings for withholding tax. We have received the request to set a new witholdng tax which should calculate after $1000 before IVA (if invoice before iva is $1001 should calculate withholding) if the amount is 1000, it should not calculate the withholding tax.
Is it possible? so far its set with base amount 100% and calculation witholdng tax rate: 5%, posting indicator 1.
thanks a lot for your appreciated feedback
regards
HanaDear,
Please use minimum and maximum amounts for your requirement in withholding tax calculation, go to spro-->financial account >financial accounting gs>withholding tax >extended withholding tax> calculation>min/max amounts>define min/max for types.
Here, give the mini amount as 1000. Now check how the system will calculate. -
Why does my iTunes stop playing after a certain amount of time?
When I begin a Playlist in iTunes on my 2009, 24 in. display iMac, it will suddenly stop playing after a few songs. I have looked through
every setting I can locate, but am unable to correct this problem. Has anyone else encountered this problem?On the webite for the station. look for a Listen link for another type of player. Many stations are going away from streams that iTunes can link to. while you're on the website. look for a Contact Us llink and report your trouble. They might not be aware there is trouble.
Do a Get Info, go to first tab and Edit URL.. Copy and paste the stream URL here so others can test it. -
Use last value if new value not avaliable after a certain amount oft time
Hey guys,
So I want the loop below to execute every half second,
however the "read power in" VI takes around 5 seconds to return a value, which means the loop can only operate every 5 seconds (it waits on a value from the "read power in" VI.
Is there a way to tell the program to use the last value of power returned from "get power" every 0.5 seconds if no new value has been returned?Ahhh, I see why you did this. I thought that diagram looked familiar. You posted this question: http://forums.ni.com/t5/LabVIEW/Search-string-value-to-return-integer/td-p/1330516
You need to use a USR (uninitialised shift register) to remember what the last string was that was not processed and prepend it to the last one. Attached is an example. The inner loop breaks up the string but remembers where it was broken the last time to allow it to spit out the next part of the string on it's next call. The outter loop reassembles the string and only spits it out if it has gotten a full string.
A
Attachments:
read partial till complete.vi 29 KB -
Here is what I'm trying to accomplish. I would like the narration to play on a slide, and some images will appear while the narration is speaking as well. Once the narration is done the questions will appear, and the user can select their answer. I do not see anywhere that I can set timings for the question area. I thought about making this into two slides, but if the user wants to hear the question again they would be unable to since it's on a previous slide. If anyone has an idea, or a workaround, please let me know.
The default objects on question slides (question type, question, answers, buttons...) are embedded in that slide, don't have a separate timeline, and that is why you cannot time them individually at all.
Two possible choices:
Create a custom question slide, using standard objects (over which you have total control), advanced actions and scored objects to transfer the score to a LMS if that is necessary
Use two slides as you already proposed: you can set the objects to display for the rest of the project, so that they also will be visible on the second, question slide. You can add a shape button to a question slide, to have the narration played again if the user wishes, using the same audio clip as you used as slide audio (I think) on the previous slide, now with the command 'Play audio'.
Lilybiri -
MS Word is losing its save location after a certain amount of time
we are having an intermittent problem where if we create a word document from sharepoint 2010.. then wait a while (1 minute to 10 minutes it changes) then click the save button in word (office 2013) the "Current Folder" (showing the current sharepoint
location) disappears. Does anyone know why this would happen. I have a hunch that its something to do with network connectivity since if I turn off and turn on my network adapter it has the same affect.
has anyone else had this problem? how to troubleshoot (we have been looking at wireshark traces and haven't seen anything obvious)
krdHi krd,
Based on your description, I recommend to verify the things below:
Did you mean the location of the document under Current Folder was missing? So no location was listed under Current Location or Was there another location displayed?
Check if this issue only occurs with the documents in SharePoint. Test with a document stored in your local drive.
Check if the library where you created the document exists or not in SharePoint.
Could you please provide a screenshot of this issue for further research?
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Collaps of notebook during image export after a certain amound of pictures
When I try to export a bigger collection of pictures, my notebook collapses a getting of after a certain amount of pictures. I have tried it two times and the amount of images when appears the collaps is the same.
It looks like, that export of images is very limited on my notebook. I am using LR 5.5, the notebook has SSD harddisk with anough free space.
Has anybody an idea what could by the reason?
RFAHello dj_paige,
I made the following two tests:
1. export of total 276 images, size 4608 x 2592 pix, export to harddisc,
size after export 4608 x 2592 pix, 240 dpi, 24 dpi, collaps after 123 images
2. export of total 276 images, size 4608 x 2592 pix, export to harddisc,
export parameters picture size max 1080x1080 pix, pictures size after
export 768 x 576 pix, 240 dpi, 24 bit, collaps after 212 elements
How does the collaps look like: when collaps appears, the power of the
notebook is just switching off. No error message, no warning - just getting
OFF. After restart of the notebook, the only hint is, that windows asks
wheather you will start on normal way or in safety mode. That all.
According to my opinion, there is a problem like LR handles the RAM. Even I
would increase the RAM, if I will export accordingly more images, the same
will happen.
Regards fom Czech Republic
RFA
Reinhold Fr. AUER Dipl. Ing. (FH)
Chudčice 273
CZ-664 71 Veverská Bítýška
telefon: +420 605 553 852
mail: [email protected]
2014-07-01 15:04 GMT+02:00 dj_paige <[email protected]>:
collaps of notebook during image export after a certain amound of
pictures created by dj_paige <https://forums.adobe.com/people/dj_paige>
in Photoshop Lightroom - View the full discussion
<https://forums.adobe.com/message/6512897#6512897>
Maybe you are looking for
-
Access denied error while trying to install graphics drivers
Hello, I have a new toshiba laptop P70-A. I have installed windows 7 and the pc was working excellent up until now. Noticed yesterday that the nvidia automated system failed to install the new update. When I tried to install the new driver manually,
-
Hi Team, I am trying to move the .pdf files from drop-off library to custom library. For the above requirement i am writing content organizer rule condition like (On Group: Document content types & Type: Document) Property: Name Operator: Ends with v
-
I've searched I've FAQ but I still don't know why my WRT54GS is making a beeping noise?
Hi!!!!!!
-
Hi, Is their any flow in PS module and what is the use of this tcodes ( cj40and 41). Can any one explain about the Tcodes : CJ40 and CJ41..
-
My computer locks-up when I do even simple tasks like moving layers or changing text size. I have XP os 1.5 GIG ram , I have an older machine with less ram and I do not have this problem. When it locks-up I must do a hard boot to start over. If anyon