Host: Unable to load application configuration + wrong install version on download

i am using 64 bit windows 7 ... when unable to playing video, it redirects me to the adobe download pages to get flash player ... the page says i am about to download flashplayer for win7 64 bit, of 9MB approximately, but the file i get has name "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) and this file just wont install it ends with error message: HOST: Unable to load application configuration ...
By google i found also file install_flashplayer11x64_mssd_aih.exe (NOTE THE NUMBER 64) ... this file runs the install, i get the final screen saying "installation completed" but after clicking the "finish" button i get an error message saying "an error occured while sending a command to the program" ...
I am just getting mad ... its 3 days i am trying to figure aout this problem ...
i also tryed files as "install_flash_player_11_plugin.exe" , "install_flash_player_11_plugin.msi" , "install_flash_player_11_active_x.exe" and "install_flash_player_11_active_x.msi" ... those files actually proceeds with the install, but at the end, the videos are still not displaying ...
When i am checking the plugins statuses in my firefox addons manager, it says Shockwave Flash is all right ...
The precedent version of flash player was working just fine, i do not understand why you must make such a mess every 2 months ...
How do i get work this?

yes, the pages is http://get.adobe.com/flashplayer/
the page says:
Adobe Flash Player 11.3.300.257 (9.36 MB)
Your system: Windows 64-bit , English, Firefox
but when i click the "Download now" button i get the file named "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) which wont start and after few seconds i get the message "HOST: Unable to load application configuration"
but finaly i solved the problem ... i just installed the file found by google on some private page "install_flashplayer11x64_mssd_aih.exe" (NOTE THE NUMBER 64)
(the page is here: http://www.ziddu.com/download/16693235/install_flashplayer11x64_mssd_aih.exe.html)
and after that i disabled the protected mode of flashplayer by adding a line in the cfg file
the howto is here: http://forums.adobe.com/thread/1018071
i must say its quite shameful one must get this torture to have movies playing on websites ... this cant happen at open source stuf, at least not for 3 days ...
and being already here and complaining, i must say also (i hope some adobe emploee will read this) i am quite disgusted (and i believe not only me) by adobes bad habit to provide other software than flashplayer, when they include mcafee antivir into the install ...
it is literally taking the user as a stupid one ...
if i will need an antivir, i will look for it ...
i just hate when some society tries to infiltrete in my comp some crap software counting on possibility that at the download i will not pay enough attention
its just ridiculous and shameful behavior

Similar Messages

Unable to load application configuration?

All of a sudden, a couple of weeks ago, adobe flash stopped working in Internet Explorer 10. I've gone through all the steps I can find on the forum to try to get it
to load. I even uninstalled it and the plug in for firefox, but it still wouldn't download, even directly. The error message that boinks and shows up as the exe file is installing it is:
Unable to load application configuration.
I'm running windows 7 pro 64 bit, service pack 1
Internet Explorer 10, 10.0.9200.16635 v 10.0.7
Adobe Flash version is gone, now that I uninstalled it to try to install, but was trying to install the update that it alerted me to, that is version 11.8.800.94, I think.
I went away from IE when there was no adobe flash for 64 bit, but came back and have enjoyed it. I see others have had similar problems, seemingly around installing an update.
Thanks for anyone's help.

Download and run the offline installers from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (nder the heading Progress bar hangs...).

O2cb_ctl : unable to load cluster configuration file while RAC setup.

OCFS2: unable to load cluster configuration file
Hi,
I installed OCFS2 successfully.
I successfully install 3 RPMs.
I am getting error while running ocfs2console to do cluster configuration.
I tried to run this manully using "o2cb_ctl -C -n NODENAME -t node -a number=NODENUM -a ip_address=IPADDR -a ip_port=IPPORT -a cluster=CLUSTERNAME "
this commnd. but getting error as
"o2cb_ctl: Unable to access cluster service while creating node Could not add node "
Then I edited this file manually and copied to another nodes using SCP. Then tried to use o2cg_ctl utility as
# /etc/init.d/o2cb offline ocfs2
# /etc/init.d/o2cb unload
# /etc/init.d/o2cb configure
Configuring the O2CB driver.
Next, I configure /etc/ocfs2/cluster.conf:
cluster:
node_count = 2
name = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 1
name = ocvmrh2053
cluster = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 2
name = ocvmrh2051
cluster = oracle
Next, I try to load ocfs2 modules by command: o2cb load - everything messages is OK
And I try switch ocfs2 cluster to online (by o2cb online oracle), write this error message:
Starting cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
Stopping cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
I think both errors i get are due to same issue. Please kindly reply if anyone having idea.
Thanks.
Please anyone can help me to resolve this.
Message was edited by:
user596035

provide output of this command from all OCFS2 nodes:
ls -l /etc/ocfs2/cluster.conf
Regards,
Martin

Unable to load soa_infra after SOA Install

Hello,
SOA 11.1.1.5
I have installed RCU, WLS, SOA11G and created domain successfully. I can start Admin Server and SOA Server, but I can't see soa_infra in EM Console and
soa_infra component is also in failed status in Admin Server Components.
I am not finding anything much in logs.
Which log will give me the exact error for this issue? soa server log or soa server.out or soa_diagnostic log
Also, while creating domain under the 'Test JDBC Component Schema' all the below components test was successful:
SOA Infrastructure, User Messaging Service, OWSM MDS Schema, SOA MDS Scehma
Can anyone help me resolve this issue?
Thanks

I see below error in logs
####<Nov 5, 2012 10:42:39 PM PST> <Info> <Deployer> <servername> <SOA_DV06> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:-1f1dddb6:13ad463dca7:-8000-0000000000000be6> <1352184159575> <BEA-149059> <Module hw_services_wls_ejb.jar of application soa-infra is transitioning from STATE_NEW to STATE_PREPARED on server SOA_DV06.>
####<Nov 5, 2012 10:42:39 PM PST> <Error> <JMX> <servername> <SOA_DV06> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:-1f1dddb6:13ad463dca7:-8000-0000000000000be6> <1352184159575> <BEA-149500> <An exception occurred while registering the MBean null.
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : com.bea:ServerRuntime=SOA_DV06,Name=hw_services_wls_ejb.jar,ApplicationRuntime=soa-infra,Type=EJBComponentRuntime new:EJBComponentRuntimeMBean: name=hw_services_wls_ejb.jar existing EJBComponentRuntimeMBean: name=hw_services_wls_ejb.jar
     at weblogic.management.jmx.ObjectNameManagerBase.registerObject(ObjectNameManagerBase.java:168)
     at weblogic.management.mbeanservers.internal.WLSObjectNameManager.lookupObjectName(WLSObjectNameManager.java:131)
     at weblogic.management.jmx.modelmbean.WLSModelMBeanFactory.registerWLSModelMBean(WLSModelMBeanFactory.java:87)
     at weblogic.management.mbeanservers.internal.RuntimeMBeanAgent$1.registered(RuntimeMBeanAgent.java:105)
     at weblogic.management.provider.core.RegistrationManagerBase.invokeRegistrationHandlers(RegistrationManagerBase.java:180)
     at weblogic.management.provider.core.RegistrationManagerBase.register(RegistrationManagerBase.java:111)
     at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:317)
     at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:255)
     at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:221)
     at weblogic.j2ee.ComponentRuntimeMBeanImpl.<init>(ComponentRuntimeMBeanImpl.java:76)
     at weblogic.ejb.container.internal.EJBComponentRuntimeMBeanImpl.<init>(EJBComponentRuntimeMBeanImpl.java:40)
     at weblogic.ejb.container.deployer.EJBModule.initMBeans(EJBModule.java:245)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:395)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)

Unable to load bleck berry 10 OS version 10.3.1.1565

Hi,
I tried at least four time to update the OS with the new 10.3.1.1565. each time after reaching the 99% of the second phase of installation the udate is stopped.
I tried directly on the phone, from Black Berry Link and also from the web...no way to install it.
Do anybody have a suggestion?
I leave in Italy...I don't know if this can help.
Thanks
Anna

I have seen mention that it has taken a few hours to complete the difference from 98 or 99% to 100%, and I have also read posts from members who reported no completion after hours and hours.
Here is my advice: There are many problems with this upgrade that are being discovered by users. If you can wait, that might be a good idea, until problems are resolved.
If you don't want to wait, those I trust are recommending a clean install using an autoloader because of the numerous problems with upgrades via Link and OTA. Search on autoloader and see the sticky thread on the topic.
Also, know that an autoloader deletes all user data. Do a backup.
- Ira

ITunes will not load now I have installed version 8.0!

Well, I updated iTunes to the 8.0 version and now it comes up everytime wil the 'windows is gathering information' window and it installs then it comes up with 'you must restart your computer for itunes to take effect.' & i have restarted it! But it comes up with this message everytime!!! & now I can't use itunes at all!!!! someone please help!!!!

The only way that I got itunes to open was uninstall itunes and reinstall. At the end of the fresh install I selected start itunes when finished installing. itunes opens and works fine until I colse it and try to reopen it. Then it does back to the beginning of this thread, trying to install.

Live Update showing wrong installed version of driver

Hi, I have the latest Intel ME driver (10.0.31.100) installed. But live app showing that I have the 10.0.0.124 version and suggesting to download the latest one. I'm just ignoring the warning but why is this not corrected since I have this problem at t...

Quote from: JLio01 on Today at 02:43:02Have you tried click on "Ask for support" and contact msi the reason being denied?
I know why it's being denied. What I have an issue with is MSI seemingly being the ...

Re: Live Update showing wrong installed version of driver

try with other version off live update, i got that problem too

Hi
As for Intel ME, ask MSi techs as they should tell whats the issue (database might not be updated?): >>How to contact MSI.<<
As for Killer, correct: just driver is much smaler than driver+...

Phsp CS3 - License has stopped working - How to access new install version for download?

Please help! I just finished a session with Adobe and they told me to use the Forums for a solution to my issue.
Bought a new iMac with Mavericks OS/X. Photoshop CS3 will not open due to a "license has stopped working" error message. I asked the Adobe support person for a link to download a replacement copy and he gave me a link that gives a 404 error on the Mac dmg download page,. I am ready to install PS CS3 but first need to have a usable dmg download link. The tech support person assured me that experts on this forum can help. My question is WHY did he send me to a non-working link?
Thanks for any advice you can give that really works! :-D

I get the "License has stopped working" mesages too.
We have a MacbookPro at home. There are two user-acounts on this mac, one for my wife and one for myself. This way we keep our personal stuff (e-mail, files, settings, dropbox, desktop clutter etc) separated. "Fast user switching" is enabled to easily switch to your personal account.
Now when I open Photoshop I might get the dreaded "License has stopped working" message. This will happen if Photoshop is left open in her account. So I'll have to log into her account, close Photoshop, go back into my own acount and open Photoshop again.
I should not get this message since Photoshop is not part of a particular user account, it is installed in the "Applications" folder which is accesible to all users.
What makes it even more annoying is that I get the "License has stopped working" message on trying to open Photoshop even when Photoshop is closed in in the other acount, but Illustrator is opened.
This makes no sense since we bought Photoshop and Illustrator CS3 as separate programs, not as a part of the Creative Suite.
I did not report this to Adobe yet but it wil do that now.

Cs6 bridge unable to load

unable to load CS6 Bridge

i already install and downloaded CS6
i trying to launch Bridge after installation but it not loading no error no page coming out.
OS? Window 7
I call into adobe help but they are not helping at all, saying email not registered window serial number wrong, if wrong how can i have install the software, know what the problem to call in for help......

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.

u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

SSO Application Configuration .msc - Unable to load mmc and unable to uninstall/repair

This tool was installed on a QA server by an ex-employee and nobody knows for sure if it ever worked. Attempting to uninstall/repair fails with below errors in the event log.
The description for Event ID 11001 from source MsiInstaller cannot be found. Either the component that raises this event is not installed on your local computer
or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Product: SSO Application Configuration -- Error 1001. Error 1001. Company Name is a required field.
(NULL)
(NULL)
(NULL)
(NULL)
The description for Event ID 11001 from source MsiInstaller cannot be found. Either the component that raises this event is not installed on your local computer
or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Product: SSO Application Configuration -- Error 1001. Error 1001. An exception occurred while uninstalling. This exception will be ignored and the uninstall will
continue. However, the application might not be fully uninstalled after the uninstall is complete. -->
Cannot delete a subkey tree because the subkey does not exist.
(NULL)
(NULL)
(NULL)
(NULL)
The tool is currently unusable. And worse, we cannot uninstall and re-install this tool. Please advise.

Hi,
Sadly i had the same issue trying to uninstall the SSO App Con...
I also could not repair the install due to another 1001 error.
Instead of uninstalling the program i found the registry file i needed to repair the install and imported it to my registry.
1 Open notepad and paste the following
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MMC\SnapIns\FX:{ce255ef6-9e3d-42c8-b725-95ccc761b9d9}]
"UseCustomHelp"=dword:00000000
"Type"="Microsoft.ManagementConsole.Samples.ActionsSnapIn, SSOMMCSnapIn, Version=1.5.0.0, Culture=neutral, PublicKeyToken=null"
"ApplicationBase"="C:\\Program Files (x86)\\Microsoft Services\\SSO Application Configuration"
"ConfigurationFile"="SSOMMCSnapIn.dll.config"
"NameString"="SSO Application Configuration"
"Description"="Allows a BizTalk Administrator to Configure the SSO Configuration Store"
"Provider"="Microsoft"
"ModuleName"="SSOMMCSnapIn.dll"
"AssemblyName"="SSOMMCSnapIn"
"RuntimeVersion"="v2.0.50727"
"FxVersion"="3.0.0.0"
"About"="{00000000-0000-0000-0000-000000000000}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MMC\SnapIns\FX:{ce255ef6-9e3d-42c8-b725-95ccc761b9d9}\NodeTypes]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MMC\SnapIns\FX:{ce255ef6-9e3d-42c8-b725-95ccc761b9d9}\Standalone]
2 Save file as .reg
3 Open regedit.exe and import the saved <filename.reg>
This should allow you to use the SSO App Conf.. again.
I hope this helped.

JavaFX application deployment problem - Error: Unable to load resource

I am developing my first JavaFX application. When I install the jnlp and jar files on my web server I have no problems using the application from either my development machine (Windows XP) or my test machines (Windows XP & Mac OS X). However, one person evaluating the application reports getting the following error:
Error: Unable to load resource: http://dl.javafx.com/1.3/javafx-rt-windows-i586__V1.3.0_b412.jar
What are the possible causes of this problem and how can they be resolved?

If being able to redistribute the JavaFX runtime is important to you, make sure you let Oracle know. Personally I'd prefer to host it myself or bundle it with an application installer. Being forced to rely on dl.javafx.com isn't acceptable for me.
[http://javafx.uservoice.com/forums/33584-official-javafx-feedback-forum/suggestions/403105-allow-us-to-distribute-the-javafx-runtime-binary?ref=title]
Edited by: jptech on Jun 18, 2010 8:36 PM

"open project was cancelled or the application was unable to load database for..."

I'm doing a project for my Professional Writing course and I
have to use RoboHelp to create an online help document. The
professor provided templates for us to use but when I go to open
the project file I get the following error: "open project was
cancelled or the application was unable to load database
for....(then the directory)"
I know the project file isn't corrupted because the members
of my class are using the same one without issue. I tried
re-downloading the file, I also re-installed the program itself,
still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
The only other suggestions I have seen are that I don't have
edit perms for the system, but it's my personal laptop and I have
full admin privs. I thought at first that the folder was read-only,
but when I opened it up all it displays is the little green box in
the checkbox (which doesn't mean the folder is read-only, it's just
some stupid windows default, it's only read-only if the box is
actually checked). I tried making the entire directory read-only
and then turn it off but still get the same error.
Any suggestions?

There's a topic on my site about Opening Projects that
includes the method of deleting the CPD and XPJ files but I didn't
cover that as the project is good for everyone else. Anything is
worth a try at the moment though.
Another thing to try is to rename the course folder, then
create a new folder with the same name plus all sub folders. Then
move the files across. That will ensure the folder properties are
good and not read only. Yes I know what you said but again anything
is worth a try.
Also, in the last post you are saying the directory is not
read-only. I assume the files are all good?
Ref my previous post, is it the case that now you are getting
an error before the original error would have popped up?

Host: Unable to load application configuration + wrong install version on download

Similar Messages

Maybe you are looking for