Host server configuration

Hi
I would like to publish my blog which created with iweb.
My friend has a linux server and he gives my a domain but he want to know how to set up the server.
I didn't find asnwear of this question.
Could anybody send me a discription about the linux server configuration.
thanks

You friend has to inquire in the linux community to learn how to do that.
After he has learned it, he has to provide you with the information to publish to that server.
You need the serveraddress, username and password, and a pathname, if required.
While your friend is learning, you can practice on your own computer :
http://www.wyodor.net/Tutorials/iWebDemo/sFTP.html
iWeb is not involved.

Similar Messages

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

Windows Server 2012 The licensing mode for the Remote Desktop Session Host server is not configured

Hi
I have a standard Windows Server 2012 that is hosted in the cloud by a hosting provider -
This server has been up and running fir 6 months - recently we have been getting a warning
"The licensing mode for the Remote Desktop Session Host server is not configured" - The Remote Desktop Session Host server is within its grace period, but the RD Session Host server has not been configured with any license server.
Yet, we only use this with 2 connections as part of the standard licence agreement and this server is not used as a user's desktop only an ftp and web server- do therefore we do not need to purchase any cal licences (we have another server with the same
hosting company that does not have this issue and has been up for 18months)
Please can someone advise how I resolve this issue, the hosting company states that I must resolve it as they only host and resell the server licence
Thank-you
Richard Steele

Hi Richard,
You need to uninstall Remote desktop session host feature. After removing it, you will default two connections which does not need to purchase RD CALs'.
Thanks,
Umesh.S.K

The grace period for the Remote Desktop Session Host server has expired

I'm running Windows Server 2012, we only have 1 server and it's a DC. I'm trying to RD to the server from my Windows 7 laptop. It was working fine on Friday but when I came in on Monday I got message saying that 'The remote session was disconnnected
because there are no Remote Desktop License Servers available to provide a license'
So after a bit of digging I found out my 'grace period' had expired, so ordered a new license which I got today, installed this all ok but still i cannot connect via RD I get the same message....went into the RD License Diagnoser and it said the problem
was as follows
'The grace period for the Remote Desktop Session Host server has expired, but the RD Session Host server has not been configured with any license servers. Connections to the RD Session Host server will be denied unless a license server is configured for
the RD Session Host server.'
Suggested Resolution as follows
Configure a license server for the Remote Desktop Session Host server. If you have an existing license server, specify that license server for the RD Session Host Server. Otherwise, install RD Licensing on a computer on your network and Configure RD Session
Host Server to use it.'
I cannot figure out how to do this as I cannot find the RD Session Host Server tool.
Can any of you lovely people help me please

Hello,
Best option would be to assign the license server by using AD GPO. Youl will need to configure the following:
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
and define the settings for:
Use the specified Remote Desktop License Server
Set the Remote Desktop Licensing mode
Then assign the policy tho your server.
regards Robert Maijen

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

URL file-access is disabled in the server configuration

My hosting company has made a server config change and my xslt pages have stopped working with the following error.
It says url file access is disabled but my phpinfo() still shows allow_url_fopen = on
What else might be the problem?
Warning: require_once() [
function.require-once]: URL file-access is disabled in the server configuration in
/homepages/0/xxx/htdocs/xxxx/inc/horoscope_xml.php on line
3
Warning: require_once(
http://www.xxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php) [
function.require-once]: failed to open stream: no suitable wrapper could be found in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3

bikeman01 wrote:
I don't understand your use of the word 'class' in your reply - I am using php not asp.net.
The name of the file that you are trying to access is MM_XSLTransform.class.php. It is a PHP class created by Dreamweaver for the XSL Transformation server behavior.
The servers php is 5.2.11, as it has been for sometime, so I know that it previously worked with allow_url_fopen = on and allow_url_include = off
Judging from the error message, you are trying to include the file using a URL, rather than a file path:
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Change the URL to a file path:
require_once('/homepages/0/xxxx/htdocs/includes/MM_XSLTransform/MM_XSLTransform.class.php');
Is it possible for phpinfo() to show allow_url_fopen = on yet be actually off on the server?
No.
[Edited to correct name of server behavior]

Regd.UDDI server configuration in PI 7.1 and services registry

Hi ,
i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
I am using PI 7.1 and trying to taste the services registry flavour of it.
i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
i get a message that such a role doesnt exist at all.
Qn1:Do i need installed any software componet like UDDI etc, or do in need to have uddi server
configured for this , if yes how to do that..
I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
Qn2:How to configure UDDI server n PI 7.1
, any step by step guide which applies to PI 7.1 will help.
Qn3:What is the relation between tcode soamanager, services registry and UDDI
Qn4: I am not able to search my services in soamanager->business administration->WS administration
I have activated the services (Webservice Runtime)as mentioned in the Blog
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9

Thanks Raj,
This property specifies a URL for the host name of the *physical machine where the Discovery
API of the UDDI server is located.* Its value is set automatically by default.
I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
what may be the reason for not able to assign the above roles as per the sap note given above?
Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
accepted,i used my ID for configuration XI super user!
After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
it slaps me with this error
Com.sap.aii.ib.core.uddi.RegistryCleintException:
A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
But if i open Services registry i can see that service got published.when i test in WS navigatore it
gives 503 service unavailable error.
How to delete unused published services
. Initialy i took the wsdl URL generated from
disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
How to delete them?I can see any direct option
Regards,
Abhi

Newbie problems with getting a local CFB server configured

This started out in another post by me as to what I thought was a port 8500 problem. I had watched the getting started with CFB video, and on that he used localhost as a Server Name and as Host Name. He then assigned port 8500 as the WebServer Port.
When I do this it comes up in the Servers windows as Stopped. If I try to start it the error I get is
'Starting localhost' has encountered a problem
Ensure that the server is not already running or any application is not using the webserver port.
So as an experiment I changed the port to 80 because the admin page does work at http://127.0.0.1/CFIDE/administrator/index.cfm
The Server window at the bottom of the CFB screen then shows a Running server.
I create a small "Hello World" index.cfm page and when I hit one of of the browser tabs, Firefox and IE in my case, I get the following error,
Error while generating preview:
There is no server configured for the project myproject to which the file index.cfm belongs. Configure a server in ColdFusion in ColdFusion server settings before you proceed.
What am I missing ?
Thanks,
Dennis

You need to tell CFB what server CFB should use in order to preview the file.
So you need to associate a server with this Project. To do so, right click on Project -> Properties -> ColdFusion Server Settings.
Here from the dropdown of 'Servers' select the server that you added in CFB.
Once that is done, ensure that your project is in document root of the server which in your case could be the Inetpub\wwwroot.
Once this is done the preview should work.
-Bhakti!
Adobe ColdFusion Team

Server Configuration in Linux

hi...
I am trying to configure LC with weblogic in Linux... In application server configuration, i gave Host Name as the machine IP and port as 7001 but its throwing an error ALC-LCM-100-011... Application Server host or port may be invalid.
Please help me..
Thanks
Ambika

Can you post the full stacktrace?
Is your Admin server running/functioning? Are you able to log into it the WL Admin Console at that same IP and port?
True, 7001 is admin port which is what LCM expects.
LCM interacts with managed servers via the admin server.

Which Server Configuration When Installing

I am going to host a coldfusion database/server on
webhost4life.com , I paid them a little extra to do this and they
will set up most everything on their end. My question is this......
When first installing coldfusion mx 7 software on my laptop,
which of the three server configurations do I select during the
installation?
Server configuration,
Multiserver configuration,
or J2EE configuration
Thanks in advance.

A high level overview:
Standard is the basic, "one" use version. With standard you
can only
have one instance of CF running. Thus all websites configured
will use
the settings of this one instance. Unless you are running a
server OS
on your laptop, you can only create one website, thus the
standard is
probably sufficient.
Multi-home is as it says you can create multiple instances of
CF each
running with it's only settings. Then each instance can be
connected to
one or more websites. Thus a website will use the
configuration of the
instance CF to which it is assigned. There is more
configuration
involved in this, since CF is installed under a JRun
directory rather
then the other way around. This does add complexity which
could be
unnecessary for a workstation.
J2EE is for using alternate Java Engines other then the built
in Adobe
nee Macromedia JRun that the other setup use. Thus if you
have
Websphere or some other J2EE system, this would be for you,
again fairly
unusual on a common laptop.

Failed Job Query on Central Management Registered Servers - Host Server is not included in results

The following standard query works great for showing failed jobs on servers. Executing this in Central Management Registered Servers works as expected, but the Host Server results are not listed, and the same query needs to be executed against the host server
too.
e.g.
Registered Servers are defined on Server A
Results are displayed from servers B, C, D & E - but results are not displayed for Server A.
How do we receive results from Server A without having to execute a separate query ?
DECLARE @PreviousDate datetime
DECLARE @Year VARCHAR(4)
DECLARE @Month VARCHAR(2)
DECLARE @MonthPre VARCHAR(2)
DECLARE @Day VARCHAR(2)
DECLARE @DayPre VARCHAR(2)
DECLARE @FinalDate INT
-- Initialize Variables
SET @PreviousDate = DATEADD(dd, -7, GETDATE()) -- Last 7 days
SET @Year = DATEPART(yyyy, @PreviousDate)
SELECT @MonthPre = CONVERT(VARCHAR(2), DATEPART(mm, @PreviousDate))
SELECT @Month = RIGHT(CONVERT(VARCHAR, (@MonthPre + 1000000000)),2)
SELECT @DayPre = CONVERT(VARCHAR(2), DATEPART(dd, @PreviousDate))
SELECT @Day = RIGHT(CONVERT(VARCHAR, (@DayPre + 1000000000)),2)
SET @FinalDate = CAST(@Year + @Month + @Day AS INT)
-- Final Logic
SELECT j.[name],
s.step_name,
h.step_id,
h.step_name,
h.run_date,
h.run_time,
h.sql_severity,
h.message,
h.server
FROM msdb.dbo.sysjobhistory h
INNER JOIN msdb.dbo.sysjobs j
ON h.job_id = j.job_id
INNER JOIN msdb.dbo.sysjobsteps s
ON j.job_id = s.job_id
AND h.step_id = s.step_id
WHERE h.run_status = 0 -- Failure
AND h.run_date > @FinalDate
ORDER BY h.instance_id DESC
John

Hi vsla,
According to your description, I do a test. When I designate a Central Management Servers and create server groups, then execute statements against
multiple configuration targets simultaneously, it
indeed only contains the results of server groups, you need to execute again on the host server (Central Management Servers) then display the results of Central Management Servers, because the Central Management Server cannot be a member
of a group that it maintains.
If you want to get all servers results by executing the statement one time. I recommend you use Local Server Groups, create new register server and add all servers to the Local Server Groups, then right click “new query
“, execute the statements, it will display all results about all servers. There are more details about administering multiple servers using Central Management Servers, you can review the following article.http://technet.microsoft.com/en-us/library/bb895144
http://technet.microsoft.com/en-us/library/bb964743
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Asynchronous reserve finally failed: missing name server configuration

Hi,
can anybody give me a hint why we get these errors?
"asynchronous reserveFinally failed: missing name server configuration, no logon known -> operation will be retried name reservation : name server=http://sapcoe01.bbn.hp.com:50000/, category=SAP_DevelopmentComponentName, name=hp.com/appl/tax, reservationKey=63415681, state=FINALIZE_PENDING"
The development objects are listed in SLD with status PRERES. The Name Server location is configured in DTR with the logon data. The name server is also listed in the development configuration.
Where else could be the cause for this error?
Many thanks for any hints!

Hi Martin,
Here you can see the *_PENDING items: http://<host>:50000/dtr/sysconfig/support/NameReservationList
And here you can configure the name server: http://<host>:50000/dtr/system-tools/administration/NameServerConfiguration
The solution is to define your name server a second time with a slightly different URL. The first entry you already defined probably uses the fully qualified hostname, e.g. http://<host>.mycompany.com:50000/sld/cimom. Define the same name server again but without the domain and without the /sld/cimom path, e.g. http://<host>:50000/. Actually it should correspond to what's shown in the error message, e.g. "operation will be retried name reservation : name server=http://<host>:50000/,". When you click Save Configuration, the pending items in the queue will be processed. The only problem we have left is that "after some time" the 2nd entry we just defined dissapears and we need to configure it again (and again and again...)
Kind regards,
Sigiswald

Object Name / Name Server configuration

Hello community,
I am trying to grasp how to setup the name server configuration in the sld for use with JDI / NWDI.
What makes me wonder is that one has to provide a namespace prefix / object name in two different locations (NW04sSP09 / SR2):
1. sld -> Administration -> Section:Server Settings -> Object Name
2. sld -> Landscapes -> New Landscape... (type NWDI Systems) -> Add system to landscape -> New Hosted System ... (type SLD) -> Field "Object Server".
What is the difference between these two namespace settings?
I checked SAP Help, several SLD Guides, RKT Content, SAP Notes without finding a clear answer, sadly. I would really appreciate if someone could help clarifing this question.
Thanks
Kristian

Hi all,
short update: A test (NW04sSP9) showed that the input field for the object server name in (2) is not persisting the prefix information.
After restarting the SLD Server the field shows the prefix provided in (1).
Changing the name in (1) also updated the name of the input field Object Server in (2) after SLD server restart.
Problably the input field (2) ought to be read-only? Or is there a reason for write-mode I cannot find out?
Regards
Kristian

Cache server configuration

Hi,
 We have installed the content server quite long back and it is working fine. Now as part of plant rollout we are installing cache server for other locations. We have installed cache server. But We have few doubts in configuring. Can sombody has any material wrt cache server configuration (like SCMSHO,SCMSCA...) with screen shots.
prasanna

Hello,
find the below comments ,could be helpful for you.
Pre-Installation Checklist for the SAP Knowledge Warehouse
Cache server Softwere
 Windows NT 4.0 Server English ( SP 4 or 5)
 Windows NT Option Pack 4.0 with following components:
 IIS 4.0
 MS Data Access Components 1.5 (MDAC:ADO,ODBC and OLE DB) or higher
 MS Managemant Console
 NT Option Pack Common Files
 Transaction Server (TS Core Componennts)
 Windows Scripting Host (Windows Scripting Host Files)
 MS Proxy Server 2.0
 No non-SAP applications must be installed.
 TCP/IP - protocol
 RFC to the R/3 system must be possible
Cache Server Hardware
 Manufactured by a SAP hardware partner
 512 MB RAM
 2 x Pentium Pro 200 MHz or higher (no Alpha CPUs)
 Raid 1 for the operating system
 Raid 5 for the devspaces of the SAP DB (recommended: 72 GB available)
 Raid 1 for the logs of the SAP DB (at least 2 GB available, should not be on the same Raid like the Devspaces or the NT Page file)
 High performance SCSI controller
 Hostname must satisfy the requirements for R/3 -Installations
Regards,
Murali.S

Siebel 8.1.1.11 • Error in Siebel Server Configuration

Problem Description
Hi,
I'm trying to make the Siebel Server Configuration for a new Development Environment.
After completing the Siebel Configuration Wizard I am having the following error:
2021 2014-05-28 12:40:21 2014-05-28 12:40:21 -0300 00000004 001 003f 0001 09 srvrmgr 3672 2404 D:\Siebel\8.1.1.11.0\ses\siebsrvr\log\srvrmgr.log 8.1.1.11 [23030] ENU
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sccobjs.cpp (964) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (samisc.cpp (284) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sasess.cpp (399) err=2555932 sys=0) SBL-SCM-00028: Key not found
Please can guide me to solve this problem
Kind regards,
Christian
Error Codes
SBL-SCM-00028
Problem Category/Subcategory
Installation (installation of FPs, QFs, PSs, Product Certification & Supported Platforms)/Siebel Server
Uploaded Files
File: srvrmgr.log;srvrcfg.log

Siebel Name Server Backing File
8.1.1.11 [23030] ENU
1.2
BAkAAAAAAAA=
Persistence=partial
Type=empty
[/enterprises]
Type=empty
[/enterprises/FUSION_SES]
Type=empty
[/enterprises/FUSION_SES/servers]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Host]
Type=string
Value="fusion_server"
Length=26
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/ServerDesc]
Type=string
Value="Siebel Server Profile SIEBELSRVR FUSION"
Length=78
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Lang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncStartTime]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/Primarylang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncPlannedCompletion]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncEndTime]
Type=string
Value="000100"
Length=12
[/gateways]
Type=empty
[/gateways/default]
Type=empty
[/gateways/default/version]
Type=empty
[/gateways/default/version/VersionString]
Type=string
Value="8.1.1.11 SIA [23030] ESN"
Length=48
[/gateways/default/definition]
Type=empty
[/gateways/default/definition/name]
Persistence=full
Type=string
Value="default"
Length=14
[/gateways/default/definition/full name]
Persistence=full
Type=string
Value="Siebel Gateway"
Length=28
[/gateways/default/definition/description]
Persistence=full
Type=string
Value="Siebel Gateway Server"
Length=42
[/gateways/default/definition/enable state]
Persistence=full
Type=string
Value="enabled"
Length=14
[/gateways/default/definition/object id]
Persistence=full
Type=integer
Value=0
[/gateways/default/attributes]
Type=empty
[/gateways/default/attributes/UseDefault]
Type=string
Value="SBA_82"
Length=12
[/gateways/default/attributes/CreateDefault]
Type=string
Value="SBA_82"
Length=12

Host server configuration

Similar Messages

Maybe you are looking for