Hosting company does not support SQL query with OUTFILE clause

From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database. Unfortunately, I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
Thanks. George

Maybe this external Export Mysql data to CSV - PHP tutorial will be of help
Cheers,
Günter

Similar Messages

TestStand Open SQL Statement does not support SQL's ORDER BY clause???

TestStand 1.0.3
Windows 2000 SP1
SQL Server 2000 Personal
You've got to be kidding me...
It appears that the built-in TestStand Open SQL Step does NOT support the
"ORDER BY" clause in the SELECT statement, even though the documentation
says it does. Is this true?
I have an Open SQL Statement query:
"SELECT * FROM [MyTable] WHERE ([Batch ID]=1234)"
it works fine, returning a correct record count 120 records. If I change
the Open SQL Statement query simply by adding an ORDER BY clause, such as:
"SELECT * FROM [MyTable] WHERE ([Batch ID]=1234) ORDER BY [MyField] ASC"
it returns a record count of zero. I know that "MyField" exists in the
MyTable table and contains valid data. The
second query works fine in SQL
Server Enterprise Manager.
Am I missing something? Is it true that the TestStand Open SQL Step does
NOT support the "ORDER BY" clause? If not, what &#$!ing good is it and why
does the manual state it is supported? Is there any other way using just
the TestStand steps to order a database recordset on one or more fields?
Any help would be appreciated.
Grrrrr....
Bob Rafuse
Etec Inc.

> Bob -
> The database step types do not do anything special to the SQL command
> that you give it. The step just passes the command to the ADO
> provider. I tried a simple query using the step types with the
> following command,
>
> "SELECT UUT_RESULT.* FROM UUT_RESULT WHERE ([UUT_SERIAL_NUMBER] =
> 12345) ORDER BY [EXECUTION_TIME] ASC"
>
> and this return the expected results and the record count parameter
> was as expected. I tried this on TS 1.0.2 and TS 2.0 with MS Access
> 2000 and MS SQL Server 7.0. I do not have MS SQL Server 2000 at this
> time.
>
> It would be surprised if the step types are messing something up.
I've been doing some experimenting over the past couple of days. Simple,
one-table queries seem to handle the ORDER BY clause fine. Th
ings seem to
get messed up when I try multi-table queries with ORDER BY clause with the
TestStand database steps. I get no errors but the returned record counts
are always 0 with the ORDER BY and positive without the ORDER BY. The exact
same queries work fine in Visual Basic/ADO and the SQL Server Query
Analyzer.
> Questions:
> 1. Have you verified whether the data is actually returned even though
> the record count is zero?
Hmmm... yes data IS getting returned (at least on the two instances I just
checked), but the record count is always zero. I was not proceeding with
processing if the record count was 0.
Still... I don't know how to loop through the recordset without knowing how
many records there are an not eventually generate an error by passing EOF.
Is there another way using the TestStand database steps to determine a) the
number of records in the recordset or b) when I'm at EOF?
> 2. Are you using any advanced options on the Opend SQL Statement step
> type, specifically
the cursor type set to forward only? Forward only
> cursors do not allow for record counts.
Everything on the Advanced tab of the Open SQL Statement step is set to "Use
Default".
Bob.

Transact-SQL debugger not working in SQL Server 2008: "...debugger does not support SQL Server 2005 or earlier..."

I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?

Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang

The Report Designer does not support this query drill down colum

Iam working On BI7 When iam doing report desingner when iam opening query through data provider
Iam getting thsi error The Report Designer does not support this query drill down colum colum axis may contain one structure only remove additional dimensions
I modify the cube and i remove some dimensions also My problem is when iam putting characterstics in Colums Iam getting this error When iam removing that charcterstics from colums it was not throuing any error
Chaitanya

hi,
report designer is for front end view design and the designcan be done with restriction to navigation.
you have dynamic and static report designs with restricted navigations.
chk the links for document
http://help.sap.com/saphelp_nw04s/helpdata/en/dd/cea14119eb9f09e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
Ramesh

Does not support public parts with purpose assembly...

Hi,
When building a component, I'm getting the following error:
Server Component/Library DC does not support public parts with purpose 'assembly'.
Error: Build stopped due to an error: Server Component/Library DC does not support public parts with purpose 'assembly'.
Build plugin finished at 2011-03-24 12:12:40 GMT+01:00 (CET)
Total build plugin runtime: 0.311 seconds
Build finished with ERROR
To be more precise, one dc uses another from a public part that is "assembly" - so it's made the way it should be (both dc's are libraries, one java dc and the second one is server library)

Hi,
we are with NWDS 7.20 but afaik the "J2EE Server Component Library" in your version was replaced by Enterprise Application DCs in the meantime, so it is quite simple:
An assambly PP on a J2EE Server Component Library really does not make sense. The J2EE Server Component Library is the final assembly unit. You may use such a DC in two ways:
1. You want to use the classes that are bundled into the J2EE Server Component Library for compilation in another DC (Java or EJB). To achieve this you may create a COMPILATION PP on the J2EE Server Component Library that references compilation PP e.g. of your java DC. (The alternative is to let the using java DC directly reference the compilation PP of your Java DC.)
2. You have another assembly unit - e.g. an Enterprise application or another J2EE Server Component Library - that needs the classes in your J2EE Server Component Library at runtime. This is done by an application reference (in 7.20 defined in META-INF/application-j2ee-engine.xml of the DC that uses your J2EE Server Component Library). At runtime, the result is that your (initial) J2EE Server Component Library is the "parent class loader" of a using DC.
So indeed, there is no need for a PP of type assembly for a J2EE Server Component Library. This DC does not contrubute anything for assembly into another DC.
Rework your dependencies and PPs. [This PDF document|http://www.google.de/url?sa=t&source=web&cd=21&ved=0CBwQFjAAOBQ&url=http%3A%2F%2Fwww.sdn.sap.com%2Firj%2Fscn%2Findex%3Frid%3D%2Flibrary%2Fuuid%2F60d99678-1a29-2d10-94b4-9d9a67b7199b%26overridelayout%3Dtrue&ei=C1aSTZzgHsj0sga6l53QBg&usg=AFQjCNFGx2NeVkfWlnh0wGKsMasL95g18A] may be helpful.
Cheers,
Rolf

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

Ios email app does not support user name with multiple "."

I have two gmail email addresses and have both set up on my ipad, however the ios email app cannot connect to the gmail server for one of the two accounts. Account settings are strictly identical and connection from the Gmail app works fine. The only difference I could find between the two accounts is that the one with connection issues uses a format of "[email protected]" whereas the one that works fine is "[email protected]". Is it a known bug that the ios app does not support the first format?
Thanks

Yes, double dots/periods are not allowed.

My Satellite A100 does not support SDHC cards with the internal card reader

Hi,
My satelite A100 does not support my sandisk 4 GB SDHC card.
"normal" SD cards are not a problem with the internal card reader, and there are no problems with the sandisk 4 GB SDHC card using a external card reader.
is there a software solution?
regrads,
Itock

I do not have time to read users manuals for your notebook model but all supported cards can be listed there. I suppose SDHC is not listed and not supported.
I do not know what you mean with software solution but, as far as I know, update for multimedia card reader is not available.

Autotrace does not show SQL Query Results

In the previous versions of SQL Developer, the query results will be shown in the Results tab when running the SQL using Autotrace. However, in SQL Developer v2, I cannot find the query results when I run the SQL using Autotrace. Are there any options or settings to turn on the query results in autotrace?

Please do not duplicate threads (original Autotrace does not show Query Results only makes you and all of us lose time.
If nobody answered, that would probably indicate a NO.
You can request this at the SQL Developer Exchange again, so other users can vote and add weight for possible future implementation.
Sorry,
K.

K8 T Neo Does Not Support Acpi 2 With Current Bios.. No Chance Of Cool N Quiet

Hi guyz
If you read the Readme that comes with the Athlon64 driver from AMD, let me quote: "This driver supports processor performance control via the processor objects defined in the ACPI 2.0 specification."
Well check ACPI verstion in Sandra, the current BIOS and board only support verstion 1.. no wonder the CPU is not speed stepping as it should with CoolNQuiet.
Any one here ever see there CPU speed step? If so give us all the specs and details.
Hope MSI will fix this, I don't get it.. they have a page http://www.msi.com.tw/html/e_service/techexpress/tech_column/6702/page11.htm where they show how to enable it.
BTW don't try to tell me I have a CPU that doesn't support it cause I do.. checked today, gt an AO ending on the model string and that one supports CoolNQUiet.
Simon
Simon

Good find!
New bios please.

OWB 9.0.4 :SQL*Loader: Operator POSTMAPPING does not support

Hi,
While trying to poulate Analytical Workspace using WB_LOAD_OLAP_CUBE, I got the following validation error
The analysis of the mapping is not successful under all supported languages and operating modes. Detail is as follows:
SQL*Loader: Operator POSTMAPPING does not support SQL*Loader generation.
ABAP: Operator AWPARAMS does not support ABAP generation.
I dont know what that means. Your help will be appreciated. Do I need apply some post 9.2.0.3 patch?. If yes, please let me know the patch number if available.
FYI: I am using Oracle9i with 9.2.0.3 patch
Thanks
Panneer

Panneer,
Does the regular process load from a flat file into a table? This would be implemented as SQL loader mapping... in which case a PL/SQL call cannot be implemented.
What you could do:
- Use an external table to read from the flat file.
- Use the transformation in a process flow. I.e. you first execute the SQL loader mapping and then execute the transformation.
Mark.

SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
OS: Windows Server 2008 Enterprise x64
IE: 9.0 32bit
webcient service is runing
HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
Anybody knows how?
Thanks.

Did you add your site to trusted site list?
http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
--Cheers

"This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x"

Hi, I have installed vmware 5.5 hypervisor on hp G8 microserver. I have created one vm as windows 2008 R2. I have also install vmware workstation 11 on this vm. In this workstation when I tried to run vmware 5.5 hypervisor I come across "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x" this statement. Which shows that the host machine does not support virtualization and for that you need to go in Bios and enable it but in present case as host machine is also a vm and you would not find much detail of Bios when you log into the Bios therefore, I am pretty much stuck here. I don't see any information in relation to this. Now my question is:
1. Can we run ESXi inside a vm which is already sitting on ESXi?

I moved the discussion from VMware Workstation to Nested Virtualization which contains several hints on what's possible and what needs to be configured to make things work.
André

Does WLS support Debugging Servlets with JBuilder 3 ?

I have read all the news groups and it appears that WLS 4.5.1 does not
support debugging Servlets with Jbuilder 3.0.
I am using the trial version, does this matter ?
Or should I just buy another web server ?
Joe

I think below documents will be helpful to you.
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/webservices/webservicesecurity/CreateDefaultWSSConfig.html
This document tell you that you can attach a weblogic webservice configuration using weblogic admin console.
After creating this configuration you need to updated this configuration as per the steps given under :
Use X.509 certificates to establish identity
Thanks,
sandeep

Hosting company does not support SQL query with OUTFILE clause

Similar Messages

Maybe you are looking for