Hostid change on reboot causes zpool failure to load

Seems every time I restart my Solaris 11 Express PVM the hostid is regenerated thus causing a failure for zfs to load pool 'tank'
zfs: [ID 427000 kern.warning] WARNING: pool 'tank' could not be loaded as it was last accessed by another system (host: solaris hostid: 0x45edf6). See: http://www.sun.com/msg/ZFS-8000-EY
(note: unable to locate msg/ZFS-8000-EY on oracle.com)
'zpool import -f pool' works, but I don't want to hack the service manifests to make this automatically import on reboot.
dom0
Oracle VM server release 2.2.1
Linux <hostname> 2.6.18-128.2.1.4.25.el5xen #1 SMP Tue Mar 23 12:43:27 EDT 2010 i686 i686 i386 GNU/Linux
domU
SunOS solaris 5.11 snv_151a i86pc i386 i86xpv Solaris

Seems like modifying vm config using Oracle Virtual Manager GUI insists on inserting the following line in vm.cfg (as well as deleting my 'phy:' lines):
vif_other_config = []
Problem of 'hostid changing on reboot' persists even after manually removing the above line and using the running vm.cfg is as follows:
cpu_weight = 512
disk = ['file:/var/ovs/mount/A1E890DD6BE34CFF9CB69BCA47ACB4D3/running_pool/sx11/System.img,xvda,w',
'phy:/dev/c7t1,xvdb,w',
'phy:/dev/c7t2,xvdc,w',
'phy:/dev/c7t3,xvdd,w',
'phy:/dev/c7t4,xvde,w',
'phy:/dev/c7t5,xvdf,w',
'phy:/dev/c7t6,xvdg,w',
'phy:/dev/c7t7,xvdh,w',
extra = '/platform/i86xpv/kernel/amd64/unix -B zfs-bootfs=rpool/ROOT/solaris,bootpath=/xpvd/xdf@51712:a'
kernel = '/var/ovs/mount/A1E890DD6BE34CFF9CB69BCA47ACB4D3/iso_pool/be/sol-11-exp-201011-text-x86/unix'
memory = 4096
name = 'sx11'
ramdisk = '/var/ovs/mount/A1E890DD6BE34CFF9CB69BCA47ACB4D3/iso_pool/be/sol-11-exp-201011-text-x86/boot_archive'
uuid = 'd56c89ef-ef4b-40e8-8d68-2a64c86d5f12'
vcpus = 6
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=oracle']
vif = ['bridge=xenbr0,mac=00:16:3E:7A:7F:BF,type=netfront',
'bridge=xenbr1,mac=00:16:3E:4E:2D:1A,type=netfront',
]

Similar Messages

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

Rebooting caused iPhoto to reset to defaults and erase all my photos

After installing the latest release in December, I had a problem with my Mail account disappearing after a reboot. This week I needed to reboot again and iPhoto started up asking if I wanted it as the default app for my camera (it had noticed my SD card in the reader). At the same time my photo wallpaper disappeared along with a couple desktop icons. Not being careful about the implications, I hit the OK button for iPhoto to start up. When it opened all my previous images (several hundred) were all gone. A search produced nothing. Why would the app erase previous data like that? Of course I hadn't backed up any of the recent images. Apparently, along with Mail, this new OS release is causing the system configs to be changed on reboot. Any ideas on trying to find my missing images? Or why the application behaves this way on startup?

ProfJB
Welcome to the Apple Discussions.
Are you sure the pics are actually gone? Have a look in your Pictures folder for the iPhoto Library Folder. Inside that you'll see a folder called Originals. Are your pics in there, in their Roll Folders?
If so, then you've got a corrupted database file:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

3rd Part Menory Causes Fan Failure

Bought my MBP about 9 months ago and shortly thereafter installed a 1G Ram Module from OWC. 2 Weeks ago my Right hand side fan statred making an awfull racket and then dies. Contacted Apple who had me send it to them. Received my computer last nite. Now remember the only thing wrong with this MBP was the fan. The Hardware Test (Short/Long) run from Disk 1 showed only a Fan Problem. No Memory, Mother Board, Etc. I received the computer back with the Main Logic Board Replaced, Disk Drive Slicked, Memory in a plastic Bag. And the MBP is unusable as received from Apple. Screen goes black, locks up, etc. Tried Reinstalling OSX and it would not complete. I sent about 5 hours on the phone with Apple Tech Support on receiving my MBP back in worse condition than it was sent in for. After going around and around with Apple I got a good tech who said it was a definit hardware issue (Others wanted to first buy Apple-Care for 359 or a 49 version) but since its still falls within one year and also 90 day warrenty if Apple Screwed it up I refused. Finally it will be sent back in to "HOPEFULLY" be fixed this time! Anyways, enogh venting and back to the original question; "Will A Ram Module Cause A Failure To A Fan?" Just one fan by the way the left one worked but upon return they said they replaced both. Thanks for allowing me to vent!! Hopefully this is a fluke on Apple Support since I really miss my Laptop right now!!
Bill......
MBP Mac OS X (10.4.8)

Thanks for the response. Yes I am or was using SMC Fan Control along with iStat in the Dash for moniotring. I work with a lot of PC's and have built my own from MB and Up. Since I am fairly new to Mac but in all my years I have never heard of Memory causing a failure of a Fan. I could as you said believe Kernel Panics or Programs screwing up or reboots for that matter. My assumption is that they did not like the OWC Memory or the addition of Non-Apple Memory. I also find it hard to believe my Main Logic Board all of a sudden (In the Apple Techs Hands) went bad. I can understand maybe the drive being slicked and fans switched in-pairs. But the rest I find really off the wall. I just hope that they can correct the problems right this time since I have been hyping my MBP since I got it and now this is a real show-stopper for me!
Bill......

RMMR1MRS-When run in background cause update failure errors looking

hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.

Have you found a solution already? If so, please, share it with the community and close this thread.

A seeming small change by Verizon causes major monetary and unrecoverable damages

A seeming small change by Verizon causes major monetary and unrecoverable damages
Back, I think in March or so, Verizon changed how they bill. Prior to this time frame my elderly mom paid the phone bill and I paid the DSL bill. The DSL bill came on my name and I paid by credit card and the phone bill came under her name and she paid by direct debit. She will not use a computer.
So, they make both bills on her name and won't change it. They did, however, allow the payment from my credit card.
The first unfortunate consequence was the internet speed suddenly dropped in speed by a factor of 2 to 1.5/364 and it did take me probably a month to notice it. NO ONE that I called was able to find the problem. It took multiple attempts until some bright “call in technician” said the problem is on their end and could be fixed in software. Thus, I believe, because of the name change, the provision changed too. The phone line crapped out too at this time.
The troubleshooting was stupid too. I took another modem and connected it directly to the NID and directly to the laptop and the technician on the phone said, it's either in your house or your modem and wanted to send me a new modem which they did. I don' get it. This is the wrong conclusion.
This shows the need of modems like Westell 2200 and the Westell 6100 because of the ability to measure line statistics and provisioned data rates.
Verizon sent me a D-link model DSL-2750B modem which I have to return because its just plain old stupid. It boasts Wireless n and the wired ports are 10/100. What's up with that? Next, there are no line stats and a horrible interface, akin to Verizon's website. Still can't figure out how to put it in Bridge mode. I own a D-link repeater and the interface is fine.
I asked them what modem they would send me and they would not tell me, so I got whatever piece of junk they had lying around.
I have now purchased a Network RAID array with no wireless access and with ~400 mb/s access rates. Yep, really stupid router.
Because of the number of outages, I have to be able to quickly switch from a bridge connected modem, Westel 6100) to one that is connected in direct mode, a Westell 2200 It's almost easy, but not quite, since the equipment is up in the rafters in the laundry room. The DSL cable is commercial terminated CAT5, which is rare. The modem is within 6' of the NID.
Plans include, the ability to switch the DSL line with a switch with positions for Modem #1 (Bridge), Modem #2(Wired), #3(RJ11 – Normal wiring) and #4: RJ-11 (Reverse wiring) and moving the direct connect jack for easy access. In any event, testing with the DSL modem at the NID is the gold standard.
In progress, is a 48 port Gigabit patch panel for phone and Ethernet, A separate 24 port RED patch panel will be bridged for phone.
I have already upgraded my network infrastructure to include a UPS for the network infrastructure and POE (Power over Ethernet) for the DSL modem. The UPS backup does not backup a repeater although it may in the future.
Now, let's go back to this seeming innocuous billing change.
So, this constant having to access the modem in the alternate configuration and a medical condition (migraines) that makes it hard to think clearly. So, in one of these episodes, I placed my laptop on top a container that was soaking laundry.
So, the LCD screen has to be replaced at $300 and the battery had to be replaced. Then the Ethernet cord to the modem got pulled and caused the laptop to fall on the floor. It worked for a few weeks and then suffered an UNRECOVERABE hard drive crash.
During this time frame, in fact over a 2 day period. My mom ended up in the hospital and to a rehab facility. My car ended up staying in the shop for a few days because of parts unavailability. My hard drive crashed and their was water in the basement. I don't have time for this.
Recovery would have cost $2004.00, if it were possible. I only have a drive image from 2011 which I have yet to try to use. I' now running UBUNTU Live rather than Windows 7 Pro. Some of the very important stuff was backed up on Flash, but a lot of stuff is gone forever.
Plans are to contact the billing office and the attorney general's office in the state where billing questions need to be resolved.
The last outage, fixed on July 27, was flagged as a phone outage by Verizon, when 18 routers supposedly died. 18 routers suspiciously means that they they were not adequately protected against surges. Verizon should look at the way DelMarVa Power reports outages: see: Delmarva, Put the usual World Wide Web Prefix and the COMercial domain suffix
For god's sake, quit making the website circular. I though Yahoo was the expert in that. I never visit Verizon's website unless there are problems. I mistaking thought I could find outage information, say using my phone's browser. This time I had to purchase service from CLEAR internet to ride me through this fix.
I know, you can't fix stupid and you can always find a better idiot. Comcast is looking more attractive.
Compensation of or my loss I will probably never get, but maybe with the help of the attorney general I can get the billing fixed. I do have power of attorney. Now, of course, the name the Verizon Website addresses me as is not right on this forum.
All, basically because of Verizon's unreliable network, incompetent people and the lack of maintenance of copper lines. The problem is, “We have little choice”. Currently, we need traditional land-line service to support an Emergency Response system. It's unclear whether digital phone lines support Faxes and alarm monitoring reliably.
I'll bet that there is NO WAY to tell Verizon if a service address as special needs like Emergency Medical reporting via phone or Internet, so that priorities for repair can be done properly. Utilities have that capability. Those ares with people with oxygen generators or other medical equipment get a higher priority,

That should not be happening. I sympathize with both of you (you and the the person who strated this thread). That sounds like the reason I would never want Dish.
I am fortunate that my service with Verizon Fios has been very reliable and that I haven't had too many issues over the years. But don't get me started on Verizon Wireless. I am through with doing any more business with them once my cell phone minutes run out. I love it when they say they have done everything the could to investigate such a simple issue with running my debit card transaction wrong and blaming it on my bank, i.e. running it through as a "debit" when I choose "credit" all of a sudden now two times in a row after 4 years of doing it right as "credit". And now they consider the issue closed on their end when nothing has been resolved. That's no way to treat a long time customer and I really felt treated like I was a bother to them. It's not like I ever paid them much money for this pre-paid cell phone service that I have used infrequently but I was really mad at the way they just wrote this off and pretty much told me "too bad". Talk about "customer non-service". It's also very hard to track the number of minutes left on my balance. I'm due for an upgrade anyway. I want to switch to the I-Phone from this flip phone but never again with Verizon Wireless. T-Mobile is way more attractive. Verizon Wireless is not only an entity separatedfrom Fios but it's definitely a much different animal and their customer service has really gone downhill. When you're treated like they don't care, it's maddening.
My customer service experience with Fios overall has been far superior to that most of the time. My setup is simple and even though there are some people who will inevitably complain about anything just to vent, I definitely believe at least some of what is posted here. And switching TV, phone, and Internet providers is a lot more involved than switching a cell phone provider.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side?

The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side? Also the the Mozilla Firefox tab on the upper left hand corner changed.
Its was a red colored tab and now its blue in color. I did not change any thing!

Hey jimmiet,
There were some recent ui changes around the downloads manager. What version where you on before? Anyway, you can customize things in Firefox really easily. Take a look at [[Customize Firefox controls, buttons and toolbars|this article on customizing Firefox]] for details. Should be a piece of cake to move the bookmarks button.
As for the color of the button, you might be in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing]] mode. That changes the color of the button from orange to a purplish color.
Matt

Step failure causes sequence failure Option

Hi !
I need some clarification about the Step failure causes sequence failure Option , I'm using TS 4.2 Under Win XP .
Lets say i have a Seq with 4 steps in all of then Step failure causes sequence failure Option is Checked .
Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? and will it record the result for this steps ?
Thank U .
Kobi Kalif
Software Engineer

Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? YES
and will it record the result for this steps ? YES
What this is signifying, is if a Step fails then when the Sequence has completed and returned back to the caller the status of this step will be FAILED.
If you need to jump to Cleanup then you will need to set the Post Action.
regards
Ray Farmer
Regards
Ray Farmer

Raw device owners change after reboot the server

The raw device owner change after reboot the server. i have to adjust it manually like
chown oracle:oinstall /dev/raw/raw*
any idea to make it permanent after bouncing the Server?
MY OS is RHEL4 & Rdbms 10.2.0.1

I got my answer .
New to Linex. Need suggestions...
How i can create new file ? like i want to create file oracle.permission
should i use this command
touch <filename> or any other command?
second i want to put these entries raw device 3, 6,7,10,11 etc
shoud it work ? like in the oracle.permission directory?
# ASM
raw/raw[3671011]:oracle:dba:0660

I was an Exchange student in the USA and I had a American Credit card. It expired, now back in the Netherlands I found out I still need to pay some bills. But I can't change credit cards, cause I'm not in the USA anymore

Yeah, so I had a American credit card from bank of America, and I closed my bank account before I left the country.
When I came home I found out I still need to pay like $2.00 but I can't change the country cause I need to pay my bill first,
but I can't because I don't own a American credit card anymore... what do I do??

Contact a friend in the USA and have them mail to you a cheap US iTunes Gift Card that you can redeem in your US account. Or, if a friend has an iTunes account, they can use the iTunes app on a Mac or PC to buy a cheap electronic gift certificate for you. The second option would be faster.

Portcost value changes after reboot on Cat OS

here is the command on my switch
set spantree portcost 3/1-48 3019
after reboot have noticed many times.. the value changes to someother random value..
Can any one explain whats the reason behind this..
Thanks.
Mahesh.

Hi Mahesh,
Howdy!!
Can you please confirm that after reboot there is a change in path cost of port cost. As you have manually configured the port cost is should not change for that switchport but yes path cost may change after reboot as switch may found some other best path to reach the root bridge. All depends on topology and your network design.
Just want to confirm when the switch is rebooted does the value you have configured in the command changes in your config or you are checking this with a "sh spantree" command?
Regards,
Ankur

I purchased the Microsoft Office last September at an Apple Store. I recently had to bring my MacBook Pro back to the store because of some issues. Reboot caused me to lose Office and I no longer have the passcode. Where can I find my duplicate code?

I purchased the Microsoft Office last September at an Apple Store. I recently had to bring my MacBook Pro back to the store because of some issues. Reboot caused me to lose Office and I no longer have the passcode. Where can I find my duplicate code? I no longer have the receipt so I can not call the business to find my duplicate code. Looking back at my bank statements, this purchase was quite spendy so I hope I will not have to purchase it again if possible! Any advice would be great!

It should be on a stickerthat says product key on the inner sleeve inside the bos which the disc comes in.

Microsoft Windows CPU OID changes between reboots

On my ACE4710s I'm using least-loaded predictors monitoring Microsoft Windows CPU usage. There are times when the MS Windows CPU OIDs can change between reboots. Is anyone aware of a way for the ACE to automatically adjust to the new CPU OIDs and continue to get accurate CPU usage values?

Hi Chuck,
I don't think that is possible. You need to know OID's before you configure them. You can configure multiple OID's but still you need to know them. If they are changing after reboot i don't think ACE can anyway know about it.
Regards,
Kanwal

Error while loading services: Failure in Loader: VerifyError: Error #1014

I have a library that, after it loads, I see this error in the console:
Failure in Loader: VerifyError: Error #1014: Class mx.collections::ArrayCollection could not be found.
I had the same problem with another library, except it had a problem with IToken. I got around this problem by changing the default linkage of libraries in build path from external to merge into code. That did not work this time.
Merging Flex libraries into service libraries does not seem to be anything close to the correct way to deal with this. Besides, it didn't some the problem every time.
What is the best way to keep these sorts of dependency errors from arising? The RSLs are included with Web apps, but not with libraries.

I have found what happened.
I created a library and created a data model within it. I created some entities within the data model. Some of those entities had collections as properties. I created the ActionScript code for the model and the collections were ArrayCollections. I moved the interfaces of the created code to a separate library.
The interfaces need to be changed from using ArrayCollection to IList. I knew enough about that to change it for the service I was trying to bring into my application. I missed another interface that had ArrayCollections as properties and that caused the error.
After cleaning up all of the ArrayCollection references from the interface library my service loaded.
The Hello Gravity video tutorial has a very good explanation on why specific implementations of Flex classes are not used in service interfaces: http://blogs.adobe.com/gravity/2011/09/09/hellogravity-sample-application/

Hostid change on reboot causes zpool failure to load

Similar Messages

Maybe you are looking for