Host Not Responding and Needs Assistance

I have a VMM 2012 R2 Cluster based on two nodes. Both nodes have similar hardware configuration. When I move the VMM Cluster to Node 2, I face an issue of
Host Not Responding and Needs Assistance on almost all Hyper-V Host Servers. But, When I move the Cluster to Node 1 off VMM, everything starts working and works undisturbed for days. What could be different
between two hosts that can cause such a behavior that causes connection loss and thus the above error in the console. How can I identify what is different in the first node from second node?

hi ATR,
Thanks for your prompt reply:
1 b. after you are in the workspace and are importing/editing/exporting? During Editing and add pictures and gopro files to the time line
2
1. Are you running the program as Administrator with an Internet connection?
No not running in admin mode.
Wifi connection is on
Do you have the latest version of QuickTime
Nieuw in QuickTime 7.7.6
installed on your computer along with Premiere Elements 11? yes
computer see attachment
2. Does the problem exist with or without the antivirus and firewall(s) disabled?
not tried yet , now avg 2015 virus scanner is on
3. Are you working with pen and tablet device instead of mouse?
No only laptop elan smart pad , on laptop.
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many
video cards/graphics cards does you computer use?
yes up to date only 1 card
5. Please describe your computer resources - processor, clock speed, installed RAM, available hard drive space?
Is the program installed to the default Local Disk C?
Installed on local disk drive C
See attachment for details

Similar Messages

Error in premiere elements 11 program is not responding and needs to shut down

hi ,
Please help just installed premiere elements version 11 and many time this message is shown, program is not active and must be shut down, please wait until program reacts.
How can i solve this issue?

hi ATR,
Thanks for your prompt reply:
1 b. after you are in the workspace and are importing/editing/exporting? During Editing and add pictures and gopro files to the time line
2
1. Are you running the program as Administrator with an Internet connection?
No not running in admin mode.
Wifi connection is on
Do you have the latest version of QuickTime
Nieuw in QuickTime 7.7.6
installed on your computer along with Premiere Elements 11? yes
computer see attachment
2. Does the problem exist with or without the antivirus and firewall(s) disabled?
not tried yet , now avg 2015 virus scanner is on
3. Are you working with pen and tablet device instead of mouse?
No only laptop elan smart pad , on laptop.
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many
video cards/graphics cards does you computer use?
yes up to date only 1 card
5. Please describe your computer resources - processor, clock speed, installed RAM, available hard drive space?
Is the program installed to the default Local Disk C?
Installed on local disk drive C
See attachment for details

Experiencing frequent "app not responding" and needing a hard reboot with ML 10.8.2

I am frequently needing to do a hard reboot (press the power button) to restart my MBPro8,2 with OS X 10.8.2 (12C60). The issue happens most commonly when browsing the web with either Safari 6.0.1 or Google Chrome 23.0.1271.64. This was a rare event with 10.6.8 to the point that I am considering "upgrading" my system back to SL for a more reponsive and, in particular, more stable OS. I am reaching the point of wanting out of all the ML bloat in favor of stability. Anyone else suffering these symptoms?

is this your MacBook:
TS4088- MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Take a copy of the article with you when you go for service. They need to run a SPECIAL diagnostic to decide whether you have this problem. Do not leave until they run the special diagnostic. The "overnight run" does not detect this problem.
If they confirm you have the problem, they will replace the graphics chip, which is part of the motherboard. be prepared to hand over your Mac for depot repair. (Your backups must be up-to-date).

Host Not Responding

A number of our standalone VM host servers have encountered this problem following an upgrade from SCVMM 2008 to 2012.
Not all of the servers have this issue (our server clusters for example are working fine.) We have been trying to find a working solution for this for awhile now without success. Deleting and re-adding the host servers in VMM has not worked either.
We have followed the instructions in the error that is presented (and that I have attached as a screenshot) but this has not helped either.
Any help that could be provided would be greatly appreciated.

Hello Wytecastl,
Can you follow the instructions on the following link about your issue?
http://blogs.technet.com/b/jonjor/archive/2008/12/29/how-to-troubleshoot-slow-bits-performance-hosts-not-responding-and-needs-attention-communication-issues.aspx
That should solve your problem or identify problem.
Sincerely,
Murat Demirkiran
If the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. www.scvmm2012.com (TR Language) Please note that I'm not a Microsoft Representative
or SpokesPerson.

I have the latest version but I am continually told that Firefox is running but not responding and that I need to close Firefox or restart my computer to clear the problem. Why is this happening?

I have the latest version but I am continually told that Firefox is running but not responding and that I need to close Firefox or restart my computer to clear the problem. Why is this happening?

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs
See also:
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding

Host not responding ESXi 5.5 and HA messages

hi guys
Lately I've been troubleshooting an issue with ping lost for my ESXi Servers. Network people tested all and they say is not networking.
These two servers are in a blade center - ibm - and they HS23, having Emulex and Broadcom NICs (Emulex OneConnect 10Gb NIC (be3), Broadcom NetXtreme II BCM5709S 1000Base-SX). Servers firmware is up to date and NICs and driver for NICs were updated yesterday and the issue is the same... continue ping lost
and today and I found repetitive "host not responding messages" like every 2 - 3 hours
and a lot of these too HA related as you can see below?
Any idea what logs do I have to check? for the ping lost and HA issue?
thanks a lot

Note: Discussion successfully moved from VMware ESXi 5 to Availability: HA & FT

Thunderbird not responding, and I need to know how to find out what version of Thunderbird I have?

I am running Windows 7 Home Premium, use Firefox, but not sure how to tell what version. I have Zone Alarm anti-virus / firewall, iolo System Mechanic, and run them both regularly. I also have a g-mail account, a folder labeled "Gmail" in Thunderbird, and basically, 100% of my Gmail messages come to my Thunderbird inbox. After Thunderbird is opened, the green "loading" circle is seen rotating, @ bottom lower left says "Downloading message", @ bottom lower right, the "progress bar" BARELY shows any green, and Thunderbird takes FOREVER to load. If I try to click on an e-mail, (most times I don't even have to do that), my screen turns a milky opaque white, and at top of page says "Thunderbird"(not responding). Usually, I have to just leave the laptop, and return in 30 minutes or so to start opening my e-mails. Sometimes, it is ready for me to begin reading e-mail, and other times, it is STILL not responding, and I must continue to wait. Using cntrl / alt /del...task manager, scroll to Thunderbird, and click "end process" does no good; restarting, OR shut down / restart also does no good.

Typing '''Thunderbird Compact Folders''' into Google search will get you here.
http://kb.mozillazine.org/Thunderbird_:_Tips_:_Compacting_Folders

TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding

TACACS+ configured on router and router is in ACS. I can ping the ACS but the router cannot establish a connection to authenticate users.
aaa group server tacacs+ hq_acs-1
server 10.20.17.2
ip tacacs source-interface GigabitEthernet0/0
aaa authentication login default group tacacs+ local
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 10 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting nested
aaa accounting update newinfo periodic 60
aaa accounting auth-proxy default start-stop group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa accounting resource default start-stop group tacacs+
BigTree_3945#sh ip int br
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 10.4.3.1 YES NVRAM down down
GigabitEthernet0/1 10.12.10.26 YES NVRAM up up
Serial0/2/0 unassigned YES NVRAM down down
Serial0/2/0.602 10.12.15.10 YES NVRAM down down
Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
BigTree_3945#
AAA Client IP Address
10.4.3.* 10.12.15.10
Key
Network Device Group
Test
NJT
AccessLink
(Not Assigned)
Authenticate Using
TACACS+ (Cisco IOS)
RADIUS (Cisco Aironet)
RADIUS (Cisco BBSM)
RADIUS (Cisco IOS/PIX)
RADIUS (Cisco VPN 3000)
RADIUS (Cisco VPN 5000)
RADIUS (IETF)
RADIUS (Ascend)
RADIUS (Juniper)
RADIUS (Nortel)
RADIUS (iPass)
Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
The 10.12.10.* range is listed under the HQ site.
Your help is greatly appreciated.

You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
Are you using VRFs?
What version of IOS?

My finder is not responding and I have the pinwheel of death?

My mac is not responding and I have the pinwheel of death

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

For the last two days, firefox has been freezing or Not Responding and giving error message

every 30 seconds or so firefox tells me it is not responding. and once it comes back it gives me the following error message.
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: http://cdn4.specificclick.net/img/?ag=1&pb=9788&pg=293059886053054629&us=IuOJnv_awGu5HD&nwk=1&rnd=53585:3534
I did install a java update, don't know if this is related.

It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

My firefox keeps sayin Not Responding and frezzes on me every 5-15 mintues

I have windows7 and my Firefox keeps freezing and saying Not Responding and is out for a minute or two, it does this frequently (5-15 mins), and i dont get any crazh reports and it doesnt close the window on me..

I have 4 computers in my home office and I also have a laptop. Firefox hangs on all 4 of these computers under windows, and on my laptop, and even under linux. Flash simply doesn't work on Firefox. This has been true on all operating systems from windows XP to windows 7. I haven't tried windows 8, but I'd be surprised if it works there. It performs poorly on ubuntu 12.04 as well.
I usually see the hanging behavior within about 10 minutes of starting firefox. Visiting utube or other flash heavy sites exacerbates the problem.
I am always astonished when mozilla claims that it's only a small minority of users who see the hanging behavior. I have never seen firefox be stable since they went to the rapid update cycle. For this reason I now exclusively use chrome, even though chrome's UI is pathetic, and I hate chrome actually.
Unfortunately Firefox is unusable. If Firefox were so bug free, then why has it's market share plummeted over the last couple of years? Frankly they need to fix the bugs for all platforms prior to another useless update. Fast light and robust would bring back the fanbase.
Here is a little you tube video that causes an instant hang for me.
http://www.youtube.com/watch?v=3wiG2Fa2dlQ

Firefox 4.0 freezes, crashes, closes, changes screens, does not respond, and runs 8X SLOWER than 3.6.

Firefox 4.0 is the WORST browser I have ever seen. It freezes, crashes, closes, changes screens, does not respond, and runs 8X SLOWER than 3.6. Tasks I used to do in 30 minutes, now takes me 40 minutes or more. I went back to 3.6 and immediately had a tremendous improvement.
Mozilla needs to get rid of this load of lies about a new crap program, and go back to the 3.6 version. Version 4.0 is WORST than any other program I have ever seen.

The slow / hesitant scrolling problem seems to be an artifact of the database Firefox uses to keep track of where you go, what you do, etc. It uses sqlite databases which get fragmented over time.
There are several fixes:
Some are add-ons and work internally, such as Vacuum Places (search the addons for it).
Some are external. Speedyfox is one I just tried, and found to work quite well. I think it did a better job than Vacuum Places, but requires Firefox to be shut down before it can work properly.
Find Speedyfox using a web search.

Mozilla constintly is not responding , and delaying when im typing. ever since i downloaded this new version.

it constantly is not responding , and delaying when im typing. ever since i downloaded this new version.

The Firefox pop-up blocker is usually very effective for blocking pop-ups generated by websites, but it sounds like you may have picked up some Malware that is generating those pop-ups from you own PC.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html

My aux input does not work. When i put in my headphones my mac does not respond, and my speakers just continues as normal. What to do?

My aux input does not work. When i put in my headphones my mac does not respond, and my speakers just continues as normal. What to do?

I had the same issue. Initially i thought i need to take it to apple for replacing the aux port. But luckily I was able to fix it by resetting the PRAM . To reset the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
You can try this before you take to apple store. It may work if you are lucky. Good luck

Cannot remotely program DVR from browser and iPad, get "not responding" and "bad gateway"

Like others I've seen here, my remote DVR programming has disappeared, it used to work just fine from both the web and my iPad. I now get both "not responding" and "bad gateway" messages. I've tried everything I've seen suggested, including using the in-home agent for both "auto-fix common DVR issues" and "set top box auto correction", and rebooting the FiOS router. The self-diagnostics are all green, and it says that listener 1 is running. However, I still have the problems. From what I've read, there's a remapping process that can be run in the Verizon office that fixes the problem. Can this be done for me? Thanks!
Solved!
Go to Solution.

Hello Skiprules and Nubby122,
I have sent you both private messages so we can assist in getting the issue resolved.
Mike_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan.

Host Not Responding and Needs Assistance

Similar Messages

Maybe you are looking for