Host Not Responding

A number of our standalone VM host servers have encountered this problem following an upgrade from SCVMM 2008 to 2012.
Not all of the servers have this issue (our server clusters for example are working fine.) We have been trying to find a working solution for this for awhile now without success. Deleting and re-adding the host servers in VMM has not worked either.
We have followed the instructions in the error that is presented (and that I have attached as a screenshot) but this has not helped either.
Any help that could be provided would be greatly appreciated.

Hello Wytecastl,
Can you follow the instructions on the following link about your issue?
http://blogs.technet.com/b/jonjor/archive/2008/12/29/how-to-troubleshoot-slow-bits-performance-hosts-not-responding-and-needs-attention-communication-issues.aspx
That should solve your problem or identify problem.
Sincerely,
Murat Demirkiran
If the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. www.scvmm2012.com (TR Language) Please note that I'm not a Microsoft Representative
or SpokesPerson.

Similar Messages

  • TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding

     TACACS+ configured on router and router is in ACS.  I can ping the ACS but the router cannot establish a connection to authenticate users.
    aaa group server tacacs+ hq_acs-1
    server 10.20.17.2
    ip tacacs source-interface GigabitEthernet0/0
    aaa authentication login default group tacacs+ local
    aaa authorization config-commands
    aaa authorization exec default group tacacs+ local
    aaa authorization commands 10 default group tacacs+ local
    aaa authorization commands 15 default group tacacs+ local
    aaa accounting nested
    aaa accounting update newinfo periodic 60
    aaa accounting auth-proxy default start-stop group tacacs+
    aaa accounting exec default start-stop group tacacs+
    aaa accounting commands 15 default start-stop group tacacs+
    aaa accounting network default start-stop group tacacs+
    aaa accounting connection default start-stop group tacacs+
    aaa accounting system default start-stop group tacacs+
    aaa accounting resource default start-stop group tacacs+
    BigTree_3945#sh ip int br
    Interface                  IP-Address      OK? Method Status                Protocol
    GigabitEthernet0/0         10.4.3.1        YES NVRAM  down                  down
    GigabitEthernet0/1         10.12.10.26     YES NVRAM  up                    up 
    Serial0/2/0                unassigned      YES NVRAM  down                  down
    Serial0/2/0.602            10.12.15.10     YES NVRAM  down                  down
    Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
    Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
    Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
    Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
    Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
    Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
    Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
    Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
    Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
    Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
    Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
    Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
    Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
    Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
    Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
    Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
    Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
    Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
    Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
    Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
    Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
    Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
    Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
    Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
    Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
    Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
    Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
    Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
    Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
    Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
    Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
    Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
    Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
    Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
    Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
    Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
    Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
    BigTree_3945#
    AAA Client IP Address
    10.4.3.* 10.12.15.10
    Key
    Network Device Group
    Test    
    NJT    
    AccessLink    
    (Not Assigned)    
    Authenticate Using
    TACACS+ (Cisco IOS)    
    RADIUS (Cisco Aironet)    
    RADIUS (Cisco BBSM)    
    RADIUS (Cisco IOS/PIX)    
    RADIUS (Cisco VPN 3000)    
    RADIUS (Cisco VPN 5000)    
    RADIUS (IETF)    
    RADIUS (Ascend)    
    RADIUS (Juniper)    
    RADIUS (Nortel)    
    RADIUS (iPass)    
    Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
    The 10.12.10.* range is listed under the HQ site.
    Your help is greatly appreciated.

    You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
    What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
    Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
    Are you using VRFs?
    What version of IOS?

  • Host not responding ESXi 5.5 and HA messages

    hi guys
    Lately I've been troubleshooting an issue with ping lost for my ESXi Servers. Network people tested all and they say is not networking.
    These two servers are in a blade center - ibm - and they HS23, having Emulex and Broadcom NICs (Emulex OneConnect 10Gb NIC (be3), Broadcom NetXtreme II BCM5709S 1000Base-SX). Servers firmware is up to date and NICs and driver for NICs were updated yesterday and the issue is the same... continue ping lost
    and today and I found repetitive "host not responding messages" like every 2 - 3 hours
    and a lot of these too HA related as you can see below?
    Any idea what logs do I have to check? for the ping lost and HA issue?
    thanks a lot

    Note: Discussion successfully moved from VMware ESXi 5 to Availability: HA & FT

  • Host Not Responding and Needs Assistance

    I have a VMM 2012 R2 Cluster based on two nodes.  Both nodes have similar hardware configuration.  When I move the VMM Cluster to Node 2, I face an issue of
    Host Not Responding and Needs Assistance on almost all Hyper-V Host Servers.  But, When I move the Cluster to Node 1 off VMM, everything starts working and works undisturbed for days.  What could be different
    between two hosts that can cause such a behavior that causes connection loss and thus the above error in the console.  How can I identify what is different in the first node from second node? 

    hi ATR,
    Thanks for your prompt reply:
    1 b. after you are in the workspace and are importing/editing/exporting? During Editing and add pictures and gopro files to the time line
    2
    1. Are you running the program as Administrator with an Internet connection?
    No not running in admin mode.
    Wifi connection is on
    Do you have the latest version of QuickTime
    Nieuw in QuickTime 7.7.6
    installed on your computer along with Premiere Elements 11? yes
    computer see attachment
    2. Does the problem exist with or without the antivirus and firewall(s) disabled?
    not tried yet , now avg 2015 virus scanner is on
    3. Are you working with pen and tablet device instead of mouse?
    No only laptop elan smart pad , on laptop.
    4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many
    video cards/graphics cards does you computer use?
    yes up to date only 1 card
    5. Please describe your computer resources - processor, clock speed, installed RAM, available hard drive space?
    Is the program installed to the default Local Disk C?
    Installed on local disk drive C
    See attachment for details

  • Failure to connect - host not responding

    I've been video conferencing regularly with my mother in Fla with no problems. We both have macs with mac accounts. I recently tried to initiate a video conference with my in-laws in N.C. and it wouldnt work. They have a PC with an AIM account. Thier AV icon appears active on my buddy list. I can invite them to a video conference, they see the invite and accept, I can see they've accepted but then the connection fails saying that I (the host) did not respond???? How can that be, since I invited them. By the way, this is the same error I get when I try contacting another friend with a PC and AIM account. Any suggestions? Your assistance would be deeply appreciated.
    ...by the way, I'm in China but as I said this hasnt effected my ability to video conference with FLA.
    Thanks again -al

    HI Al,
    Welcome to the Apple Discussion Pages.
    The minimum connection speed needed by iChat to chat to other iChat users is now listed as 100kbps
    In iChat 2 this figure was the realistic figure for Video chats.
    It was known however that iChat to PC chats did better if the connection speed was at least 150kbps (at both ends)
    What do you have ?
    http://www.adslguide.org.uk/tools/speedtest.asp Test here.
    Ralph

  • SAP Router - Host did not respond 8 times

    Guys,
    I'm able to test OSS connection successfully in SM59. But in service connections, whenever i open connections, the connection failing to open with the "Host did not respond 8 times " error before changing to Cancel. Any suggestions please?

    There was a little glitch in the saprouttab file, which i fixed. But interesting to note that it didn't clear the error. I keep having the same error, but SAP was able to connect inspite of that. As i read elsewhere, often times this error is misleading. anyway, thanks.

  • Host did not respond error in connecting the SAP Router from SERVICE PLACE

    Dear Sir,
    We renew the Router Certificate by October 2008.  We are using broadband connection in our office with firewall (ISA) .
    When we try to connect the sap router from SAP Service Market Place, It is connected and after some time, status is changing to Host did not respond due to timeout.
    We checked the SAP Router Tab File also. It is correct.  Guide us to solve this issue
    With Regards
    K.Natarajan

    Hi
    This type of error occurs maximum,only when there is no proper connection between the systems.So,my suggestion is to check with the connection between the systems with the help of Basis person.
    regards
    krishna

  • SAPRouter Status : Host did not respond

    Hi,
    When I try to open service connections some times I get it connected.
    But some times I get this message( Host did not respond ) with a warning sign on it.
    Please suggest what could be the problem?
    And why it is just a warning?
    Thanks & Regards
    Mrutyunjay

    Hi Juan / Wolfgang,
    Very much thankful for your time.
    Sorry for delayed response.
    I get connected to the sapserv2.. for some time the status remains connected.. and when i refresh it after some time it changes to "Host did not respond" ...
    If it is timeout it should not connect at all..
    Even though the status is Host did not respond still SAP is able to connect and work.
    Wolfgang : I will go through the note and will come back to you.
    Thanks & Regards
    Mrutyunjay

  • Saprouter - Host did not respond times

    Hello,
    We have configured the saprouter with a VPN, the test connection in SM59 is OK.
    When I try to start  "R/3 Support" in SAP Support Portal, the SAP Service Connector gives me the message: "The service connection has been opened successfully." but SAPRouter status does not get "connect", it keeps on "Host did not respond x times".
    How can I find the problem? If the SAP Connector shows me "The service connection has been opened successfully."?
    Regards

    Hi Richard
    1.  Is it new SAProuter installed or already working one?
    2. In which OS? could you refer the SAP links
    Installing the SAProuter - SAProuter - SAP Library
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c06c8846-c160-2d10-d18e-d9961e9c7219?QuickLink=index&…
    BR
    SS

  • Java.sql.SQLException: Io exception: A remote host did not respond within t

    Hi All,
    I am using SUN ONE Webserver 6 on AIX with Oracle 8i. Every now and then I get this error
    java.sql.SQLException: Io exception: A remote host did not respond within the timeout period.
    I am not able to unterstand this. Some one please help...
    Thanks

    Are you able to connect to the database server from the same machine where you are running SJS Web Server using JDBC?
    Are the driver and the Database using compatible drivers?
    Does it normally work? Is the error accompanied by other symptoms like application failure or unusually slow responses?

  • "Update server not responding" when trying to update Acrobat 9 Pro

    I just installed Acrobat 9 Pro on my desktop computer and on my laptop. I was able to download and install the latest updates to the copy on my desktop computer (so that it is now version 9.3.0), using Help>Check for Updates.
    When I try the same command on my laptop, I get and error message that states "The update server is not responding, which means it may be offline at the moment, or the Internet or firlewall settings may be incorrect. Please try again later." I tried several times yesterday and today with the same error. The message pops up immediatley; it doesn't even seem to actually try to connect.
    I disabled my firewall and antivirus software and still get the same result. I uninstalled then reinstalled Acrobat and still get the same result.
    I looked online at Adobe.com to see about downloading and installing the updates manually, but it's difficult for me to tell which updates I need. Some are for other languages and some are for 64-bit but I have Windows 7 32-bit.
    A call to tech support was no help. The agent seemed to think because I installed verison 9.0 that I only needed the one English update listed on the download page under 9.0, and not any of the later updates. . . And he said that Adobe recommends manually installing updates from Adobe.com rather than using the Check for Updates command (?!).
    Anyway, does anyone know what might be causing this problem with the adobe updater? Maybe I need to reinstall the updater (where do I find it?).
    OR
    Can someone tell me which of the updates listed on the Acrobat dowload page I should manually install to bring my product up to date?
    [Running Windows 7 32-bit on both machines]
    Thanks.

    Hi,
    Which version of Acrobat do you have ?
    (Launch Acrobat and Go to Acrobat->About Adobe Acrobat menu item and check the version )
    Also, can you ping following urls ?
    armmf.adobe.com
    armdl.adobe.com
    ardownload.adobe.com
    Are these urls reachable ?
    Also, you can check the contents of host file /etc/defaults/host to see that none of the ips are redirected.
    One more thing that you could try:
    If you have firewall on, could you please disable the firewall and then try the update. Does it works now ?

  • Computer Freezes - Finder (not responding)

    So I've tried as many fixes and solutions that I could find and nothing is correcting what's happening. Even after deleting my hard drive and doing a clean install of Mavericks from a usb drive. I can use the computer for maybe a 1/2 hour and then it completely freezes up and in Task Manager it says the Finder is not responding. I can work in Safe boot mode fine, which makes me thing its a hardware issue. But I've done a hardware test (restart, hold "D", do test) and it says there is no problems.
      I heavily depend on my computer for work so this  very frustrating. Any help would be appreciated. Here is my latest Etrecheck file:
    Hardware Information:
              MacBook Pro (Retina, Mid 2012)
              MacBook Pro - model: MacBookPro10,1
              1 2.6 GHz Intel Core i7 CPU: 4 cores
              16 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
              NVIDIA GeForce GT 650M - VRAM: 1024 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:4:35
    Disk Information:
              APPLE SSD SM512E disk0 : (500.28 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.42 GB (470 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. FaceTime HD Camera (Built-in)
              C-Media Electronics Inc.       USB PnP Sound Device
              Focusrite A.E. Ltd Impulse
              Newer Technology, Inc. miniStack v3 500.11 GB
                        EFI (disk1s1) <not mounted>: 209.7 MB
                        Newertech miniStack V3 (disk1s2) /Volumes/Newertech miniStack V3: 499.76 GB (181.6 GB free)
              iLok iLok
    FireWire Information:
              Focusrite LIQUID_SAFFIRE_56 400mbit - 400mbit max
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
                        Belkin International, Inc. Express Dock
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [not loaded] tc.tctechnologies.Saffire.plist
    Launch Agents:
    User Launch Agents:
    User Login Items:
              iTunesHelper
    3rd Party Preference Panes:
              None
    Internet Plug-ins:
              Default Browser.plugin
              QuickTime Plugin.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   5%          com.apple.WebKit.WebContent
                   1%          WindowServer
                   1%          EtreCheck
                   0%          fontd
                   0%          hidd
                   0%          coreservicesd
                   0%          notifyd
                   0%          opendirectoryd
                   0%          Dock
                   0%          imagent
    Top Processes by Memory:
              213 MB             com.apple.WebKit.WebContent
              197 MB             Safari
              138 MB             WindowServer
              131 MB             com.apple.IconServicesAgent
              98 MB              Finder
              82 MB              Dock
              66 MB              soagent
              66 MB              CalendarAgent
              49 MB              com.apple.dock.extra
              49 MB              ubd
    Virtual Memory Statistics:
              12.76 GB           Free RAM
              1.94 GB            Active RAM
              362 MB             Inactive RAM
              971 MB             Wired RAM
              174 MB             Page-ins
              0 B                Page-outs

    tctechnologies.Saffire.plist
    tctechnologies.Saffire.plistFireWire Information:
              Focusrite LIQUID_SAFFIRE_56 400mbit - 400mbit max
    It may be the Saffire hardware causing the problem not to mention the Saffire.plist.
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    /Library/LaunchDaemons
    Click Go then move the Saffire.plist file to the Trash.
    Then restart your Mac.

  • AMD A6-5400k - CPU1: Not Responding

    Hi fellas,
    I got a new CPU for my maschine, which runs on ARCH-x86_64 Kernel 3.6.10. So far everything went fine but one thing:
    At boot, only of the two cores is recognized. This is only the case in Arch, both BIOS and Windows show both Cores. I rebuilt my initramfs and reinstalled linux, but none helped.
    I realize, there are several topics around the www and this board, but none of them helped me in my case.
    I tried some things, like booting the LTS-Kernel.
    Any ideas how I can solve this issue?
    I got the outputs of dmesg (system boot):
    I think the relevant Lines are around 0.17000.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0.46-1-lts (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP Fri Oct 12 23:52:43 CEST 2012
    [ 0.000000] Command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000009d575000 (usable)
    [ 0.000000] BIOS-e820: 000000009d575000 - 000000009d856000 (reserved)
    [ 0.000000] BIOS-e820: 000000009d856000 - 000000009dbae000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000009dbae000 - 000000009e9d3000 (reserved)
    [ 0.000000] BIOS-e820: 000000009e9d3000 - 000000009e9d4000 (usable)
    [ 0.000000] BIOS-e820: 000000009e9d4000 - 000000009ebda000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000009ebda000 - 000000009f04c000 (usable)
    [ 0.000000] BIOS-e820: 000000009f04c000 - 000000009f7dd000 (reserved)
    [ 0.000000] BIOS-e820: 000000009f7dd000 - 000000009f800000 (usable)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100001000 - 000000043f000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-D3H, BIOS F1 10/09/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-D1FFF write-protect
    [ 0.000000] D2000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
    [ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000043f000000 aka 17392M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 000000009f800000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0x9f800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-000000009f800000
    [ 0.000000] 0000000000 - 0080000000 page 1G
    [ 0.000000] 0080000000 - 009f800000 page 2M
    [ 0.000000] kernel direct mapping tables up to 9f800000 @ 1fffe000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000043f000000
    [ 0.000000] 0100000000 - 0400000000 page 1G
    [ 0.000000] 0400000000 - 043f000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 43f000000 @ 9f7fe000-9f800000
    [ 0.000000] RAMDISK: 79bca000 - 7ffff000
    [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 000000009db97080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 000000009db9cf90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
    [ 0.000000] ACPI: DSDT 000000009db97190 05DFE (v02 ALASKA A M I 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 000000009dba6d80 00040
    [ 0.000000] ACPI: APIC 000000009db9d088 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 000000009db9d100 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 000000009db9d148 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
    [ 0.000000] ACPI: HPET 000000009db9d188 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
    [ 0.000000] ACPI: IFEU 000000009db9d1c0 00042 (v01 ALASKA A M I 01072009 00000000)
    [ 0.000000] ACPI: BGRT 000000009db9d208 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 000000009db9d240 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 000000009db9d8f8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: IVRS 000000009db9ddb0 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
    [ 0.000000] ACPI: CRAT 000000009db9de20 001F8 (v01 AMD AGESA 00000001 AMD 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000043f000000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000043f000000
    [ 0.000000] NODE_DATA [000000043effb000 - 000000043effffff]
    [ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042ee00000-ffff88043c7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0043f000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[6] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0009d575
    [ 0.000000] 0: 0x0009e9d3 -> 0x0009e9d4
    [ 0.000000] 0: 0x0009ebda -> 0x0009f04c
    [ 0.000000] 0: 0x0009f7dd -> 0x0009f800
    [ 0.000000] 0: 0x00100001 -> 0x0043f000
    [ 0.000000] On node 0 totalpages: 4049304
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 627267 pages, LIFO batch:31
    [ 0.000000] Normal zone: 46536 pages used for memmap
    [ 0.000000] Normal zone: 3357239 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 000000009d575000 - 000000009d856000
    [ 0.000000] PM: Registered nosave memory: 000000009d856000 - 000000009dbae000
    [ 0.000000] PM: Registered nosave memory: 000000009dbae000 - 000000009e9d3000
    [ 0.000000] PM: Registered nosave memory: 000000009e9d4000 - 000000009ebda000
    [ 0.000000] PM: Registered nosave memory: 000000009f04c000 - 000000009f7dd000
    [ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
    [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
    [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
    [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
    [ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
    [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
    [ 0.000000] Allocating PCI resources starting at 9f800000 (gap: 9f800000:5f400000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88043ec00000 s79360 r8192 d23040 u524288
    [ 0.000000] pcpu-alloc: s79360 r8192 d23040 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3988427
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 15793100k/17809408k available (4239k kernel code, 1612192k absent, 404116k reserved, 5184k data, 732k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 130023424 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: Unable to calibrate against PIT
    [ 0.000000] TSC: using HPET reference calibration
    [ 0.000000] Detected 3593.482 MHz processor.
    [ 0.030003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.96 BogoMIPS (lpj=35934820)
    [ 0.030067] pid_max: default: 32768 minimum: 301
    [ 0.030186] Security Framework initialized
    [ 0.030219] AppArmor: AppArmor disabled by boot time parameter
    [ 0.031478] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.038170] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.042321] Mount-cache hash table entries: 256
    [ 0.042958] Initializing cgroup subsys cpuacct
    [ 0.043012] Initializing cgroup subsys memory
    [ 0.043055] Initializing cgroup subsys devices
    [ 0.043086] Initializing cgroup subsys freezer
    [ 0.043118] Initializing cgroup subsys net_cls
    [ 0.043149] Initializing cgroup subsys blkio
    [ 0.043215] tseg: 009f800000
    [ 0.043216] CPU: Physical Processor ID: 0
    [ 0.043248] CPU: Processor Core ID: 0
    [ 0.043279] mce: CPU supports 7 MCE banks
    [ 0.044338] ACPI: Core revision 20110413
    [ 0.050017] ftrace: allocating 16878 entries in 67 pages
    [ 0.060590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.160953] CPU0: AMD A6-5400K APU with Radeon(tm) HD Graphics stepping 01
    [ 0.170000] Performance Events: AMD Family 15h PMU driver.
    [ 0.170000] ... version: 0
    [ 0.170000] ... bit width: 48
    [ 0.170000] ... generic registers: 6
    [ 0.170000] ... value mask: 0000ffffffffffff
    [ 0.170000] ... max period: 00007fffffffffff
    [ 0.170000] ... fixed-purpose events: 0
    [ 0.170000] ... event mask: 000000000000003f
    [ 0.170000] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.170000] Booting Node 0, Processors #1
    [ 0.170000] smpboot cpu 1: start_ip = 99000
    [ 7.443437] CPU1: Not responding.
    [ 7.445038] Brought up 1 CPUs
    [ 7.445164] Total of 1 processors activated (7186.96 BogoMIPS).
    [ 7.449107] devtmpfs: initialized
    [ 7.482442] PM: Registering ACPI NVS region at 9d856000 (3506176 bytes)
    [ 7.486598] PM: Registering ACPI NVS region at 9e9d4000 (2121728 bytes)
    [ 7.493031] NET: Registered protocol family 16
    [ 7.496249] Extended Config Space enabled on 0 nodes
    [ 7.496483] ACPI: bus type pci registered
    [ 7.498432] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 7.498554] PCI: not using MMCONFIG
    [ 7.498978] PCI: Using configuration type 1 for base access
    [ 7.499066] PCI: Using configuration type 1 for extended access
    [ 7.527324] bio: create slab <bio-0> at 0
    [ 7.601576] ACPI: EC: Look up EC in DSDT
    [ 7.685139] ACPI: Executed 1 blocks of module-level executable AML code
    [ 7.830050] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 7.845972] ACPI: Interpreter enabled
    [ 7.846060] ACPI: (supports S0 S3 S4 S5)
    [ 7.847202] ACPI: Using IOAPIC for interrupt routing
    [ 7.850557] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 7.851641] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 10.009318] ACPI: No dock devices found.
    [ 10.009448] HEST: Table not found.
    [ 10.009563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 10.018400] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 10.028017] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
    [ 10.028139] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
    [ 10.028263] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
    [ 10.028386] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 10.028508] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 10.028639] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 10.029075] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff]
    [ 10.029299] pci 0000:00:00.0: [1022:1410] type 0 class 0x000600
    [ 10.030321] pci 0000:00:00.2: [1022:1419] type 0 class 0x000806
    [ 10.032320] pci 0000:00:01.0: [1002:9991] type 0 class 0x000300
    [ 10.032465] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
    [ 10.032576] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
    [ 10.032990] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
    [ 10.034009] pci 0000:00:01.0: supports D1 D2
    [ 10.034262] pci 0000:00:01.1: [1002:9902] type 0 class 0x000403
    [ 10.034406] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
    [ 10.035595] pci 0000:00:01.1: supports D1 D2
    [ 10.036209] pci 0000:00:02.0: [1022:1412] type 1 class 0x000604
    [ 10.037405] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 10.037463] pci 0000:00:02.0: PME# disabled
    [ 10.038065] pci 0000:00:04.0: [1022:1414] type 1 class 0x000604
    [ 10.039258] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 10.039316] pci 0000:00:04.0: PME# disabled
    [ 10.040227] pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03
    [ 10.040423] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
    [ 10.041630] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    [ 10.041993] pci 0000:00:10.0: PME# disabled
    [ 10.042315] pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03
    [ 10.042510] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
    [ 10.044002] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
    [ 10.044059] pci 0000:00:10.1: PME# disabled
    [ 10.044424] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
    [ 10.044632] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
    [ 10.045026] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
    [ 10.045141] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
    [ 10.045255] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
    [ 10.045372] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
    [ 10.045486] pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
    [ 10.046377] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
    [ 10.046528] pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
    [ 10.047596] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
    [ 10.048081] pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
    [ 10.049232] pci 0000:00:12.2: supports D1 D2
    [ 10.049268] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 10.049324] pci 0000:00:12.2: PME# disabled
    [ 10.049558] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
    [ 10.050126] pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
    [ 10.051154] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
    [ 10.051363] pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
    [ 10.052509] pci 0000:00:13.2: supports D1 D2
    [ 10.052545] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 10.052603] pci 0000:00:13.2: PME# disabled
    [ 10.053123] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
    [ 10.054237] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
    [ 10.054467] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 10.055437] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 10.055495] pci 0000:00:14.2: PME# disabled
    [ 10.055640] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
    [ 10.056993] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
    [ 10.057448] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
    [ 10.057598] pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
    [ 10.058964] pci 0000:00:18.0: [1022:1400] type 0 class 0x000600
    [ 10.059537] pci 0000:00:18.1: [1022:1401] type 0 class 0x000600
    [ 10.060476] pci 0000:00:18.2: [1022:1402] type 0 class 0x000600
    [ 10.061308] pci 0000:00:18.3: [1022:1403] type 0 class 0x000600
    [ 10.062308] pci 0000:00:18.4: [1022:1404] type 0 class 0x000600
    [ 10.063128] pci 0000:00:18.5: [1022:1405] type 0 class 0x000600
    [ 10.064976] pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
    [ 10.065120] pci 0000:01:00.0: reg 10: [mem 0xfeac0000-0xfeadffff]
    [ 10.065243] pci 0000:01:00.0: reg 14: [mem 0xfea00000-0xfea7ffff]
    [ 10.065364] pci 0000:01:00.0: reg 18: [io 0xe000-0xe01f]
    [ 10.065487] pci 0000:01:00.0: reg 1c: [mem 0xfeae0000-0xfeae3fff]
    [ 10.066064] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeabffff pref]
    [ 10.066618] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 10.066975] pci 0000:01:00.0: PME# disabled
    [ 10.067368] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 10.067531] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 10.067587] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 10.067969] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 10.068963] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
    [ 10.069068] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
    [ 10.069308] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 10.069469] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 10.070508] pci 0000:02:00.0: supports D1 D2
    [ 10.070544] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 10.070602] pci 0000:02:00.0: PME# disabled
    [ 10.071304] pci 0000:00:04.0: PCI bridge to [bus 02-02]
    [ 10.071465] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    [ 10.071522] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 10.071601] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 10.072247] pci 0000:03:06.0: [1095:3114] type 0 class 0x000104
    [ 10.072438] pci 0000:03:06.0: reg 10: [io 0xc040-0xc047]
    [ 10.072558] pci 0000:03:06.0: reg 14: [io 0xc030-0xc033]
    [ 10.072989] pci 0000:03:06.0: reg 18: [io 0xc020-0xc027]
    [ 10.073069] pci 0000:03:06.0: reg 1c: [io 0xc010-0xc013]
    [ 10.073186] pci 0000:03:06.0: reg 20: [io 0xc000-0xc00f]
    [ 10.073303] pci 0000:03:06.0: reg 24: [mem 0xfe980000-0xfe9803ff]
    [ 10.073420] pci 0000:03:06.0: reg 30: [mem 0xfe900000-0xfe97ffff pref]
    [ 10.074010] pci 0000:03:06.0: supports D1 D2
    [ 10.074426] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 10.074564] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 10.074621] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 10.074981] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 10.074993] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 10.075032] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 10.075071] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 10.075108] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 10.075146] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 10.075183] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 10.075220] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 10.075413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 10.087428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [ 10.092229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
    [ 10.093609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
    [ 10.098972] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 10.105356] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 10.469632] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.473051] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.476159] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.479249] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.482314] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.485047] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.487433] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.490344] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.494044] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 10.494442] vgaarb: loaded
    [ 10.494556] vgaarb: bridge control possible 0000:00:01.0
    [ 10.496198] PCI: Using ACPI for IRQ routing
    [ 10.574000] PCI: pci_cache_line_size set to 64 bytes
    [ 10.575540] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 10.575579] reserve RAM buffer: 000000009d575000 - 000000009fffffff
    [ 10.575976] reserve RAM buffer: 000000009e9d4000 - 000000009fffffff
    [ 10.576002] reserve RAM buffer: 000000009f04c000 - 000000009fffffff
    [ 10.576049] reserve RAM buffer: 000000009f800000 - 000000009fffffff
    [ 10.576088] reserve RAM buffer: 000000043f000000 - 000000043fffffff
    [ 10.579048] NetLabel: Initializing
    [ 10.579161] NetLabel: domain hash size = 128
    [ 10.579273] NetLabel: protocols = UNLABELED CIPSOv4
    [ 10.580048] NetLabel: unlabeled traffic allowed by default
    [ 10.580185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 10.580995] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 10.583427] Switching to clocksource hpet
    [ 10.586451] Switched to NOHz mode on CPU #0
    [ 10.846011] pnp: PnP ACPI init
    [ 10.846721] ACPI: bus type pnp registered
    [ 10.851432] pnp 00:00: [bus 00-ff]
    [ 10.851473] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 10.851513] pnp 00:00: [io 0x0000-0x03af window]
    [ 10.851555] pnp 00:00: [io 0x03e0-0x0cf7 window]
    [ 10.851596] pnp 00:00: [io 0x03b0-0x03df window]
    [ 10.851637] pnp 00:00: [io 0x0d00-0xffff window]
    [ 10.851678] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 10.851718] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 10.851759] pnp 00:00: [mem 0xc0000000-0xffffffff window]
    [ 10.851799] pnp 00:00: [mem 0x00000000 window]
    [ 10.853412] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 10.854370] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 10.855576] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 10.855722] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 10.880640] pnp 00:02: [io 0x0010-0x001f]
    [ 10.880679] pnp 00:02: [io 0x0022-0x003f]
    [ 10.880718] pnp 00:02: [io 0x0063]
    [ 10.880756] pnp 00:02: [io 0x0065]
    [ 10.880795] pnp 00:02: [io 0x0067-0x006f]
    [ 10.880834] pnp 00:02: [io 0x0072-0x007f]
    [ 10.880873] pnp 00:02: [io 0x0080]
    [ 10.880912] pnp 00:02: [io 0x0084-0x0086]
    [ 10.880975] pnp 00:02: [io 0x0088]
    [ 10.881014] pnp 00:02: [io 0x008c-0x008e]
    [ 10.881052] pnp 00:02: [io 0x0090-0x009f]
    [ 10.881387] pnp 00:02: [io 0x00a2-0x00bf]
    [ 10.881422] pnp 00:02: [io 0x00b1]
    [ 10.881458] pnp 00:02: [io 0x00e0-0x00ef]
    [ 10.881494] pnp 00:02: [io 0x04d0-0x04d1]
    [ 10.881529] pnp 00:02: [io 0x040b]
    [ 10.881565] pnp 00:02: [io 0x04d6]
    [ 10.881601] pnp 00:02: [io 0x0c00-0x0c01]
    [ 10.881636] pnp 00:02: [io 0x0c14]
    [ 10.881672] pnp 00:02: [io 0x0c50-0x0c51]
    [ 10.881708] pnp 00:02: [io 0x0c52]
    [ 10.881743] pnp 00:02: [io 0x0c6c]
    [ 10.881779] pnp 00:02: [io 0x0c6f]
    [ 10.881815] pnp 00:02: [io 0x0cd0-0x0cd1]
    [ 10.881851] pnp 00:02: [io 0x0cd2-0x0cd3]
    [ 10.881886] pnp 00:02: [io 0x0cd4-0x0cd5]
    [ 10.881924] pnp 00:02: [io 0x0cd6-0x0cd7]
    [ 10.881959] pnp 00:02: [io 0x0cd8-0x0cdf]
    [ 10.881997] pnp 00:02: [io 0x0800-0x089f]
    [ 10.882033] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    [ 10.882376] pnp 00:02: [io 0x0000-0x000f]
    [ 10.882401] pnp 00:02: [io 0x0b20-0x0b3f]
    [ 10.882438] pnp 00:02: [io 0x0900-0x090f]
    [ 10.882474] pnp 00:02: [io 0x0910-0x091f]
    [ 10.882512] pnp 00:02: [io 0xfe00-0xfefe]
    [ 10.882547] pnp 00:02: [io 0x0060-0x005f disabled]
    [ 10.882583] pnp 00:02: [io 0x0064-0x0063 disabled]
    [ 10.882619] pnp 00:02: [mem 0xfec00000-0xfec00fff]
    [ 10.882656] pnp 00:02: [mem 0xfee00000-0xfee00fff]
    [ 10.882692] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
    [ 10.882728] pnp 00:02: [mem 0xfed61000-0xfed70fff]
    [ 10.882763] pnp 00:02: [mem 0xfec10000-0xfec10fff]
    [ 10.882801] pnp 00:02: [mem 0xfed00000-0xfed00fff]
    [ 10.882836] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 10.884490] system 00:02: [io 0x04d0-0x04d1] has been reserved
    [ 10.884616] system 00:02: [io 0x040b] has been reserved
    [ 10.884742] system 00:02: [io 0x04d6] has been reserved
    [ 10.884866] system 00:02: [io 0x0c00-0x0c01] has been reserved
    [ 10.884988] system 00:02: [io 0x0c14] has been reserved
    [ 10.885440] system 00:02: [io 0x0c50-0x0c51] has been reserved
    [ 10.885563] system 00:02: [io 0x0c52] has been reserved
    [ 10.885685] system 00:02: [io 0x0c6c] has been reserved
    [ 10.885807] system 00:02: [io 0x0c6f] has been reserved
    [ 10.885929] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    [ 10.886375] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    [ 10.886496] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
    [ 10.886619] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
    [ 10.886741] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
    [ 10.886863] system 00:02: [io 0x0800-0x089f] has been reserved
    [ 10.886986] system 00:02: [io 0x0b20-0x0b3f] has been reserved
    [ 10.887433] system 00:02: [io 0x0900-0x090f] has been reserved
    [ 10.887557] system 00:02: [io 0x0910-0x091f] has been reserved
    [ 10.887679] system 00:02: [io 0xfe00-0xfefe] has been reserved
    [ 10.887806] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 10.887928] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 10.888360] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 10.888468] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 10.888593] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 10.888715] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
    [ 10.888840] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
    [ 10.888981] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.892417] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
    [ 10.892456] pnp 00:03: [io 0x0220-0x0227]
    [ 10.892494] pnp 00:03: [io 0x0228-0x0237]
    [ 10.892534] pnp 00:03: [io 0x0a20-0x0a2f]
    [ 10.893890] system 00:03: [io 0x0220-0x0227] has been reserved
    [ 10.894018] system 00:03: [io 0x0228-0x0237] has been reserved
    [ 10.894460] system 00:03: [io 0x0a20-0x0a2f] has been reserved
    [ 10.894605] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.901525] pnp 00:04: [dma 4]
    [ 10.901565] pnp 00:04: [io 0x0000-0x000f]
    [ 10.901629] pnp 00:04: [io 0x0081-0x0083]
    [ 10.901667] pnp 00:04: [io 0x0087]
    [ 10.901706] pnp 00:04: [io 0x0089-0x008b]
    [ 10.901745] pnp 00:04: [io 0x008f]
    [ 10.901784] pnp 00:04: [io 0x00c0-0x00df]
    [ 10.902753] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 10.903004] pnp 00:05: [io 0x0070-0x0071]
    [ 10.903394] pnp 00:05: [irq 8]
    [ 10.904399] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 10.904582] pnp 00:06: [io 0x0061]
    [ 10.905587] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 10.906373] pnp 00:07: [io 0x0010-0x001f]
    [ 10.906408] pnp 00:07: [io 0x0022-0x003f]
    [ 10.906444] pnp 00:07: [io 0x0044-0x005f]
    [ 10.906481] pnp 00:07: [io 0x0072-0x007f]
    [ 10.906517] pnp 00:07: [io 0x0080]
    [ 10.906555] pnp 00:07: [io 0x0084-0x0086]
    [ 10.906592] pnp 00:07: [io 0x0088]
    [ 10.906627] pnp 00:07: [io 0x008c-0x008e]
    [ 10.906663] pnp 00:07: [io 0x0090-0x009f]
    [ 10.906699] pnp 00:07: [io 0x00a2-0x00bf]
    [ 10.906735] pnp 00:07: [io 0x00e0-0x00ef]
    [ 10.906771] pnp 00:07: [io 0x04d0-0x04d1]
    [ 10.908470] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 10.908615] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.908803] pnp 00:08: [io 0x00f0-0x00ff]
    [ 10.908895] pnp 00:08: [irq 13]
    [ 10.910515] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 10.912466] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.916697] pnp 00:0a: [mem 0xa0000000-0xbfffffff]
    [ 10.918472] system 00:0a: [mem 0xa0000000-0xbfffffff] has been reserved
    [ 10.918619] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.920584] pnp 00:0b: [mem 0xfeb80000-0xfebfffff]
    [ 10.922399] system 00:0b: [mem 0xfeb80000-0xfebfffff] has been reserved
    [ 10.922543] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.927499] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
    [ 10.928848] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 10.928958] pnp: PnP ACPI: found 13 devices
    [ 10.929375] ACPI: ACPI bus type pnp unregistered
    [ 10.990732] PCI: max bus depth: 1 pci_try_num: 2
    [ 10.990936] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 10.991384] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 10.991521] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 10.991658] pci 0000:00:02.0: bridge window [mem pref disabled]
    [ 10.991821] pci 0000:00:04.0: PCI bridge to [bus 02-02]
    [ 10.991949] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    [ 10.992386] pci 0000:00:04.0: bridge window [mem disabled]
    [ 10.992514] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 10.992683] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 10.992810] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 10.992960] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 10.993389] pci 0000:00:14.4: bridge window [mem pref disabled]
    [ 10.993675] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 10.993815] pci 0000:00:02.0: setting latency timer to 64
    [ 10.993994] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 10.994461] pci 0000:00:04.0: setting latency timer to 64
    [ 10.994566] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 10.994605] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 10.994644] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 10.994682] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 10.994721] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 10.994760] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 10.994799] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 10.994837] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 10.994876] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 10.994915] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    [ 10.994954] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 10.994993] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 10.995032] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
    [ 10.995368] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 10.995377] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 10.995414] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 10.995449] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 10.995485] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 10.995523] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 10.995559] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
    [ 10.996013] NET: Registered protocol family 2
    [ 11.011431] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 11.044698] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 11.051435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 11.051803] TCP: Hash tables configured (established 524288 bind 65536)
    [ 11.051921] TCP reno registered
    [ 11.052935] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 11.054372] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 11.056540] NET: Registered protocol family 1
    [ 11.056817] pci 0000:00:01.0: Boot video device
    [ 11.057014] pci 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 11.057627] pci 0000:00:10.0: PCI INT A disabled
    [ 11.057906] pci 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 11.058488] pci 0000:00:10.1: PCI INT B disabled
    [ 11.058705] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 11.150025] pci 0000:00:12.0: PCI INT A disabled
    [ 11.150071] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 11.150124] pci 0000:00:12.2: PCI INT B disabled
    [ 11.150160] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 11.240018] pci 0000:00:13.0: PCI INT A disabled
    [ 11.240057] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 11.240102] pci 0000:00:13.2: PCI INT B disabled
    [ 11.240147] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 11.330018] pci 0000:00:14.5: PCI INT C disabled
    [ 11.330066] PCI: CLS 64 bytes, default 64
    [ 11.330109] Unpacking initramfs...
    [ 0.040000] Kernel panic - not syncing: smp_callin: CPU1 started up but did not get a callout!
    [ 0.040000]
    [ 0.040000] Pid: 0, comm: kworker/0:0 Not tainted 3.0.46-1-lts #1
    [ 0.040000] Call Trace:
    [ 0.040000] [<ffffffff8140f6cd>] panic+0x91/0x197
    [ 0.040000] [<ffffffff8140884c>] start_secondary+0xcb/0x1fe
    [ 26.201608] Freeing initrd memory: 102612k freed
    [ 26.228111] pci 0000:00:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 26.228318] pci 0000:00:00.2: irq 40 for MSI/MSI-X
    [ 26.228396] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA
    [ 26.240635] AMD-Vi: Lazy IO/TLB flushing enabled
    [ 26.240671] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 26.240706] Placing 64MB software IO TLB between ffff880099575000 - ffff88009d575000
    [ 26.240743] software IO TLB at phys 0x99575000 - 0x9d575000
    [ 26.241067] audit: initializing netlink socket (disabled)
    [ 26.241110] type=2000 audit(1356177972.230:1): initialized
    [ 26.250693] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 26.254005] VFS: Disk quotas dquot_6.5.2
    [ 26.254149] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 26.254346] msgmni has been set to 31046
    [ 26.254555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 26.254612] io scheduler noop registered
    [ 26.254646] io scheduler deadline registered (default)
    [ 26.254719] io scheduler cfq registered
    [ 26.254848] pcieport 0000:00:02.0: setting latency timer to 64
    [ 26.254910] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
    [ 26.254987] pcieport 0000:00:04.0: setting latency timer to 64
    [ 26.255045] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
    [ 26.255142] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
    [ 26.255177] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 26.255212] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
    [ 26.255257] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
    [ 26.255291] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 26.255327] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
    [ 26.255434] ERST: Table is not found!
    [ 26.255511] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 26.255875] Linux agpgart interface v0.103
    [ 26.255970] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 26.256358] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 26.256395] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 26.256512] mousedev: PS/2 mouse device common for all mice
    [ 26.256588] rtc_cmos 00:05: RTC can wake from S4
    [ 26.256715] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 26.256781] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 26.256827] cpuidle: using governor ladder
    [ 26.256868] cpuidle: using governor menu
    [ 26.257182] TCP cubic registered
    [ 26.257413] NET: Registered protocol family 10
    [ 26.258198] NET: Registered protocol family 17
    [ 26.258233] Registering the dns_resolver key type
    [ 26.258395] PM: Hibernation image not present or could not be loaded.
    [ 26.258450] registered taskstats version 1
    [ 26.259761] rtc_cmos 00:05: setting system clock to 2012-12-22 12:06:13 UTC (1356177973)
    [ 26.261125] Initializing network drop monitor service
    [ 26.263013] Freeing unused kernel memory: 732k freed
    [ 26.263239] Write protecting the kernel read-only data: 8192k
    [ 26.272919] Freeing unused kernel memory: 1888k freed
    [ 26.277038] Freeing unused kernel memory: 696k freed
    [ 26.303407] systemd-udevd[37]: starting version 194
    [ 27.541378] Refined TSC clocksource calibration: 3593.465 MHz.
    [ 27.541426] Switching to clocksource tsc
    [ 30.186206] HDA Intel 0000:00:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [ 30.186313] HDA Intel 0000:00:01.1: irq 43 for MSI/MSI-X
    [ 30.186378] HDA Intel 0000:00:01.1: setting latency timer to 64
    [ 30.191054] usbcore: registered new interface driver usbfs
    [ 30.191133] usbcore: registered new interface driver hub
    [ 30.197110] SCSI subsystem initialized
    [ 30.216692] usbcore: registered new device driver usb
    [ 30.220148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 30.232290] input: PC Speaker as /devices/platform/pcspkr/input/input0
    [ 30.234124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 30.239267] libata version 3.00 loaded.
    [ 30.244294] ACPI: acpi_idle registered with cpuidle
    [ 30.246226] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 30.246282] ACPI: Power Button [PWRB]
    [ 30.246380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 30.246418] ACPI: Power Button [PWRF]
    [ 30.249692] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
    [ 30.249737] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 30.249802] e1000e 0000:01:00.0: Disabling ASPM L0s L1
    [ 30.249846] e1000e 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 30.249902] e1000e 0000:01:00.0: setting latency timer to 64
    [ 30.250227] e1000e 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 30.250263] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
    [ 30.250307] e1000e 0000:01:00.0: irq 46 for MSI/MSI-X
    [ 30.252812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 30.252873] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 30.252954] r8169 0000:02:00.0: setting latency timer to 64
    [ 30.253001] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
    [ 30.253103] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 30.253760] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000187e000, 94:de:80:06:0b:c2, XID 0c900800 IRQ 47
    [ 30.253799] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
    [ 30.255615] sata_sil 0000:03:06.0: version 2.4
    [ 30.255694] sata_sil 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 30.255763] sata_sil 0000:03:06.0: Applying R_ERR on DMA activate FIS errata fix
    [ 30.259490] scsi0 : sata_sil
    [ 30.262529] scsi1 : sata_sil
    [ 30.265318] scsi2 : sata_sil
    [ 30.268147] scsi3 : sata_sil
    [ 30.268259] ata1: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980080 irq 20
    [ 30.268301] ata2: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9800c0 irq 20
    [ 30.268350] ata3: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980280 irq 20
    [ 30.268389] ata4: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9802c0 irq 20
    [ 30.375388] e1000e 0000:01:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:0c:a8:da
    [ 30.375437] e1000e 0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
    [ 30.375481] e1000e 0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-007
    [ 30.620035] ata1: SATA link down (SStatus 0 SControl 310)
    [ 30.970035] ata2: SATA link down (SStatus 0 SControl 310)
    [ 31.320029] ata3: SATA link down (SStatus 0 SControl 310)
    [ 31.670023] ata4: SATA link down (SStatus 0 SControl 310)
    [ 31.674284] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 31.674524] HDMI: no space for converter 10
    [ 31.674615] HDMI: no space for converter 12
    [ 31.674967] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
    [ 31.675144] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 31.776299] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 31.776372] xhci_hcd 0000:00:10.0: setting latency timer to 64
    [ 31.776418] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 31.776483] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
    [ 31.776563] QUIRK: Enable AMD PLL fix
    [ 31.776792] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
    [ 31.776885] xhci_hcd 0000:00:10.0: irq 48 for MSI/MSI-X
    [ 31.776920] xhci_hcd 0000:00:10.0: irq 49 for MSI/MSI-X
    [ 31.777146] xHCI xhci_add_endpoint called for root hub
    [ 31.777190] xHCI xhci_check_bandwidth called for root hub
    [ 31.777261] hub 1-0:1.0: USB hub found
    [ 31.777297] hub 1-0:1.0: 2 ports detected
    [ 31.777433] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 31.777473] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
    [ 31.780285] xHCI xhci_add_endpoint called for root hub
    [ 31.780329] xHCI xhci_check_bandwidth called for root hub
    [ 31.780399] hub 2-0:1.0: USB hub found
    [ 31.780436] hub 2-0:1.0: 2 ports detected
    [ 31.780543] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 31.780600] xhci_hcd 0000:00:10.1: setting latency timer to 64
    [ 31.780635] xhci_hcd 0000:00:10.1: xHCI Host Controller
    [ 31.780673] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    [ 31.780929] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
    [ 31.781018] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
    [ 31.781053] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
    [ 31.781245] xHCI xhci_add_endpoint called for root hub
    [ 31.781289] xHCI xhci_check_bandwidth called for root hub
    [ 31.781358] hub 3-0:1.0: USB hub found
    [ 31.781393] hub 3-0:1.0: 2 ports detected
    [ 31.781502] xhci_hcd 0000:00:10.1: xHCI Host Controller
    [ 31.781554] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
    [ 31.784397] xHCI xhci_add_endpoint called for root hub
    [ 31.784430] xHCI xhci_check_bandwidth called for root hub
    [ 31.784493] hub 4-0:1.0: USB hub found
    [ 31.784540] hub 4-0:1.0: 2 ports detected
    [ 31.785260] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 31.785314] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 31.785363] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
    [ 31.785405] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 31.785467] ehci_hcd 0000:00:12.2: debug port 1
    [ 31.785526] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4f000
    [ 31.800124] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 31.800381] hub 5-0:1.0: USB hub found
    [ 31.800426] hub 5-0:1.0: 5 ports detected
    [ 31.800575] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 31.800648] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 31.800698] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
    [ 31.800740] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 31.800804] ehci_hcd 0000:00:13.2: debug port 1
    [ 31.800861] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4d000
    [ 31.820016] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 31.820236] hub 6-0:1.0: USB hub found
    [ 31.820271] hub 6-0:1.0: 5 ports detected
    [ 31.820930] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 31.820996] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 31.821039] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
    [ 31.821105] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
    [ 31.884261] hub 7-0:1.0: USB hub found
    [ 31.884311] hub 7-0:1.0: 5 ports detected
    [ 31.884462] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 31.884533] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 31.884580] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8
    [ 31.884644] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
    [ 31.944186] hub 8-0:1.0: USB hub found
    [ 31.944235] hub 8-0:1.0: 5 ports detected
    [ 31.944362] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 31.944416] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 31.944452] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
    [ 31.944510] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
    [ 32.004245] hub 9-0:1.0: USB hub found
    [ 32.004283] hub 9-0:1.0: 2 ports detected
    [ 32.004581] ahci 0000:00:11.0: version 3.0
    [ 32.004627] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 32.004727] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
    [ 32.004892] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 7 ports 6 Gbps 0xfd impl SATA mode
    [ 32.004931] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 32.009602] scsi4 : ahci
    [ 32.009824] scsi5 : ahci
    [ 32.010050] scsi6 : ahci
    [ 32.010213] scsi7 : ahci
    [ 32.010363] scsi8 : ahci
    [ 32.010529] scsi9 : ahci
    [ 32.010677] scsi10 : ahci
    [ 32.010837] scsi11 : ahci
    [ 32.011601] ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 52
    [ 32.012773] ata6: DUMMY
    [ 32.012806] ata7: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 52
    [ 32.012845] ata8: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 52
    [ 32.012893] ata9: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 52
    [ 32.012930] ata10: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 52
    [ 32.012969] ata11: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51400 irq 52
    [ 32.013016] ata12: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51480 irq 52
    [ 32.120025] usb 5-3: new high speed USB device number 2 using ehci_hcd
    [ 32.274376] Initializing USB Mass Storage driver...
    [ 32.274825] scsi12 : usb-storage 5-3:1.0
    [ 32.274957] usbcore: registered new interface driver usb-storage
    [ 32.274991] USB Mass Storage support registered.
    [ 32.560018] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 32.560079] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 32.560137] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 32.560196] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 32.560242] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 32.560299] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 32.560580] ata7.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
    [ 32.560626] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.560947] ata11.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
    [ 32.560993] ata11.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 32.561209] ata7.00: configured for UDMA/133
    [ 32.561773] ata11.00: configured for UDMA/133
    [ 32.563779] ata8.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
    [ 32.563814] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.564285] ata5.00: ATA-6: WDC WD2500JD-00HBB0, 08.02D08, max UDMA/133
    [ 32.564327] ata5.00: 488397168 sectors, multi 16: LBA48
    [ 32.566291] ata10.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
    [ 32.566329] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.566492] ata12.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
    [ 32.566526] ata12.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.567782] ata8.00: configured for UDMA/133
    [ 32.569759] ata5.00: configured for UDMA/133
    [ 32.569893] scsi 4:0:0:0: Direct-Access ATA WDC WD2500JD-00H 08.0 PQ: 0 ANSI: 5
    [ 32.570286] scsi 6:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
    [ 32.570502] scsi 7:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
    [ 32.572474] ata10.00: configured for UDMA/133
    [ 32.572682] ata12.00: configured for UDMA/133
    [ 32.660017] usb 7-4: new low speed USB device number 2 using ohci_hcd
    [ 32.868292] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.0/input/input4
    [ 32.868415] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input0
    [ 32.881147] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.1/input/input5
    [ 32.881240] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input1
    [ 32.881304] usbcore: registered new interface driver usbhid
    [ 32.881338] usbhid: USB HID core driver
    [ 33.271305] scsi 12:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2
    [ 33.280033] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 33.305314] ata9.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
    [ 33.305349] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 33.314972] ata9.00: configured for UDMA/133
    [ 33.315074] scsi 8:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
    [ 33.315323] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
    [ 33.315536] scsi 10:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
    [ 33.315746] scsi 11:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
    [ 33.333300] sd 11:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333360] sd 7:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333415] sd 10:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333463] sd 9:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333524] sd 8:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333575] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333613] sd 6:0:0:0: [sdb] 4096-byte physical blocks
    [ 33.333753] sd 10:0:0:0: [sdg] Write Protect is off
    [ 33.333787] sd 10:0:0:0: [sdg] Mode Sense: 00 3a 00 00
    [ 33.333950] sd 8:0:0:0: [sde] Write Protect is off
    [ 33.333984] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
    [ 33.334046] sd 9:0:0:0: [sdf] Write Protect is off
    [ 33.334079] sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00
    [ 33.334138] sd 7:0:0:0: [sdc] Write Protect is off
    [ 33.334172] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 33.334224] sd 11:0:0:0: [sdh] Write Protect is off
    [ 33.334257] sd 11:0:0:0: [sdh] Mode Sense: 00 3a 00 00
    [ 33.334358] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.334526] sd 6:0:0:0: [sdb] Write Protect is off
    [ 33.334561] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 33.334629] sd 11:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.334808] sd 12:0:0:0: [sdd] 7837696 512-byte logical blocks: (4.01 GB/3.73 GiB)
    [ 33.334865] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.334982] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.335109] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.335222] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.335777] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 33.335862] sd 12:0:0:0: [sdd] Write Protect is off
    [ 33.335896] sd 12:0:0:0: [sdd] Mode Sense: 03 00 00 00
    [ 33.336251] sd 4:0:0:0: [sda] Write Protect is off
    [ 33.336285] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 33.336346] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.336757] sd 12:0:0:0: [sdd] No Caching mode page present
    [ 33.336792] sd 12:0:0:0: [sdd] Assuming drive cache: write through
    [ 33.339872] sd 12:0:0:0: [sdd] No Caching mode page present
    [ 33.339909] sd 12:0:0:0: [sdd] Assuming drive cache: write through
    [ 33.344926] sdd: sdd1
    [ 33.347492] sd 12:0:0:0: [sdd] No Caching mode page present
    [ 33.347539] sd 12:0:0:0: [sdd] Assuming drive cache: write through
    [ 33.347574] sd 12:0:0:0: [sdd] Attached SCSI removable disk
    [ 33.376773] sde: sde1
    [ 33.377154] sd 8:0:0:0: [sde] Attached SCSI disk
    [ 33.377403] sdh: sdh1
    [ 33.377691] sd 11:0:0:0: [sdh] Attached SCSI disk
    [ 33.380652] sdg: sdg1
    [ 33.381033] sd 10:0:0:0: [sdg] Attached SCSI disk
    [ 33.395456] sdf: sdf1
    [ 33.395801] sd 9:0:0:0: [sdf] Attached SCSI disk
    [ 33.397545] sdb: sdb1
    [ 33.397930] sd 6:0:0:0: [sdb] Attached SCSI disk
    [ 33.435935] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
    [ 33.436519] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 33.439473] mdadm: sending ioctl 800c0910 to a partition!
    [ 33.439519] mdadm: sending ioctl 800c0910 to a partition!
    [ 33.439696] mdadm: sending ioctl 1261 to a partition!
    [ 33.439728] mdadm: sending ioctl 1261 to a partition!
    [ 33.442061] mdadm: sending ioctl 1261 to a partition!
    [ 33.442108] mdadm: sending ioctl 1261 to a partition!
    [ 33.442467] mdadm: sending ioctl 1261 to a partition!
    [ 33.442502] mdadm: sending ioctl 1261 to a partition!
    [ 33.443944] mdadm: sending ioctl 1261 to a partition!
    [ 33.443981] mdadm: sending ioctl 1261 to a partition!
    [ 33.815407] sdc: sdc1
    [ 33.815744] sd 7:0:0:0: [sdc] Attached SCSI disk
    [ 33.819038] md: bind<sdg1>
    [ 33.823005] md: bind<sdh1>
    [ 33.830376] md: bind<sde1>
    [ 33.832743] md: raid0 personality registered for level 0
    [ 33.833265] bio: create slab <bio-1> at 1
    [ 33.833302] md/raid0:md127: looking at sdh1
    [ 33.833336] md/raid0:md127: comparing sdh1(3907026944) with sdh1(3907026944)
    [ 33.833414] md/raid0:md127: END
    [ 33.833446] md/raid0:md127: ==> UNIQUE
    [ 33.833478] md/raid0:md127: 1 zones
    [ 33.833511] md/raid0:md127: looking at sdg1
    [ 33.833554] md/raid0:md127: comparing sdg1(3907026944) with sdh1(3907026944)
    [ 33.833623] md/raid0:md127: EQUAL
    [ 33.833655] md/raid0:md127: FINAL 1 zones
    [ 33.833689] md/raid0:md127: done.
    [ 33.833733] md/raid0:md127: md_size is 7814053888 sectors.
    [ 33.833766] ******* md127 configuration *********
    [ 33.833798] zone0=[sdg1/sdh1/]
    [ 33.833947] zone offset=0kb device offset=0kb size=3907026944kb
    [ 33.833988] **********************************
    [ 33.833992]
    [ 33.835269] md127: detected capacity change from 0 to 4000795590656
    [ 33.838003] md: bind<sdb1>
    [ 33.842049] md: bind<sdf1>
    [ 33.844170] md127: unknown partition table
    [ 33.924815] md: bind<sdc1>
    [ 34.090011] raid6: int64x1 1791 MB/s
    [ 34.260030] raid6: int64x2 2819 MB/s
    [ 34.430025] raid6: int64x4 2663 MB/s
    [ 34.600019] raid6: int64x8 2518 MB/s
    [ 34.770025] raid6: sse2x1 5795 MB/s
    [ 34.940016] raid6: sse2x2 8139 MB/s
    [ 35.110014] raid6: sse2x4 10354 MB/s
    [ 35.110047] raid6: using algorithm sse2x4 (10354 MB/s)
    [ 35.110907] async_tx: api initialized (async)
    [ 35.111085] xor: automatically using best checksumming function: generic_sse
    [ 35.160010] generic_sse: 5798.000 MB/sec
    [ 35.160043] xor: using function: generic_sse (5798.000 MB/sec)
    [ 35.161180] md: raid6 personality registered for level 6
    [ 35.161216] md: raid5 personality registered for level 5
    [ 35.161249] md: raid4 personality registered for level 4
    [ 35.162194] md/raid:md126: device sdc1 operational as raid disk 3
    [ 35.162258] md/raid:md126: device sdf1 operational as raid disk 1
    [ 35.162302] md/raid:md126: device sdb1 operational as raid disk 0
    [ 35.162337] md/raid:md126: device sde1 operational as raid disk 2
    [ 35.162969] md/raid:md126: allocated 4272kB
    [ 35.164323] md/raid:md126: raid level 5 active with 4 out of 4 devices, algorithm 2
    [ 35.164368] RAID conf printout:
    [ 35.164401] --- level:5 rd:4 wd:4
    [ 35.164434] disk 0, o:1, dev:sdb1
    [ 35.164472] disk 1, o:1, dev:sdf1
    [ 35.164514] disk 2, o:1, dev:sde1
    [ 35.164547] disk 3, o:1, dev:sdc1
    [ 35.164615] md126: detected capacity change from 0 to 6000789159936
    [ 35.210084] md126: unknown partition table
    [ 37.116016] device-mapper: uevent: version 1.0.3
    [ 37.116160] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
    [ 48.147927] systemd[1]: systemd 194 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 48.148113] systemd[1]: Running in initial RAM disk.
    [ 48.148564] systemd[1]: Set hostname to <archboot>.
    [ 48.148763] systemd[1]: Initializing machine ID from random generator.
    [ 48.163323] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 48.163530] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 48.163664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 48.163714] systemd[1]: Starting Remote File Systems.
    [ 48.164039] systemd[1]: Reached target Remote File Systems.
    [ 48.164095] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 48.164379] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 48.164429] systemd[1]: Starting Delayed Shutdown Socket.
    [ 48.164734] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 48.164802] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 48.165217] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 48.165268] systemd[1]: Starting Encrypted Volumes.
    [ 48.165538] systemd[1]: Reached target Encrypted Volumes.
    [ 48.165666] systemd[1]: Starting udev Kernel Socket.
    [ 48.165964] systemd[1]: Listening on udev Kernel Socket.
    [ 48.166045] systemd[1]: Starting udev Control Socket.
    [ 48.166338] systemd[1]: Listening on udev Control Socket.
    [ 48.166395] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 48.166498] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 48.166557] systemd[1]: Starting Swap.
    [ 48.166826] systemd[1]: Reached target Swap.
    [ 48.166869] systemd[1]: Starting Journal Socket.
    [ 48.167200] systemd[1]: Listening on Journal Socket.
    [ 48.167260] systemd[1]: Started File System Check on Root Device.
    [ 48.167303] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 48.168421] systemd[1]: Starting Load Kernel Modules...
    [ 48.170881] systemd[1]: Starting Setup Virtual Console...
    [ 48.173799] FS-Cache: Loaded
    [ 48.177917] systemd[1]: Mounting POSIX Message Queue File System...
    [ 48.179690] systemd[1]: Mounting Huge Pages File System...
    [ 48.180633] systemd[1]: Starting Apply Kernel Variables...
    [ 48.181486] systemd[1]: Started Set Up Additional Binary Formats.
    [ 48.181595] systemd[1]: Starting udev Kernel Device Manager...
    [ 48.184266] systemd[1]: Mounting Debug File System...
    [ 48.185010] systemd[1]: Starting udev Coldplug all Devices...
    [ 48.185722] systemd[1]: Starting Journal Service...
    [ 48.186733] systemd[1]: Started Journal Service.
    [ 48.187650] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 48.187720] systemd[1]: Starting Local File Systems (Pre).
    [ 48.187982] systemd[1]: Reached target Local File Systems (Pre).
    [ 48.188037] systemd[1]: Mounting /tmp...
    [ 48.188726] systemd[1]: Starting Load Random Seed...
    [ 48.199278] systemd-udevd[1369]: starting version 194
    [ 48.259482] RPC: Registered named UNIX socket transport module.
    [ 48.259519] RPC: Registered udp transport module.
    [ 48.259552] RPC: Registered tcp transport module.
    [ 48.259595] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 48.264576] FS-Cache: Netfs 'nfs' registered for caching
    [ 48.270453] systemd-modules-load[1361]: Inserted module 'nfs'
    [ 48.275596] systemd-journald[1372]: Received SIGUSR1
    [ 48.653395] scsi_verify_blk_ioctl: 184 callbacks suppressed
    [ 48.653431] mdadm: sending ioctl 1261 to a partition!
    [ 48.653475] mdadm: sending ioctl 1261 to a partition!
    [ 48.653686] mdadm: sending ioctl 1261 to a partition!
    [ 48.653725] mdadm: sending ioctl 1261 to a partition!
    [ 94.390769] r8169 0000:02:00.0: eth0: link down
    [ 94.390805] r8169 0000:02:00.0: eth0: link down
    [ 94.391909] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 96.827209] r8169 0000:02:00.0: eth0: link up
    [ 96.828288] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 107.460005] eth0: no IPv6 routers present
    and /proc/cpuinfo:
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 21
    model : 16
    model name : AMD A6-5400K APU with Radeon(tm) HD Graphics
    stepping : 1
    cpu MHz : 3593.482
    cache size : 1024 KB
    physical id : 0
    siblings : 1
    core id : 0
    cpu cores : 1
    apicid : 16
    initial apicid : 0
    fpu : yes
    fpu_exception : yes
    cpuid level : 13
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rd

    itbane wrote:
    Sorry fore double-posting, but there's something new:
    At beginning, the PC continued booting after throwing this issue. But now, Booting sometimes just stops at the very moment when the CPU is not responding.
    ...sounds like a hardware problem to me given the sporadic nature.

  • After installing Mavericks, my computer is slow/not responding

    After installing Mavericks, my computer is not responding and reacting as quickly as (I think) it should. Here are the EtreCheck results. Any help would be much appreciated. Thanks in advance!
    Hardware Information:
              iMac (27-inch, Mid 2010)
              iMac - model: iMac11,3
              1 2.93 GHz Intel Core i7 CPU: 4 cores
              16 GB RAM
    Video Information:
              ATI Radeon HD 5750 - VRAM: 1024 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 9:55:48
    Disk Information:
              Hitachi HDS722020ALA330 disk0 : (2 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 2 TB (1.25 TB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-STDVDRW  GA32N 
    USB Information:
              Apple, Inc. Keyboard Hub
                        Apple, Inc Apple Keyboard
              Apple Inc. Built-in iSight
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Internal Memory Card Reader
    FireWire Information:
              WD My Book 111D 800mbit - 800mbit max
                        disk1s1 (disk1s1) <not mounted>: 32 KB
                        My Book (disk1s3) /Volumes/My Book: 1 TB (30.96 GB free)
    Thunderbolt Information:
    Kernel Extensions:
              com.kaspersky.kext.klif          (3.0.2d39)
              com.kaspersky.nke          (1.0.2d43)
              com.kaspersky.kext.kimul.44          (44)
    Startup Items:
              FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist 3rd-Party support link
              [loaded] com.adobe.SwitchBoard.plist 3rd-Party support link
              [loaded] com.kaspersky.kav.plist 3rd-Party support link
              [loaded] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [invalid] com.oracle.java.Helper-Tool.plist
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [loaded] com.adobe.CS5ServiceManager.plist 3rd-Party support link
              [loaded] com.divx.dms.agent.plist 3rd-Party support link
              [loaded] com.divx.update.agent.plist 3rd-Party support link
              [loaded] com.kaspersky.kav.gui.plist 3rd-Party support link
              [invalid] com.oracle.java.Java-Updater.plist
    User Launch Agents:
              [loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
              [loaded] com.google.keystone.agent.plist 3rd-Party support link
    User Login Items:
              Scroll Reverser
              Scroll Reverser
              iTunesHelper
              EEventManager
              Dropbox
              AdobeResourceSynchronizer
              EEventManager
              ConnectService
    Internet Plug-ins:
              Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              OVSHelper: Version: 1.1 3rd-Party support link
              NP_2020Player_WEB: Version: 5.0.94.0 - SDK 10.6 3rd-Party support link
              RealPlayer Plugin: Version: (null) 3rd-Party support link
              AdobePDFViewerNPAPI: Version: 11.0.02 - SDK 10.6 3rd-Party support link
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 3rd-Party support link
              AdobePDFViewer: Version: 9.5.5 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    User Internet Plug-ins:
              Unity Web Player: Version: UnityPlayer version 2.6.1f3 3rd-Party support link
    3rd Party Preference Panes:
              Fan Control  3rd-Party support link
              Flash Player  3rd-Party support link
              Perian  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              /Library/Application Support/DivX
                        DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        DivXMediaServer:          Version: 10.0 - SDK 10.5 3rd-Party support link
                        DivXTransferWizard:          Version: 10.0.0 (Build 10.0.1.41) - SDK 10.5 3rd-Party support link
                        DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
              SketchUp:          Version: 8.0 - SDK 10.5 3rd-Party support link
                        /Applications/Google SketchUp 8/SketchUp.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Wondershare Helper Compact:          Version: 2.2.3.1 - SDK 10.5 3rd-Party support link
                        /Users/christophermcgreger/Library/Application Support/Helper/Wondershare Helper Compact.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5 3rd-Party support link
                        /Users/christophermcgreger/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
              Wondershare AllMyTube:          Version: 3.2.4 - SDK 10.5 3rd-Party support link
                        /Applications/Wondershare AllMyTube/Wondershare AllMyTube.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 2  Disk used: 696.37 GB
              Destinations:
                        My Book [Local]
                        Total size: 931.36 GB
                        Total number of backups: 51
                        Oldest backup: 2013-07-17 12:40:03 +0000
                        Last backup: 2014-01-05 23:55:06 +0000
                        Size of backup disk: Too small
                                  Backup size 931.36 GB < (Disk used 696.37 GB X 3)
                        Data [Network] (Last used)
                        Total size: 3 
                        Total number of backups: 53
                        Oldest backup: 2013-07-16 22:38:22 +0000
                        Last backup: 2014-01-05 22:50:13 +0000
                        Size of backup disk: Adequate
                                  Backup size 3  > (Disk used 696.37 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  11%          mds
                   3%          WindowServer
                   2%          diskimages-helper
                   1%          EtreCheck
                   1%          kav
    Top Processes by Memory:
              524 MB          mds_stores
              360 MB          kav
              246 MB          com.apple.IconServicesAgent
              213 MB          com.apple.MediaLibraryService
              164 MB          Finder
    Virtual Memory Information:
              10.45 GB          Free RAM
              3.44 GB          Active RAM
              851 MB          Inactive RAM
              1.27 GB          Wired RAM
              918 MB          Page-ins
              0 B          Page-outs

    CrassBrauer wrote:
    ... With the latest software updates for OS X, I've read that anti-virus software is largely superfluous for Mac. Any opinions to the contrary/negative experiences?
    Almost. Anti-virus software is completely superfluous for Mac.
    I have tested most of the commonly available Mac "anti-virus" products under controlled conditions. The only differences between them are their varying degree of worthlessness. Some are malicious and will corrupt your Mac. The vast majority of Mac problems reported on this site are the direct result of using such products.
    OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
    A much better question is "how should I protect my Mac":
    Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
    Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
    Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
    Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
    Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
    Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
    Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
    Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
    Don’t install Java unless you are certain that you need it:
    Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
    Disable Java in Safari > Preferences > Security.
    Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
    Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
    Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
    Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
    If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
    Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
    The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
    OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
    Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
    If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
    Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
    Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
    Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

  • Storage Array (EqualLogic) Status: Not Responding in VMM

    We have a customer running SCVMM 2012 SP1, using 2 nodes and the underlying storage is an EqualLogic box.
    Worked fine for a while, but a couple of weeks ago their SCVMM started complaining about failed jobs regarding the storage provider. The error message is:
    Error (2912)
    An internal error has occurred trying to contact the VP-SCVMM01.customer.local server: :a:DestinationUnreachable: :MI RESULT 6:The requested object could not be found..
    WinRM: URL: [http://vp-scvmm01.customer.local:5985], Verb: [GET], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/windows/storage/MSFT_StorageSubSystem?ObjectId={1}\\VP-SCVMM01\root/Microsoft/Windows/Storage/Providers\EQL_StorageSubSystem.ObjectId="6019CB11A5A29937571EA5"]
    The handle is invalid (0x80070006)
    Recommended Action
    Check that WS-Management service is installed and running on server VP-SCVMM01.customer.local. For more information use the command "winrm helpmsg hresult". If VP-SCVMM01.customer.local is a host/library/update server or a PXE server role then ensure that VMM agent is installed and running.
    The storage provider in SCVMM is listed as "not responding" as is the Array itself.
    Anybody any idea to resolve this?
    The closest thing I could find was this thread, somebody mentions the same problem: http://social.technet.microsoft.com/wiki/contents/articles/12038.vmm-2012-sp1-installing-and-configuring-dell-equallogic-ps-series-smp-provider.aspx
    Only difference is that we didn't do any upgrade or change. Based on his comment I would like to remove the storage provider and re-add it but I want to make sure that removing it doesn't break anything for the LUN's or the fact they keep being presented
    to the hosts.

    Hello...
    What version of Dell EqualLogic Host Integration Tools for Microsoft are you using?
    Are you able to manage EqualLogic storage using the SMP Provider from native Windows File and Storage Services in Server Manager?
    Basic troubleshooting steps I would recommend are to restart the "EqualLogic SMP Host Service" - and perhaps also restart "Windows Remote Management (WS-Management)" Service.
    Has anything recently changed on the Dell EqualLogic group - such as admin account credentials, ip address changes, or the introduction of management interfaces?  I would check to ensure that the SMP Provider is properly configured (username, password,
    group ip or management ip, etc...).  You can do this via the Dell EqualLogic PowerShell Tools or via Dell EqualLogic Auto-Snapshot Manager / Microsoft Edition. 
    Here is a useful Deployment and Configuration Guide for using the Dell EqualLogic SMP Provider with SCVMM 2012 SP1: 
    http://en.community.dell.com/techcenter/extras/m/white_papers/20437936.aspx
    Keep me posted.  Good luck.

Maybe you are looking for