Host not responding ESXi 5.5 and HA messages

hi guys
Lately I've been troubleshooting an issue with ping lost for my ESXi Servers. Network people tested all and they say is not networking.
These two servers are in a blade center - ibm - and they HS23, having Emulex and Broadcom NICs (Emulex OneConnect 10Gb NIC (be3), Broadcom NetXtreme II BCM5709S 1000Base-SX). Servers firmware is up to date and NICs and driver for NICs were updated yesterday and the issue is the same... continue ping lost
and today and I found repetitive "host not responding messages" like every 2 - 3 hours
and a lot of these too HA related as you can see below?
Any idea what logs do I have to check? for the ping lost and HA issue?
thanks a lot

Note: Discussion successfully moved from VMware ESXi 5 to Availability: HA & FT

Similar Messages

Host Not Responding and Needs Assistance

I have a VMM 2012 R2 Cluster based on two nodes. Both nodes have similar hardware configuration. When I move the VMM Cluster to Node 2, I face an issue of
Host Not Responding and Needs Assistance on almost all Hyper-V Host Servers. But, When I move the Cluster to Node 1 off VMM, everything starts working and works undisturbed for days. What could be different
between two hosts that can cause such a behavior that causes connection loss and thus the above error in the console. How can I identify what is different in the first node from second node?

hi ATR,
Thanks for your prompt reply:
1 b. after you are in the workspace and are importing/editing/exporting? During Editing and add pictures and gopro files to the time line
2
1. Are you running the program as Administrator with an Internet connection?
No not running in admin mode.
Wifi connection is on
Do you have the latest version of QuickTime
Nieuw in QuickTime 7.7.6
installed on your computer along with Premiere Elements 11? yes
computer see attachment
2. Does the problem exist with or without the antivirus and firewall(s) disabled?
not tried yet , now avg 2015 virus scanner is on
3. Are you working with pen and tablet device instead of mouse?
No only laptop elan smart pad , on laptop.
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many
video cards/graphics cards does you computer use?
yes up to date only 1 card
5. Please describe your computer resources - processor, clock speed, installed RAM, available hard drive space?
Is the program installed to the default Local Disk C?
Installed on local disk drive C
See attachment for details

TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding

TACACS+ configured on router and router is in ACS. I can ping the ACS but the router cannot establish a connection to authenticate users.
aaa group server tacacs+ hq_acs-1
server 10.20.17.2
ip tacacs source-interface GigabitEthernet0/0
aaa authentication login default group tacacs+ local
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 10 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting nested
aaa accounting update newinfo periodic 60
aaa accounting auth-proxy default start-stop group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa accounting resource default start-stop group tacacs+
BigTree_3945#sh ip int br
Interface                  IP-Address      OK? Method Status                Protocol
GigabitEthernet0/0         10.4.3.1        YES NVRAM down                  down
GigabitEthernet0/1         10.12.10.26     YES NVRAM up                    up
Serial0/2/0                unassigned      YES NVRAM down                  down
Serial0/2/0.602            10.12.15.10     YES NVRAM down                  down
Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
BigTree_3945#
AAA Client IP Address
10.4.3.* 10.12.15.10
Key
Network Device Group
Test
NJT
AccessLink
(Not Assigned)
Authenticate Using
TACACS+ (Cisco IOS)
RADIUS (Cisco Aironet)
RADIUS (Cisco BBSM)
RADIUS (Cisco IOS/PIX)
RADIUS (Cisco VPN 3000)
RADIUS (Cisco VPN 5000)
RADIUS (IETF)
RADIUS (Ascend)
RADIUS (Juniper)
RADIUS (Nortel)
RADIUS (iPass)
Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
The 10.12.10.* range is listed under the HQ site.
Your help is greatly appreciated.

You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
Are you using VRFs?
What version of IOS?

Host Not Responding

A number of our standalone VM host servers have encountered this problem following an upgrade from SCVMM 2008 to 2012.
Not all of the servers have this issue (our server clusters for example are working fine.) We have been trying to find a working solution for this for awhile now without success. Deleting and re-adding the host servers in VMM has not worked either.
We have followed the instructions in the error that is presented (and that I have attached as a screenshot) but this has not helped either.
Any help that could be provided would be greatly appreciated.

Hello Wytecastl,
Can you follow the instructions on the following link about your issue?
http://blogs.technet.com/b/jonjor/archive/2008/12/29/how-to-troubleshoot-slow-bits-performance-hosts-not-responding-and-needs-attention-communication-issues.aspx
That should solve your problem or identify problem.
Sincerely,
Murat Demirkiran
If the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. www.scvmm2012.com (TR Language) Please note that I'm not a Microsoft Representative
or SpokesPerson.

When setting up my hubby's new phone to itunes, I have somehow merged the 2 itunes accounts together and now itunes is not responding to my phone and all of my info has synced onto my hubby's phone wiping all of his info and adding mine...Help!!

I have an Itunes account already set up, when setting up my hubby's new phone to itunes, I have somehow merged the 2 itunes accounts together and now itunes is not responding to my phone and all of my info has synced onto my hubby's phone wiping all of his info and adding mine...Help!!

If her data was not backed up or synced to something, it's gone. Sorry.

Application, once built, shows "Not Responding" in the toolbar, and it doesn't go away

If you have an application that is running with some kind of timeout, (My application will send a message, and wait for a user definable period of time for a reply). If this tine is over 5 seconds, and the user clicks on the application, the app sets its status to "(Not Responding)". This is mirrored on the toolbar.
Once the application begins responding again, the title bar of the app changes back to an active state, although the representation of the app on the tool bar stays in a "(Not Responding)" state.
I have attempted to stop the user click having an effect by setting the cursor to busy and setting the "Click Disable" to TRUE, but this does not help.
Any ideas how to get round this one? Or is it a bug?
Cheers, Alec

I must not be explaing myself propperly.
Every application that is open has an instance in the task bar
As you can see here, I am running outlook, labview, firefox and MSN, but don't tell my boss
Somtimes, when windows things an application has crashed it will place the phrase "(Not Responding)" next to it's name in the task bar. It will also place the word "(Not Responding)" In the title bar for the application.
I have written a program that calls a .dll. The function of this .dll is to read incomming data up the RS-232 socket of my PC. I can set a timeout on this, lets say I set it to 1 minute.
The application is running, I call the .dll to read incoming data, then I don't produce any incoming data. The application will wait, up to 60 seconds for some data, but in the mean time, Windows thinks the LabVIEW executable file has crashed, so places the word "(Not responding)" in the taskbar AND in the title bar. At this point I send my data up the 232, the data is received and displayed by the application. At this point Windows forgives LabVIEW and the "(Not Responding)" status is revolked. This phrase is then removed from the title bar, but IS NOT removed from the task bar.
Does anyone know if we have control over this, or should I report it as a bug to National Instruments?
Many thanks guys,
Cheers, Alec

Photoshop CS6 is not responding when leaving PS and coming back again

A weired problem: My new installation of Photoshop CS6 (OS X Mavericks on a new MBP) is not responding when leaving PS and coming back again.
Example: i open a new file in PS - then i click on the desktop - when i go back to PS again, it is not responding to any click on any window (except for the menu bar).
I can solve the problem when i try going back several times or when i go back to PS via the icon in the dock.
But it is still very annoying in a quick workflow.
I would appreciate any idea what i can check more, cause i tried everything and i can’t find this issue on the web…
Thanks…

Problem solved… The troublemaker was the Trackball Works Driver for Kensington trackballs / Expert Mouses…
I’m now using a generic driver for USB devices and everything is fine.

HT1483 my iPod is not responding. It is giving a message low battery, please wait and is displaying the apple support link

my ipod is not responding. It is giving a message pleases wait low battery and showing me a link to apple support

Hey,
Welcome to Apple Support Communities.
Well leave it for few minutes then try plugging it to the charger, if that does not work. Try restoring it from revious backup. This will change the software and hopefully earase the error. If that did not fix it i guess you need to take it to the Store for a check.
I really hope this helps you. Let me know if it does. If not feel free to give me a shout. Best of luck.

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Hi cruzsanta03,
Can you please let us know the following:
- Operating System;
- Complete version of Acrobat installed;
- Experiencing this issue with a particular file or all PDF files;
- Experiencing this issue while performing a particular task or with any task;
- Files are saved on the local machine or on a share drive;
- Launch Acrobat in Safe Mode and then check the issue. Hold 'Shift' key and launch Acrobat, and then check the issue.

Firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites

firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites. Firefox 3. (the previous incarnation of firefox) did not have such problems - this has started since "upgrading to 4.0.1 - I want to change back to the previous Firefox since this is a serious problem - need specific instructions on how to go back to the old Firefox

Do you have multiple keyboard layouts installed?
It is possible that you have switched the keyboard layout by accident.
* http://support.microsoft.com/kb/258824 - How to change your keyboard layout
Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
* Make sure that you have the Language bar visible on the Windows Taskbar
* You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
* Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
* You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application

Hello The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when I try t

hello
The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when I try to open it is no use. OS Y 10.10.2 (14C1514)

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Restart the computer. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. Any custom stationery that you created may be lost. Ask for instructions if you want to preserve that data. You can then delete the folder you moved and close the Finder window.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

TS2446 I can't buy on hay day game he told me contact iTunes support to complete this transaction after that told me the billing server not respond try again later and the other game same but I can buy games from the AppStore ? Please help me

I can't buy on hay day game he told me contact iTunes support to complete this transaction after that told me the billing server not respond try again later and the other game same but I can buy games from the AppStore ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

My MacBook not responding with all browsers and some applications!!!

Hi !!!
First sorry my english...
My apple not respond i i need force to quiet... (Safari, firefox, chrome, some applications like players)
I a few days my mac don't works like before i try to use chrome safari fireworks and is always the same in youtube or any website with flash content, and some applications too the same problem not respond, i was unistall and reinstall a lot o softwares i use clean app to remove the app complete and reinstall but don't works ... What i do? whatis this? My mac is all updated i use all lastest versions ... I don't understand why... Somebody can help me...
Thank you for all news...
bye!

Hi,
Click once on the hard drive icon. Then hold down the  key and tap i (  + i ).
Capacity XX
Available XX
Used XX
Post back with your values of XX.
Regards.
Ian.

Failure to connect - host not responding

I've been video conferencing regularly with my mother in Fla with no problems. We both have macs with mac accounts. I recently tried to initiate a video conference with my in-laws in N.C. and it wouldnt work. They have a PC with an AIM account. Thier AV icon appears active on my buddy list. I can invite them to a video conference, they see the invite and accept, I can see they've accepted but then the connection fails saying that I (the host) did not respond???? How can that be, since I invited them. By the way, this is the same error I get when I try contacting another friend with a PC and AIM account. Any suggestions? Your assistance would be deeply appreciated.
...by the way, I'm in China but as I said this hasnt effected my ability to video conference with FLA.
Thanks again -al

HI Al,
Welcome to the Apple Discussion Pages.
The minimum connection speed needed by iChat to chat to other iChat users is now listed as 100kbps
In iChat 2 this figure was the realistic figure for Video chats.
It was known however that iChat to PC chats did better if the connection speed was at least 150kbps (at both ends)
What do you have ?
http://www.adslguide.org.uk/tools/speedtest.asp Test here.
Ralph

I am using a USB keyboard and everytime I wake the iMac from sleep the keyboard will not respond unless I unplug and replug the keyboard. I am using a mid-2010 iMac with OSX 10.6. Any help would be appreciated.

I am currently using a USB keyboard (PC Model) and everytime I wake the computer from sleep the keyboard no longer responds unless I unplug and replug it. The USB mouse I am using works fine with no issues and I have already gone through the prompt to identify the keyboard in the settings. If anyone know of a setting I can use to permenantly enable the keyboard so I no longer have to unplug and replug it that would be appreciated.
Thank you.

Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

Host not responding ESXi 5.5 and HA messages

Similar Messages

Maybe you are looking for