Hosting Video Conference Calls over the Internet using a IP/VC 3540

A client wants to use his 3540 with 30 session MCU and rate matching card to host Video Calls consisting of participants both on his local LAN/WAN and participants coming in from across the Internet. Cisco's IP/VC design guide does not specifically address a situation like this so I am at a loss. Can someone point me in the right direction ? I am at a loss.

This is something that can be done. A couple considerations that need to be looked into are where the MCU and Gatekeeper are going to reside on the network. If you place the MCU and GK behind a firewall to be protected from the Internet, then you may need to open up ports on the firewall to allow for registration to the GK and calls to the MCU to happen. The MCU or GK could also be placed in a DMZ, or just the GK with the MCU placed behind a firewall completely. As you can see there are a few choices here but it is doable.

Similar Messages

Access USB HD over the internet using Windows?

I have my airport extreme connected to a USB hard drive an everything works fine at home. I have already configured the airport with my "me.com" info, but how do I access this drive over the internet using windows at work?
Thanks.

I would like to do this too. Did you figure it out?

How to share videos with family over the internet

I have a ton of home videos that I have edited with Final Cut and I would like to find a way to share those with family and friends across the country. Is there any way to do this in the Apple ecosystem. If not, what do most recommend as the best way to do this? Thanks

Thanks for the reply... I'm actually looking for something that would allow me to have all the content available in a library so friends and family can see all the content and then choose what to watch. Ideally, it would be like iTunes or iPhoto only that it could be accessed by multiple people from all over the internet. I think Apple is missing a huge niche in this area.

Transfering Files from one computer to another over the internet using ftp

I am not sure if this is the right section to post this question but i wanted to know if it was possible to use the mac ftp file sharing to transfer a file from a friends computer to mine. He is not on my network we were hoping to transfer the file over the internet the file is quite larger about 2gb. Can any one help me in telling me a way that i could do this thanks.

Enable FTP in Preferences on the target machine.
You will need the IP address...
You can find it by going here
http://whatismyip.com/
This may be a problem if the target machine is behind a router.
If all goes well... Go to Connect to Server.. and enter
ftp://ipaddress
OR
If you want to send a large file then you can check this out...
www.yousendit.com/

Unable to see Dashboard over the internet Using Enterprise Portal

Dear All,
I have one issue here which is bit technical,
I have made an Xcelsius Dashboard (Connection Type: Excel XML Maps (BW Queries)) and uploaded SWF file on to KM Repository in Portal. I have created Document iview and a role to published the dashboard on Enterprise Portal.
Now when i am trying to access that Dashboard from Portal within local network it works fine but when i try opening the same Dashboard over the internet from home it gives an error.
ERROR DETAILS:
To access external data, add a cross-domain policy file to the external data web server.
For more information, on the Adobe website, see the article u201CCross-domain Policy File Specificationu201D.
If the problem persists, contact the file creator or your system administrator.
Error: Error #2048
Connection Type: Excel XML Maps
File URL: https://www.portal.com/irj/go/km/docs/documents/dashboards/dashboard1.swf
External Data URL: http://bwserver.domain.com:8000/sap/bc/bsp/sap/zbo_data/Data.xml?infocube=ZFIGL_FM&query=ZFIGL_FM_Q0003_BO&VAR_NAME_1=0P_FYRA&VAR_VALUE_EXT_1=2009
I have added crossdomain into WebAppl Srvr of BW Server .. Created BSP Application ---> Imported crossdomain file ---> set BSP App in Default Service.
Please provide possible solutions

We have the same problem.
The Solution 1.
http://wiki.sdn.sap.com/wiki/display/EmTech/Addcrossdomain.xmlontherootofSAPWebapplication+server
and 2.
http://www.asabau.com/2009/04/crossdomain-policy-file-in-sap-web-application-server/
does not work.
How you have fix it?
regards
Chris

How can I remotely access files over the internet using iPhone? VPN? Do I need to use Server?

Please forgive my ignorance here, as I'm a Windows expert but have only been using Mac for two and a half years. Is it possible to securely access predefined directories on my iMac from a remote computer or device over the inernet, be it a MacBook Pro, iPhone or even a Windows computer or Android phone? Is there an advantage to an Apple-only approach (iPhone and Macs)? Do I need to use Server? Is VPN the method of choice, or is there some other method? I'm not looking to do remote desktop control, just remote file access. Right now I'm using DropBox for the things I need most, but I absolutely will not put sensitive information in there, and soon I will need to have access to more than what DropBox can hold. Also it may be worth noting that I'm currently an Android user but will be going back to iPhone soon if it would be advantageous in this regard.
Thanks!
Daniel

If you desire security, you definately want to use VPN so Lion Server will work. Otherwise, if you have sysadmin experience (or know someone who does), there are free alternatives out there for vpn that can be setup on a cheap linux server and provide the same capabilities.

I set my time capsule "Share disks over the internet using Bonjour"

how do I view my files? Is there something I need to download to do so? I use Mac OS X 10.5.8

I don't know exactly how, but I got it working. I will try to explain, what I did.
1. I used the easybox as DHCP-Server an set the TC to Bridge Mode.
2. Then I gave the TC a fixed IP in the easbybox menu by using it's MAC-address (It seems that the address range has to be either 192.168.X.Y or 10.0.X.Y to make the TC accessable later).
3. I made the TC a DHCP-Server (DHCP only, not also NAT). The IP addess range of the TC starts after it's own IP adress (10.0.0.111) and ends at (10.0.0.250). The IP range of the easybox starts with 10.0.0.1 (it's own) and end with the TC's (10.0.0.111).
4. Then the Airport Utility told me that if I want to share an DHCP range the TC has to be set to a fixed IP setting, which I set up, leaving the IP-address 10.0.0.111 and the Router IP 10.0.0.1 (the easyboxs').
5. Then it worked in my case. Since I don't even know what I did, I'm not shure if it workes under other circumstances.
There are of course many variables. Such as the type of the router and the TC or the kind of the internet connection.

Can I present a keynote file with video and audio over the internet? If so how?

I have tried this with Adobe Connect but it' not ideal since the frame rates drop dramatically and there is no sound. I can upload powerpoint files directly to Adobe connect but there is no option to upload Keynote files. I know I can export Keynote fiels to power point but this work-around is ugly.
-Idotel

Keynote takes over complete control of the graphics system to play the presentation, therefore the display that is not showing the presentation will be black.
The only time the monitor not showing the presentation can show video, is when using Presenter Diisplay in Keynote.

Backups over the Internet Using MobileMe Family Pack

I know how to configure an AirPort (AirPort Extreme, Time Capsule) to be accessible for Back to My Mac using a MobileMe account. However, we have a Family Pack. I am the Pack master, so I used my ID to set up Back to My Mac on my Time Capsule (and Air Port Extreme at our other location). This seems to just make the master account work. Should the master account enable all of the MobileMe family accounts to leverage Back to My Mac (and hence things like remote backups)?

Recent update to AirPort enables multiple MobileMe accounts to be used for BackToMyMac

How do I use airport utillity with Time Capsule(or any airport extreme) over the internet without mobile me? iCloud has disabled this function?

How do I connect to my Airports/time capsules over the internet using the mobileme function under icloud?

i want to do the same. i tried entering my @me.com account and does not work, but if I tried to go to icloud.com and using my @me.com works
why?
does the Airport express needs to be upgraded as well

How can I connect to my Mom's machine over the internet?

I installed ARD 3.6.1 on my laptop and was able to do a successful Intereact > Control to my Mom's machine from my machine while at her house, but when I went home to my house and tried the same thing I got the message:
"Connection failed to Mom's Computer. . . Please make sure that the Remote Mgmnt is enabled . . . Also make sure network connection is working properly."
Any clues?
Greg

Yes you can do this, connect to another computer over the internet using ARD--if you a person who likes to sleep on a bed of nails for the fun of it, who enjoys unanesthetized body piercings. But this product is not designed for this. It's designed for using on networked computers. After spending about ten hours tryng to make it work, I was finally told by a wise Apple support guy that while such a thing is possible, grasshopper. it's really hard and impractical, and even if you get it work, it probably won't stay working. I was given a refund and told to look for a more suitable product.
Voila, I found it! The logmein.com free product does everything I want. Everything! In less than 15 minutes.
My beef is with the Apple ARD website. Why don't they just say at the beginning:
Warning: Not designed to support your mother's frickin computer over the internet!
Would've saved 10 hours of grief and two calls to Apple Support.

Replication Manager - Syncing mdb databases over the Internet

Hai
I am new to access replication. I have been given the task of syncing two .mdb access 2000 databases with eachother over the internet using Replication Manager 4.0. I keep getting no or little reference on how to to this and was hoping I can get a full tutorial
on how to sync over the Internet using Replication Manager.

I think SQL*Net uses port 1525.

Anyone used VisionNet system "designed to provide real-time streaming video feeds over the Internet"?

I'm a Mac user and we only have Macs at home. My son just started preschool, which offers a VisionNet system--"a state-of-the-art system of cameras, servers, and software designed to provide real-time streaming video feeds over the Internet." However, on the VisionNet FAQ page, it specifies the following:
"You need a web browser that is Java-enabled, perferably Microsoft Internet Explorer. If you're running Microsoft Internet Explorer, it needs to be version 6.x or higher. We recommend Internet Explorer 6.x as this is the latest and most up-to-date product release. Some Windows XP and Windows XP Professional users will have do download a Java runtime environment in order to use the VisionNet system if they have not done so already."
We don't have any PCs at home, so I tried to log in using my MacPro desktop, my old MacBook Pro and my new MBP. Basically, for the last 3 weeks I've managed to access the site only ONCE from my desktop and after the time-out session, I wasn't able to log on ever again (I just cannot enter any keys on the Username and Password fields at login). If I hit the Logon button from the FAQ page, I get an "Unauthorized Access" pop-up message: "This site may only be entered from an authorized web site! Please enter this site from your childcare provider's web site." When I enter "OK" I immediately get a pop-up menu "Confirm Dialog Preference. Prevent this page from creating additional dialogs" but I still can't enter any keys at login. It does nothing!
The "support guy" has NO knowledge of Macs, so I don't know where else to go. The fact that I had successfully logged on once makes me believe it's something I have to update/delete/add in my Preferences in Firefox (I've used Safari and Chrome with no success). I've also considered purchasing an inexpensive PC just for this lousy VisionNet system but I want to see if anyone has any ideas or advice.
Can anyone please help me? Thank you in advance!

Here is a link to the finished PSA at Vimeo. It is not an outstanding production or anything too special, but it is worth noting that while some of the stills were doctored in Photoshop, the entirety of the editing and motion graphics were done in Premiere CS6.02; and the timeline playback was RealTime thanks to the MPE Hardware Acceleration and a GTX 560 2GB.
DUI PSA
Happy Editing.

Can not view video over the Internet on WVC80N

I set up the web cam, set up the port forward etc so now I am able to:
   1. view/change web cam settings inside my home network.
   2. view video inside my home network.
   3. view/change web cam settings over the Internet.
But I am not able to view video over Internet. Every time I did so (using IE browser), after clicking the view video button, I got an error : There are too many user connections or the device is busy, please try again latter.
Anyone has a fix on this? I set up port forwarding on port 1024 (that's how I can chage settings over Internet).
I spent 2 hours on the phone with Linksys tech support but they could not find the reason.
Thanks,
Sam

Who is your ISP? How you are trying to access your Camera from the remote location? Along with Port 1024 you need to do port forwarding for port 80 on your router for the Cameras IP address. As WVC80N works on your HTTP Port.
To access your camera from the Remote location, you need to use http://wan ip:80.

I just bought iWorks Serial Number Key over the internet. When I use the key, iWorks tells me the key is invalid!! Please help. (I bought this iWorks from someone in Singapore. I am using it in Malaysia)

I just bought iWorks Serial Number Key over the internet. When I use the key, iWorks keep telling me the key is invalid!! Please help. (I bought this iWorks from someone in Singapore. I am using it in Malaysia.). Thanks

Downloaded the Trial version. It still says the serial number key is invalid. On the iWork page where I am suppose to enter the serial number key, the "Go Back" button is always BOLD, but the "Continue" button remains GREY all the time. The "Continue" button remains grey even after I have completed the key entry. I have to type the "Return" key on my keyboard to force enter the key. The message I get is still "Invalid key".
I have called Apple. The first person helped by asking me to delete certain items in some Folders and it still did not work. I was then connected to a senior person, but I heard over the recording that there were 15 persons waiting on the line. I had to end the call because the wait will take too long.

Hosting Video Conference Calls over the Internet using a IP/VC 3540

Similar Messages

Maybe you are looking for