Hoston firm looking for LabVIEW Programmer Urgently

We are currently seeking to fill a LabView Software Engineer position for our client in Houston, Texas. We are a Houston, Texas based firm specializing in process optimization for industrial IT. We offer competitive compensation with good growth potential. For further information and to apply today, contact us at [email protected] or call 713-532-1280.

Please post your question to [email protected]

Similar Messages

I am looking for LabVIEW programmer job.

I am LabVIEW programmer with 6 years experience.
My expertise is optical communication, signal/image processing, C/C++.
I am living at Israel.
T.U in advance
Nadav Chernin
[email protected]

It sounds like you have solid experience. Have you considered contract work? The job market kinda sucks right now. Check out net-temps.com and jobcircle.com. Presently I work through a contract house called YOH Scientific, yohscientific.com in Newark, DE. I'm sure they could find you work but they'll skim a lot off the top. I worked with optical comm when I lived in Mass. Too bad it took a dive. I still see a lot of opportunities for RF comm in southern New Jersey. They usually want LabWindows/CVI. Since you know c/c++, LW/cvi would be a cake walk for you.
Parts of California are also looking hot. I just got this from my net-temps search agent:
1. Software Design Engineer
CA Valencia 6 - 9 months
http://www.net-temps.c
om/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53685XSLN
2. Sr. RF Test Engineer (San Diego)
CA San Diego 0 - 30 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt278/300278-3074-13-72416
3. Lead Test Engineer
CA Torrance 12+ months
http://www.net-temps.com/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53706XJDC
4. Lead Engineering 3
CA Torrance 180 - 365 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt272/300272-1063-13-72458
Good luck,
- Kevin

Looking for LabView Programmer in Seattle, WA

Water Tectonics focus is to provide innovative water quality processing solutions with select a group of individuals who value hard work, teamwork and personal initiative. Our applications/proprietary systems are utilized in industrial water processing to third-world water resource systems. We are looking for a person who wants to make a contribution to a growing company. I have outlined some general expectations for interested applicants. If you are please e-mail me at [email protected] with a resume if you would like to discuss this opportuntity further.
Requirements
Bachelors Degree in Electrical Engineering or Electrical Engineering Technology.
At least two (2) years of LABVIEW programming experience
CAD Experience
Experience with Microsoft Office Software
Ability to work with other technicians, engineers, and customers
Ability to communicate technical information both verbal and written
Responsibilities Include (but not limited too)
Control System programming and interfacing
Requirements defintion and evaluation
Writing up of system and test documentation
Electrical and mechanical print development and review
System wiring and mechanical buildups
Hardware installation
Regards,
Jason Mothersbaugh
Water Tectonics
www.watertectonics.com

Please post your question to [email protected]

Looking for labview programmer in singapore (project)

Hi
I am looking for some experienced freelace programmer that can help me in my school project.
The objective is to design a vi that help to caluclate angular gyro rate for a gyro test using Gyr lisy300al.
Any help will be appreciated.
thank you

Please post your question to [email protected]

Houston based company looking for LabVIEW programmers

Infodat in Houston currently has 2 openings for immediate hiring for the following:
Engineers to develop software applications for integration with various hardware and control systems primarily using LabVIEW. The position involves integration of projects, proposal generation, and maintenance and upgrade of existing applications. Exposure to the Oil and Gas industry is a plus.
Infodat’s major areas of focus and delivery are in the Oil and Gas industry with focus on the following:
§               Tests & Measurement
§               Data Acquisition and Control
§               Process Automation
§               Mobile Technology
§               Web-based applications
Please email resumes to [email protected] and [email protected]
For more information, please contact: Andy Bhardwaj at 281-851-9062 or via email at [email protected]
All inquires will be held in strict confidence.

You should [post in the correct forum here:
http://forums.ni.com/ni/board?board.id=JobPost

Looking for LABView Programmer with Electrical Engineering Experience ($75K-$85K)

If you wish to apply send resumes to: [email protected]
Position Summary:
Systems Engineer with experience in LabVIEW development, instrumentation interface and system control. The engineer is expected to develop the software and GUI, select and integrate necessary instrumentation to meet requirements and properly document design. In addition, the engineer is expected to be able to specify electrical and electronic interfaces necessary in the development of a system.
Essential Job Functions (listing most important first):
Will develop the software and GUI necessary to implement a data acquisition and control system.
Will select appropriate hardware instrumentation and control interfaces and integrate OEM and in-house equipment.
Will provide guidance in the development of electrical interface, schematic and wiring diagram of systems.
Will use electronic test equipment (Voltmeters, oscilloscopes, etc.)
Will generate software documentation such as requirement document, user manual, test procedures, test reports etc
Essential Job Requirements:
EDUCATION
Bachelor degree (BS) in computer, electronic, or systems engineering or a related technical discipline.
EXPERIENCE
Experience in LabVIEW development. Experience in PXI, DAQ systems, RS232 communications preferred. Five or more years of related experience.
REQUIRED SKILLS
Able to develop the software and GUI necessary to implement a data acquisition and control system.
Able to select appropriate hardware instrumentation and control interfaces and integrate OEM and in-house equipment.
Able to understand schematic and wiring diagrams.
Able to use electronic test equipment (Voltmeters, oscilloscopes, etc.)
Generate software documentation such as requirement document, user manual, test procedures, test reports etc
PREFERRED SKILLS
LabVIEW, Control & DAQ instrumentation, Serial Communications

Hi Andre,
You may get more success if you post to this forum:
http://forums.ni.com/ni/board?board.id=JobPost
Ray
( tbob, are you busy these days? )
Message Edited by JoeLabView on 11-09-2005 12:40 PM

Looking for a Programmer to Create A YouTube "Embed" Plug In

Hello everyone,
I am Looking for a Programmer to Create An Acrobat Pro "Embed" Plug In based on the free YouTube API.
The purpose of this is to be able to easily embed YouTube Video's within Acrobat documents so that It can stream the content into the PDF file.
Many have suggested to download the content and embed it, but doing so will violate the user agreement with YouTube plus it would increase the size of the PDF file consideribly.
If there are any Programmers out there that would be interested in taking this project on please let me know. I believe there is a real need for this tool which people would really like to have.
The programming goals for the project would be as follows:
1. Take the Free YouTube API and create a plug in for Acrobat that would allow you to easily embed content into any PDF.
2. The "Embed Plug-In" Would essentially allow you to just copy and past the embed codes from YouTube, Hulu, or any other web source that provides an "Embed Code" so that the content can easily be placed within the PDF. This embeded content could be videos, audio, playlist systems, ads, etc.. "anything with embed codes."
3. You would be able to select an area of the PDF for the placement, paste the code and then be able to resize the content window. i.e. for YouTube Files.
The Market for this is as follows:
- Web Based Magazines, or Flash Magazines that were created with Indesign, Acrobat then Flash. They can easily then create interactive content, with ads and multimedia. Anyone cab be interactive publisher then, no need for Flash Programming Skills.
- Educational Institutions that want to create lesson materials with Web Content.
- Business's that wish to share media elements from the web within PDF presentations.
If you need examples of how this might be used please contact me to discuss it further.
Thanks for your assistance.
Regards,
Robert
Robert Stewart
creativemind
New York

Since I only found the plug in yesterday I've only played with it a little bit.
First thoughts:
It works. It's easy to set up. I followed the instructions and I had a link working to our promotional video on youtube in only a couple of minutes.
Things I found:
I am using layers extensively in my pdf and wanted the plug in window to show up on only one layer. However as I mentioned before it doesn't do that so my workaround was to change the settings in the video to play in a floating window. However the plugin window is still visible if you do this, so my workaround was to reduce it to essentially a dot on the page and hide it on something pale grey! I created a button in InDesign and used that to fire the video.
Security stuff:
Obviously the pop up windows are somewhat frustrating but I see no way to get around them without doing what Joel suggested in his other blogs, which given the amount of users receiving my pdf and their varying competence levels with computers is not really an option. My workaround for that was to include a note explaining what to expect and do when they did show up.
For the future:
See if Adobe would make this an option in InDesign and usable within it's layers section. That would be awesome. I haven't had a chance to check out the addin Joel mentioned that might help with this in Acrobat. Have you?
Thanks for the other tips on embeding html etc - always good to find new ways get around problems.
Grahame

Looking for a Programmer to Create An Acrobat Pro "Embed" Plug In

Hello everyone,
I am Looking for a Programmer to Create An Acrobat Pro "Embed" Plug In.
The purpose of this is to be able to easily embed YouTube Video's within Acrobat documents so that It can stream the content into the PDF file.
Many have suggested to download the content and embed it, but doing so will violate the user agreement with YouTube plus it would increase the size of the PDF file considerably.
If there are any Programmers out there that would be interested in taking this project on please let me know. I believe there is a real need for this tool which people would really like to have.
The programming goals for the project would be as follows:
1. Take the Free YouTube API and create a plug in for Acrobat that would allow you to easily embed content into any PDF. The content must be PC & Mac Playable within the Latest Version Reader.*
2. The "Embed Plug-In" Would essentially allow you to just copy and past the embed codes from YouTube, Hulu, or any other web source that provides an "Embed Code" so that the content can easily be placed within the PDF. This embeded content could be videos, audio, playlist systems, ads, etc.. "anything with embed codes."
3. You would be able to select an area of the PDF for the placement, paste the code and then be able see a preview of the content, then be able to resize the content window. if it resizable like YouTube Files.
4. You need to be able to "Add" to the defined the "Trusted Source" from the Emebed Code information so that it does not require every instance of the content loading to require the user to select "Allow" each time it loads.
The Market for this is as follows:
- Web Based Magazine Creation, that turn into Flash Magazines that were created with Indesign, Acrobat then Flash. This process would easily allow anyone to create interactive content, with ads and multimedia. Anyone cab be interactive publisher with no need for Flash Programming Skills which is currently what is needed to achieve much of this process.
- Educational Institutions that want to create lesson materials with Web Content.
- Business's that wish to share media elements from the web within PDF presentations and Business Materials, such as training materials, Marketing Research, etc..
If you need examples of how this might be used please contact me to discuss it further.
I have a project that I am working on that needs this type of functionality and the deadline is approaching so I am seeking any and all help I can find to reach my goal. This Plug could also be a plug in to Indesign as well. Whatever it will take to reach the desired goal.
Thanks for your assistance.
Regards,
Robert
Robert Stewart
creativemind
New York

I think this is what you need.
http://blogs.adobe.com/pdfdevjunkie/the_youtube_widget_for_acrobat.html
Hope it helps.

Looking for labview training

Hi
i m looking for labview training with less cost in delhi or online training
Arul

we do provide labview training
please check www.jambhekar.com
my contact details
cell 9970168164
mail [email protected]
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

Kindly send me your resumes on [email protected]

Looking for sdk programmer (ocr) ?

hi looking for sdk programmer to create extraction tool to extract text from pdf with some additional features. please replay asap.
regards
ramnl

Hi Antonio,
You may check this: work from home
Thanks,
Gordon

Look for LabVIEW part time programming

Hi,
I am available for part time LabVIEW programming. Areaingapore.
Certified LabVIEW Developer.
Currently resides at Spore. Look for LabVIEW project.
Please email me at [email protected]
BR,
Bug Killer

you can visit my website: www.bjcyck.com

Looking for LabVIEW job

Dear Sir\Mam,
I am Rajmohan,i am looking for LabVIEW job.I have CLAD certification with 3 years experiance in Automation field,if you have any opening pls consider me.Herewith i have attached my Resume.i am expecting your acknowledgemet,Thanks
Attachments:
RAJMOHAN.doc ‏65 KB

You may have more luck in the specific LabVIEW Developer's Looking for a Job board: http://forums.ni.com/t5/LabVIEW-Developers-Seeking/bd-p/JobSearch
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Looking for LabVIEW drivers for Aritsu MS462XX VNA?

I'm looking for LabVIEW drivers for the Anritsu model MS4623D Vector Network Analyzer? Have gone to Aritsu's site and downloaded their tools but no LabVIEW source found. The other thing is whether anyone's developed LabVIEW interfaces to theirTools (Navigator or Power Tools or SCE)???

Hi,
Unfortunately, we do not have an instrument specific driver for this Anritsu model MS4623D. Here is a link to the drivers we do have for Anritsu. We may be able to get communication to your device threw another means. How does your device communicate? For example is it GPIB or Serial. We may be able to use an NI driver and a programming manual for your device and communicate with it in LabVIEW threw this.
Regards
Krista S.
Applications Engineering
National Instruments

Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

Hi,
There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
Multi-Environment Certified IVI Instrument Driver
Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
Try LabVIEW 7.1 FREE Online
If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
-John M

Hoston firm looking for LabVIEW Programmer Urgently

Similar Messages

Maybe you are looking for