"Host Process Rundll32 Has Stopped Working"

Whenever I try to access the advanced settings option in my TouchPad, I get this this message that Rundll32 has stopped working. This is frustrating as I can't figure out what went wrong. Was working fine about a month ago.
Can anyone help?
Thanks.
Problem signature
Problem Event Name:   APPCRASH
Application Name:   rundll32.exe
Application Version:   6.0.6000.16386
Application Timestamp:   4549b0e1
Fault Module Name:   SynTPCpl.dll
Fault Module Version:   11.1.2.0
Fault Module Timestamp:   47feddf4
Exception Code:   c0000005
Exception Offset:   0005eb33
OS Version:   6.0.6001.2.1.0.768.3
Locale ID:   1033
Additional Information 1:   c616
Additional Information 2:   8121c2705713f4593f5a5508e686aad9
Additional Information 3:   347c
Additional Information 4:   fe54a833954e66c7f20c74e1dd1eca61
Extra information about the problem
Bucket ID:   1138691475
Message Edited by front-of-house on 02-11-2009 03:02 PM
SL500 2746 CTO, 2.0 7370, 3 GB ram, Vista Hm. Prem.SP2
Bios ver. 1.24
Solved!
Go to Solution.

The latest UltraNav utility for the SL500 (Vista) is located here and the latest UltraNav driver is located here.
You will find installation instructions on these pages that might help you installing the packages without errors.
Thank you
Message Edited by JohnB on 02-12-2009 07:27 AM
John B @ forum.notebookreview.com

Similar Messages

Office 2013: Windows host process (Rundll32) has stopped working

Hi,
I have problems with adding additional e-mail address to my Outlook. When I open the Mail Control Panel Item, go to my Exchange Profile and add a new e-mail address I get a popup indicating that the Windows host process (Rundll32) has stopped working.
The only way of adding extra e-mail addresses is to remove my entire Outlook Profile. In the initial wizard I can add all Exchange mailboxes that I need (I have 3). After I've configured my Outlook profile I always receive the Rundll32 error. When I try
to create a second Outlook profile I still get the same error.
I've tried the following:
- Repair OST file
- Repair Office -> Control Panel and Online Repair
- Reinstall Office
- Reinstall my entire PC
It doesn't matter which e-mail address I add in the initial Outlook configuration wizard. I always receive the error when I try to add a new mailbox, even when I add a mailbox that does not exist (e.g. [email protected]).
Even after reinstalling my PC I still get the same error. I'm using Windows 8.1 (x64) and Office 2013 (32-bit) on a Lenovo W540. None of my colleagues have this issue. It's a domain joined PC and we are not using Roaming Profiles.
For troubleshooting I also created a local account on my laptop but I get the same issues with this account.

Hi,
I'm also using Office 2013 32-bit and Windows 8.1 64-bit on my computer but doesn't get this issue. As you mentioned you reinstalled your PC, the first thing I suggest is to make sure your Windows and Office have been up to date.
The second thing is to make sure you are using the system with an administrator account, this ensures you the enough permission.
There is a possibility that some 3rd-party programs are interfering with "Mail", we can try to perform a clean boot to determine whether background programs are interfering with this:
1.Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click
Search.
2.Type msconfig in the search box, and then tap or click
msconfig.
3.On the Services tab of the System Configuration
dialog box, tap or click to select the Hide all Microsoft services
check box, and then tap or click Disable all.
4.On the Startup tab of the System Configuration
dialog box, tap or click Open Task Manager.
5.On the Startup tab in Task Manager, for each startup item, select the item and then click
Disable.
6.Close Task Manager.
7.On the Startup tab of the System Configuration
dialog box, tap or click OK, and then restart the computer.
If in clean boot the issue doesn't exist, the issue was probably caused by the 3rd-party programs. For further information to troubleshoot, you can refer to this kb below:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Host process rundll32 has stopped working while Installing BPC 7.5

Hi guys,
while installing BPC on Windows 2008 R2, the installation programs shows the message
Host process rundll32 has stopped working.
According to SAP Note 1498480 - Windows host process (Rundll32) has stopped working, i have followed the recommendations:
32bit Compatibility Mode ON
C:\inetpub\AdminScripts>cscript.exe adsutil.vbs set W3SVC/AppPools/Enable32BitAp
pOnWin64 "true"
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Enable32BitAppOnWin64 : (BOOLEAN) True
Also disabled the Data Execution Prevention (DEP) and rebooted server.
Then tried reinstalling IIS 7.0, rebooting the server, instaling it again but still showing the same error message.
Any futher help on this would be highly appreciated.
Regards!

After a few restarts it worked

"Host Process Rundll32 Has Stopped Working" on my new X200s

100% reproducible :
1. boot
2. log on
3. close lid
4. open lid
5. "Host Process Rundll32 Has Stopped Working"
I get this on my new X200s which is nearly in out-of-the-box condition. It runs Vista with SP1. I installed a few programs (Thunderbird, Chrome and OpenOffice) and configured it to do nothing when the lid closes.
I guess I'll try installing the Power Management driver update (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG) and then Vista SP2.
Any other ideas ?
Thanks,
Jean-Louis

The driver update did not help.
In the meantime I noticed that the power gauge vanishes from the task bar after the error message.
J-L

Windows Host Process Rundll32 has stopped working

Starting today, my computer pops up with this error every 10-15 min. for no reason. I've looked around for a solution, and I can't seem to find one. I don't have Nero or K-lite, so I assume they're not the issue. This is the text in the additional information
column:
Problem signature:
Problem Event Name: APPCRASH
Application Name: rundll32.exe
Application Version: 6.0.6000.16386
Application Timestamp: 4549b0e1
Fault Module Name: kernel32.dll
Fault Module Version: 6.0.6002.19034
Fault Module Timestamp: 52f2ec86
Exception Code: e06d7363
Exception Offset: 0003fd1e
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Additional Information 1: bc5c
Additional Information 2: 3faabc1f59aac9df000b2ecf4b3aca62
Additional Information 3: 7b81
Additional Information 4: dcca1a117a3ce8b0a26bec63063667e8
Any help would be greatly appreciated!

Hi,
What’s the result in Clean boot mode?
If this issue does not persists, I would suggest you check your applications.
If it still exists in Clean Boot mode, please run SFC command to fix system file.
Alex Zhao
TechNet Community Support

Rundll32 has stopped working

Started getting a pop up saying
Windows host process (Rundll32) has stopped working:
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   rundll32.exe
Application Version:   6.1.7600.16385
Application Timestamp:   4a5bc637
Fault Module Name:   KERNELBASE.dll
Fault Module Version:   6.1.7601.18409
Fault Module Timestamp:   53159a86
Exception Code:   e06d7363
Exception Offset:   0000c42d
OS Version:   6.1.7601.2.1.0.256.48
Locale ID:   1033
Additional Information 1:   0cef
Additional Information 2:   0cef2867b69253378c57a00afcc7dce5
Additional Information 3:   6f95
Additional Information 4:   6f9589fffc83069ca90980ddefae779f
I have already tried running
sfc /scannow via command line and it did not find any integrity violations. Haven't installed anything new on the machine either. Any thoughts on how to fix this? Rolling back the machine to a previous state is not an option as there is just too much
data on the machine that changes daily.

Hi LBJ,
When do you get this error,open a folder or run a program ?
1.First of all ,we should ensure that the Windows and the drivers has got the latest update.
2. If the error occurs when opening folders that contain video files, try this :
Open Control Panel > Folder Options > Always show Icons, Never Thumbnails
3.If this issue occured when you ran a program,I recommend you to reinstall the program.
4.If the issue persists ,I recommend you to try clean boot to have a check. If it does, the problematic software can be located by dichotomy. To perfcorm a clean boot:
How to perform a clean boot in Windows
https://support.microsoft.com/kb/929135?wa=wsignin1.0
Best regards

Web Kit 2 Web Process,exe has stopped working?What is this and how do I get rid of it.

Web Kit 2 Web Process,exe has stopped working? What is this and how do I get rid of it.

I am not a Windows user but I have found several useful links for you here:
https://encrypted.google.com/search?q=WebKit2WebProcess.exe&as_qdr=all&newwindow =1&num=100

I keep getting a pop-up WEBKIT 2 WEB PROCESS.exe has stopped working and then I can't do anything -- any suggestions as to how I can get rid of this one?

I keep getting a pop-up WEBKIT 2 WEB PROCESS.exe has stopped working and then I can't do anything -- any suggestions as to how I can get rid of this one?
but i using safari on windows7.

Uninstall Safari and reinstall:
Safari 5.1.7 for Windows - Support - Apple
If this doesn't work, I suggest migrating to a different browser given that: Farewell Windows Safari, as Apple excludes its homegrown browser ...

Web Kit 2 Web Process,exe has stopped working?What is this ...

Web Kit 2 Web Process,exe has stopped working?What is this and how do I fix it

I am not a Windows user but I have found several useful links for you here:
https://encrypted.google.com/search?q=WebKit2WebProcess.exe&as_qdr=all&newwindow =1&num=100

HOST APP SERVICE has stopped working

I keep getting the message "HOST APP SERVER has stopped working" whenever I try to select the home button on my screen. It simply says that Windows will close the application and notify me when a solution has been found, but this has been going
on for a week and it has yet to message me a solution. The error message isn't very specific as to what is going on and I have no idea what to do!

Hi kgabriella,
Please open Event Viewer and check the related logs, if possible, post the information here.
Further, follow the advice posted by Arnav Sharma, follow the guide to boot into clean boot and check the issue again.
Besides, see if the thread below would help:
Catalyst control centre host has stopped working.
Best regards
Michael Shao
TechNet Community Support

Webkit2 process.exe has stopped working

every time i load up facebook a pop up saying "webkit2 process.exe has stoppped working" comes up and wont go away

Delete Safari for Windows. Apple no longer supports it.
Apple apparently kills Windows PC support in Safari 6.0
If you don't want to use IE, use Chrome Browser

Catalyst Control Center: Host Application has stopped working (Error)

Hi, I have anHP Envy 14-1110nr Notebook PC, with Windows 7 64-bit, and Catalyst Control Center (To configure switchable graphics) doesn't work. I believe to be stuck on my low performance GPU,and can't switch. I cannot load anything to do with my switchable graphics, and am at a loss for what to do (I'm a very inexperienced computer user). I have browsed other forums related to this but am scared that I'll destroy my computer by downloading the wrong thing. This all started after I got a virus that caused me to need to reset my computer from an earlier stage, please help.

Hi,
Try using Recovery Manager to reinstall your AMD Graphics Driver - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Web Kit 2 Web Process,exe has stopped working?

From time to time pops up this message and i have-to close browser.How can i fix this?

http://store.apple.com/us/browse/home/shop_mac

Itunes has stopped working - quicktime will not open missing rundll32.exe

I have a Gateway computer with windows vista. When I try to open itunes I get the message that itunes has stopped working and windows will close. When I try to open quicktime in the control panel I get the message the windows host process (Rundll32) has stopped working. I can not uninstall quicktime. I have downloaded and installed itunes and quicktime many times but this does not help. Please someone help me. I am at wits end. How do other people have itunes working with windows vista?

Hey MrsBeth, it looks like your PC is on a network or something. I am uncomfortable giving advice since I don't know what's going on there.
What I am comfortable with is these directions below. Give yourself full control and ownership the the entire C: drive and all its subfolders. And temporarily turn off UAC for good measure - you can turn it back on after you've installed iTunes.
Let's cross our fingers that the install goes through!
How to Take Ownership and Grant Permissions in Windows Vista
How to Disable UAC

Webkit2 webprocess exe keeps saying it has stopped working. how do i fix this

My computer keeps popping up with this message, Webkit2 process Exe has stopped working! How do i fix this problem????

Denb15,
I wish the issue was going to be as easy to identify as a system rollout! I know you must be extremely worried about having a brand new phone acting this way. Do you get this error message every time you're on a phone call? What kinds of actions prompt the error to pop up and how often is it happening? Share details so we can help find a fix!
Also, Verizon Wireless does have a 14 day worry free guarantee time frame I want to make you aware of. You would be able to exchange your current Note 4 for another of the same make/model at no charge within that time frame. After the 14 days has been exceeded we can still replace the phone if we need to, but it would be with a Certified Like New Replacement. http://vz.to/1hJXRR0 .
SarahO_VZW
Follow us on Twitter @VZWSupport

"Host Process Rundll32 Has Stopped Working"

Similar Messages

Maybe you are looking for