Hosting solution engine 1.8.2

I am running a HSE 1.8.2 and have a problem in creating a ROLE with only Monitoring access to see status of services?
In version 1.7.2 it was possible to create a user with the role HOSTING (this user then only had monitoring access to see status of services at e.g. CSS)
How do i create such a user ?

You may have better luck if you post this question in the "Content Networking" section under Emerging Technologies.
I'm not aware of anybody using HSE for VPN management.

Similar Messages

  • ACS 4.2 Solution Engine - Most current?

    We have two Cisco ACS 1113 4.2 "Solution Engines" running Windows. They are in test. Is this the most current software base for the 1113? My memory is telling me there was a Linux-based version in the works. Is that true? Is that available?

    Thanks! That pretty much ansers my question. ;-) At http://www.cisco.com/go/acs I read:
    "ACS 5.0 currently supports many but not all access scenarios. ACS 4.2 will continue to be available for customers that require it"
    That puts the fear in me that an upgrade may be a requirement in the future - and will involve a complete appliance swap-out. Hopefully the 1113's with 4.2 have a few years in them?

  • How do we determine the HTTP authentication header for our hosted solution?

    How do we determine the HTTP authentication header (adobeconnect_admin_httpauth) from our hosted solution? The documentation says to find it in a custom.ini file but I have no clue how to access that.
    I need to supply that to the adobeconnect plugin used with a Moodle instance, screnshot below.
    If it helps, when I click "Test Connection", I see the following output.
    A series of tests have been run in order to determine whether the Adobe Connect Pro server has been properly setup for this integration to work and to also determine whether the user credentials provided in the activity global settings has the correct permissions to perform the neccessary tasks required by the activity module. If any of the tests below have failed, this activity module will not function properly.
    For further assistance and documentation in how to set up your Adobe Connect Pro server please consult the MoodleDocs help page for this activity module Help page
    Sending common-info call:
    successfully obtained the session key: na11breezrirhb4f4ryf5shqy
    successfully logged in as admin user
    Testing retrevial of shared content, recording and meeting folders:
    error obtaining shared content folder
    XML request:
    <?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
    XML response:
    <?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
    error obtaining forced-archives (meeting recordings) folder
    XML request:
    <?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
    XML response:
    <?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
    error obtaining meetings folder
    XML request:
    <?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
    XML response:
    <?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
    error creating meeting testmeetingtest folder
    XML request:
    <?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-update</param><param name="type">meeting</param><param name="name">testmeetingtest</param><param name="folder-id"/><param name="date-begin">2015-03-14T06:53:39.000+00:00</param><param name="date-end">2015-03-14T07:53:39.000+00:00</param></params>
    XML response:
    <?xml version="1.0" encoding="utf-8"?> <results><status code="invalid"><invalid field="folder-id" type="id" subcode="format"/></status></results>
    error creating user testusertest
    XML request:
    <?xml version="1.0" encoding="UTF-8"?> <params><param name="action">principal-update</param><param name="first-name">testusertest</param><param name="last-name">testusertest</param><param name="login">[email protected]</param><param name="password">9B396EA828A00203FB3E8E69010FE537</param><param name="extlogin">[email protected]</param><param name="type">user</param><param name="send-email">false</param><param name="has-children">0</param><param name="email">[email protected]</param></params>
    XML response:
    <?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
    What are we missing?
    Thanks!

    Here is the docuementation for loging in with an HTTP Headder Adobe Connect 9 * Log in from an application
    Seeing as there may be some modification to files on the server, you may need to work with Adobe Support to see if they can be modified in the Hosted environment.Adobe Connect Help | Adobe Connect Support

  • ACS 5.2 Solution Engine Patches and Installs

    Hi
    Im trying to upload the 5.2 patches to the ACS Solution Engine so i can install the updates.
    Does anyone know how to do this or know the links that show how to do this??
    The User Guide documentation isnt very helpful.
    Thanks
    Marco

    Hi Marco,
    Here is the link for downloading ACS5.2 patches :
    http://www.cisco.com/cisco/software/release.html?mdfid=283107438&flowid=18604&softwareid=282766937&release=5.2.0.26&relind=AVAILABLE&rellifecycle=&reltype=latest
    Downlaod  any patch  and place in the   FTP/SFTP  server in your enviroment
    Login to the ACS CLI :
    Create a repository:
    acs/admin(config)# repository myrepository
    acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
    acs/admin(config-Repository)# user luke password skywalker
    acs/admin(config-Repository)# exit
    after that run this command :
    acs patch install patch-name.tar.gpg repository repository-nameInstalling an ACS patch requires a restart of ACS services.Would you like to continue? yes/no
    once done you can do a sh version and see the acs5.2 with the new patch.
    Also when you download the patch there is also read me with similar instructions.
    Herre is the link for acs5.2 patch 5 read me link :
    http://www.cisco.com/web/software/282766937/37718/Acs-5-2-0-26-5-Readme.txt
    Thanks
    Waris Hussain

  • Adding Users on Cisco Secure ACS Solution Engine 3.3

    We have a large block of userids we need to add to our ACS 3.3 Solution Engine into the CiscoSecure User Database. When using the web-based GUI, it looks like you can only add one user at a time. Is there anyway to add users as a block with some type of command line, or is there a utility that will add users and also copy user options? It would be helpful if in the Add/Edit user panel, there was the ability to copy settings from a previously installed user definition.

    I'm not sure that csutil would setup all the parameters I need, so I would have to choose CSDBSync. Tacacs is used and not Radius. I need the user to initially be configured disabled, specify his/her real name and description, assign the user to a group, assign a PAP password and confirmation, use group settings for callback, client ip address assignment, and max sessions, establish a date to automatically disable the account, provide no enable privileges, and set a Tacacs+ Outbound password.

  • Upgrade path for Cisco Secure ACS 4.X Solution Engine 1113 Appliance.

    Hello,
    I am having Cisco Secure ACS 4.X Solution Engine 1113 Appliance, and is running on version Cisco Secure ACS Release 4.1(1) Build 23 and now want to upgarde it to the latest version. Need to know the upgrade path for the same. As per my information ACS 4.1(1) runs on windows server and releases post to 5.X uses Linux. Please guide how can i upgrade Appliance 1113 from 4.1 to 5.x

    Hi,
    Cisco ACS 1113 appliance doesn't support ACS 5.x version. 1113 appliance supports till ACS 4.2.1 version.
    Cisco ACS SE 1120/1121 appliance models are required for ACS 5.x
    The upgrade path for ACS 4.1 to 4.2.1 version can be found in the following link :
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2.1/Installation_Guide/solution_engine/upgap.html#wp1237189
    Regards,
    Karthik Chandran
    *kindly rate helpful post*

  • License & Installation for Hosted Solution

    I deploy my small applications (Tomcat with PostgreSQL) in a
    Hosted environment (eapps). I pay all of $30/month so I don't
    command multiple processors. All I do is drop WAR's into Tomcat
    webapps! I am concerned about the OS versions of Flex Data
    Services. Do they need to do an installation? They have: Operating
    Systems - CentOS 4 Linux (white label version of Red Hat
    Enterprise)
    If this is a problem are you aware of a hosted solution with
    Flex Data Service, Tomcat, JBOSS & PostgreSQL?

    This is an important question that I would love to get a
    straight answer to. I have been trawling the web trying to find an
    answer to this to see what kind of hosting plan I need to get to
    run FDS. I cant seems to find a definitive answer! Now from the
    bits of information I can gather and through intuition I know that
    with a VPS I can install and configure FDS since you download FDS
    as an OS dependant executable and not as a webapplication archive -
    yet as I understand it Flex Data Services is only a webapplication
    that can run within Tomcat as seems to be the case with the demo
    installation - is this correct? If so why can I not install the
    application on a standard shared tomcat host?

  • ES4 as a managed hosted solution

    Hi there does anyone know where I can get the full ES4 suite as a hosted solution, ( i work for a small organisation and we cant afford to buy the full suite outright), however if there is a hosting/cloud based company that offers access to this service, it would be within reach for our business). Although this may appear to be in the wrong category, its not as livecycle ES4 designer requires access to ES4 suite in order to create mobile foms.
    kind regards
    Keith

    Carl,
    I recently decided to make the switch from Ruby on Rails to Apex and I’m really impressed. I’m still learning Apex but I’ve accomplished with Apex in a week what would have taken me a month in Rails. In all fairness I must admit that I’ve never reached become more than an intermediate level programmer with RoR.
    The main problem I do have with Apex however is the availability of providers. At the moment I’m “hosting” at apex.oracle.com and it is perfect for developing my application and for the initial stages whilst my site “grows”; but I do have dreams that my little site will generate income one day and then I will have to start looking for an Apex provider.
    I for one would love it if Oracle allowed their current apex.oracle.com “clients” to upgrade to a paid service once they start earning $’s with their pet-projects. I would prefer a low basic monthly fee combined with traffic based rate.
    Maybe Oracle could work out a deal with Google so private individuals like myself can pay by placing Google adds on their sites; especially whilst the income of the site is low / insufficient to pay for the running costs.
    Thanks for a great product.
    Johannes

  • Maximum users on ACS Solution Engine 3.3

    Hello,
    I need to know the maximum supported number of users in the local database of the CiscoSecure ACS Solution Engine 3.3 (the appliance) ?
    Is there a document about this ?
    Thank you !
    Patrice

    The client version of Mac OS X supports a maximum of 10 AFP clients. It's always been that way.
    If you want more than 10 AFP clients you need to move to Mac OS X Server (unlimited) which can support any number of concurrent users.

  • Cisco Secure Access Control Server Solution Engine OR Cisco Secure Access Server ?

    Which product is really affected, the Cisco Secure Access Control Server Solution Engine which is a hardware applliance with software from 3.2 to 4.2 or the Cisco Secure Access Control Server Software appliance available for installing as a virtual machine into VMware ESX/ESXi 5.0 with 5.X software ?
    Thank you for clarifying
    Best regards
    Marco

    Hi Thomas,
    You can download ACS for windows 4.1 or 4.2 from the below listed link:
    http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-eval
    For ACS 5.x, please visit cisco.com
    Download software > Security  > Cisco Secure Access Control System 5.x  > Secure Access Control System Software
    HTH
    Regards,
    Jatin
    Plz rate helpful posts-

  • Cisco 5.0 ACS Solution engine

    Hi,
    Just installed and finished intail setup of ACS version 5.0 Sol. engine. Next i'm not able to acces solution engine over internet explorer. Even not able to telnet port 2002.
    Do i need to configure anything else for enabling gui in version 5.0?
    Please assist.
    Thanks!
    Kamal
    [email protected]

    ACS 5.x doesn't work on PORT 2002 like ACS 4.2, it works on https-443 so in order to use ACS 5.x, you should URL
    https://
    To log in to the GUI, you must use the predefined username ACSAdmin and password default. When you access the GUI for the first time, you will be prompted to change the predefined password for the administrator. You can also define access privileges for other administrators who will access the GUI application.
    Rgds, Jatin
    Do rate helpful posts~

  • Manage a Cisco Secure ACS Solution Engine?

    Hello,
    how can i manage/observe a 'Cisco Secure ACS Solution Engine'? Ich found no things like SNMP etc.
    regards
    Karsten

    Hi,
    you have no chance to control the ACS SE with snmp. We have one router, access via ACS and uses a script roboter to control the access to the router. If the access fails, we send us an email
    Bye Michael

  • SAP SMTP Configuration for Microsoft Exchange Online (Microsoft Hosted Solution for Exchange - Office365)

    Dear All,
    We are using Microsoft Exchange Online (Microsoft Hosted Solution for Exchange – Office 365) for sending and receiving emails. Now we want to setup SAP SMTP so that emails / notifications can be sending through SAP via Microsoft Exchange Online. It is quite easy to configure for setting SMTP Services for locally hosted Exchange Server. But this is the first time I am trying to setup for Microsoft Exchange Online.
    Current Instance Profile settings are as follows;
    is/SMTP/virt_host_1                         *:25000
    is/SMTP/virt_host_0                         *:*
    icm/server_port_2 PROT=HTTPS,PORT=44300,PROCTIMEOUT=300,TIMEOUT=600
    icm/server_port_1                           PROT=SMTP, PORT=1080, TIMEOUT=180
    icm/server_port_0 PROT=HTTP,PORT=8000,PROCTIMEOUT=300,TIMEOUT=600
    ms/server_port_0                            PROT=HTTP,PORT=81$$
    SCOT Settings are
    Mail Host             smtp.office365.com
    Mail Port              587
    Following are the settings for configuring Outlook for Exchange Online – Office 365;
    Server name
    Port
    Encryption method
    POP3
    outlook.office365.com
    995
    SSL
    IMAP4
    outlook.office365.com
    993
    SSL
    SMTP
    smtp.office365.com
    587
    TLS
    Please assist if any one configure office365 with SAP.

    Hello Majid,
    Were you able to setup SCOT for Office365 online, I have to setup same.
    Can you help with some guidelines on how you setup.?
    Regards,
    Ashish

  • Cisco Secure ACS 4.0 Solution engine problem

    Hi,
    I have a probleme with a Cisco Secure ACS 4.0 Solution Engine (CSACSE-1113-K9).
    I try to power up the engine, but the light in the power button stay blinking all the time. Anyone have a idea why ?
    Last week, I boot it for the first time (It's brand new), every things goes fine.
    I made " shutdown " then wait the message to press 4 seconds power button to turn it off. This morning, nothing come up.
    I see one thing in the console "Press <SpaceBar> to update BIOS." after that, blank. No bios detection, no harddrive dectection, no windows boot.
    Any idea ?
    Thank you

    No, I'm sur.
    Then we have version 1113 of ACS.
    See: http://www.cisco.com/application/pdf/en/us/guest/products/ps6731/c2001/ccmigration_09186a008068f7bd.pdf
    Page 32(1-8) #2.
    I let the engine off about 6hours after my first post, then I try back. The engine start.
    What can cause this problem ?

  • Cisco ACS 4.2 Solutions Engine replacement advice

    Hi everyone,
    I am hoping to get some advice on an upcoming upgrade.  We currently have a Cisco ACS 4.2 Solutions Engine.  (That's the physical appliance).  It is coming to end of support and we are looking to replace.  Here is what we use it for today:
    1. TACACS+ AAA for all routers and switches.  Gives us great reporting.
    2. PEAP Authentication for our wireless network off of a 5508 Wireless Controller.
    3. Machine Access Restrictions for our Wireless network.  (Basically Machine Authentication)
    I believe that is all we use it for today.  That said, hoping to get some of your opinions on a replacement.
    Any advice or opinions are greatly appreciated.
    Thanks,
    Josh

    Hi Josh,
      To add up to the above post, You will have to undergo the migration process from going to ACS 4.2 to ACS 5.4.
    Here is the migration guide:
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/migration/guide/Migration_support.html
    Regards
    Minakshi
    (Do rate the helpful posts )

Maybe you are looking for