Hosting company doesn't allow debugging on

If my hosting company (crystaltech.com) doesn't allow the coldfusion adminstrator debugging to be turned on, is there anyway I can still get the debug message to display on my broken page? I have an old cf app (MS SQL 2005) I'm trying to debug. It's currently on a coldfusion 9 shared server, written with fusebox. Any ideas? Thanks! -Jim

copy the app to a development location which has debugging enabled.

Similar Messages

HT5919 My company will not allow us to download iOS 7 due to software / security issues on our end. The problem is I need to download numbers but it says I need iOS 7. Is there any way to get an earlier update that's doesn't require ios7?

My company will not allow us to download iOS 7 due to software / security issues on our end. The problem is I need to download numbers but it says I need iOS 7. Is there any way to get an earlier update of numbers that's doesn't require ios7?

Thank you so much! It's updating now. I'm hoping that once the update is finished that it will sync like normal as well. Of course I'm still a bit confused/concerned about how it refused to update on it's own, but for now that's not a problem. Hopefully from now on there won't be any more problems.

What do I do when trying to send a reply email and it won't send because it doesn't allow relaying?

What do I do to be able to send a reply email when the response is it doesn't allow relaying?

Try this and see of you can get the reply to go through.
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
How to fix
If this is an AOL issue, try these: go Settings > Mail, Contacts, Calendars > select your AOL.com account > SMTP from the Account Info Page > SMTP from the SMPT Page > make sure that the Server is ON, make sure that the Host Name is smtp.aol.com. Further make sure your username and password are correct and added in the Outgoing Mail server; make sure that Authentication is set to Password and make sure that Server Port is 587
If this is not an AOL email: go Settings > Mail, Contacts, Calendars > Accounts >Account Info > SMPT> turn off primary server, turn on other (e.g. AT&T) SMTP server.
Go into Settings > Mail, Contacts, Calendars > Your Account > Outgoing mail Server SMTP > Primary Server then turn Server ON and fill in both User Name and Password under Outgoing Mail Server.

Hosting company does not support SQL query with OUTFILE clause

From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database. Unfortunately, I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
Thanks. George

Maybe this external Export Mysql data to CSV - PHP tutorial will be of help
Cheers,
Günter

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

What to look for in a web hosting company for Flex applications

Hello,
I am trying to figure out what I need to look for in a web
hosting company if I want to deploy my own Flex applications? I
don't anticipate having any special requirements other than the
ability to interact with databases and XML files. Can someone help
me figure out what the server-side requirements are?
Thanks in advance!
Matt

then almost 99.9% hosting will work.
if you want a Flexx app with compiler then oo thats different
but as you say "I don't anticipate having any special requirements
other than the ability to interact with databases and XML files"
then you can go with pretty much any hosting, as long as they have
apache, Database serve and I think thats it.

HT5527 How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."

How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."
The only way it allows me to click "next" is if I choose the $100.00 plan. The email that was sent to me says that I should upgrade or reduce storage because my plan will be reduce to 5GB as of September 30, 2013. Please advise.

Try Settings>iCloud>Storage & Backup>Change Storag Plan. If you are a former MobileMe user you should see Purchase Current Plan listed between the 20GB and 50GB options.

Transaction type 148: affiliated company indicator not allowed

I am trying to create new transfer variant for intercompany asset transfers, but when saving I am getting error AC768 Transaction type 148: affiliated company indicator not allowed'.
Interesting, transaction type 148 is not used in any of the existing transfer variants. Even if I don't change anything in any variant I am still getting this error message. I switched it off in t-code OBA5 (after adding it in OBMSG), but I am still getting that error message and I am not able to create new transfer variant.
Is there any other option that to modify this transaction type 148? It is standard so I don't want to modify it.

Hi,
please go to transaction OABE and try to tick the Gross transfer indicator. kindly provide feedback if it solves your current error.
Regards,
otep

Migration Assistant doesn't allow me to choose what drive.

Well, I got my new computer. I tried to migrate a drive from my old computer using Migration Assistant. and it doesn't allow me to choose what drive.
In my old computer I have 5 drives. The original HD (was 10GB, was replaced last year by a 40 GB) and on my Hitachi 250 GB drive that I added 2 years ago, there's a partition with 4 drives.
I wanted to migrate one particular drive from there (called Current work).
First I did a mistake. I connected both computer via the firewire in the afternoon when there was enough daylight so I don't have to do it later at night (the computers are under the table.) I thought it's OK since I'm not pushing any button yet ("migrate now", "transfer", and such).
I turned on the new computer and a message appeared: you must restart.
That's strange, I said to myself. it's a brand new computer. Usually It says that when there's a problem, but OK I restart and when it's back on, I see that my external drive (Neptune from OWC which was still hooked up in the old computer) is on the desktop. And it took just a few seconds. I open it and all the files, etc. are there. It did copy the whole external drive !
I'm not an computer expert but I believe the Mac Pro did notice that's there's a firewire hooked up and then, without asking me, migrated the external drive and that's why it asked me to restart. I would have prefer if it tells me "restart so migration can begin".
I don't mind for now that my external drive is on my new computer. I can always erase it if I don't want it. It is still external right ? so it doesn't intrude on the 640 GB of my HD so I just keep it.
But it also copied/migrate Mac HD 40 GB which is full of OS 9 and I almost never use it anymore. I don't want it coz it has applications and they advise not to migrate applications (certainly not applications with issues).
They say migrate folders, settings but re-install applications.
And it migrated also another drive called "Scratch" which has only personal date no system, no software.
Anyway, I erased everything and re-installed using the Install disk that came with the computer.
BTW, what they say in the manual (p. 90: Re-installing the software that came with your Mac Pro) is different than what really happens.
They say insert disk, double- click on Install and then click options in the "Select a destination" pane of the installer. Then click "erase and install" Problem is: there's no "Select a destination" pane. Or any options.
I had to go to Disk utility and erase, then re-install OS X.
Then re-install the applications using "Install applications" (the other disc that came with the computer. )
OK, I did that. Then while everything is empty, new, I used Migration Assistant.
Now here is the reason why I post this.
They say hold T key until you see a firewire icon then select a drive. I can't see when there's an icon coz I have only one monitor, so I just hold and hold the T-key and turn on the old computer. The screen shows "waiting for you other computer to restart" 2 min.... 5 min... 7 min. Nothing happens. I stop holding.
I look at the desktop and I see that the icon of the old 40 GIG Mac HD is there. (and I believe with a firewire logo, but not sure about that.)
I have the impression that if I kept the T-key longer it would have migrate the other drives as well.
They say keep the T-key down until you see the firewire (then let go I suppose. As I said I don't see what's going on on the desktop of my old computer so I kept the T-key for a few minutes. I also tried another time to let go after 1-2 min. No difference.
I shut down the new comp. and the old computer screen appears automatically (both are connected to the monitor; the old with analog port, the new with digital port) and sure enough the firewire icon is moving on the screen.
I go back to the new computer and put the old 40 GIG Mac HD in the trash. Actually, when it touched the trash, I just saw an eject icon and the drive disappear. Did not go in the trash which is empty. So I guess I ejected, not sure what's the difference but I looked for it to see if it's anywhere in the computer. Could not find it. Not in the HD, not in the desktop. Good, I don't want it there. Is it hidden somewhere ?
So I tried again but wondering perhaps the old computer should RESTART not turn on (it was off) so now I wait until it's on, then push restart. I hear the gong when it shuts off but that's it, no other gong when it comes back. I keep the T-key. But nothing happened. Just see the message "waiting for your other computer to restart"
PS: BTW Target mode (which seems to me similar to Migrating with "Migration Assistant") will not work for me because it must be SATA, mine is ATA.
I didn't try but read that it has to be SATA.
Is it the same ? In migrating they say hold down the T-key (T for target)
And how come that my 40GB HD which is ATA did migrate (not that I wanted too but still).
Also, this drive ("Current Work") that I want to migrate to the new computer is in my external drive. Can't I just drag it ? If it has only personal data, files and folders I know I can, but It has system (OS X) and applications. It's the one I use and boot on, in my old G4 but I want to transfer Files and folders and settings, so the new computer will know what are my Safari preferences, Automatic fill-in, and perhaps it will move my iTunes music Library too ?
Basically everything except applications. Although I would like my Nikon scanner to be in the new computer as well as the LaCie DVD recorder but I guess I can do that later, separately ?
What are the settings or info I need ? Because if it's just Safari preferences, automatic fill-in and other such small thing, it might be better to just do it again in the new comp and forget about the hassle of migrating.

Try getting into Windows and then plugging in the Superdrive. The drive will only be attached to one OS or the other, not both.

How do I edit a document I saved? It doesn't allow me to edit, just fill in on top of my entries

How do I edit a document I saved? It doesn't allow me to edit, just fill in on top of my entries.@

Adobe Reader (the focus of this forum) cannot edit PDF files (Adobe Reader is only a PDF viewer).
Be well...

Pages 5 Document Endnotes doesn't allow text continuation onto next page?

For large blocks of endnote citations, Pages 5 doesn't all the text to flow down to the end of the page before going to the next. Rather it treats the endnote text area as its own section, thereby moving the entire text box to the next page. This is problematic from a formatting standpoint because it wastes page space, does anyone have a workaround or suggestions?
Example:
Citation 5 is long but I would like to keep it on the same page as Citation 4 and just let the text continue onto the next page. However Pages 5 doesn't allow me to adjust the endnote text box and just jumps to the next page. Rarely do you see endnotes arranged in this manner in high-level research reports and we can't have this.

I exported a PDF from Pages v5.2.2. This uses Apple's Quartz PDFContext, not Quark.
In Windows 7, I opened this PDF with Adobe Acrobat Reader v11.0.09. I then copied/pasted a paragraph of this PDF content into LibreOffice Writer (v4.3.2.2). Since there was Baskerville in Windows 7, this comment pasted correctly including font-size. I did not have to make any adjustments to LO to accept this text.
On Ubuntu Linux 14.04, with the latest updates, I opened the same PDF in Evince, the default PDF viewer. Adobe does not offer an Acrobat Reader download for Linux. Again, I copied and pasted a paragraph of content from the PDF viewer into LibreOffice Writer. As there was no Baskerville installed, Writer defaulted to the Liberation font, at the correct point size.
In either of these platform scenarios, there were no anomalies with sentence/paragraph newlines .vs. carriage return issues from the PDF document during copy/paste operations. These were default control-v pastes that did not use the Paste Special menu item in LibreOffice.

Trying to change the country from my apple account!!!and doesn't allow me to!

Hello, i'm trying to change the country of my apple account to get in to the istore online from my country and the system doesn't allow me to. It says that i have to buy something for $0.43 that i have on my account but i've never buy or anything b4.help!
I don0t know how but when i entered the first time to Apple ID, i've already had an account... and i've never created one!
Just was created with my same hotmail account and i am using it since then..... (4 or 3 years ago).
This account is from US.
But each time that i try to change to a peruvian account to enter itunes.... and maybe get a purchaise... it says that i am not allowed!!!
And i want to cancel the money i have in the "ghost account" that i've never purchaise... and set a new one with $0.00 !!! to start to used it....!!!!
Please give me a solution right away!
Best regards.
Rosa Elena

Click here and ask the iTunes Store staff to zero your account balance.
(99669)

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

1. Use the mouse to select the field and then press the space bar.
2. A null string is the same as zero. What is the result for division by zero?

HT1918 I moved to another country and would like to change the billing country for the credit card. It doesn't allow me to switch the country only street etc.. Do I have to create a new account separately for a new country?

I moved to another country and would like to change the billing country for the credit card. It doesn't allow me to switch the country only street etc.. Do I have to create a new account separately for a new country?

Nope. You can only have one credit card attached to an account at a time. Its not that big of a deal to use two accounts, users do this all the time. Create the second account(UK Account) in iTunes on your computer...sign out of your Italian account first. Then authorize your computer for this new account: Store>Authorize this computer. Then sync your phone. Now, to switch accounts on your phone: Settings>Store...tap the ID shown...sign out...then sign back in with the ID you want to use.

Bridge doesn't allow me to turn on color management

Any idea why Bridge doesn't allow me to edit/turn on color management? When I go to Edit>Creative Suite Color Settings I just get an error. Says I must launch at least one qualifying CS product. As I have Dreamweaver CS5.5 and PS CS5 running I never know what the issue is. Any ideas? Adobe help is useless on this.

If that is the case, Adobe needs to do a better job in how the settings function. For example, instead of just getting an error message with a confusing statement, the message would provide further clarification and also solutions. The message says one needs to have at least one program running to set up color management. It doesn't say one entire color suite. But thanks so much for responding to my questions.
A bit of the problem is that writing a manual and a help file is not that easy at all. But when it comes to complicated applications like PS and combined with other applications it really is a difficult task. I'm not saying Adobe succeeds clearly in this task because it is not easy to find your way in the new help files but with a bit effort you will soon explore there is a lot of information about understanding color in the PS on line manual (use the menu help / Photoshop Help and your browser shows a page from product support. Top right above there is the option to download the PDF manual. And in the provided list on your browser window you see also the option for Creative Suite, click on it and you will see a complete chapter about Color Management.
While I know a bit of this subject I'm certainly no expert. It is a complex matter but the basics are not that difficult and the result of your learning effort will pay it self back
Another issue I have noticed is that Bridge does not do a good job at updating thumbnails. I frequently have to hit F5 to refresh when this should happen automatically. I use a Windows 7 machine and perhaps all of this works better on Macs - I don't know.
That should not be needed on either Mac or Windows. While no knowledge of Windows at all to me it seems related to a cache problem. First point Bridge to the folder that gives you this problem and then choose the menu Tools/ cache / purge cache for folder. See if this gives better results. If so and you have other folders with same problem use the option to purge the entire cache and have a fresh start. You need a bit of time because all thumbs and previews have to rebuild.

Hosting company doesn't allow debugging on

Similar Messages

Maybe you are looking for